diff --git a/arch/x86/dts/chromebook_coral.dts b/arch/x86/dts/chromebook_coral.dts
index 965f59276a..9319123c0c 100644
--- a/arch/x86/dts/chromebook_coral.dts
+++ b/arch/x86/dts/chromebook_coral.dts
@@ -1,6 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/gpio/x86-gpio.h>
 
 /include/ "skeleton.dtsi"
@@ -99,6 +100,7 @@
 	clk: clock {
 		compatible = "intel,apl-clk";
 		#clock-cells = <1>;
+		u-boot,dm-pre-reloc;
 	};
 
 	cpus {
@@ -139,6 +141,7 @@
 	};
 
 	acpi_gpe: general-purpose-events {
+		u-boot,dm-pre-reloc;
 		reg = <IOMAP_ACPI_BASE IOMAP_ACPI_SIZE>;
 		compatible = "intel,acpi-gpe";
 		interrupt-controller;
@@ -417,8 +420,10 @@
 		};
 
 		i2c_2: i2c2@16,2 {
-			compatible = "intel,apl-i2c";
+			compatible = "intel,apl-i2c", "snps,designware-i2c-pci";
 			reg = <0x0200b210 0 0 0 0>;
+			early-regs = <IOMAP_I2C2_BASE 0x1000>;
+			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clock-frequency = <400000>;
@@ -429,6 +434,7 @@
 			tpm: tpm@50 {
 				reg = <0x50>;
 				compatible = "google,cr50";
+				u-boot,dm-pre-reloc;
 				u-boot,i2c-offset-len = <0>;
 				ready-gpios = <&gpio_n 28 GPIO_ACTIVE_LOW>;
 				interrupts-extended = <&acpi_gpe GPIO_28_IRQ
@@ -583,6 +589,7 @@
 				u-boot,dm-pre-reloc;
 				cros_ec: cros-ec {
 					u-boot,dm-pre-proper;
+					u-boot,dm-vpl;
 					compatible = "google,cros-ec-lpc";
 					reg = <0x204 1 0x200 1 0x880 0x80>;
 
@@ -658,6 +665,11 @@
 		PAD_CFG_NF(LPC_AD3, UP_20K, DEEP, NF1)	 /* LPC_AD3 */
 		PAD_CFG_NF(LPC_CLKRUNB, UP_20K, DEEP, NF1) /* LPC_CLKRUN_N */
 		PAD_CFG_NF(LPC_FRAMEB, NATIVE, DEEP, NF1) /* LPC_FRAME_N */
+
+		PAD_CFG_GPI(GPIO_101, NONE, DEEP) /* FST_IO2 -- MEM_CONFIG0 */
+		PAD_CFG_GPI(GPIO_102, NONE, DEEP) /* FST_IO3 -- MEM_CONFIG1 */
+		PAD_CFG_GPI(GPIO_38, NONE, DEEP) /* LPSS_UART0_RXD - MEM_CONFIG2*/
+		PAD_CFG_GPI(GPIO_45, NONE, DEEP) /* LPSS_UART1_CTS - MEM_CONFIG3 */
 		>;
 };
 
@@ -1211,3 +1223,9 @@
 		PAD_CFG_GPI(GPIO_73, UP_20K, DEEP)	 /* GP_CAMERASB11 */
 	>;
 };
+
+&rtc {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	u-boot,dm-pre-reloc;
+};
diff --git a/arch/x86/include/asm/arch-apollolake/iomap.h b/arch/x86/include/asm/arch-apollolake/iomap.h
index 21c5f33021..a4ea150707 100644
--- a/arch/x86/include/asm/arch-apollolake/iomap.h
+++ b/arch/x86/include/asm/arch-apollolake/iomap.h
@@ -33,6 +33,9 @@
 #define SRAM_SIZE_2		(4 * KiB)
 #endif
 
+/* Early address for I2C port 2 */
+#define IOMAP_I2C2_BASE		(0xfe020000 + 2 * 0x1000)
+
 /*
  * Use UART2. To use UART1 you need to set '2' to '1', change device tree serial
  * node name and 'reg' property, and update CONFIG_DEBUG_UART_BASE.