ARCv2: SLC: Make sure busy bit is set properly on SLC flushing

As reported in STAR 9001165532, an SLC control reg read (for checking
busy state) right after SLC invalidate command may incorrectly return
NOT busy causing software to NOT spin-wait while operation is underway.
(and for some reason this only happens if L1 cache is also disabled - as
required by IOC programming model)

Suggested workaround is to do an additional Control Reg read, which
ensures the 2nd read gets the right status.

Same fix made in Linux kernel:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c70c473396cbdec1168a6eff60e13029c0916854

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
This commit is contained in:
Alexey Brodkin 2017-04-05 17:50:09 +03:00
parent 9963890b8b
commit 40a808f173

View File

@ -59,10 +59,16 @@ static unsigned int __before_slc_op(const int op)
static void __after_slc_op(const int op, unsigned int reg)
{
if (op & OP_FLUSH) /* flush / flush-n-inv both wait */
if (op & OP_FLUSH) { /* flush / flush-n-inv both wait */
/*
* Make sure "busy" bit reports correct status,
* see STAR 9001165532
*/
read_aux_reg(ARC_AUX_SLC_CTRL);
while (read_aux_reg(ARC_AUX_SLC_CTRL) &
DC_CTRL_FLUSH_STATUS)
;
}
/* Switch back to default Invalidate mode */
if (op == OP_INV)