From 2e5983d2ea5ff21406408c18c5b8fa12d4250908 Mon Sep 17 00:00:00 2001 From: wdenk Date: Tue, 15 Jul 2003 20:04:06 +0000 Subject: [PATCH] Patches by Kshitij, 04 Jul 2003 - added support for arm925t cpu core - added support for TI OMAP 1510 Innovator Board --- CHANGELOG | 4 + MAINTAINERS | 3 + MAKEALL | 2 +- Makefile | 5 +- README | 7 +- board/omap1510inn/Makefile | 47 ++ board/omap1510inn/config.mk | 25 + board/omap1510inn/flash.c | 428 ++++++++++++++++ board/omap1510inn/omap1510innovator.c | 131 +++++ board/omap1510inn/platform.S | 386 +++++++++++++++ board/omap1510inn/u-boot.lds | 58 +++ cpu/arm925t/Makefile | 43 ++ cpu/arm925t/config.mk | 27 + cpu/arm925t/cpu.c | 159 ++++++ cpu/arm925t/interrupts.c | 301 +++++++++++ cpu/arm925t/omap925.c | 73 +++ cpu/arm925t/start.S | 424 ++++++++++++++++ drivers/ns16550.c | 7 + drivers/serial.c | 21 +- include/arm925t.h | 15 + include/asm-arm/arch-arm925t/sizes.h | 50 ++ include/configs/lwmon.h | 18 +- include/configs/omap1510.h | 687 ++++++++++++++++++++++++++ include/configs/omap1510inn.h | 170 +++++++ include/ns16550.h | 11 + 25 files changed, 3088 insertions(+), 14 deletions(-) create mode 100644 board/omap1510inn/Makefile create mode 100644 board/omap1510inn/config.mk create mode 100644 board/omap1510inn/flash.c create mode 100644 board/omap1510inn/omap1510innovator.c create mode 100644 board/omap1510inn/platform.S create mode 100644 board/omap1510inn/u-boot.lds create mode 100644 cpu/arm925t/Makefile create mode 100644 cpu/arm925t/config.mk create mode 100644 cpu/arm925t/cpu.c create mode 100644 cpu/arm925t/interrupts.c create mode 100644 cpu/arm925t/omap925.c create mode 100644 cpu/arm925t/start.S create mode 100644 include/arm925t.h create mode 100644 include/asm-arm/arch-arm925t/sizes.h create mode 100644 include/configs/omap1510.h create mode 100644 include/configs/omap1510inn.h diff --git a/CHANGELOG b/CHANGELOG index cc1d8c70c8..5f56755345 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,10 @@ Changes for U-Boot 0.4.3: ====================================================================== +* Patches by Kshitij, 04 Jul 2003 + - added support for arm925t cpu core + - added support for TI OMAP 1510 Innovator Board + * Patches by Martin Krause, 14 Jul 2003: - add I2C support for s3c2400 systems (trab board) - (re-) add "ping" to command table diff --git a/MAINTAINERS b/MAINTAINERS index 50b824b9d5..69263cef92 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -274,6 +274,9 @@ Gary Jennejohn smdk2400 ARM920T trab ARM920T +Kshitij Gupta + omap1510inn ARM925T + David Müller smdk2410 ARM920T diff --git a/MAKEALL b/MAKEALL index ae49753e02..112971e84b 100644 --- a/MAKEALL +++ b/MAKEALL @@ -108,7 +108,7 @@ LIST_ARM7="ep7312 impa7" ## ARM9 Systems ######################################################################### -LIST_ARM9="at91rm9200dk smdk2400 smdk2410 trab VCMA9" +LIST_ARM9="at91rm9200dk omap1510inn smdk2400 smdk2410 trab VCMA9" ######################################################################### ## Xscale Systems diff --git a/Makefile b/Makefile index 5efe4e9de4..c205630856 100644 --- a/Makefile +++ b/Makefile @@ -720,11 +720,14 @@ shannon_config : unconfig @./mkconfig $(@:_config=) arm sa1100 shannon ######################################################################### -## ARM920T Systems +## ARM92xT Systems ######################################################################### xtract_trab = $(subst _big_flash,,$(subst _config,,$1)) +omap1510inn_config : unconfig + @./mkconfig $(@:_config=) arm arm925t omap1510inn + smdk2400_config : unconfig @./mkconfig $(@:_config=) arm arm920t smdk2400 diff --git a/README b/README index ab78984ad2..8224128886 100644 --- a/README +++ b/README @@ -140,12 +140,14 @@ Directory Hierarchy: - tools Tools to build S-Record or U-Boot images, etc. - cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs +- cpu/arm925t Files specific to ARM 925 CPUs - cpu/mpc5xx Files specific to Motorola MPC5xx CPUs - cpu/mpc8xx Files specific to Motorola MPC8xx CPUs - cpu/mpc824x Files specific to Motorola MPC824x CPUs - cpu/mpc8260 Files specific to Motorola MPC8260 CPU - cpu/ppc4xx Files specific to IBM 4xx CPUs + - board/LEOX/ Files specific to boards manufactured by The LEOX team - board/LEOX/elpt860 Files specific to ELPT860 boards - board/RPXClassic @@ -204,6 +206,8 @@ Directory Hierarchy: - board/mvs1 Files specific to MVS1 boards - board/nx823 Files specific to NX823 boards - board/oxc Files specific to OXC boards +- board/omap1510inn + Files specific to OMAP 1510 Innovator boards - board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards - board/pm826 Files specific to PM826 boards - board/ppmc8260 @@ -353,6 +357,7 @@ The following options need to be configured: CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312, CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK, + CONFIG_INNOVATOROMAP1510, CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_AT91RM9200DK @@ -1857,7 +1862,7 @@ configurations; the following names are supported: GENIETV_config TQM823L_config PIP405_config GEN860T_config EBONY_config FPS860L_config ELPT860_config cmi_mpc5xx_config NETVIA_config - at91rm9200dk_config + at91rm9200dk_config omap1510inn_config Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for diff --git a/board/omap1510inn/Makefile b/board/omap1510inn/Makefile new file mode 100644 index 0000000000..28996ba9c6 --- /dev/null +++ b/board/omap1510inn/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS := omap1510innovator.o flash.o +SOBJS := platform.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +-include .depend + +######################################################################### diff --git a/board/omap1510inn/config.mk b/board/omap1510inn/config.mk new file mode 100644 index 0000000000..c5fd706f99 --- /dev/null +++ b/board/omap1510inn/config.mk @@ -0,0 +1,25 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# David Mueller, ELSOFT AG, +# +# (C) Copyright 2003 +# Texas Instruments, +# Kshitij Gupta +# +# TI Innovator board with OMAP1510 (ARM925T) cpu +# see http://www.ti.com/ for more information on Texas Insturments +# +# Innovator has 1 bank of 256 MB SDRAM +# Physical Address: +# 1000'0000 to 2000'0000 +# +# +# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved) +# +# we load ourself to 1100'0000 +# +# + + +TEXT_BASE = 0x11000000 diff --git a/board/omap1510inn/flash.c b/board/omap1510inn/flash.c new file mode 100644 index 0000000000..6b2739d3ab --- /dev/null +++ b/board/omap1510inn/flash.c @@ -0,0 +1,428 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/* Board support for 1 or 2 flash devices */ +#undef FLASH_PORT_WIDTH32 +#define FLASH_PORT_WIDTH16 + +#ifdef FLASH_PORT_WIDTH16 +#define FLASH_PORT_WIDTH ushort +#define FLASH_PORT_WIDTHV vu_short +#define SWAP(x) __swab16(x) +#else +#define FLASH_PORT_WIDTH ulong +#define FLASH_PORT_WIDTHV vu_long +#define SWAP(x) __swab32(x) +#endif + +#define FPW FLASH_PORT_WIDTH +#define FPWV FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (FPW * addr, flash_info_t * info); +static int write_data (flash_info_t * info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t * info); +void inline spin_wheel (void); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + int i; + ulong size = 0; + + for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + switch (i) { + case 0: + flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); + flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); + break; + default: + panic ("configured to many flash banks!\n"); + break; + } + size += flash_info[i].size; + } + + /* Protect monitor and environment sectors + */ + flash_protect ( FLAG_PROTECT_SET, + CFG_FLASH_BASE, + CFG_FLASH_BASE + monitor_flash_len - 1, + &flash_info[0]); + + flash_protect ( FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SIZE - 1, + &flash_info[0]); + + return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + return; + } + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { + for (i = 0; i < info->sector_count; i++) { + info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); + info->protect[i] = 0; + } + } +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_INTEL: + printf ("INTEL "); + break; + default: + printf ("Unknown Vendor "); + break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_28F128J3A: + printf ("28F128J3A\n"); + break; + default: + printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf ("\n"); + return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW * addr, flash_info_t * info) +{ + volatile FPW value; + + /* Write auto select command: read Manufacturer ID */ + addr[0x5555] = (FPW) 0x00AA00AA; + addr[0x2AAA] = (FPW) 