brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

pinctrl: Add pinctrl driver for i.MX8

Browse Source 
Add pinctrl driver for i.MX8. The pads configuration is controlled
by SCU, so need to ask SCU to configure pads through scfw API.
Add pinctrl-scu to invoke sc_pad_set to configure pads.
Add a new flag IMX8_USE_SCU to differentiate i.MX8 from other platforms
which could directly configure pads from Acore side.
Add CONFIG_PINCTRL_IMX8 as the built gate.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Peng Fan 2018-10-18 14:28:28 +02:00 committed by Stefano Babic
parent 8b2a31f133
commit 38b6686f05
6 changed files with 264 additions and 99 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/pinctrl/nxp/Kconfig
View File

@ -1,6 +1,9 @@
config PINCTRL_IMX
bool
config PINCTRL_IMX_SCU
bool
config PINCTRL_IMX5
bool "IMX5 pinctrl driver"
depends on ARCH_MX5 && PINCTRL_FULL
@ -56,3 +59,18 @@ config PINCTRL_IMX7ULP
is different from the linux one, this is a simple implementation,
only parses the 'fsl,pins' property and configure related
registers.
config PINCTRL_IMX8
bool "IMX8 pinctrl driver"
depends on ARCH_IMX8 && PINCTRL_FULL
select DEVRES
select PINCTRL_IMX
select PINCTRL_IMX_SCU
help
Say Y here to enable the imx8 pinctrl driver
This provides a simple pinctrl driver for i.MX8 SoC familiy.
This feature depends on device tree configuration. This driver
is different from the linux one, this is a simple implementation,
only parses the 'fsl,pins' property and configures related
registers.

2
drivers/pinctrl/nxp/Makefile
View File

@ -3,3 +3,5 @@ obj-$(CONFIG_PINCTRL_IMX5) += pinctrl-imx5.o
obj-$(CONFIG_PINCTRL_IMX6) += pinctrl-imx6.o
obj-$(CONFIG_PINCTRL_IMX7) += pinctrl-imx7.o
obj-$(CONFIG_PINCTRL_IMX7ULP) += pinctrl-imx7ulp.o
obj-$(CONFIG_PINCTRL_IMX_SCU) += pinctrl-scu.o
obj-$(CONFIG_PINCTRL_IMX8) += pinctrl-imx8.o

