mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-29 08:00:26 +09:00
nand: atmel: Fix not calling dev_xxx with a device
Use mtd_info to get a device to log with. Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Patrick Delaunay <patrick.delaunay@st.com>
This commit is contained in:
parent
fe6e209a27
commit
2e8c907aba
@ -424,7 +424,8 @@ static int pmecc_err_location(struct mtd_info *mtd)
|
||||
}
|
||||
|
||||
if (!timeout) {
|
||||
dev_err(host->dev, "atmel_nand : Timeout to calculate PMECC error location\n");
|
||||
dev_err(mtd->dev,
|
||||
"Timeout to calculate PMECC error location\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
@ -464,7 +465,8 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
|
||||
*(buf + byte_pos) ^= (1 << bit_pos);
|
||||
|
||||
pos = sector_num * host->pmecc_sector_size + byte_pos;
|
||||
dev_dbg(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
|
||||
dev_dbg(mtd->dev,
|
||||
"Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
|
||||
pos, bit_pos, err_byte, *(buf + byte_pos));
|
||||
} else {
|
||||
/* Bit flip in OOB area */
|
||||
@ -474,7 +476,8 @@ static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
|
||||
ecc[tmp] ^= (1 << bit_pos);
|
||||
|
||||
pos = tmp + nand_chip->ecc.layout->eccpos[0];
|
||||
dev_dbg(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
|
||||
dev_dbg(mtd->dev,
|
||||
"Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
|
||||
pos, bit_pos, err_byte, ecc[tmp]);
|
||||
}
|
||||
|
||||
@ -516,7 +519,7 @@ normal_check:
|
||||
|
||||
err_nbr = pmecc_err_location(mtd);
|
||||
if (err_nbr == -1) {
|
||||
dev_err(host->dev, "PMECC: Too many errors\n");
|
||||
dev_err(mtd->dev, "PMECC: Too many errors\n");
|
||||
mtd->ecc_stats.failed++;
|
||||
return -EBADMSG;
|
||||
} else {
|
||||
@ -560,7 +563,7 @@ static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
|
||||
}
|
||||
|
||||
if (!timeout) {
|
||||
dev_err(host->dev, "atmel_nand : Timeout to read PMECC page\n");
|
||||
dev_err(mtd->dev, "Timeout to read PMECC page\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
@ -600,7 +603,8 @@ static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
|
||||
}
|
||||
|
||||
if (!timeout) {
|
||||
dev_err(host->dev, "atmel_nand : Timeout to read PMECC status, fail to write PMECC in oob\n");
|
||||
dev_err(mtd->dev,
|
||||
"Timeout to read PMECC status, fail to write PMECC in oob\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
@ -713,7 +717,8 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
|
||||
|
||||
if (*cap == 0 && *sector_size == 0) {
|
||||
/* Non-ONFI compliant */
|
||||
dev_info(host->dev, "NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes\n");
|
||||
dev_info(chip->mtd.dev,
|
||||
"NAND chip is not ONFI compliant, assume ecc_bits is 2 in 512 bytes\n");
|
||||
*cap = 2;
|
||||
*sector_size = 512;
|
||||
}
|
||||
@ -835,17 +840,20 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
|
||||
* from ONFI.
|
||||
*/
|
||||
if (pmecc_choose_ecc(host, nand, &cap, §or_size)) {
|
||||
dev_err(host->dev, "Required ECC %d bits in %d bytes not supported!\n",
|
||||
dev_err(mtd->dev,
|
||||
"Required ECC %d bits in %d bytes not supported!\n",
|
||||
cap, sector_size);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (cap > host->pmecc_corr_cap)
|
||||
dev_info(host->dev, "WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n",
|
||||
host->pmecc_corr_cap, cap);
|
||||
dev_info(mtd->dev,
|
||||
"WARNING: Using different ecc correct bits(%d bit) from Nand ONFI ECC reqirement (%d bit).\n",
|
||||
host->pmecc_corr_cap, cap);
|
||||
if (sector_size < host->pmecc_sector_size)
|
||||
dev_info(host->dev, "WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n",
|
||||
host->pmecc_sector_size, sector_size);
|
||||
dev_info(mtd->dev,
|
||||
"WARNING: Using different ecc correct sector size (%d bytes) from Nand ONFI ECC reqirement (%d bytes).\n",
|
||||
host->pmecc_sector_size, sector_size);
|
||||
#else /* CONFIG_SYS_NAND_ONFI_DETECTION */
|
||||
host->pmecc_corr_cap = CONFIG_PMECC_CAP;
|
||||
host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
|
||||
@ -877,7 +885,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