0x00550055; + addr[0x5555] = (FPW) 0x00900090; + + mb (); + value = addr[0]; + + switch (value) { + + case (FPW) INTEL_MANUFACT: + info->flash_id = FLASH_MAN_INTEL; + break; + + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + return (0); /* no or unknown flash */ + } + + mb (); + value = addr[1]; /* device ID */ + switch (value) { + + case (FPW) INTEL_ID_28F128J3A: + info->flash_id += FLASH_28F128J3A; + info->sector_count = 128; + info->size = 0x02000000; + break; /* => 16 MB */ + + default: + info->flash_id = FLASH_UNKNOWN; + break; + } + + if (info->sector_count > CFG_MAX_FLASH_SECT) { + printf ("** ERROR: sector count %d > max (%d) **\n", + info->sector_count, CFG_MAX_FLASH_SECT); + info->sector_count = CFG_MAX_FLASH_SECT; + } + + addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ + + return (info->size); +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ + int flag, prot, sect; + ulong type, start, last; + int rcode = 0; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + type = (info->flash_id & FLASH_VENDMASK); + if ((type != FLASH_MAN_INTEL)) { + printf ("Can't erase unknown flash type %08lx - aborted\n", + info->flash_id); + return 1; + } + + prot = 0; + for (sect = s_first; sect <= s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + /*start = get_timer (0); */ + last = start; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect <= s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + FPWV *addr = (FPWV *) (info->start[sect]); + FPW status; + + printf ("Erasing sector %2d ... ", sect); + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + *addr = (FPW) 0x00500050; /* clear status register */ + *addr = (FPW) 0x00200020; /* erase setup */ + *addr = (FPW) 0x00D000D0; /* erase confirm */ + + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + *addr = (FPW) 0x00B000B0; /* suspend erase */ + *addr = (FPW) 0x00FF00FF; /* reset to read mode */ + rcode = 1; + break; + } + } + + *addr = (FPW) 0x00500050; /* clear status register cmd. */ + *addr = (FPW) 0x00FF00FF; /* resest to read mode */ + + printf (" done\n"); + } + } + return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ + ulong cp, wp; + FPW data; + int count, i, l, rc, port_width; + + if (info->flash_id == FLASH_UNKNOWN) { + return 4; + } +/* get lower word aligned address */ +#ifdef FLASH_PORT_WIDTH16 + wp = (addr & ~1); + port_width = 2; +#else + wp = (addr & ~3); + port_width = 4; +#endif + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i = 0, cp = wp; i < l; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + for (; i < port_width && cnt > 0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt == 0 && i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + return (rc); + } + wp += port_width; + } + + /* + * handle word aligned part + */ + count = 0; + while (cnt >= port_width) { + data = 0; + for (i = 0; i < port_width; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_data (info, wp, SWAP (data))) != 0) { + return (rc); + } + wp += port_width; + cnt -= port_width; + if (count++ > 0x800) { + spin_wheel (); + count = 0; + } + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i < port_width; ++i, ++cp) { + data = (data << 8) | (*(uchar *) cp); + } + + return (write_data (info, wp, SWAP (data))); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t * info, ulong dest, FPW data) +{ + FPWV *addr = (FPWV *) dest; + ulong status; + int flag; + + /* Check if Flash is (sufficiently) erased */ + if ((*addr & data) != data) { + printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); + return (2); + } + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + *addr = (FPW) 0x00400040; /* write setup */ + *addr = data; + + /* arm simple, non interrupt dependent timer */ + reset_timer_masked (); + + /* wait while polling the status register */ + while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { + + if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + return (1); + } + } + + *addr = (FPW) 0x00FF00FF; /* restore read mode */ + + return (0); +} + +void inline spin_wheel (void) +{ + static int p = 0; + static char w[] = "\\/-"; + + printf ("\010%c", w[p]); + (++p == 3) ? (p = 0) : 0; +} diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c new file mode 100644 index 0000000000..eba010a804 --- /dev/null +++ b/board/omap1510inn/omap1510innovator.c @@ -0,0 +1,131 