From 3a1adb621b985ebaf2c72ff179190b305577e1de Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 29 Sep 2015 17:28:20 +0530 Subject: [PATCH] sf: spi_flash_validate_params => spi_flash_scan Rename spi_flash_validate_params to spi_flash_scan as this code not only deals with params setup but also configure all spi_flash attributes. And also moved all flash related code into spi_flash_scan for future functionality addition. Tested-by: Jagan Teki Tested-by: Bin Meng Reviewed-by: Bin Meng Reviewed-by: Simon Glass Signed-off-by: Jagan Teki --- drivers/mtd/spi/sf_probe.c | 147 +++++++++++++++++++------------------ 1 file changed, 76 insertions(+), 71 deletions(-) diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index a619182a75..3da72df165 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -130,13 +130,42 @@ bank_end: } #endif -static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, - struct spi_flash *flash) +#if CONFIG_IS_ENABLED(OF_CONTROL) +int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) +{ + fdt_addr_t addr; + fdt_size_t size; + int node; + + /* If there is no node, do nothing */ + node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH); + if (node < 0) + return 0; + + addr = fdtdec_get_addr_size(blob, node, "memory-map", &size); + if (addr == FDT_ADDR_T_NONE) { + debug("%s: Cannot decode address\n", __func__); + return 0; + } + + if (flash->size != size) { + debug("%s: Memory map must cover entire device\n", __func__); + return -1; + } + flash->memory_map = map_sysmem(addr, size); + + return 0; +} +#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */ + +static int spi_flash_scan(struct spi_slave *spi, u8 *idcode, + struct spi_flash *flash) { const struct spi_flash_params *params; u8 cmd; u16 jedec = idcode[1] << 8 | idcode[2]; u16 ext_jedec = idcode[3] << 8 | idcode[4]; + int ret; /* Validate params from spi_flash_params table */ params = spi_flash_params_table; @@ -158,6 +187,13 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, return -EPROTONOSUPPORT; } + /* Flash powers up read-only, so clear BP# bits */ +#if defined(CONFIG_SPI_FLASH_ATMEL) || \ + defined(CONFIG_SPI_FLASH_MACRONIX) || \ + defined(CONFIG_SPI_FLASH_SST) + spi_flash_cmd_write_status(flash, 0); +#endif + /* Assign spi data */ flash->spi = spi; flash->name = params->name; @@ -253,6 +289,17 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, /* Go for default supported write cmd */ flash->write_cmd = CMD_PAGE_PROGRAM; + /* Set the quad enable bit - only for quad commands */ + if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || + (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || + (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { + ret = spi_flash_set_qeb(flash, idcode[0]); + if (ret) { + debug("SF: Fail to set QEB for %02x\n", idcode[0]); + return -EINVAL; + } + } + /* Read dummy_byte: dummy byte is determined based on the * dummy cycles of a particular command. * Fast commands - dummy_byte = dummy_cycles/8 @@ -279,48 +326,41 @@ static int spi_flash_validate_params(struct spi_slave *spi, u8 *idcode, /* Configure the BAR - discover bank cmds and read current bank */ #ifdef CONFIG_SPI_FLASH_BAR - int ret = spi_flash_read_bank(flash, idcode[0]); + ret = spi_flash_read_bank(flash, idcode[0]); if (ret < 0) return ret; #endif - /* Flash powers up read-only, so clear BP# bits */ -#if defined(CONFIG_SPI_FLASH_ATMEL) || \ - defined(CONFIG_SPI_FLASH_MACRONIX) || \ - defined(CONFIG_SPI_FLASH_SST) - spi_flash_cmd_write_status(flash, 0); +#if CONFIG_IS_ENABLED(OF_CONTROL) + ret = spi_flash_decode_fdt(gd->fdt_blob, flash); + if (ret) { + debug("SF: FDT decode error\n"); + return -EINVAL; + } #endif - return 0; -} +#ifndef CONFIG_SPL_BUILD + printf("SF: Detected %s with page size ", flash->name); + print_size(flash->page_size, ", erase size "); + print_size(flash->erase_size, ", total "); + print_size(flash->size, ""); + if (flash->memory_map) + printf(", mapped at %p", flash->memory_map); + puts("\n"); +#endif -#if CONFIG_IS_ENABLED(OF_CONTROL) -int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash) -{ - fdt_addr_t addr; - fdt_size_t size; - int node; - - /* If there is no node, do nothing */ - node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH); - if (node < 0) - return 0; - - addr = fdtdec_get_addr_size(blob, node, "memory-map", &size); - if (addr == FDT_ADDR_T_NONE) { - debug("%s: Cannot decode address\n", __func__); - return 0; +#ifndef CONFIG_SPI_FLASH_BAR + if (((flash->dual_flash == SF_SINGLE_FLASH) && + (flash->size > SPI_FLASH_16MB_BOUN)) || + ((flash->dual_flash > SF_SINGLE_FLASH) && + (flash->size > SPI_FLASH_16MB_BOUN << 1))) { + puts("SF: Warning - Only lower 16MiB accessible,"); + puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); } +#endif - if (flash->size != size) { - debug("%s: Memory map must cover entire device\n", __func__); - return -1; - } - flash->memory_map = map_sysmem(addr, size); - - return 0; + return ret; } -#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */ /** * spi_flash_probe_slave() - Probe for a SPI flash device on a bus @@ -359,47 +399,12 @@ int spi_flash_probe_slave(struct spi_slave *spi, struct spi_flash *flash) print_buffer(0, idcode, 1, sizeof(idcode), 0); #endif - if (spi_flash_validate_params(spi, idcode, flash)) { + ret = spi_flash_scan(spi, idcode, flash); + if (ret) { ret = -EINVAL; goto err_read_id; } - /* Set the quad enable bit - only for quad commands */ - if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) || - (flash->read_cmd == CMD_READ_QUAD_IO_FAST) || - (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) { - if (spi_flash_set_qeb(flash, idcode[0])) { - debug("SF: Fail to set QEB for %02x\n", idcode[0]); - ret = -EINVAL; - goto err_read_id; - } - } - -#if CONFIG_IS_ENABLED(OF_CONTROL) - if (spi_flash_decode_fdt(gd->fdt_blob, flash)) { - debug("SF: FDT decode error\n"); - ret = -EINVAL; - goto err_read_id; - } -#endif -#ifndef CONFIG_SPL_BUILD - printf("SF: Detected %s with page size ", flash->name); - print_size(flash->page_size, ", erase size "); - print_size(flash->erase_size, ", total "); - print_size(flash->size, ""); - if (flash->memory_map) - printf(", mapped at %p", flash->memory_map); - puts("\n"); -#endif -#ifndef CONFIG_SPI_FLASH_BAR - if (((flash->dual_flash == SF_SINGLE_FLASH) && - (flash->size > SPI_FLASH_16MB_BOUN)) || - ((flash->dual_flash > SF_SINGLE_FLASH) && - (flash->size > SPI_FLASH_16MB_BOUN << 1))) { - puts("SF: Warning - Only lower 16MiB accessible,"); - puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); - } -#endif #ifdef CONFIG_SPI_FLASH_MTD ret = spi_flash_mtd_register(flash); #endif