diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h new file mode 100644 index 0000000000..f69a55c191 --- /dev/null +++ b/include/configs/socfpga_soc64_common.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Copyright (C) 2017-2019 Intel Corporation + * + */ + +#ifndef __CONFIG_SOCFPGA_SOC64_COMMON_H__ +#define __CONFIG_SOCFPGA_SOC64_COMMON_H__ + +#include +#include + +/* + * U-Boot general configurations + */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_LOADADDR 0x2000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_REMAKE_ELF +/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */ +#define CPU_RELEASE_ADDR 0xFFD12210 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_MEM_RESERVE_SECURE 0 /* using OCRAM, not DDR */ + +/* + * U-Boot console configurations + */ +#define CONFIG_SYS_MAXARGS 64 +#define CONFIG_SYS_CBSIZE 2048 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* Extend size of kernel image for uncompression */ +#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) + +/* + * U-Boot run time memory configurations + */ +#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x40000 +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \ + + CONFIG_SYS_INIT_RAM_SIZE \ + - S10_HANDOFF_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR) +#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) + +/* + * U-Boot environment configurations + */ +#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ + +/* + * QSPI support + */ + #ifdef CONFIG_CADENCE_QSPI +/* Enable it if you want to use dual-stacked mode */ +/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/ + +/* Flash device info */ + +/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/ + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nor0=ff705000.spi.0" +#endif /* CONFIG_SPL_BUILD */ + +#ifndef __ASSEMBLY__ +unsigned int cm_get_qspi_controller_clk_hz(void); +#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() +#endif + +#endif /* CONFIG_CADENCE_QSPI */ + +/* + * Boot arguments passed to the boot command. The value of + * CONFIG_BOOTARGS goes into the environment value "bootargs". + * Do note the value will override also the chosen node in FDT blob. + */ +#define CONFIG_BOOTARGS "earlycon" +#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \ + "run mmcboot" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "bootfile=Image\0" \ + "fdt_addr=8000000\0" \ + "fdtimage=socfpga_stratix10_socdk.dtb\0" \ + "mmcroot=/dev/mmcblk0p2\0" \ + "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ + " root=${mmcroot} rw rootwait;" \ + "booti ${loadaddr} - ${fdt_addr}\0" \ + "mmcload=mmc rescan;" \ + "load mmc 0:1 ${loadaddr} ${bootfile};" \ + "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ + "linux_qspi_enable=if sf probe; then " \ + "echo Enabling QSPI at Linux DTB...;" \ + "fdt addr ${fdt_addr}; fdt resize;" \ + "fdt set /soc/spi@ff8d2000 status okay;" \ + "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \ + " ${qspi_clock}; fi; \0" \ + "scriptaddr=0x02100000\0" \ + "scriptfile=u-boot.scr\0" \ + "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \ + "then source ${scriptaddr}; fi\0" \ + "socfpga_legacy_reset_compat=1\0" + +/* + * Generic Interrupt Controller Definitions + */ +#define CONFIG_GICV2 + +/* + * External memory configurations + */ +#define PHYS_SDRAM_1 0x0 +#define PHYS_SDRAM_1_SIZE (1 * 1024 * 1024 * 1024) +#define CONFIG_SYS_SDRAM_BASE 0 +#define CONFIG_SYS_MEMTEST_START 0 +#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE - 0x200000 + +/* + * Serial / UART configurations + */ +#define CONFIG_SYS_NS16550_CLK 100000000 +#define CONFIG_SYS_NS16550_MEM32 + +/* + * Timer & watchdog configurations + */ +#define COUNTER_FREQUENCY 400000000 + +/* + * SDMMC configurations + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 +#endif +/* + * Flash configurations + */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 + +/* Ethernet on SoC (EMAC) */ +#if defined(CONFIG_CMD_NET) +#define CONFIG_DW_ALTDESCRIPTOR +#endif /* CONFIG_CMD_NET */ + +/* + * L4 Watchdog + */ +#ifdef CONFIG_SPL_BUILD +#define CONFIG_HW_WATCHDOG +#define CONFIG_DESIGNWARE_WATCHDOG +#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS +#ifndef __ASSEMBLY__ +unsigned int cm_get_l4_sys_free_clk_hz(void); +#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000) +#endif +#endif + +/* + * SPL memory layout + * + * On chip RAM + * 0xFFE0_0000 ...... Start of OCRAM + * SPL code, rwdata + * empty space + * 0xFFEx_xxxx ...... Top of stack (grows down) + * 0xFFEy_yyyy ...... Global Data + * 0xFFEz_zzzz ...... Malloc prior relocation (size CONFIG_SYS_MALLOC_F_LEN) + * 0xFFE3_F000 ...... Hardware handdoff blob (size 4KB) + * 0xFFE3_FFFF ...... End of OCRAM + * + * SDRAM + * 0x0000_0000 ...... Start of SDRAM_1 + * unused / empty space for image loading + * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE) + * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE) + * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB) + * + */ +#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex" +#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ +#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \ + - CONFIG_SPL_BSS_MAX_SIZE) +#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN) +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \ + - CONFIG_SYS_SPL_MALLOC_SIZE) + +/* SPL SDMMC boot support */ +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" + +#endif /* __CONFIG_SOCFPGA_SOC64_COMMON_H__ */ diff --git a/include/configs/socfpga_stratix10_socdk.h b/include/configs/socfpga_stratix10_socdk.h index a10cbec17f..09b46ba013 100644 --- a/include/configs/socfpga_stratix10_socdk.h +++ b/include/configs/socfpga_stratix10_socdk.h @@ -1,198 +1,12 @@ /* SPDX-License-Identifier: GPL-2.0 * - * Copyright (C) 2017-2018 Intel Corporation + * Copyright (C) 2017-2019 Intel Corporation * */ #ifndef __CONFIG_SOCFGPA_STRATIX10_H__ #define __CONFIG_SOCFGPA_STRATIX10_H__ -#include -#include +#include -/* - * U-Boot general configurations - */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_LOADADDR 0x2000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CONFIG_REMAKE_ELF -/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */ -#define CPU_RELEASE_ADDR 0xFFD12210 -#define CONFIG_SYS_CACHELINE_SIZE 64 -#define CONFIG_SYS_MEM_RESERVE_SECURE 0 /* using OCRAM, not DDR */ - -/* - * U-Boot console configurations - */ -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_CBSIZE 2048 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* Extend size of kernel image for uncompression */ -#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024) - -/* - * U-Boot run time memory configurations - */ -#define CONFIG_SYS_INIT_RAM_ADDR 0xFFE00000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x40000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR \ - + CONFIG_SYS_INIT_RAM_SIZE \ - - S10_HANDOFF_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_SP_ADDR) -#define CONFIG_SYS_MALLOC_LEN (5 * 1024 * 1024) - -/* - * U-Boot environment configurations - */ -#define CONFIG_SYS_MMC_ENV_DEV 0 /* device 0 */ - -/* - * QSPI support - */ - #ifdef CONFIG_CADENCE_QSPI -/* Enable it if you want to use dual-stacked mode */ -/*#define CONFIG_QSPI_RBF_ADDR 0x720000*/ - -/* Flash device info */ - -/*#define CONFIG_ENV_IS_IN_SPI_FLASH*/ - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_MTD_PARTITIONS -#define MTDIDS_DEFAULT "nor0=ff705000.spi.0" -#endif /* CONFIG_SPL_BUILD */ - -#ifndef __ASSEMBLY__ -unsigned int cm_get_qspi_controller_clk_hz(void); -#define