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, + * + * (C) Copyright 2003 + * Texas Instruments, + * Kshitij Gupta + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +static void flash__init (void); +static void ether__init (void); + +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + /* arch number of OMAP 1510-Board */ + gd->bd->bi_arch_number = 234; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x10000100; + +/* kk - this speeds up your boot a quite a bit. However to make it + * work, you need make sure your kernel startup flush bug is fixed. + * ... rkw ... + */ + icache_enable (); + + flash__init (); + ether__init (); + return 0; +} + + +int misc_init_r (void) +{ + /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ + /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ + + /* setup gpio direction to match board (no floats!) */ + /**gdir = 0xCFF9; */ + /**mdir = 0x103F; */ + + return (0); +} + +/****************************** + Routine: + Description: +******************************/ +static void flash__init (void) +{ +#define CS0_CHIP_SELECT_REG 0xfffecc10 +#define CS3_CHIP_SELECT_REG 0xfffecc1c +#define EMIFS_GlB_Config_REG 0xfffecc0c + + { + unsigned int regval; + + regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); + regval = regval | 0x0001; /* Turn off write protection for flash devices. */ + if (regval & 0x0002) { + regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ + /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ + /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ + /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ + } + *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; + } +} + + +/****************************** + Routine: + Description: +******************************/ +static void ether__init (void) +{ +#define ETH_CONTROL_REG 0x0800000b + /* take the Ethernet controller out of reset and wait + * for the EEPROM load to complete. + */ + *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; + udelay (3); +} + + +int dram_init (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} diff --git a/board/omap1510inn/platform.S b/board/omap1510inn/platform.S new file mode 100644 index 0000000000..6bad32d4bb --- /dev/null +++ b/board/omap1510inn/platform.S @@ -0,0 +1,386 @@ +/* + * Board specific setup info + * + * (C) Copyright 2003 + * Texas Instruments, + * + * -- Some bits of code used from rrload's head_OMAP1510.s -- + * Copyright (C) 2002 RidgeRun, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#if defined(CONFIG_OMAP1510) +#include <./configs/omap1510.h> +#endif + +#define OMAP1510_CLKS ((1< + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm925t/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + armboot_end_data = .; + + . = ALIGN(4); + .bss : { *(.bss) } + + armboot_end = .; +} diff --git a/cpu/arm925t/Makefile b/cpu/arm925t/Makefile new file mode 100644 index 0000000000..a1db818a8f --- /dev/null +++ b/cpu/arm925t/Makefile @@ -0,0 +1,43 @@ +# +# (C) Copyright 2000-2003 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(CPU).a + +START = start.o +OBJS = interrupts.o cpu.o omap925.o + +all: .depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(AR) crv $@ $(OBJS) + +######################################################################### + +.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/cpu/arm925t/config.mk b/cpu/arm925t/config.mk new file mode 100644 index 0000000000..cef7d26f1c --- /dev/null +++ b/cpu/arm925t/config.mk @@ -0,0 +1,27 @@ +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ + -mshort-load-bytes -msoft-float + +PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c new file mode 100644 index 0000000000..c55fbc7959 --- /dev/null +++ b/cpu/arm925t/cpu.c @@ -0,0 +1,159 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * CPU specific code + */ + +#include +#include +#include + +/* read co-processor 15, register #1 (control register) */ +static unsigned long read_p15_c1 (void) +{ + unsigned long value; + + __asm__ __volatile__( + "mrc p15, 0, %0, c1, c0, 0 @ read control reg\n" + : "=r" (value) + : + : "memory"); + +#ifdef MMU_DEBUG + printf ("p15/c1 is = %08lx\n", value); +#endif + return value; +} + +/* write to co-processor 15, register #1 (control register) */ +static void write_p15_c1 (unsigned long value) +{ +#ifdef MMU_DEBUG + printf ("write %08lx to