mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 16:38:53 +09:00
net: Remove old Xilinx Emac driver
Signed-off-by: Michal Simek <monstr@monstr.eu>
This commit is contained in:
parent
2fddd44464
commit
3ceba1d45d
@ -72,7 +72,6 @@ COBJS-$(CONFIG_TSEC_ENET) += tsec.o
|
|||||||
COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
|
COBJS-$(CONFIG_TSI108_ETH) += tsi108_eth.o
|
||||||
COBJS-$(CONFIG_ULI526X) += uli526x.o
|
COBJS-$(CONFIG_ULI526X) += uli526x.o
|
||||||
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
|
COBJS-$(CONFIG_VSC7385_ENET) += vsc7385.o
|
||||||
COBJS-$(CONFIG_XILINX_EMAC) += xilinx_emac.o
|
|
||||||
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
|
COBJS-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
|
||||||
|
|
||||||
COBJS := $(COBJS-y)
|
COBJS := $(COBJS-y)
|
||||||
|
@ -1,464 +0,0 @@
|
|||||||
/******************************************************************************
|
|
||||||
*
|
|
||||||
* XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
|
|
||||||
* AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
|
|
||||||
* SOLUTIONS FOR XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE,
|
|
||||||
* OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
|
|
||||||
* APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
|
|
||||||
* THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
|
|
||||||
* AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
|
|
||||||
* FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY
|
|
||||||
* WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
|
|
||||||
* IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
|
|
||||||
* REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
|
|
||||||
* INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
||||||
* FOR A PARTICULAR PURPOSE.
|
|
||||||
*
|
|
||||||
* (C) Copyright 2007-2008 Michal Simek
|
|
||||||
* Michal SIMEK <monstr@monstr.eu>
|
|
||||||
*
|
|
||||||
* (c) Copyright 2003 Xilinx Inc.
|
|
||||||
* All rights reserved.
|
|
||||||
*
|
|
||||||
******************************************************************************/
|
|
||||||
|
|
||||||
#include <config.h>
|
|
||||||
#include <common.h>
|
|
||||||
#include <net.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
|
|
||||||
#include <asm/asm.h>
|
|
||||||
|
|
||||||
#undef DEBUG
|
|
||||||
|
|
||||||
typedef struct {
|
|
||||||
u32 regbaseaddress; /* Base address of registers */
|
|
||||||
u32 databaseaddress; /* Base address of data for FIFOs */
|
|
||||||
} xpacketfifov100b;
|
|
||||||
|
|
||||||
typedef struct {
|
|
||||||
u32 baseaddress; /* Base address (of IPIF) */
|
|
||||||
u32 isstarted; /* Device is currently started 0-no, 1-yes */
|
|
||||||
xpacketfifov100b recvfifo; /* FIFO used to receive frames */
|
|
||||||
xpacketfifov100b sendfifo; /* FIFO used to send frames */
|
|
||||||
} xemac;
|
|
||||||
|
|
||||||
#define XIIF_V123B_IISR_OFFSET 32UL /* IP interrupt status register */
|
|
||||||
#define XIIF_V123B_RESET_MASK 0xAUL
|
|
||||||
#define XIIF_V123B_RESETR_OFFSET 64UL /* reset register */
|
|
||||||
|
|
||||||
/* This constant is used with the Reset Register */
|
|
||||||
#define XPF_RESET_FIFO_MASK 0x0000000A
|
|
||||||
#define XPF_COUNT_STATUS_REG_OFFSET 4UL
|
|
||||||
|
|
||||||
/* These constants are used with the Occupancy/Vacancy Count Register. This
|
|
||||||
* register also contains FIFO status */
|
|
||||||
#define XPF_COUNT_MASK 0x0000FFFF
|
|
||||||
#define XPF_DEADLOCK_MASK 0x20000000
|
|
||||||
|
|
||||||
/* Offset of the MAC registers from the IPIF base address */
|
|
||||||
#define XEM_REG_OFFSET 0x1100UL
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Register offsets for the Ethernet MAC. Each register is 32 bits.
