brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

km: remove obsolete definitions in KM header files

Browse Source 
After moving the KM specific configurations to Kconfig, the associated
preprocessor definitions can now be removed in the headers. Moreover, the
whitelist has been adapted correspondingly.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Pascal Linder 2019-07-09 09:28:21 +02:00 committed by Stefan Roese
parent 707f06f331
commit 432579c4d1
9 changed files with 0 additions and 109 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
board/keymile/common/common.h
View File

@ -120,10 +120,6 @@ struct bfticu_iomap {
u8 pb_dbug;
};
#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0
#endif
int ethernet_present(void);
int ivm_read_eeprom(unsigned char *buf, int len);
int ivm_analyze_eeprom(unsigned char *buf, int len);

6
include/configs/km/keymile-common.h
View File

@ -27,12 +27,6 @@
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* Support the IVM EEprom */
#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
/*
* BOOTP options
*/

4
include/configs/km/km-mpc83xx.h
View File

@ -3,8 +3,6 @@
*/
#define BOOTFLASH_START 0xF0000000
#define CONFIG_KM_CONSOLE_TTY "ttyS0"
/*
* DDR Setup
*/
@ -89,8 +87,6 @@
{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
{1, {I2C_NULL_HOP} } }
#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/
#if defined(CONFIG_CMD_NAND)
#define CONFIG_NAND_KMETER1
#define CONFIG_SYS_MAX_NAND_DEVICE 1

13
include/configs/km/km-powerpc.h
View File

@ -11,9 +11,6 @@
#define CONFIG_JFFS2_CMDLINE
/* standard km ethernet_present for piggy */
#define CONFIG_KM_COMMON_ETH_INIT 1
/* EEprom support 24C08, 24C16, 24C64 */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */
@ -45,20 +42,10 @@
/* size of rootfs in RAM */
#define CONFIG_KM_ROOTFSSIZE 0x0
/* pseudo-non volatile RAM [hex] */
#define CONFIG_KM_PNVRAM 0x80000
/* physical RAM MTD size [hex] */
#define CONFIG_KM_PHRAM 0x100000
/* resereved pram area at the end of memroy [hex] */
#define CONFIG_KM_RESERVED_PRAM 0x0
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM */
#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
#define CONFIG_KM_CRAMFS_ADDR 0xC00000
#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 7680Kbytes */
#define CONFIG_KM_FDT_ADDR 0xB80000 /* 512Kbytes */
/* architecture specific default bootargs */
#define CONFIG_KM_DEF_BOOT_ARGS_CPU ""

22
include/configs/km/km_arm.h
View File

@ -43,15 +43,6 @@
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
/* pseudo-non volatile RAM [hex] */
#define CONFIG_KM_PNVRAM 0x80000
/* physical RAM MTD size [hex] */
#define CONFIG_KM_PHRAM 0x17F000
#define CONFIG_KM_CRAMFS_ADDR 0x2400000
#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */
#define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */
/* architecture specific default bootargs */
#define CONFIG_KM_DEF_BOOT_ARGS_CPU \
"bootcountaddr=${bootcountaddr} ${mtdparts}" \
@ -103,13 +94,6 @@
#define BOOTFLASH_START 0x0
/* Kirkwood has two serial IF */
#if (CONFIG_CONS_INDEX == 2)
#define CONFIG_KM_CONSOLE_TTY "ttyS1"
#else
#define CONFIG_KM_CONSOLE_TTY "ttyS0"
#endif
/*
* Other required minimal configurations
*/
@ -124,7 +108,6 @@
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
#define CONFIG_KM_COMMON_ETH_INIT 1 /* standard km ethernet_present for piggy */
/*
* I2C related stuff
@ -246,11 +229,6 @@ int get_scl(void);
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* Do early setups now in board_init_f() */
/*
* resereved pram area at the end of memroy [hex]
* 8Mbytes for switch + 4Kbytes for bootcount
*/
#define CONFIG_KM_RESERVED_PRAM 0x801000
/* address for the bootcount (taken from end of RAM) */
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)

15
include/configs/km/kmp204x-common.h
View File

@ -113,21 +113,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);
/* size of rootfs in RAM */
#define CONFIG_KM_ROOTFSSIZE 0x0
/* pseudo-non volatile RAM [hex] */
#define CONFIG_KM_PNVRAM 0x80000
/* physical RAM MTD size [hex] */
#define CONFIG_KM_PHRAM 0x100000
/* reserved pram area at the end of memory [hex]
* u-boot reserves some memory for the MP boot page */
#define CONFIG_KM_RESERVED_PRAM 0x1000
/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable
* is not valid yet, which is the case for when u-boot copies itself to RAM */
#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10)
#define CONFIG_KM_CRAMFS_ADDR 0x2000000
#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */
#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */
/*
* Local Bus Definitions
*/
@ -217,8 +206,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
#define CONFIG_KM_CONSOLE_TTY "ttyS0"
/* I2C */
#define CONFIG_SYS_I2C
@ -243,8 +230,6 @@ int get_sda(void);
int get_scl(void);
#endif
#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/
/*
* eSPI - Enhanced SPI
*/