221
drivers/pinctrl/nxp/pinctrl-imx.c
View File

@ -28,7 +28,9 @@ static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
dev_dbg(dev, "%s: %s\n", __func__, config->name);
if (info->flags & SHARE_MUX_CONF_REG)
if (info->flags & IMX8_USE_SCU)
pin_size = SHARE_IMX8_PIN_SIZE;
else if (info->flags & SHARE_MUX_CONF_REG)
pin_size = SHARE_FSL_PIN_SIZE;
else
pin_size = FSL_PIN_SIZE;
@ -58,112 +60,127 @@ static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
npins = size / pin_size;
/*
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
*/
for (i = 0; i < npins; i++) {
mux_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
mux_reg = -1;
if (info->flags & SHARE_MUX_CONF_REG) {
conf_reg = mux_reg;
} else {
conf_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) && !conf_reg)
conf_reg = -1;
}
if ((mux_reg == -1) || (conf_reg == -1)) {
dev_err(dev, "Error mux_reg or conf_reg\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
input_reg = pin_data[j++];
mux_mode = pin_data[j++];
input_val = pin_data[j++];
config_val = pin_data[j++];
dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, input_reg 0x%x, "
"mux_mode 0x%x, input_val 0x%x, config_val 0x%x\n",
mux_reg, conf_reg, input_reg, mux_mode, input_val,
config_val);
if (config_val & IMX_PAD_SION)
mux_mode |= IOMUXC_CONFIG_SION;
config_val &= ~IMX_PAD_SION;
/* Set Mux */
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + mux_reg, info->mux_mask,
mux_mode << mux_shift);
} else {
writel(mux_mode, info->base + mux_reg);
}
dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", mux_reg,
mux_mode);
if (info->flags & IMX8_USE_SCU) {
imx_pinctrl_scu_conf_pins(info, pin_data, npins);
} else {
/*
* Set select input
*
* If the select input value begins with 0xff, it's a quirky
* select input and the value should be interpreted as below.
* 31 23 15 7 0
* | 0xff | shift | width | select |
* It's used to work around the problem that the select
* input for some pin is not implemented in the select
* input register but in some general purpose register.
* We encode the select input value, width and shift of
* the bit field into input_val cell of pin function ID
* in device tree, and then decode them here for setting
* up the select input bits in general purpose register.
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
*/
for (i = 0; i < npins; i++) {
mux_reg = pin_data[j++];
if (input_val >> 24 == 0xff) {
u32 val = input_val;
u8 select = val & 0xff;
u8 width = (val >> 8) & 0xff;
u8 shift = (val >> 16) & 0xff;
u32 mask = ((1 << width) - 1) << shift;
/*
* The input_reg[i] here is actually some IOMUXC general
* purpose register, not regular select input register.
*/
val = readl(info->base + input_reg);
val &= ~mask;
val |= select << shift;
writel(val, info->base + input_reg);
} else if (input_reg) {
/*
* Regular select input register can never be at offset
* 0, and we only print register value for regular case.
*/
if (info->input_sel_base)
writel(input_val, info->input_sel_base +
input_reg);
else
writel(input_val, info->base + input_reg);
if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
mux_reg = -1;
dev_dbg(dev, "select_input: offset 0x%x val 0x%x\n",
input_reg, input_val);
}
/* Set config */
if (!(config_val & IMX_NO_PAD_CTL)) {
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + conf_reg,
~info->mux_mask, config_val);
conf_reg = mux_reg;
} else {
writel(config_val, info->base + conf_reg);
conf_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) &&
!conf_reg)
conf_reg = -1;
}
dev_dbg(dev, "write config: offset 0x%x val 0x%x\n",
conf_reg, config_val);
if ((mux_reg == -1) || (conf_reg == -1)) {
dev_err(dev, "Error mux_reg or conf_reg\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
input_reg = pin_data[j++];
mux_mode = pin_data[j++];
input_val = pin_data[j++];
config_val = pin_data[j++];
dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, "
"input_reg 0x%x, mux_mode 0x%x, "
"input_val 0x%x, config_val 0x%x\n",
mux_reg, conf_reg, input_reg, mux_mode,
input_val, config_val);
if (config_val & IMX_PAD_SION)
mux_mode |= IOMUXC_CONFIG_SION;
config_val &= ~IMX_PAD_SION;
/* Set Mux */
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + mux_reg,
info->mux_mask,
mux_mode << mux_shift);
} else {
writel(mux_mode, info->base + mux_reg);
}
dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n",
mux_reg, mux_mode);
/*
* Set select input
*
* If the select input value begins with 0xff,
* it's a quirky select input and the value should
* be interpreted as below.
* 31 23 15 7 0
* | 0xff | shift | width | select |
* It's used to work around the problem that the
* select input for some pin is not implemented in
* the select input register but in some general
* purpose register. We encode the select input
* value, width and shift of the bit field into
* input_val cell of pin function ID in device tree,
* and then decode them here for setting up the select
* input bits in general purpose register.
*/
if (input_val >> 24 == 0xff) {
u32 val = input_val;
u8 select = val & 0xff;
u8 width = (val >> 8) & 0xff;
u8 shift = (val >> 16) & 0xff;
u32 mask = ((1 << width) - 1) << shift;
/*
* The input_reg[i] here is actually some
* IOMUXC general purpose register, not
* regular select input register.
*/
val = readl(info->base + input_reg);
val &= ~mask;
val |= select << shift;
writel(val, info->base + input_reg);
} else if (input_reg) {
/*
* Regular select input register can never be
* at offset 0, and we only print register
* value for regular case.
*/
if (info->input_sel_base)
writel(input_val,
info->input_sel_base +
input_reg);
else
writel(input_val,
info->base + input_reg);
dev_dbg(dev, "select_input: offset 0x%x val "
"0x%x\n", input_reg, input_val);
}
/* Set config */
if (!(config_val & IMX_NO_PAD_CTL)) {
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + conf_reg,
~info->mux_mask,
config_val);
} else {
writel(config_val,
info->base + conf_reg);
}
dev_dbg(dev, "write config: offset 0x%x val "
"0x%x\n", conf_reg, config_val);
}
}
}
@ -193,6 +210,9 @@ int imx_pinctrl_probe(struct udevice *dev,
priv->dev = dev;
priv->info = info;
if (info->flags & IMX8_USE_SCU)
return 0;
addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg",
&size);
@ -238,6 +258,9 @@ int imx_pinctrl_remove(struct udevice *dev)
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
struct imx_pinctrl_soc_info *info = priv->info;
if (info->flags & IMX8_USE_SCU)
return 0;
if (info->input_sel_base)
unmap_sysmem(info->input_sel_base);
if (info->base)