|
|
||||||
*/
|
|
||||||
#define XEM_ECR_OFFSET (XEM_REG_OFFSET + 0x4) /* MAC Control */
|
|
||||||
#define XEM_SAH_OFFSET (XEM_REG_OFFSET + 0xC) /* Station addr, high */
|
|
||||||
#define XEM_SAL_OFFSET (XEM_REG_OFFSET + 0x10) /* Station addr, low */
|
|
||||||
#define XEM_RPLR_OFFSET (XEM_REG_OFFSET + 0x1C) /* Rx packet length */
|
|
||||||
#define XEM_TPLR_OFFSET (XEM_REG_OFFSET + 0x20) /* Tx packet length */
|
|
||||||
#define XEM_TSR_OFFSET (XEM_REG_OFFSET + 0x24) /* Tx status */
|
|
||||||
|
|
||||||
#define XEM_PFIFO_OFFSET 0x2000UL
|
|
||||||
/* Tx registers */
|
|
||||||
#define XEM_PFIFO_TXREG_OFFSET (XEM_PFIFO_OFFSET + 0x0)
|
|
||||||
/* Rx registers */
|
|
||||||
#define XEM_PFIFO_RXREG_OFFSET (XEM_PFIFO_OFFSET + 0x10)
|
|
||||||
/* Tx keyhole */
|
|
||||||
#define XEM_PFIFO_TXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x100)
|
|
||||||
/* Rx keyhole */
|
|
||||||
#define XEM_PFIFO_RXDATA_OFFSET (XEM_PFIFO_OFFSET + 0x200)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* EMAC Interrupt Registers (Status and Enable) masks. These registers are
|
|
||||||
* part of the IPIF IP Interrupt registers
|
|
||||||
*/
|
|
||||||
/* A mask for all transmit interrupts, used in polled mode */
|
|
||||||
#define XEM_EIR_XMIT_ALL_MASK (XEM_EIR_XMIT_DONE_MASK |\
|
|
||||||
XEM_EIR_XMIT_ERROR_MASK | \
|
|
||||||
XEM_EIR_XMIT_SFIFO_EMPTY_MASK |\
|
|
||||||
XEM_EIR_XMIT_LFIFO_FULL_MASK)
|
|
||||||
|
|
||||||
/* Xmit complete */
|
|
||||||
#define XEM_EIR_XMIT_DONE_MASK 0x00000001UL
|
|
||||||
/* Recv complete */
|
|
||||||
#define XEM_EIR_RECV_DONE_MASK 0x00000002UL
|
|
||||||
/* Xmit error */
|
|
||||||
#define XEM_EIR_XMIT_ERROR_MASK 0x00000004UL
|
|
||||||
/* Recv error */
|
|
||||||
#define XEM_EIR_RECV_ERROR_MASK 0x00000008UL
|
|
||||||
/* Xmit status fifo empty */
|
|
||||||
#define XEM_EIR_XMIT_SFIFO_EMPTY_MASK 0x00000010UL
|
|
||||||
/* Recv length fifo empty */
|
|
||||||
#define XEM_EIR_RECV_LFIFO_EMPTY_MASK 0x00000020UL
|
|
||||||
/* Xmit length fifo full */
|
|
||||||
#define XEM_EIR_XMIT_LFIFO_FULL_MASK 0x00000040UL
|
|
||||||
/* Recv length fifo overrun */
|
|
||||||
#define XEM_EIR_RECV_LFIFO_OVER_MASK 0x00000080UL
|
|
||||||
/* Recv length fifo underrun */
|
|
||||||
#define XEM_EIR_RECV_LFIFO_UNDER_MASK 0x00000100UL
|
|
||||||
/* Xmit status fifo overrun */
|
|
||||||
#define XEM_EIR_XMIT_SFIFO_OVER_MASK 0x00000200UL
|
|
||||||
/* Transmit status fifo underrun */
|
|
||||||
#define XEM_EIR_XMIT_SFIFO_UNDER_MASK 0x00000400UL
|
|
||||||
/* Transmit length fifo overrun */
|
|
||||||
#define XEM_EIR_XMIT_LFIFO_OVER_MASK 0x00000800UL
|
|
||||||
/* Transmit length fifo underrun */
|
|
||||||
#define XEM_EIR_XMIT_LFIFO_UNDER_MASK 0x00001000UL
|
|
||||||
/* Transmit pause pkt received */
|
|
||||||
#define XEM_EIR_XMIT_PAUSE_MASK 0x00002000UL
|
|
||||||
|
|
||||||
/*
|
|
||||||
* EMAC Control Register (ECR)
|
|
||||||
*/
|
|
||||||
/* Full duplex mode */
|
|
||||||
#define XEM_ECR_FULL_DUPLEX_MASK 0x80000000UL
|
|
||||||
/* Reset transmitter */