CONFIG_CQSPI_REF_CLK cm_get_qspi_controller_clk_hz() -#endif - -#endif /* CONFIG_CADENCE_QSPI */ - -/* - * Boot arguments passed to the boot command. The value of - * CONFIG_BOOTARGS goes into the environment value "bootargs". - * Do note the value will override also the chosen node in FDT blob. - */ -#define CONFIG_BOOTARGS "earlycon" -#define CONFIG_BOOTCOMMAND "run fatscript; run mmcload;run linux_qspi_enable;" \ - "run mmcboot" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "bootfile=Image\0" \ - "fdt_addr=8000000\0" \ - "fdtimage=socfpga_stratix10_socdk.dtb\0" \ - "mmcroot=/dev/mmcblk0p2\0" \ - "mmcboot=setenv bootargs " CONFIG_BOOTARGS \ - " root=${mmcroot} rw rootwait;" \ - "booti ${loadaddr} - ${fdt_addr}\0" \ - "mmcload=mmc rescan;" \ - "load mmc 0:1 ${loadaddr} ${bootfile};" \ - "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ - "linux_qspi_enable=if sf probe; then " \ - "echo Enabling QSPI at Linux DTB...;" \ - "fdt addr ${fdt_addr}; fdt resize;" \ - "fdt set /soc/spi@ff8d2000 status okay;" \ - "fdt set /soc/clkmgr/clocks/qspi_clk clock-frequency " \ - " ${qspi_clock}; fi; \0" \ - "scriptaddr=0x02100000\0" \ - "scriptfile=u-boot.scr\0" \ - "fatscript=if fatload mmc 0:1 ${scriptaddr} ${scriptfile};" \ - "then source ${scriptaddr}; fi\0" \ - "socfpga_legacy_reset_compat=1\0" - -/* - * Generic Interrupt Controller Definitions - */ -#define CONFIG_GICV2 - -/* - * External memory configurations - */ -#define PHYS_SDRAM_1 0x0 -#define PHYS_SDRAM_1_SIZE (1 * 1024 * 1024 * 1024) -#define CONFIG_SYS_SDRAM_BASE 0 -#define CONFIG_SYS_MEMTEST_START 0 -#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE - 0x200000 - -/* - * Serial / UART configurations - */ -#define CONFIG_SYS_NS16550_CLK 100000000 -#define CONFIG_SYS_NS16550_MEM32 - -/* - * Timer & watchdog configurations - */ -#define COUNTER_FREQUENCY 400000000 - -/* - * SDMMC configurations - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 -#endif -/* - * Flash configurations - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 - -/* Ethernet on SoC (EMAC) */ -#if defined(CONFIG_CMD_NET) -#define CONFIG_DW_ALTDESCRIPTOR -#endif /* CONFIG_CMD_NET */ - -/* - * L4 Watchdog - */ -#ifdef CONFIG_SPL_BUILD -#define CONFIG_HW_WATCHDOG -#define CONFIG_DESIGNWARE_WATCHDOG -#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS -#ifndef __ASSEMBLY__ -unsigned int cm_get_l4_sys_free_clk_hz(void); -#define CONFIG_DW_WDT_CLOCK_KHZ (cm_get_l4_sys_free_clk_hz() / 1000) -#endif -#endif - -/* - * SPL memory layout - * - * On chip RAM - * 0xFFE0_0000 ...... Start of OCRAM - * SPL code, rwdata - * empty space - * 0xFFEx_xxxx ...... Top of stack (grows down) - * 0xFFEy_yyyy ...... Global Data - * 0xFFEz_zzzz ...... Malloc prior relocation (size CONFIG_SYS_MALLOC_F_LEN) - * 0xFFE3_F000 ...... Hardware handdoff blob (size 4KB) - * 0xFFE3_FFFF ...... End of OCRAM - * - * SDRAM - * 0x0000_0000 ...... Start of SDRAM_1 - * unused / empty space for image loading - * Size 64MB ...... MALLOC (size CONFIG_SYS_SPL_MALLOC_SIZE) - * Size 1MB ...... BSS (size CONFIG_SPL_BSS_MAX_SIZE) - * 0x8000_0000 ...... End of SDRAM_1 (assume 2GB) - * - */ -#define CONFIG_SPL_TARGET "spl/u-boot-spl.hex" -#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE -#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR -#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */ -#define CONFIG_SPL_BSS_START_ADDR (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE \ - - CONFIG_SPL_BSS_MAX_SIZE) -#define CONFIG_SYS_SPL_MALLOC_SIZE (CONFIG_SYS_MALLOC_LEN) -#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \ - - CONFIG_SYS_SPL_MALLOC_SIZE) - -/* SPL SDMMC boot support */ -#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" - -#endif /* __CONFIG_H */ +#endif /* __CONFIG_SOCFGPA_STRATIX10_H__ */