arm: dts: k3-am65: Sync CPSW DT node from kernel

Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
This commit is contained in:
Vignesh Raghavendra 2020-07-06 13:36:56 +05:30 committed by Lokesh Vutla
parent aeeca07a80
commit 3f09ebfbde
2 changed files with 85 additions and 53 deletions

View File

@ -6,6 +6,20 @@
*/
&cbass_mcu {
mcu_conf: scm_conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40f00000 0x20000>;
phy_gmii_sel: phy@4040 {
compatible = "ti,am654-phy-gmii-sel";
reg = <0x4040 0x4>;
#phy-cells = <1>;
};
};
mcu_uart0: serial@40a00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
@ -146,4 +160,74 @@
ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
};
};
mcu_cpsw: ethernet@46000000 {
compatible = "ti,am654-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x46000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
dma-coherent;
clocks = <&k3_clks 5 10>;
clock-names = "fck";
power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
dmas = <&mcu_udmap 0xf000>,
<&mcu_udmap 0xf001>,
<&mcu_udmap 0xf002>,
<&mcu_udmap 0xf003>,
<&mcu_udmap 0xf004>,
<&mcu_udmap 0xf005>,
<&mcu_udmap 0xf006>,
<&mcu_udmap 0xf007>,
<&mcu_udmap 0x7000>;
dma-names = "tx0", "tx1", "tx2", "tx3",
"tx4", "tx5", "tx6", "tx7",
"rx";
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
label = "port1";
ti,syscon-efuse = <&mcu_conf 0x200>;
phys = <&phy_gmii_sel 1>;
};
};
davinci_mdio: mdio@f00 {
compatible = "ti,cpsw-mdio","ti,davinci_mdio";
reg = <0x0 0xf00 0x0 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&k3_clks 5 10>;
clock-names = "fck";
bus_freq = <1000000>;
};
cpts@3d000 {
compatible = "ti,am65-cpts";
reg = <0x0 0x3d000 0x0 0x400>;
clocks = <&mcu_cpsw_cpts_mux>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
mcu_cpsw_cpts_mux: refclk-mux {
#clock-cells = <0>;
clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
<&k3_clks 118 6>, <&k3_clks 118 3>,
<&k3_clks 118 8>, <&k3_clks 118 14>,
<&k3_clks 120 3>, <&k3_clks 121 3>;
assigned-clocks = <&mcu_cpsw_cpts_mux>;
assigned-clock-parents = <&k3_clks 118 5>;
};
};
};
};

View File

@ -57,59 +57,6 @@
u-boot,dm-spl;
};
};
mcu_conf: scm_conf@40f00000 {
compatible = "syscon";
reg = <0x0 0x40f00000 0x0 0x20000>;
};
mcu_cpsw: cpsw_nuss@046000000 {
compatible = "ti,am654-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x46000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges;
dma-coherent;
clocks = <&k3_clks 5 10>;
clock-names = "fck";
power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
dmas = <&mcu_udmap 0xf000>,
<&mcu_udmap 0xf001>,
<&mcu_udmap 0xf002>,
<&mcu_udmap 0xf003>,
<&mcu_udmap 0xf004>,
<&mcu_udmap 0xf005>,
<&mcu_udmap 0xf006>,
<&mcu_udmap 0xf007>,
<&mcu_udmap 0x7000>;
dma-names = "tx0", "tx1", "tx2", "tx3",
"tx4", "tx5", "tx6", "tx7",
"rx";
ports {
#address-cells = <1>;
#size-cells = <0>;
host: host@0 {
reg = <0>;
ti,label = "host";
};
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
ti,label = "port1";
ti,syscon-efuse = <&mcu_conf 0x200>;
};
};
davinci_mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
};
};
};
&cbass_wakeup {
@ -271,6 +218,7 @@
reg = <0x0 0x46000000 0x0 0x200000>,
<0x0 0x40f00200 0x0 0x2>;
reg-names = "cpsw_nuss", "mac_efuse";
/delete-property/ ranges;
cpsw-phy-sel@40f04040 {
compatible = "ti,am654-cpsw-phy-sel";