|
|
||||||
#define XEM_ECR_XMIT_RESET_MASK 0x40000000UL
|
|
||||||
/* Enable transmitter */
|
|
||||||
#define XEM_ECR_XMIT_ENABLE_MASK 0x20000000UL
|
|
||||||
/* Reset receiver */
|
|
||||||
#define XEM_ECR_RECV_RESET_MASK 0x10000000UL
|
|
||||||
/* Enable receiver */
|
|
||||||
#define XEM_ECR_RECV_ENABLE_MASK 0x08000000UL
|
|
||||||
/* Enable PHY */
|
|
||||||
#define XEM_ECR_PHY_ENABLE_MASK 0x04000000UL
|
|
||||||
/* Enable xmit pad insert */
|
|
||||||
#define XEM_ECR_XMIT_PAD_ENABLE_MASK 0x02000000UL
|
|
||||||
/* Enable xmit FCS insert */
|
|
||||||
#define XEM_ECR_XMIT_FCS_ENABLE_MASK 0x01000000UL
|
|
||||||
/* Enable unicast addr */
|
|
||||||
#define XEM_ECR_UNICAST_ENABLE_MASK 0x00020000UL
|
|
||||||
/* Enable broadcast addr */
|
|
||||||
#define XEM_ECR_BROAD_ENABLE_MASK 0x00008000UL
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Transmit Status Register (TSR)
|
|
||||||
*/
|
|
||||||
/* Transmit excess deferral */
|
|
||||||
#define XEM_TSR_EXCESS_DEFERRAL_MASK 0x80000000UL
|
|
||||||
/* Transmit late collision */
|
|
||||||
#define XEM_TSR_LATE_COLLISION_MASK 0x01000000UL
|
|
||||||
|
|
||||||
#define ENET_MAX_MTU PKTSIZE
|
|
||||||
#define ENET_ADDR_LENGTH 6
|
|
||||||
|
|
||||||
static unsigned int etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
|
|
||||||
|
|
||||||
static u8 emacaddr[ENET_ADDR_LENGTH] = { 0x00, 0x0a, 0x35, 0x00, 0x22, 0x01 };
|
|
||||||
|
|
||||||
static xemac emac;
|
|
||||||
|
|
||||||
void eth_halt(void)
|
|
||||||
{
|
|
||||||
debug ("eth_halt\n");
|
|
||||||
}
|
|
||||||
|
|
||||||
int eth_init(bd_t * bis)
|
|
||||||
{
|
|
||||||
uchar enetaddr[6];
|
|
||||||
u32 helpreg;
|
|
||||||
debug ("EMAC Initialization Started\n\r");
|
|
||||||
|
|
||||||
if (emac.isstarted) {
|
|
||||||
puts("Emac is started\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
memset (&emac, 0, sizeof (xemac));
|
|
||||||
|
|
||||||
emac.baseaddress = XILINX_EMAC_BASEADDR;
|
|
||||||
|
|
||||||
/* Setting up FIFOs */
|
|
||||||
emac.recvfifo.regbaseaddress = emac.baseaddress +
|
|
||||||
XEM_PFIFO_RXREG_OFFSET;
|
|
||||||
emac.recvfifo.databaseaddress = emac.baseaddress +
|
|
||||||
XEM_PFIFO_RXDATA_OFFSET;
|
|
||||||
out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
|
|
||||||
|
|
||||||
emac.sendfifo.regbaseaddress = emac.baseaddress +
|
|
||||||
XEM_PFIFO_TXREG_OFFSET;
|
|
||||||
emac.sendfifo.databaseaddress = emac.baseaddress +
|
|
||||||
XEM_PFIFO_TXDATA_OFFSET;
|
|
||||||
out_be32 (emac.sendfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
|
|
||||||
|
|
||||||
/* Reset the entire IPIF */
|
|
||||||
out_be32 (emac.baseaddress + XIIF_V123B_RESETR_OFFSET,
|
|
||||||
XIIF_V123B_RESET_MASK);
|
|
||||||
|
|
||||||
/* Stopping EMAC for setting up MAC */
|
|
||||||
helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
|
|
||||||
helpreg &= ~(XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
|
|
||||||
out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
|
|
||||||
|
|
||||||