p15/c1\n", value); +#endif + __asm__ __volatile__( + "mcr p15, 0, %0, c1, c0, 0 @ write it back\n" + : + : "r" (value) + : "memory"); + + read_p15_c1 (); +} + +static void cp_delay (void) +{ + volatile int i; + + /* Many OMAP regs need at least 2 nops */ + for (i = 0; i < 100; i++); +} + +/* See also ARM Ref. Man. */ +#define C1_MMU (1<<0) /* mmu off/on */ +#define C1_ALIGN (1<<1) /* alignment faults off/on */ +#define C1_DC (1<<2) /* dcache off/on */ +#define C1_WB (1<<3) /* merging write buffer on/off */ +#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */ +#define C1_SYS_PROT (1<<8) /* system protection */ +#define C1_ROM_PROT (1<<9) /* ROM protection */ +#define C1_IC (1<<12) /* icache off/on */ +#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */ +#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */ + +int cpu_init (void) +{ + /* + * setup up stack if necessary + */ +#ifdef CONFIG_USE_IRQ + IRQ_STACK_START = _armboot_end + + CONFIG_STACKSIZE + CONFIG_STACKSIZE_IRQ - 4; + FIQ_STACK_START = IRQ_STACK_START + CONFIG_STACKSIZE_FIQ; + _armboot_real_end = FIQ_STACK_START + 4; +#else + _armboot_real_end = _armboot_end + CONFIG_STACKSIZE; +#endif /* CONFIG_USE_IRQ */ + return (0); +} + +int cleanup_before_linux (void) +{ + /* + * this function is called just before we call linux + * it prepares the processor for linux + * + * we turn off caches etc ... + */ + + unsigned long i; + + disable_interrupts (); + + /* turn off I/D-cache */ + asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i)); + i &= ~(C1_DC | C1_IC); + asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i)); + + /* flush I/D-cache */ + i = 0; + asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i)); + return (0); +} + +int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + extern void reset_cpu (ulong addr); + + disable_interrupts (); + reset_cpu (0); + /*NOTREACHED*/ + return (0); +} + +void icache_enable (void) +{ + ulong reg; + + reg = read_p15_c1 (); /* get control reg. */ + cp_delay (); + write_p15_c1 (reg | C1_IC); +} + +void icache_disable (void) +{ + ulong reg; + + reg = read_p15_c1 (); + cp_delay (); + write_p15_c1 (reg & ~C1_IC); +} + +int icache_status (void) +{ + return (read_p15_c1 () & C1_IC) != 0; +} diff --git a/cpu/arm925t/interrupts.c b/cpu/arm925t/interrupts.c new file mode 100644 index 0000000000..ed8a1c7718 --- /dev/null +++ b/cpu/arm925t/interrupts.c @@ -0,0 +1,301 @@ +/* + * (C) Copyright 2003 + * Texas Instruments, + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Alex Zuepke + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +#include + +extern void reset_cpu(ulong addr); +#define TIMER_LOAD_VAL 0xffffffff + +/* macro to read the 32 bit timer */ +#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8)) + +#ifdef CONFIG_USE_IRQ +/* enable IRQ interrupts */ +void enable_interrupts (void) +{ + unsigned long temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "bic %0, %0, #0x80\n" + "msr cpsr_c, %0" + : "=r" (temp) + : + : "memory"); +} + + +/* + * disable IRQ/FIQ interrupts + * returns true if interrupts had been enabled before we disabled them + */ +int disable_interrupts (void) +{ + unsigned long old,temp; + __asm__ __volatile__("mrs %0, cpsr\n" + "orr %1, %0, #0xc0\n" + "msr cpsr_c, %1" + : "=r" (old), "=r" (temp) + : + : "memory"); + return (old & 0x80) == 0; +} +#else +void enable_interrupts (void) +{ + return; +} +int disable_interrupts (void) +{ + return 0; +} +#endif + + + +void bad_mode (void) +{ + panic ("Resetting CPU ...\n"); + reset_cpu (0); +} + +void show_regs (struct pt_regs *regs) +{ + unsigned long flags; + const char *processor_modes[] = { + "USER_26", "FIQ_26", "IRQ_26", "SVC_26", + "UK4_26", "UK5_26", "UK6_26", "UK7_26", + "UK8_26", "UK9_26", "UK10_26", "UK11_26", + "UK12_26", "UK13_26", "UK14_26", "UK15_26", + "USER_32", "FIQ_32", "IRQ_32", "SVC_32", + "UK4_32", "UK5_32", "UK6_32", "ABT_32", + "UK8_32", "UK9_32", "UK10_32", "UND_32", + "UK12_32", "UK13_32", "UK14_32", "SYS_32", + }; + + flags = condition_codes (regs); + + printf ("pc : [<%08lx>] lr : [<%08lx>]\n" + "sp : %08lx ip : %08lx fp : %08lx\n", + instruction_pointer (regs), + regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); + printf ("r10: %08lx r9 : %08lx r8 : %08lx\n", + regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); + printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", + regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); + printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n", + regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); + printf ("Flags: %c%c%c%c", + flags & CC_N_BIT ? 