16
drivers/pinctrl/nxp/pinctrl-imx.h
View File

@ -40,13 +40,29 @@ extern const struct pinctrl_ops imx_pinctrl_ops;
#define FSL_PIN_SIZE 24
#define SHARE_FSL_PIN_SIZE 20
/* Each pin on imx8qm/qxp consists of 2 u32 PIN_FUNC_ID and 1 u32 CONFIG */
#define SHARE_IMX8_PIN_SIZE 12
#define SHARE_MUX_CONF_REG 0x1
#define ZERO_OFFSET_VALID 0x2
#define CONFIG_IBE_OBE 0x4
#define IMX8_USE_SCU 0x8
#define IOMUXC_CONFIG_SION (0x1 << 4)
int imx_pinctrl_probe(struct udevice *dev, struct imx_pinctrl_soc_info *info);
int imx_pinctrl_remove(struct udevice *dev);
#ifdef CONFIG_PINCTRL_IMX_SCU
int imx_pinctrl_scu_conf_pins(struct imx_pinctrl_soc_info *info,
u32 *pin_data, int npins);
#else
static inline int imx_pinctrl_scu_conf_pins(struct imx_pinctrl_soc_info *info,
u32 *pin_data, int npins)
{
return 0;
}
#endif
#endif /* __DRIVERS_PINCTRL_IMX_H */

40
drivers/pinctrl/nxp/pinctrl-imx8.c Normal file
View File

@ -0,0 +1,40 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
*/
#include <common.h>
#include <dm/device.h>
#include <dm/pinctrl.h>
#include "pinctrl-imx.h"
DECLARE_GLOBAL_DATA_PTR;
static struct imx_pinctrl_soc_info imx8_pinctrl_soc_info = {
.flags = IMX8_USE_SCU,
};
static int imx8_pinctrl_probe(struct udevice *dev)
{
struct imx_pinctrl_soc_info *info =
(struct imx_pinctrl_soc_info *)dev_get_driver_data(dev);
return imx_pinctrl_probe(dev, info);
}
static const struct udevice_id imx8_pinctrl_match[] = {
{ .compatible = "fsl,imx8qxp-iomuxc", .data = (ulong)&imx8_pinctrl_soc_info },
{ /* sentinel */ }
};
U_BOOT_DRIVER(imx8_pinctrl) = {
.name = "imx8_pinctrl",
.id = UCLASS_PINCTRL,
.of_match = of_match_ptr(imx8_pinctrl_match),
.probe = imx8_pinctrl_probe,
.remove = imx_pinctrl_remove,
.priv_auto_alloc_size = sizeof(struct imx_pinctrl_priv),
.ops = &imx_pinctrl_ops,
.flags = DM_FLAG_PRE_RELOC,
};

66
drivers/pinctrl/nxp/pinctrl-scu.c Normal file
View File

@ -0,0 +1,66 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018 NXP
*/
#include <common.h>
#include <errno.h>
#include <linux/bitops.h>
#include <asm/io.h>
#include <asm/arch/sci/sci.h>
#include <misc.h>
#include "pinctrl-imx.h"
#define PADRING_IFMUX_EN_SHIFT 31
#define PADRING_IFMUX_EN_MASK BIT(31)
#define PADRING_GP_EN_SHIFT 30
#define PADRING_GP_EN_MASK BIT(30)
#define PADRING_IFMUX_SHIFT 27
#define PADRING_IFMUX_MASK GENMASK(29, 27)
static int imx_pinconf_scu_set(struct imx_pinctrl_soc_info *info, u32 pad,
u32 mux, u32 val)
{
int ret;
/*
* Mux should be done in pmx set, but we do not have a good api
* to handle that in scfw, so config it in pad conf func
*/
val |= PADRING_IFMUX_EN_MASK;
val |= PADRING_GP_EN_MASK;
val |= (mux << PADRING_IFMUX_SHIFT) & PADRING_IFMUX_MASK;
ret = sc_pad_set(-1, pad, val);
if (ret)
printf("%s %d\n", __func__, ret);
return 0;
}
int imx_pinctrl_scu_conf_pins(struct imx_pinctrl_soc_info *info, u32 *pin_data,
int npins)
{
int pin_id, mux, config_val;
int i, j = 0;
int ret;
/*
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
*/
for (i = 0; i < npins; i++) {
pin_id = pin_data[j++];
mux = pin_data[j++];
config_val = pin_data[j++];
ret = imx_pinconf_scu_set(info, pin_id, mux, config_val);
if (ret)
printf("Set pin %d, mux %d, val %d, error\n", pin_id,
mux, config_val);
}
return 0;
}