mx6sabresd: Convert PCI to driver model

Convert imx6sabresd PCI to driver model to fix the following warning:

===================== WARNING ======================
This board does not use CONFIG_DM_PCI Please update
the board to use CONFIG_DM_PCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================

After the conversion the following commands were used for testing:

=> pci enum
PCI: Failed autoconfig bar 10
PCI: Failed autoconfig bar 10
=> pci 1
Scanning PCI devices on bus 1
BusDevFun  VendorId   DeviceId   Device Class       Sub-Class
Reviewed-by: Fabio Estevam <festevam@gmail.com>
This commit is contained in:
Alifer Moraes 2020-01-20 13:31:02 -03:00 committed by Stefano Babic
parent 70a2df36fe
commit 2f2fdbe3f4
2 changed files with 1 additions and 11 deletions

View File

@ -231,16 +231,6 @@ static void setup_spi(void)
SETUP_IOMUX_PADS(ecspi1_pads);
}
iomux_v3_cfg_t const pcie_pads[] = {
IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* POWER */
IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* RESET */
};
static void setup_pcie(void)
{
SETUP_IOMUX_PADS(pcie_pads);
}
iomux_v3_cfg_t const di0_pads[] = {
IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK), /* DISP0_CLK */
IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* DISP0_HSYNC */
@ -508,7 +498,6 @@ int overwrite_console(void)
int board_eth_init(bd_t *bis)
{
setup_iomux_enet();
setup_pcie();
return cpu_eth_init(bis);
}

View File

@ -83,6 +83,7 @@ CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHYLIB=y
CONFIG_MII=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_REGULATOR=y