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
|
|
||||||
memcpy(enetaddr, emacaddr, ENET_ADDR_LENGTH);
|
|
||||||
eth_setenv_enetaddr("ethaddr", enetaddr);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Set the device station address high and low registers */
|
|
||||||
helpreg = (enetaddr[0] << 8) | enetaddr[1];
|
|
||||||
out_be32 (emac.baseaddress + XEM_SAH_OFFSET, helpreg);
|
|
||||||
helpreg = (enetaddr[2] << 24) | (enetaddr[3] << 16) |
|
|
||||||
(enetaddr[4] << 8) | enetaddr[5];
|
|
||||||
out_be32 (emac.baseaddress + XEM_SAL_OFFSET, helpreg);
|
|
||||||
|
|
||||||
helpreg = XEM_ECR_UNICAST_ENABLE_MASK | XEM_ECR_BROAD_ENABLE_MASK |
|
|
||||||
XEM_ECR_FULL_DUPLEX_MASK | XEM_ECR_XMIT_FCS_ENABLE_MASK |
|
|
||||||
XEM_ECR_XMIT_PAD_ENABLE_MASK | XEM_ECR_PHY_ENABLE_MASK;
|
|
||||||
out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
|
|
||||||
|
|
||||||
emac.isstarted = 1;
|
|
||||||
|
|
||||||
/* Enable the transmitter, and receiver */
|
|
||||||
helpreg = in_be32 (emac.baseaddress + XEM_ECR_OFFSET);
|
|
||||||
helpreg &= ~(XEM_ECR_XMIT_RESET_MASK | XEM_ECR_RECV_RESET_MASK);
|
|
||||||
helpreg |= (XEM_ECR_XMIT_ENABLE_MASK | XEM_ECR_RECV_ENABLE_MASK);
|
|
||||||
out_be32 (emac.baseaddress + XEM_ECR_OFFSET, helpreg);
|
|
||||||
|
|
||||||
printf("EMAC Initialization complete\n\r");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
int eth_send(volatile void *ptr, int len)
|
|
||||||
{
|
|
||||||
u32 intrstatus;
|
|
||||||
u32 xmitstatus;
|
|
||||||
u32 fifocount;
|
|
||||||
u32 wordcount;
|
|
||||||
u32 extrabytecount;
|
|
||||||
u32 *wordbuffer = (u32 *) ptr;
|
|
||||||
|
|
||||||
if (len > ENET_MAX_MTU)
|
|
||||||
len = ENET_MAX_MTU;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Check for overruns and underruns for the transmit status and length
|
|
||||||
* FIFOs and make sure the send packet FIFO is not deadlocked.
|
|
||||||
* Any of these conditions is bad enough that we do not want to
|
|
||||||
* continue. The upper layer software should reset the device to resolve
|
|
||||||
* the error.
|
|
||||||
*/
|
|
||||||
intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
|
|
||||||
if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
|
|
||||||
XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
|
|
||||||
debug ("Transmitting overrun error\n");
|
|
||||||
return 0;
|
|
||||||
} else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
|
|
||||||
XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
|
|
||||||
debug ("Transmitting underrun error\n");
|
|
||||||
return 0;
|
|
||||||
} else if (in_be32 (emac.sendfifo.regbaseaddress +
|
|
||||||
XPF_COUNT_STATUS_REG_OFFSET) & XPF_DEADLOCK_MASK) {
|
|
||||||
debug ("Transmitting fifo error\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Before writing to the data FIFO, make sure the length FIFO is not
|
|
||||||
* full. The data FIFO might not be full yet even though the length FIFO
|
|
||||||
* is. This avoids an overrun condition on the length FIFO and keeps the
|
|
||||||
* FIFOs in sync.
