brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-06 11:16:15 +09:00
Code Issues Projects Releases Wiki Activity

ppc4xx: Cleanup PLU405 platform file

Browse Source 
This patch
- wraps some long lines
- removes unused/obsolete functions: misc_init_f() and initdram()

Signed-off-by: Matthias Fuchs <mf@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Matthias Fuchs 2008-09-02 11:35:35 +02:00 committed by Stefan Roese
parent d74cdb1d06
commit 40e43e3b87
1 changed files with 21 additions and 37 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
board/esd/plu405/plu405.c
View File

@ -65,11 +65,9 @@ au_image_t au_image[] = {
int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0]));
/* Prototypes */
int gunzip(void *, int, unsigned char *, unsigned long *);
int board_early_init_f (void)
{
/*
@ -89,24 +87,18 @@ int board_early_init_f (void)
mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
mtdcr(uicpr, 0xFFFFFF99); /* set int polarities */
mtdcr(uictr, 0x10000000); /* set int trigger levels */
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest prio */
mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
* EBC Configuration Register: set ready timeout to
* 512 ebc-clks -> ca. 15 us
*/
mtebc (epcr, 0xa8400000); /* ebc always driven */
return 0;
}
int misc_init_f (void)
{
return 0; /* dummy implementation */
}
int misc_init_r (void)
{
unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
@ -132,13 +124,16 @@ int misc_init_r (void)
printf("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
printf("(Timeout: INIT not low "
"after asserting PROGRAM*)\n");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
printf("(Timeout: INIT not high "
"after deasserting PROGRAM*)\n");
break;
case ERROR_FPGA_PRG_DONE:
printf("(Timeout: DONE not high after programming FPGA)\n ");
printf("(Timeout: DONE not high "
"after programming FPGA)\n");
break;
}
@ -184,15 +179,16 @@ int misc_init_r (void)
/*
* Reset external DUARTs
*/
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
udelay(10); /* wait 10us */
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
udelay(1000); /* wait 1ms */
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_DUART_RST);
udelay(10);
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_DUART_RST);
udelay(1000);
/*
* Set NAND-FLASH GPIO signals to default
*/
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
out_be32((void*)GPIO0_OR,
in_be32((void*)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_NAND_CE);
/*
@ -210,7 +206,6 @@ int misc_init_r (void)
return (0);
}
/*
* Check Board Identity:
*/
@ -231,18 +226,6 @@ int checkboard (void)
return 0;
}
phys_size_t initdram (int board_type)
{
unsigned long val;
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
#ifdef CONFIG_IDE_RESET
void ide_set_reset(int on)
{
@ -260,7 +243,6 @@ void ide_set_reset(int on)
}
#endif /* CONFIG_IDE_RESET */
void reset_phy(void)
{
#ifdef CONFIG_LXT971_NO_SLEEP
@ -272,7 +254,6 @@ void reset_phy(void)
#endif
}
#if defined(CFG_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
* <state> -1: deliver current state
@ -290,17 +271,20 @@ int eeprom_write_enable (unsigned dev_addr, int state)
switch (state) {
case 1:
/* Enable write access, clear bit GPIO0. */
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
out_be32((void*)GPIO0_OR,
in_be32((void*)GPIO0_OR) & ~CFG_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO0. */
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
out_be32((void*)GPIO0_OR,
in_be32((void*)GPIO0_OR) | CFG_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
state = (0 == (in_be32((void*)GPIO0_OR) & CFG_EEPROM_WP));
state = (0 == (in_be32((void*)GPIO0_OR) &
CFG_EEPROM_WP));
break;
}
}