'N' : 'n', + flags & CC_Z_BIT ? 'Z' : 'z', + flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); + printf (" IRQs %s FIQs %s Mode %s%s\n", + interrupts_enabled (regs) ? "on" : "off", + fast_interrupts_enabled (regs) ? "on" : "off", + processor_modes[processor_mode (regs)], + thumb_mode (regs) ? " (T)" : ""); +} + +void do_undefined_instruction (struct pt_regs *pt_regs) +{ + printf ("undefined instruction\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_software_interrupt (struct pt_regs *pt_regs) +{ + printf ("software interrupt\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_prefetch_abort (struct pt_regs *pt_regs) +{ + printf ("prefetch abort\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_data_abort (struct pt_regs *pt_regs) +{ + printf ("data abort\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_not_used (struct pt_regs *pt_regs) +{ + printf ("not used\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_fiq (struct pt_regs *pt_regs) +{ + printf ("fast interrupt request\n"); + show_regs (pt_regs); + bad_mode (); +} + +void do_irq (struct pt_regs *pt_regs) +{ + printf ("interrupt request\n"); + show_regs (pt_regs); + bad_mode (); +} + +static ulong timestamp; +static ulong lastdec; + +/* nothing really to do with interrupts, just starts up a counter. */ +int interrupt_init (void) +{ + int32_t val; + + *((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL; + val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT); + *((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val; + return (0); +} + +/* + * timer without interrupts + */ + +void reset_timer (void) +{ + reset_timer_masked (); +} + +ulong get_timer (ulong base) +{ + return get_timer_masked () - base; +} + +void set_timer (ulong t) +{ + timestamp = t; +} + +/* very rough timer... */ +void udelay (unsigned long usec) +{ +#ifdef CONFIG_INNOVATOROMAP1510 +#define LOOPS_PER_MSEC 60 /* tuned on omap1510 */ + volatile int i, time_remaining = LOOPS_PER_MSEC * usec; + + for (i = time_remaining; i > 0; i--) { + } +#else + + ulong tmo; + + tmo = usec / 1000; + tmo *= CFG_HZ; + tmo /= 1000; + + tmo += get_timer (0); + + while (get_timer_masked () < tmo) + /*NOP*/; +#endif +} + +void reset_timer_masked (void) +{ + /* reset time */ + lastdec = READ_TIMER; + timestamp = 0; +} + +ulong get_timer_masked (void) +{ + ulong now = READ_TIMER; /* current tick value */ + + if (lastdec >= now) { /* did I roll (rem decrementer) */ + /* normal mode */ + timestamp += lastdec - now; /* record amount of time since last check */ + } else { + /* we have an overflow ... */ + timestamp += lastdec + TIMER_LOAD_VAL - now; + } + lastdec = now; + + return timestamp; +} + +void udelay_masked (unsigned long usec) +{ +#ifdef CONFIG_INNOVATOROMAP1510 + #define LOOPS_PER_MSEC 60 /* tuned on omap1510 */ + volatile int i, time_remaining = LOOPS_PER_MSEC*usec; + for (i=time_remaining; i>0; i--) { } +#else + + ulong tmo; + + tmo = usec / 1000; + tmo *= CFG_HZ; + tmo /= 1000; + + reset_timer_masked (); + + while (get_timer_masked () < tmo) + /*NOP*/; +#endif +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{ /* poor timer, may need to improve especiall for bootp. */ + ulong tbclk; + + tbclk = CFG_HZ; + return tbclk; +} diff --git a/cpu/arm925t/omap925.c b/cpu/arm925t/omap925.c new file mode 100644 index 0000000000..1166ca695f --- /dev/null +++ b/cpu/arm925t/omap925.c @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2003 + * Texas Instruments + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +ushort gpioreserved; + +void gpioreserve(ushort mask) +{ + gpioreserved |= mask; +} + +void gpiosetdir(ushort mask, ushort in) +{ + *(ushort *)GPIO_DIR_CONTROL_REG = (*(ushort *)GPIO_DIR_CONTROL_REG & ~mask) | (in & mask); +} + + +void gpiosetout(ushort mask, ushort out) +{ + ushort *r_ptr, r_val; + + r_ptr = (ushort *)GPIO_DATA_OUTPUT_REG; /* set pointer */ + r_val = *r_ptr & ~mask; /* get previous val, clear bits we want to change */ + r_val |= (out & mask); /* set specified bits in value + plus origional ones */ + *r_ptr = r_val; /* write it out */ +/* + * gcc