22
include/configs/km_kirkwood.h
View File

@ -24,13 +24,10 @@
#if defined(CONFIG_KM_KIRKWOOD)
#define CONFIG_HOSTNAME "km_kirkwood"
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_KIRKWOOD_PCI */
#elif defined(CONFIG_KM_KIRKWOOD_PCI)
#define CONFIG_HOSTNAME "km_kirkwood_pci"
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_FPGA_CONFIG 1
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
@ -40,11 +37,9 @@
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
/* KM_NUSA / KM_SUGP1 */
#elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
# if defined(CONFIG_KM_NUSA)
#define CONFIG_HOSTNAME "kmnusa"
@ -55,48 +50,31 @@
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1
#define CONFIG_KM_FPGA_CONFIG 1
#define CONFIG_KM_PIGGY4_88E6352 1
#define CONFIG_MV88E6352_SWITCH 1
#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
#define CONFIG_HOSTNAME "mgcoge3un"
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
#define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6061 1
/* KMCOGE5UN */
#elif defined(CONFIG_KM_COGE5UN)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1
#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
#define CONFIG_HOSTNAME "kmcoge5un"
#define CONFIG_KM_DISABLE_PCIE
#define CONFIG_KM_PIGGY4_88E6352 1
/* KM_PORTL2 */
#elif defined(CONFIG_KM_PORTL2)
#define CONFIG_HOSTNAME "portl2"
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_KM_PIGGY4_88E6061 1
/* KM_SUV31 */
#elif defined(CONFIG_KM_SUV31)
#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
#define CONFIG_HOSTNAME "kmsuv31"
#undef CONFIG_SYS_KWD_CONFIG
#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
#define CONFIG_KM_ENV_IS_IN_SPI_NOR 1
#define CONFIG_KM_FPGA_CONFIG 1
#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048"
#define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
#else

5
include/configs/kmvect1.h
View File

@ -34,11 +34,6 @@
#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \
0x0000c000 | \
MxMR_WLFx_2X)
/*
* QE UEC ethernet configuration
*/
#define CONFIG_MV88E6352_SWITCH 1
#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* ethernet port connected to simple switch 88e6122 (UEC0) */
#define CONFIG_UEC_ETH1

18
scripts/config_whitelist.txt
View File

@ -954,9 +954,6 @@ CONFIG_KMVECT1
CONFIG_KM_BOARD_EXTRA_ENV
CONFIG_KM_BOARD_NAME
CONFIG_KM_COGE5UN
CONFIG_KM_COMMON_ETH_INIT
CONFIG_KM_CONSOLE_TTY
CONFIG_KM_CRAMFS_ADDR
CONFIG_KM_DEF_ARCH
CONFIG_KM_DEF_BOOT_ARGS_CPU
CONFIG_KM_DEF_ENV
@ -971,24 +968,13 @@ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
CONFIG_KM_DISABLE_PCI
CONFIG_KM_DISABLE_PCIE
CONFIG_KM_ECC_MODE
CONFIG_KM_ENV_IS_IN_SPI_NOR
CONFIG_KM_FDT_ADDR
CONFIG_KM_FPGA_CONFIG
CONFIG_KM_IVM_BUS
CONFIG_KM_KERNEL_ADDR
CONFIG_KM_KIRKWOOD
CONFIG_KM_KIRKWOOD_128M16
CONFIG_KM_KIRKWOOD_PCI
CONFIG_KM_MGCOGE3UN
CONFIG_KM_MVEXTSW_ADDR
CONFIG_KM_NEW_ENV
CONFIG_KM_NUSA
CONFIG_KM_PHRAM
CONFIG_KM_PIGGY4_88E6061
CONFIG_KM_PIGGY4_88E6352
CONFIG_KM_PNVRAM
CONFIG_KM_PORTL2
CONFIG_KM_RESERVED_PRAM
CONFIG_KM_ROOTFSSIZE
CONFIG_KM_SUGP1
CONFIG_KM_SUV31
@ -1379,7 +1365,6 @@ CONFIG_PHY_M88E1111
CONFIG_PHY_MODE_NEED_CHANGE
CONFIG_PHY_RESET
CONFIG_PHY_RESET_DELAY
CONFIG_PIGGY_MAC_ADRESS_OFFSET
CONFIG_PIXIS_BRDCFG0_SPI
CONFIG_PIXIS_BRDCFG0_USB2
CONFIG_PIXIS_BRDCFG1_AUDCLK_11
@ -3042,9 +3027,6 @@ CONFIG_SYS_ISA_IO_BASE_ADDRESS
CONFIG_SYS_ISA_IO_OFFSET
CONFIG_SYS_ISA_IO_STRIDE
CONFIG_SYS_ISA_MEM
CONFIG_SYS_IVM_EEPROM_ADR
CONFIG_SYS_IVM_EEPROM_MAX_LEN
CONFIG_SYS_IVM_EEPROM_PAGE_LEN
CONFIG_SYS_JFFS2_FIRST_BANK
CONFIG_SYS_JFFS2_FIRST_SECTOR
CONFIG_SYS_JFFS2_MEM_NAND