mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
mmc: zynq_sdhci: Add clock phase delays for Versal
Define default values for input and output clock phase delays for Versal. Also define functions for setting tapdelays based on these clock phase delays. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
This commit is contained in:
Ashok Reddy Soma
Michal Simek
parent
f4b297bbfd
commit
2e819a77b9
|
|
@ -19,6 +19,12 @@
|
|||
#include <sdhci.h>
|
||||
#include <zynqmp_tap_delay.h>
|
||||
|
||||
#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8
|
||||
#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC
|
||||
#define SDHCI_ITAPDLY_CHGWIN 0x200
|
||||
#define SDHCI_ITAPDLY_ENABLE 0x100
|
||||
#define SDHCI_OTAPDLY_ENABLE 0x40
|
||||
|
||||
#define SDHCI_TUNING_LOOP_COUNT 40
|
||||
#define MMC_BANK2 0x2
|
||||
|
||||
|
|
@ -40,11 +46,15 @@ struct arasan_sdhci_priv {
|
|||
u8 no_1p8;
|
||||
};
|
||||
|
||||
#if defined(CONFIG_ARCH_ZYNQMP)
|
||||
#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
|
||||
/* Default settings for ZynqMP Clock Phases */
|
||||
const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0};
|
||||
const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0};
|
||||
|
||||
/* Default settings for Versal Clock Phases */
|
||||
const u32 versal_iclk_phases[] = {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0};
|
||||
const u32 versal_oclk_phases[] = {0, 60, 48, 0, 48, 72, 90, 36, 60, 90, 0};
|
||||
|
||||
static const u8 mode2timing[] = {
|
||||
[MMC_LEGACY] = MMC_TIMING_LEGACY,
|
||||
[MMC_HS] = MMC_TIMING_MMC_HS,
|
||||
|
|
@ -278,6 +288,138 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host,
|
|||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays
|
||||
*
|
||||
* Set the SD Output Clock Tap Delays for Output path
|
||||
*
|
||||
* @host: Pointer to the sdhci_host structure.
|
||||
* @degrees The clock phase shift between 0 - 359.
|
||||
* Return: 0 on success and error value on error
|
||||
*/
|
||||
static int sdhci_versal_sdcardclk_set_phase(struct sdhci_host *host,
|
||||
int degrees)
|
||||
{
|
||||
struct mmc *mmc = (struct mmc *)host->mmc;
|
||||
u8 tap_delay, tap_max = 0;
|
||||
int ret;
|
||||
int timing = mode2timing[mmc->selected_mode];
|
||||
|
||||
/*
|
||||
* This is applicable for SDHCI_SPEC_300 and above
|
||||
* Versal does not set phase for <=25MHz clock.
|
||||
* If degrees is zero, no need to do anything.
|
||||
*/
|
||||
if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 ||
|
||||
timing == MMC_TIMING_LEGACY ||
|
||||
timing == MMC_TIMING_UHS_SDR12 || !degrees)
|
||||
return 0;
|
||||
|
||||
switch (timing) {
|
||||
case MMC_TIMING_MMC_HS:
|
||||
case MMC_TIMING_SD_HS:
|
||||
case MMC_TIMING_UHS_SDR25:
|
||||
case MMC_TIMING_UHS_DDR50:
|
||||
case MMC_TIMING_MMC_DDR52:
|
||||
/* For 50MHz clock, 30 Taps are available */
|
||||
tap_max = 30;
|
||||
break;
|
||||
case MMC_TIMING_UHS_SDR50:
|
||||
/* For 100MHz clock, 15 Taps are available */
|
||||
tap_max = 15;
|
||||
break;
|
||||
case MMC_TIMING_UHS_SDR104:
|
||||
case MMC_TIMING_MMC_HS200:
|
||||
/* For 200MHz clock, 8 Taps are available */
|
||||
tap_max = 8;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
tap_delay = (degrees * tap_max) / 360;
|
||||
|
||||
/* Set the Clock Phase */
|
||||
if (tap_delay) {
|
||||
u32 regval;
|
||||
|
||||
regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER);
|
||||
regval |= SDHCI_OTAPDLY_ENABLE;
|
||||
sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
|
||||
regval |= tap_delay;
|
||||
sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays
|
||||
*
|
||||
* Set the SD Input Clock Tap Delays for Input path
|
||||
*
|
||||
* @host: Pointer to the sdhci_host structure.
