meson: use the clock driver

Use the clk framework to initialize clocks from drivers that need them
instead of having hardcoded frequencies and initializations from board
code.

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Beniamino Galvani 2018-06-14 13:43:40 +02:00 committed by Tom Rini
parent c0fc1e215c
commit 2e668af553
5 changed files with 18 additions and 22 deletions

View File

@ -56,14 +56,4 @@
/* Ethernet memory power domain */
#define GX_MEM_PD_REG_0_ETH_MASK (BIT(2) | BIT(3))
/* Clock gates */
#define GX_GCLK_MPEG_0 GX_HIU_ADDR(0x50)
#define GX_GCLK_MPEG_1 GX_HIU_ADDR(0x51)
#define GX_GCLK_MPEG_2 GX_HIU_ADDR(0x52)
#define GX_GCLK_MPEG_OTHER GX_HIU_ADDR(0x53)
#define GX_GCLK_MPEG_AO GX_HIU_ADDR(0x54)
#define GX_GCLK_MPEG_0_I2C BIT(9)
#define GX_GCLK_MPEG_1_ETH BIT(3)
#endif /* __GX_H__ */

View File

@ -48,7 +48,6 @@ void meson_gx_eth_init(phy_interface_t mode, unsigned int flags)
return;
}
/* Enable power and clock gate */
setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
/* Enable power gate */
clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
}

View File

@ -32,10 +32,6 @@ int misc_init_r(void)
meson_gx_eth_init(PHY_INTERFACE_MODE_RMII,
MESON_GXL_USE_INTERNAL_RMII_PHY);
/* Enable power and clock gate */
setbits_le32(GX_GCLK_MPEG_1, GX_GCLK_MPEG_1_ETH);
clrbits_le32(GX_MEM_PD_REG_0, GX_MEM_PD_REG_0_ETH_MASK);
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
mac_addr, EFUSE_MAC_SIZE);

View File

@ -30,9 +30,6 @@ int misc_init_r(void)
meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
/* Enable power and clock gate */
setbits_le32(GX_GCLK_MPEG_0, GX_GCLK_MPEG_0_I2C);
/* Reset PHY on GPIOZ_14 */
clrbits_le32(GX_GPIO_EN(3), BIT(14));
clrbits_le32(GX_GPIO_OUT(3), BIT(14));

View File

@ -3,8 +3,8 @@
* (C) Copyright 2017 - Beniamino Galvani <b.galvani@gmail.com>
*/
#include <common.h>
#include <asm/arch/i2c.h>
#include <asm/io.h>
#include <clk.h>
#include <dm.h>
#include <i2c.h>
@ -42,6 +42,7 @@ struct i2c_regs {
};
struct meson_i2c {
struct clk clk;
struct i2c_regs *regs;
struct i2c_msg *msg; /* Current I2C message */
bool last; /* Whether the message is the last */
@ -221,9 +222,13 @@ static int meson_i2c_xfer(struct udevice *bus, struct i2c_msg *msg,
static int meson_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
{
struct meson_i2c *i2c = dev_get_priv(bus);
unsigned int clk_rate = MESON_I2C_CLK_RATE;
ulong clk_rate;
unsigned int div;
clk_rate = clk_get_rate(&i2c->clk);
if (IS_ERR_VALUE(clk_rate))
return -EINVAL;
div = DIV_ROUND_UP(clk_rate, speed * 4);
/* clock divider has 12 bits */
@ -238,7 +243,7 @@ static int meson_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
clrsetbits_le32(&i2c->regs->ctrl, REG_CTRL_CLKDIVEXT_MASK,
(div >> 10) << REG_CTRL_CLKDIVEXT_SHIFT);
debug("meson i2c: set clk %u, src %u, div %u\n", speed, clk_rate, div);
debug("meson i2c: set clk %u, src %lu, div %u\n", speed, clk_rate, div);
return 0;
}
@ -246,6 +251,15 @@ static int meson_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
static int meson_i2c_probe(struct udevice *bus)
{
struct meson_i2c *i2c = dev_get_priv(bus);
int ret;
ret = clk_get_by_index(bus, 0, &i2c->clk);
if (ret < 0)
return ret;
ret = clk_enable(&i2c->clk);
if (ret)
return ret;
i2c->regs = dev_read_addr_ptr(bus);
clrbits_le32(&i2c->regs->ctrl, REG_CTRL_START);