mmc: add HS400 support

Add HS400 support.
Selecting HS400 needs first select HS200 according to spec, so use
a dedicated function for HS400.
Add HS400 related macros.
Remove the restriction of only using the low 6 bits of
EXT_CSD_CARD_TYPE, using all the 8 bits.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Faiz Abbas <faiz_abbas@ti.com>
Cc: Marek Vasut <marex@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Peng Fan 2018-08-10 14:07:54 +08:00 committed by Tom Rini
parent 51330c72f0
commit 3dd2626f48
3 changed files with 137 additions and 30 deletions

View File

@ -111,6 +111,19 @@ config SPL_MMC_UHS_SUPPORT
cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
frequency can go up to 208MHz (SDR104)
config MMC_HS400_SUPPORT
bool "enable HS400 support"
select MMC_HS200_SUPPORT
help
The HS400 mode is support by some eMMC. The bus frequency is up to
200MHz. This mode requires tuning the IO.
config SPL_MMC_HS400_SUPPORT
bool "enable HS400 support in SPL"
help
The HS400 mode is support by some eMMC. The bus frequency is up to
200MHz. This mode requires tuning the IO.
config MMC_HS200_SUPPORT
bool "enable HS200 support"
help

View File

@ -147,6 +147,7 @@ const char *mmc_mode_name(enum bus_mode mode)
[MMC_HS_52] = "MMC High Speed (52MHz)",
[MMC_DDR_52] = "MMC DDR52 (52MHz)",
[MMC_HS_200] = "HS200 (200MHz)",
[MMC_HS_400] = "HS400 (200MHz)",
};
if (mode >= MMC_MODES_END)
@ -171,6 +172,7 @@ static uint mmc_mode2freq(struct mmc *mmc, enum bus_mode mode)
[UHS_DDR50] = 50000000,
[UHS_SDR104] = 208000000,
[MMC_HS_200] = 200000000,
[MMC_HS_400] = 200000000,
};
if (mode == MMC_LEGACY)
@ -769,6 +771,11 @@ static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode)
case MMC_HS_200:
speed_bits = EXT_CSD_TIMING_HS200;
break;
#endif
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
case MMC_HS_400:
speed_bits = EXT_CSD_TIMING_HS400;
break;
#endif
case MMC_LEGACY:
speed_bits = EXT_CSD_TIMING_LEGACY;
@ -816,7 +823,7 @@ static int mmc_get_capabilities(struct mmc *mmc)
mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0x3f;
cardtype = ext_csd[EXT_CSD_CARD_TYPE];
mmc->cardtype = cardtype;
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
@ -824,6 +831,12 @@ static int mmc_get_capabilities(struct mmc *mmc)
EXT_CSD_CARD_TYPE_HS200_1_8V)) {
mmc->card_caps |= MMC_MODE_HS200;
}
#endif
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
if (cardtype & (EXT_CSD_CARD_TYPE_HS400_1_2V |
EXT_CSD_CARD_TYPE_HS400_1_8V)) {
mmc->card_caps |= MMC_MODE_HS400;
}
#endif
if (cardtype & EXT_CSD_CARD_TYPE_52) {
if (cardtype & EXT_CSD_CARD_TYPE_DDR_52)
@ -1734,10 +1747,13 @@ static int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
u32 card_mask = 0;
switch (mode) {
case MMC_HS_400:
case MMC_HS_200:
if (mmc->cardtype & EXT_CSD_CARD_TYPE_HS200_1_8V)
if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_8V |
EXT_CSD_CARD_TYPE_HS400_1_8V))
card_mask |= MMC_SIGNAL_VOLTAGE_180;
if (mmc->cardtype & EXT_CSD_CARD_TYPE_HS200_1_2V)
if (mmc->cardtype & (EXT_CSD_CARD_TYPE_HS200_1_2V |
EXT_CSD_CARD_TYPE_HS400_1_2V))
card_mask |= MMC_SIGNAL_VOLTAGE_120;
break;
case MMC_DDR_52:
@ -1773,6 +1789,13 @@ static inline int mmc_set_lowest_voltage(struct mmc *mmc, enum bus_mode mode,
#endif
static const struct mode_width_tuning mmc_modes_by_pref[] = {
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
{
.mode = MMC_HS_400,
.widths = MMC_MODE_8BIT,
.tuning = MMC_CMD_SEND_TUNING_BLOCK_HS200
},
#endif
#if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT)
{
.mode = MMC_HS_200,
@ -1816,6 +1839,54 @@ static const struct ext_csd_bus_width {
{MMC_MODE_1BIT, false, EXT_CSD_BUS_WIDTH_1},
};
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
static int mmc_select_hs400(struct mmc *mmc)
{
int err;
/* Set timing to HS200 for tuning */
err = mmc_set_card_speed(mmc, MMC_HS_200);
if (err)
return err;
/* configure the bus mode (host) */
mmc_select_mode(mmc, MMC_HS_200);
mmc_set_clock(mmc, mmc->tran_speed, false);
/* execute tuning if needed */
err = mmc_execute_tuning(mmc, MMC_CMD_SEND_TUNING_BLOCK_HS200);
if (err) {
debug("tuning failed\n");
return err;
}
/* Set back to HS */
mmc_set_card_speed(mmc, MMC_HS);
mmc_set_clock(mmc, mmc_mode2freq(mmc, MMC_HS), false);
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BUS_WIDTH,
EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_FLAG);
if (err)
return err;
err = mmc_set_card_speed(mmc, MMC_HS_400);
if (err)
return err;
mmc_select_mode(mmc, MMC_HS_400);
err = mmc_set_clock(mmc, mmc->tran_speed, false);
if (err)
return err;
return 0;
}
#else
static int mmc_select_hs400(struct mmc *mmc)
{
return -ENOTSUPP;
}
#endif
#define for_each_supported_width(caps, ddr, ecbv) \
for (ecbv = ext_csd_bus_width;\
ecbv < ext_csd_bus_width + ARRAY_SIZE(ext_csd_bus_width);\
@ -1869,37 +1940,49 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps)
goto error;
mmc_set_bus_width(mmc, bus_width(ecbw->cap));
/* configure the bus speed (card) */
err = mmc_set_card_speed(mmc, mwt->mode);
if (err)
goto error;
/*
* configure the bus width AND the ddr mode (card)
* The host side will be taken care of in the next step
*/
if (ecbw->ext_csd_bits & EXT_CSD_DDR_FLAG) {
err = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ecbw->ext_csd_bits);
if (err)
goto error;
}
/* configure the bus mode (host) */
mmc_select_mode(mmc, mwt->mode);
mmc_set_clock(mmc, mmc->tran_speed, MMC_CLK_ENABLE);
#ifdef MMC_SUPPORTS_TUNING
/* execute tuning if needed */
if (mwt->tuning) {
err = mmc_execute_tuning(mmc, mwt->tuning);
if (mwt->mode == MMC_HS_400) {
err = mmc_select_hs400(mmc);
if (err) {
pr_debug("tuning failed\n");
printf("Select HS400 failed %d\n", err);
goto error;
}
}
} else {
/* configure the bus speed (card) */
err = mmc_set_card_speed(mmc, mwt->mode);
if (err)
goto error;
/*
* configure the bus width AND the ddr mode
* (card). The host side will be taken care
* of in the next step
*/
if (ecbw->ext_csd_bits & EXT_CSD_DDR_FLAG) {
err = mmc_switch(mmc,
EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ecbw->ext_csd_bits);
if (err)
goto error;
}
/* configure the bus mode (host) */
mmc_select_mode(mmc, mwt->mode);
mmc_set_clock(mmc, mmc->tran_speed,
MMC_CLK_ENABLE);
#ifdef MMC_SUPPORTS_TUNING
/* execute tuning if needed */
if (mwt->tuning) {
err = mmc_execute_tuning(mmc,
mwt->tuning);
if (err) {
pr_debug("tuning failed\n");
goto error;
}
}
#endif
}
/* do a transfer to check the configuration */
err = mmc_read_and_compare_ext_csd(mmc);