|
|
||||||
*
|
|
||||||
* Clear the latched LFIFO_FULL bit so next time around the most
|
|
||||||
* current status is represented
|
|
||||||
*/
|
|
||||||
if (intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK) {
|
|
||||||
out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
|
|
||||||
intrstatus & XEM_EIR_XMIT_LFIFO_FULL_MASK);
|
|
||||||
debug ("Fifo is full\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* get the count of how many words may be inserted into the FIFO */
|
|
||||||
fifocount = in_be32 (emac.sendfifo.regbaseaddress +
|
|
||||||
XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
|
|
||||||
wordcount = len >> 2;
|
|
||||||
extrabytecount = len & 0x3;
|
|
||||||
|
|
||||||
if (fifocount < wordcount) {
|
|
||||||
debug ("Sending packet is larger then size of FIFO\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (fifocount = 0; fifocount < wordcount; fifocount++) {
|
|
||||||
out_be32 (emac.sendfifo.databaseaddress, wordbuffer[fifocount]);
|
|
||||||
}
|
|
||||||
if (extrabytecount > 0) {
|
|
||||||
u32 lastword = 0;
|
|
||||||
u8 *extrabytesbuffer = (u8 *) (wordbuffer + wordcount);
|
|
||||||
|
|
||||||
if (extrabytecount == 1) {
|
|
||||||
lastword = extrabytesbuffer[0] << 24;
|
|
||||||
} else if (extrabytecount == 2) {
|
|
||||||
lastword = extrabytesbuffer[0] << 24 |
|
|
||||||
extrabytesbuffer[1] << 16;
|
|
||||||
} else if (extrabytecount == 3) {
|
|
||||||
lastword = extrabytesbuffer[0] << 24 |
|
|
||||||
extrabytesbuffer[1] << 16 |
|
|
||||||
extrabytesbuffer[2] << 8;
|
|
||||||
}
|
|
||||||
out_be32 (emac.sendfifo.databaseaddress, lastword);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Loop on the MAC's status to wait for any pause to complete */
|
|
||||||
intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
|
|
||||||
while ((intrstatus & XEM_EIR_XMIT_PAUSE_MASK) != 0) {
|
|
||||||
intrstatus = in_be32 ((emac.baseaddress) +
|
|
||||||
XIIF_V123B_IISR_OFFSET);
|
|
||||||
/* Clear the pause status from the transmit status register */
|
|
||||||
out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
|
|
||||||
intrstatus & XEM_EIR_XMIT_PAUSE_MASK);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set the MAC's transmit packet length register to tell it to transmit
|
|
||||||
*/
|
|
||||||
out_be32 (emac.baseaddress + XEM_TPLR_OFFSET, len);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Loop on the MAC's status to wait for the transmit to complete.
|
|
||||||
* The transmit status is in the FIFO when the XMIT_DONE bit is set.
|
|
||||||
*/
|
|
||||||
do {
|
|
||||||
intrstatus = in_be32 ((emac.baseaddress) +
|
|
||||||
XIIF_V123B_IISR_OFFSET);
|
|
||||||
}
|
|
||||||
while ((intrstatus & XEM_EIR_XMIT_DONE_MASK) == 0);
|
|
||||||
|
|
||||||
xmitstatus = in_be32 (emac.baseaddress + XEM_TSR_OFFSET);
|
|
||||||
|
|
||||||
if (intrstatus & (XEM_EIR_XMIT_SFIFO_OVER_MASK |
|
|
||||||
XEM_EIR_XMIT_LFIFO_OVER_MASK)) {
|
|
||||||
debug ("Transmitting overrun error\n");
|
|
||||||
return 0;
|
|
||||||
} else if (intrstatus & (XEM_EIR_XMIT_SFIFO_UNDER_MASK |
|
|
||||||
XEM_EIR_XMIT_LFIFO_UNDER_MASK)) {
|
|
||||||
debug ("Transmitting underrun error\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Clear the interrupt status register of transmit statuses */
|
|
||||||
out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
|
|
||||||
intrstatus & XEM_EIR_XMIT_ALL_MASK);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Collision errors are stored in the transmit status register
|
|
||||||
* instead of the interrupt status register
|
|
||||||
*/
|
|
||||||
if ((xmitstatus & XEM_TSR_EXCESS_DEFERRAL_MASK) ||
|
|
||||||
(xmitstatus & XEM_TSR_LATE_COLLISION_MASK)) {
|
|
||||||
debug ("Transmitting collision error\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
int eth_rx(void)
|
|
||||||
{
|
|
||||||
u32 pktlength;
|
|
||||||
u32 intrstatus;
|
|
||||||
u32 fifocount;
|
|
||||||
u32 wordcount;
|
|
||||||
u32 extrabytecount;
|
|
||||||
u32 lastword;
|
|
||||||
u8 *extrabytesbuffer;
|
|
||||||
|
|
||||||
if (in_be32 (emac.recvfifo.regbaseaddress + XPF_COUNT_STATUS_REG_OFFSET)
|
|
||||||
& XPF_DEADLOCK_MASK) {
|
|
||||||
out_be32 (emac.recvfifo.regbaseaddress, XPF_RESET_FIFO_MASK);
|
|
||||||
debug ("Receiving FIFO deadlock\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Get the interrupt status to know what happened (whether an error
|
|
||||||
* occurred and/or whether frames have been received successfully).
|
|
||||||
* When clearing the intr status register, clear only statuses that
|
|
||||||
* pertain to receive.
|
|
||||||
*/
|
|
||||||
intrstatus = in_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET);
|
|
||||||
/*
|
|
||||||
* Before reading from the length FIFO, make sure the length FIFO is not
|
|
||||||
* empty. We could cause an underrun error if we try to read from an
|
|
||||||
* empty FIFO.