|
||||
* @degrees The clock phase shift between 0 - 359.
|
||||
* Return: 0 on success and error value on error
|
||||
*/
|
||||
static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host,
|
||||
int degrees)
|
||||
{
|
||||
struct mmc *mmc = (struct mmc *)host->mmc;
|
||||
u8 tap_delay, tap_max = 0;
|
||||
int ret;
|
||||
int timing = mode2timing[mmc->selected_mode];
|
||||
|
||||
/*
|
||||
* This is applicable for SDHCI_SPEC_300 and above
|
||||
* Versal does not set phase for <=25MHz clock.
|
||||
* If degrees is zero, no need to do anything.
|
||||
*/
|
||||
if (SDHCI_GET_VERSION(host) < SDHCI_SPEC_300 ||
|
||||
timing == MMC_TIMING_LEGACY ||
|
||||
timing == MMC_TIMING_UHS_SDR12 || !degrees)
|
||||
return 0;
|
||||
|
||||
switch (timing) {
|
||||
case MMC_TIMING_MMC_HS:
|
||||
case MMC_TIMING_SD_HS:
|
||||
case MMC_TIMING_UHS_SDR25:
|
||||
case MMC_TIMING_UHS_DDR50:
|
||||
case MMC_TIMING_MMC_DDR52:
|
||||
/* For 50MHz clock, 120 Taps are available */
|
||||
tap_max = 120;
|
||||
break;
|
||||
case MMC_TIMING_UHS_SDR50:
|
||||
/* For 100MHz clock, 60 Taps are available */
|
||||
tap_max = 60;
|
||||
break;
|
||||
case MMC_TIMING_UHS_SDR104:
|
||||
case MMC_TIMING_MMC_HS200:
|
||||
/* For 200MHz clock, 30 Taps are available */
|
||||
tap_max = 30;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
tap_delay = (degrees * tap_max) / 360;
|
||||
|
||||
/* Set the Clock Phase */
|
||||
if (tap_delay) {
|
||||
u32 regval;
|
||||
|
||||
regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER);
|
||||
regval |= SDHCI_ITAPDLY_CHGWIN;
|
||||
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
|
||||
regval |= SDHCI_ITAPDLY_ENABLE;
|
||||
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
|
||||
regval |= tap_delay;
|
||||
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
|
||||
regval &= ~SDHCI_ITAPDLY_CHGWIN;
|
||||
sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
|
||||
{
|
||||
struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev);
|
||||
|
|
@ -294,6 +436,10 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host)
|
|||
device_is_compatible(dev, "xlnx,zynqmp-8.9a")) {
|
||||
sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase);
|
||||
sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase);
|
||||
} else if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
|
||||
device_is_compatible(dev, "xlnx,versal-8.9a")) {
|
||||
sdhci_versal_sampleclk_set_phase(host, iclk_phase);
|
||||
sdhci_versal_sdcardclk_set_phase(host, oclk_phase);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -346,6 +492,14 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev)
|
|||
}
|
||||
}
|
||||
|
||||
if (IS_ENABLED(CONFIG_ARCH_VERSAL) &&
|
||||
device_is_compatible(dev, "xlnx,versal-8.9a")) {
|
||||
for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) {
|
||||
clk_data->clk_phase_in[i] = versal_iclk_phases[i];
|
||||
clk_data->clk_phase_out[i] = versal_oclk_phases[i];
|
||||
}
|
||||
}
|
||||
|
||||
arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY,
|
||||
"clk-phase-legacy");
|
||||
arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS,
|
||||
|
|
@ -388,9 +542,7 @@ static void arasan_sdhci_set_control_reg(struct sdhci_host *host)
|
|||
mmc->selected_mode <= UHS_DDR50)
|
||||
sdhci_set_uhs_timing(host);
|
||||
}
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_ARCH_ZYNQMP)
|
||||
const struct sdhci_ops arasan_ops = {
|
||||
.platform_execute_tuning = &arasan_sdhci_execute_tuning,
|
||||
.set_delay = &arasan_sdhci_set_tapdelay,
|
||||
|
|
@ -471,7 +623,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
|
|||
|
||||
priv->host->name = dev->name;
|
||||
|
||||
#if defined(CONFIG_ARCH_ZYNQMP)
|
||||
#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL)
|
||||
priv->host->ops = &arasan_ops;
|
||||
arasan_dt_parse_clk_phases(dev);
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user