|
||||
#if defined(NO_GALOIS_TABLE_IN_ROM)
|
||||
pmecc_galois_table = create_lookup_table(host->pmecc_sector_size);
|
||||
if (!pmecc_galois_table) {
|
||||
dev_err(host->dev, "out of memory\n");
|
||||
dev_err(mtd->dev, "out of memory\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
@ -909,13 +917,14 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
|
||||
host->pmecc_sector_number;
|
||||
|
||||
if (nand->ecc.bytes > MTD_MAX_ECCPOS_ENTRIES_LARGE) {
|
||||
dev_err(host->dev, "too large eccpos entries. max support ecc.bytes is %d\n",
|
||||
MTD_MAX_ECCPOS_ENTRIES_LARGE);
|
||||
dev_err(mtd->dev,
|
||||
"too large eccpos entries. max support ecc.bytes is %d\n",
|
||||
MTD_MAX_ECCPOS_ENTRIES_LARGE);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (nand->ecc.bytes > mtd->oobsize - PMECC_OOB_RESERVED_BYTES) {
|
||||
dev_err(host->dev, "No room for ECC bytes\n");
|
||||
dev_err(mtd->dev, "No room for ECC bytes\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
|
||||
@ -926,7 +935,8 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
|
||||
case 512:
|
||||
case 1024:
|
||||
/* TODO */
|
||||
dev_err(host->dev, "Unsupported page size for PMECC, use Software ECC\n");
|
||||
dev_err(mtd->dev,
|
||||
"Unsupported page size for PMECC, use Software ECC\n");
|
||||
default:
|
||||
/* page size not handled by HW ECC */
|
||||
/* switching back to soft ECC */
|
||||
@ -940,7 +950,8 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
|
||||
|
||||
/* Allocate data for PMECC computation */
|
||||
if (pmecc_data_alloc(host)) {
|
||||
dev_err(host->dev, "Cannot allocate memory for PMECC computation!\n");
|
||||
dev_err(mtd->dev,
|
||||
"Cannot allocate memory for PMECC computation!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
@ -951,7 +962,7 @@ static int atmel_pmecc_nand_init_params(struct nand_chip *nand,
|
||||
|
||||
/* Check the PMECC ip version */
|
||||
host->pmecc_version = pmecc_readl(host->pmerrloc, version);
|
||||
dev_dbg(host->dev, "PMECC IP version is: %x\n", host->pmecc_version);
|
||||
dev_dbg(mtd->dev, "PMECC IP version is: %x\n", host->pmecc_version);
|
||||
|
||||
atmel_pmecc_core_init(mtd);
|
||||
|
||||
@ -1114,8 +1125,8 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
|
||||
/* it doesn't seems to be a freshly
|
||||
* erased block.
|
||||
* We can't correct so many errors */
|
||||
dev_warn(host->dev, "atmel_nand : multiple errors detected."
|
||||
" Unable to correct.\n");
|
||||
dev_warn(mtd->dev,
|
||||
"multiple errors detected. Unable to correct.\n");
|
||||
return -EBADMSG;
|
||||
}
|
||||
|
||||
@ -1124,15 +1135,14 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
|
||||
/* there's nothing much to do here.
|
||||
* the bit error is on the ECC itself.
|
||||
*/
|
||||
dev_warn(host->dev, "atmel_nand : one bit error on ECC code."
|
||||
" Nothing to correct\n");
|
||||
dev_warn(mtd->dev,
|
||||
"one bit error on ECC code. Nothing to correct\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
dev_warn(host->dev, "atmel_nand : one bit error on data."
|
||||
" (word offset in the page :"
|
||||
" 0x%x bit offset : 0x%x)\n",
|
||||
ecc_word, ecc_bit);
|
||||
dev_warn(mtd->dev,
|
||||
"one bit error on data. (word offset in the page : 0x%x bit offset : 0x%x)\n",
|
||||
ecc_word, ecc_bit);
|
||||
/* correct the error */
|
||||
if (nand_chip->options & NAND_BUSWIDTH_16) {
|
||||
/* 16 bits words */
|
||||
@ -1141,7 +1151,7 @@ static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
|
||||
/* 8 bits words */
|
||||
dat[ecc_word] ^= (1 << ecc_bit);
|
||||
}
|
||||
dev_warn(host->dev, "atmel_nand : error corrected\n");
|
||||
dev_warn(mtd->dev, "error corrected\n");
|
||||
return 1;
|
||||
}
|
||||
|
||||
@ -1511,7 +1521,6 @@ void board_nand_init(void)
|
||||
int i;
|
||||
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
|
||||
if (atmel_nand_chip_init(i, base_addr[i]))
|
||||
dev_err(host->dev, "atmel_nand: Fail to initialize #%d chip",
|
||||
i);
|
||||
log_err("atmel_nand: Fail to initialize #%d chip", i);
|
||||
}
|
||||
#endif /* CONFIG_SPL_BUILD */
|
||||
|
Loading…
Reference in New Issue
Block a user