screwed this one up :(. + * + * *(ushort *)GPIO_DATA_OUTPUT_REG = (*(ushort *)GPIO_DATA_OUTPUT_REG & ~mask) | (out & mask); + */ + +} + +void gpioinit(void) +{ +} + + +#define MIF_CONFIG_REG 0xFFFECC0C +#define FLASH_GLOBAL_CTRL_NWP 1 + +void archflashwp (void *archdata, int wp) +{ + ulong *fgc = (ulong *) MIF_CONFIG_REG; + + if (wp == 1) + *fgc &= ~FLASH_GLOBAL_CTRL_NWP; + else + *fgc |= FLASH_GLOBAL_CTRL_NWP; +} diff --git a/cpu/arm925t/start.S b/cpu/arm925t/start.S new file mode 100644 index 0000000000..2115fb30e9 --- /dev/null +++ b/cpu/arm925t/start.S @@ -0,0 +1,424 @@ +/* + * armboot - Startup Code for ARM925 CPU-core + * + * Copyright (c) 2003 Texas Instruments + * + * ----- Adapted for OMAP1510 from ARM920 code ------ + * + * Copyright (c) 2001 Marius Gröger + * Copyright (c) 2002 Alex Züpke + * Copyright (c) 2002 Gary Jennejohn + * Copyright (c) 2003 Richard Woodruff + * Copyright (c) 2003 Kshitij + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + + +#include +#include + +#if defined(CONFIG_OMAP1510) +#include <./configs/omap1510.h> +#endif + +/* + ************************************************************************* + * + * Jump vector table as in table 3.1 in [1] + * + ************************************************************************* + */ + + +.globl _start +_start: b reset + ldr pc, _undefined_instruction + ldr pc, _software_interrupt + ldr pc, _prefetch_abort + ldr pc, _data_abort + ldr pc, _not_used + ldr pc, _irq + ldr pc, _fiq + +_undefined_instruction: .word undefined_instruction +_software_interrupt: .word software_interrupt +_prefetch_abort: .word prefetch_abort +_data_abort: .word data_abort +_not_used: .word not_used +_irq: .word irq +_fiq: .word fiq + + .balignl 16,0xdeadbeef + + +/* + ************************************************************************* + * + * Startup Code (reset vector) + * + * do important init only if we don't start from memory! + * setup Memory and board specific bits prior to relocation. + * relocate armboot to ram + * setup stack + * + ************************************************************************* + */ + +/* + * CFG_MEM_END is in the board dependent config-file (configs/config_BOARD.h) + */ +_TEXT_BASE: + .word TEXT_BASE + +.globl _armboot_start +_armboot_start: + .word _start + +/* + * Note: _armboot_end_data and _armboot_end are defined + * by the (board-dependent) linker script. + * _armboot_end_data is the first usable FLASH address after armboot + */ +.globl _armboot_end_data +_armboot_end_data: + .word armboot_end_data +.globl _armboot_end +_armboot_end: + .word armboot_end + +/* + * _armboot_real_end is the first usable RAM address behind armboot + * and the various stacks + */ +.globl _armboot_real_end +_armboot_real_end: + .word 0x0badc0de + +#ifdef CONFIG_USE_IRQ +/* IRQ stack memory (calculated at run-time) */ +.globl IRQ_STACK_START +IRQ_STACK_START: + .word 0x0badc0de + +/* IRQ stack memory (calculated at run-time) */ +.globl FIQ_STACK_START +FIQ_STACK_START: + .word 0x0badc0de +#endif + + +/* + * the actual reset code + */ + +reset: + /* + * set the cpu to SVC32 mode + */ + mrs r0,cpsr + bic r0,r0,#0x1f + orr r0,r0,#0xd3 + msr cpsr,r0 + + /* + * Set up 925T mode + */ + mov r1, #0x81 /* Set ARM925T configuration. */ + mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */ + + /* + * turn off the watchdog, unlock/diable sequence + */ + mov r1, #0xF5 + ldr r0, =WDTIM_MODE + strh r1, [r0] + mov r1, #0xA0 + strh r1, [r0] + + /* + * mask all IRQs by setting all bits in the INTMR - default + */ + mov r1, #0xffffffff + ldr r0, =REG_IHL1_MIR + str r1, [r0] + ldr r0, =REG_IHL2_MIR + str r1, [r0] + + /* + * wait for dpll to lock + */ + ldr r0, =CK_DPLL1 + mov r1, #0x10 + strh r1, [r0] +poll1: + ldrh r1, [r0] + ands r1, r1, #0x01 + beq poll1 + bl cpu_init_crit + +relocate: + /* + * relocate armboot to RAM + */ + adr r0, _start /* r0 <- current position of code */ + ldr r2, _armboot_start + ldr r3, _armboot_end + sub r2, r3, r2 /* r2 <- size of armboot */ + ldr r1, _TEXT_BASE /* r1 <- destination address */ + add r2, r0, r2 /* r2 <- source end address */ + + /* + * r0 = source address + * r1 = target address + * r2 = source end address + */ +copy_loop: + ldmia r0!, {r3-r10} + stmia r1!, {r3-r10} + cmp r0, r2 + ble copy_loop + + /* set up the stack */ + ldr r0, _armboot_end + add