mips: mtmips: move mt7628 related Kconfig into mt7628 subdirectory

This patch is a preparation for add a new soc fot mtmips.

Move all mt7628 related Kconfig (boards and UART selection) into mt7628
subdirectory and make sure the top directory of mtmips contains only
selection for SoCs.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
This commit is contained in:
Weijie Gao 2020-11-12 16:35:23 +08:00 committed by Daniel Schwierzeck
parent da41a56059
commit 451abbbedd
2 changed files with 54 additions and 52 deletions

View File

@ -58,57 +58,6 @@ config SOC_MT7628
endchoice
choice
prompt "Board select"
config BOARD_GARDENA_SMART_GATEWAY_MT7688
bool "GARDENA smart Gateway"
depends on SOC_MT7628
select BOARD_LATE_INIT
help
GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
config BOARD_LINKIT_SMART_7688
bool "LinkIt Smart 7688"
depends on SOC_MT7628
help
Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
and 32 MiB of flash (SPI).
Between its different peripherals there's an integrated switch with 4
ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
a MT7688 (PCIe).
config BOARD_MT7628_RFB
bool "MediaTek MT7628 RFB"
depends on SOC_MT7628
help
The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
1 SDXC, 1 PCIe socket and JTAG pins.
config BOARD_VOCORE2
bool "VoCore2"
depends on SOC_MT7628
select SPL_SERIAL_SUPPORT
select SPL_UART2_SPIS_PINMUX
help
VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
and 16 MiB of flash (SPI).
endchoice
config SPL_UART2_SPIS_PINMUX
bool "Use alternative pinmux for UART2 in SPL stage"
depends on SPL_SERIAL_SUPPORT
default n
help
Select this if the UART2 of your board is connected to GPIO 16/17
(shared with SPIS) rather than the usual GPIO 20/21.
source "board/gardena/smart-gateway-mt7688/Kconfig"
source "board/mediatek/mt7628/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"
source "board/vocore/vocore2/Kconfig"
source "arch/mips/mach-mtmips/mt7628/Kconfig"
endmenu

View File

@ -0,0 +1,53 @@
if SOC_MT7628
choice
prompt "Board select"
config BOARD_GARDENA_SMART_GATEWAY_MT7688
bool "GARDENA smart Gateway"
select BOARD_LATE_INIT
help
GARDENA smart Gateway boards have a MT7688 SoC with 128 MiB of RAM
and 8 MiB of flash (SPI NOR) and additional SPI NAND storage.
config BOARD_LINKIT_SMART_7688
bool "LinkIt Smart 7688"
help
Seeed LinkIt Smart 7688 boards have a MT7688 SoC with 128 MiB of RAM
and 32 MiB of flash (SPI).
Between its different peripherals there's an integrated switch with 4
ethernet ports, 1 USB port, 1 UART, GPIO buttons and LEDs, and
a MT7688 (PCIe).
config BOARD_MT7628_RFB
bool "MediaTek MT7628 RFB"
help
The reference design of MT7628. The board has 128 MiB DDR2, 8 MiB
SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
1 SDXC, 1 PCIe socket and JTAG pins.
config BOARD_VOCORE2
bool "VoCore2"
select SPL_SERIAL_SUPPORT
select SPL_UART2_SPIS_PINMUX
help
VoCore VoCore2 board has a MT7628 SoC with 128 MiB of RAM
and 16 MiB of flash (SPI).
endchoice
config SPL_UART2_SPIS_PINMUX
bool "Use alternative pinmux for UART2 in SPL stage"
depends on SPL_SERIAL_SUPPORT
default n
help
Select this if the UART2 of your board is connected to GPIO 16/17
(shared with SPIS) rather than the usual GPIO 20/21.
source "board/gardena/smart-gateway-mt7688/Kconfig"
source "board/mediatek/mt7628/Kconfig"
source "board/seeed/linkit-smart-7688/Kconfig"
source "board/vocore/vocore2/Kconfig"
endif