|
|
||||||
*/
|
|
||||||
if (!(intrstatus & XEM_EIR_RECV_DONE_MASK)) {
|
|
||||||
/* debug ("Receiving FIFO is empty\n"); */
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Determine, from the MAC, the length of the next packet available
|
|
||||||
* in the data FIFO (there should be a non-zero length here)
|
|
||||||
*/
|
|
||||||
pktlength = in_be32 (emac.baseaddress + XEM_RPLR_OFFSET);
|
|
||||||
if (!pktlength) {
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Write the RECV_DONE bit in the status register to clear it. This bit
|
|
||||||
* indicates the RPLR is non-empty, and we know it's set at this point.
|
|
||||||
* We clear it so that subsequent entry into this routine will reflect
|
|
||||||
* the current status. This is done because the non-empty bit is latched
|
|
||||||
* in the IPIF, which means it may indicate a non-empty condition even
|
|
||||||
* though there is something in the FIFO.
|
|
||||||
*/
|
|
||||||
out_be32 ((emac.baseaddress) + XIIF_V123B_IISR_OFFSET,
|
|
||||||
XEM_EIR_RECV_DONE_MASK);
|
|
||||||
|
|
||||||
fifocount = in_be32 (emac.recvfifo.regbaseaddress +
|
|
||||||
XPF_COUNT_STATUS_REG_OFFSET) & XPF_COUNT_MASK;
|
|
||||||
|
|
||||||
if ((fifocount * 4) < pktlength) {
|
|
||||||
debug ("Receiving FIFO is smaller than packet size.\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
wordcount = pktlength >> 2;
|
|
||||||
extrabytecount = pktlength & 0x3;
|
|
||||||
|
|
||||||
for (fifocount = 0; fifocount < wordcount; fifocount++) {
|
|
||||||
etherrxbuff[fifocount] =
|
|
||||||
in_be32 (emac.recvfifo.databaseaddress);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* if there are extra bytes to handle, read the last word from the FIFO
|
|
||||||
* and insert the extra bytes into the buffer
|
|
||||||
*/
|
|
||||||
if (extrabytecount > 0) {
|
|
||||||
extrabytesbuffer = (u8 *) (etherrxbuff + wordcount);
|
|
||||||
|
|
||||||
lastword = in_be32 (emac.recvfifo.databaseaddress);
|
|
||||||
|
|
||||||
/*
|
|
||||||
* one extra byte in the last word, put the byte into the next
|
|
||||||
* location of the buffer, bytes in a word of the FIFO are
|
|
||||||
* ordered from most significant byte to least
|
|
||||||
*/
|
|
||||||
if (extrabytecount == 1) {
|
|
||||||
extrabytesbuffer[0] = (u8) (lastword >> 24);
|
|
||||||
} else if (extrabytecount == 2) {
|
|
||||||
extrabytesbuffer[0] = (u8) (lastword >> 24);
|
|
||||||
extrabytesbuffer[1] = (u8) (lastword >> 16);
|
|
||||||
} else if (extrabytecount == 3) {
|
|
||||||
extrabytesbuffer[0] = (u8) (lastword >> 24);
|
|
||||||
extrabytesbuffer[1] = (u8) (lastword >> 16);
|
|
||||||
extrabytesbuffer[2] = (u8) (lastword >> 8);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
NetReceive((uchar *)etherrxbuff, pktlength);
|
|
||||||
return 1;
|
|
||||||
}
|
|
@ -58,10 +58,7 @@
|
|||||||
/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/
|
/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/
|
||||||
|
|
||||||
/* ethernet */
|
/* ethernet */
|
||||||
#ifdef XILINX_EMAC_BASEADDR
|
#ifdef XILINX_EMACLITE_BASEADDR
|
||||||
#define CONFIG_XILINX_EMAC 1
|
|
||||||
#define CONFIG_SYS_ENET
|
|
||||||
#elif XILINX_EMACLITE_BASEADDR
|
|
||||||
#define CONFIG_XILINX_EMACLITE 1
|
#define CONFIG_XILINX_EMACLITE 1
|
||||||
#define CONFIG_SYS_ENET
|
#define CONFIG_SYS_ENET
|
||||||
#elif XILINX_LLTEMAC_BASEADDR
|
#elif XILINX_LLTEMAC_BASEADDR
|
||||||
|
Loading…
Reference in New Issue
Block a user