View File

@ -64,6 +64,7 @@
#define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52)
#define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52)
#define MMC_MODE_HS200 MMC_CAP(MMC_HS_200)
#define MMC_MODE_HS400 MMC_CAP(MMC_HS_400)
#define MMC_MODE_8BIT BIT(30)
#define MMC_MODE_4BIT BIT(29)
@ -248,6 +249,10 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
/* SDR mode @1.2V I/O */
#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \
EXT_CSD_CARD_TYPE_HS200_1_2V)
#define EXT_CSD_CARD_TYPE_HS400_1_8V BIT(6)
#define EXT_CSD_CARD_TYPE_HS400_1_2V BIT(7)
#define EXT_CSD_CARD_TYPE_HS400 (EXT_CSD_CARD_TYPE_HS400_1_8V | \
EXT_CSD_CARD_TYPE_HS400_1_2V)
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
@ -259,6 +264,7 @@ static inline bool mmc_is_tuning_cmd(uint cmdidx)
#define EXT_CSD_TIMING_LEGACY 0 /* no high speed */
#define EXT_CSD_TIMING_HS 1 /* HS */
#define EXT_CSD_TIMING_HS200 2 /* HS200 */
#define EXT_CSD_TIMING_HS400 3 /* HS400 */
#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
@ -519,6 +525,7 @@ enum bus_mode {
UHS_DDR50,
UHS_SDR104,
MMC_HS_200,
MMC_HS_400,
MMC_MODES_END
};
@ -532,6 +539,10 @@ static inline bool mmc_is_mode_ddr(enum bus_mode mode)
#if CONFIG_IS_ENABLED(MMC_UHS_SUPPORT)
else if (mode == UHS_DDR50)
return true;
#endif
#if CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
else if (mode == MMC_HS_400)
return true;
#endif
else
return false;