r0, r0, #CONFIG_STACKSIZE + sub sp, r0, #12 /* leave 3 words for abort-stack */ + + ldr pc, _start_armboot + +_start_armboot: .word start_armboot + + +/* + ************************************************************************* + * + * CPU_init_critical registers + * + * setup important registers + * setup memory timing + * + ************************************************************************* + */ + + +cpu_init_crit: + /* + * flush v4 I/D caches + */ + mov r0, #0 + mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */ + mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */ + + /* + * disable MMU stuff and caches + */ + mrc p15, 0, r0, c1, c0, 0 + bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS) + bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM) + orr r0, r0, #0x00000002 @ set bit 2 (A) Align + orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache + mcr p15, 0, r0, c1, c0, 0 + + /* + * Go setup Memory and board specific bits prior to relocation. + */ + mov ip, lr /* perserve link reg across call */ + bl platformsetup /* go setup pll,mux,memory */ + mov lr, ip /* restore link */ + mov pc, lr /* back to my caller */ +/* + ************************************************************************* + * + * Interrupt handling + * + ************************************************************************* + */ + +@ +@ IRQ stack frame. +@ +#define S_FRAME_SIZE 72 + +#define S_OLD_R0 68 +#define S_PSR 64 +#define S_PC 60 +#define S_LR 56 +#define S_SP 52 + +#define S_IP 48 +#define S_FP 44 +#define S_R10 40 +#define S_R9 36 +#define S_R8 32 +#define S_R7 28 +#define S_R6 24 +#define S_R5 20 +#define S_R4 16 +#define S_R3 12 +#define S_R2 8 +#define S_R1 4 +#define S_R0 0 + +#define MODE_SVC 0x13 +#define I_BIT 0x80 + +/* + * use bad_save_user_regs for abort/prefetch/undef/swi ... + * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling + */ + + .macro bad_save_user_regs + sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack + stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12 + + ldr r2, _armboot_end @ find top of stack + add r2, r2, #CONFIG_STACKSIZE @ find base of normal stack + sub r2, r2, #8 @ set base 2 words into abort stack + ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs) + add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack + + add r5, sp, #S_SP + mov r1, lr + stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr + mov r0, sp @ save current stack into r0 (param register) + .endm + + .macro irq_save_user_regs + sub sp, sp, #S_FRAME_SIZE + stmia sp, {r0 - r12} @ Calling r0-r12 + add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good. + stmdb r8, {sp, lr}^ @ Calling SP, LR + str lr, [r8, #0] @ Save calling PC + mrs r6, spsr + str r6, [r8, #4] @ Save CPSR + str r0, [r8, #8] @ Save OLD_R0 + mov r0, sp + .endm + + .macro irq_restore_user_regs + ldmia sp, {r0 - lr}^ @ Calling r0 - lr + mov r0, r0 + ldr lr, [sp, #S_PC] @ Get PC + add sp, sp, #S_FRAME_SIZE + subs pc, lr, #4 @ return & move spsr_svc into cpsr + .endm + + .macro get_bad_stack + ldr r13, _armboot_end @ get bottom of stack (into sp by by user stack pointer). + add r13, r13, #CONFIG_STACKSIZE @ head to reserved words at the top of the stack + sub r13, r13, #8 @ reserved a couple spots in abort stack + + str lr, [r13] @ save caller lr in position 0 of saved stack + mrs lr, spsr @ get the spsr + str lr, [r13, #4] @ save spsr in position 1 of saved stack + + mov r13, #MODE_SVC @ prepare SVC-Mode + @ msr spsr_c, r13 + msr spsr, r13 @ switch modes, make sure moves will execute + mov lr, pc @ capture return pc + movs pc, lr @ jump to next instruction & switch modes. + .endm + + .macro get_irq_stack @ setup IRQ stack + ldr sp, IRQ_STACK_START + .endm + + .macro get_fiq_stack @ setup FIQ stack + ldr sp, FIQ_STACK_START + .endm + +/* + * exception handlers + */ + .align 5 +undefined_instruction: + get_bad_stack + bad_save_user_regs + bl do_undefined_instruction + + .align 5 +software_interrupt: + get_bad_stack + bad_save_user_regs + bl do_software_interrupt + + .align 5 +prefetch_abort: + get_bad_stack + bad_save_user_regs + bl do_prefetch_abort + + .align 5 +data_abort: + get_bad_stack + bad_save_user_regs + bl do_data_abort + + .align 5 +not_used: + get_bad_stack + bad_save_user_regs + bl do_not_used + +#ifdef CONFIG_USE_IRQ + + .align 5 +irq: + get_irq_stack + irq_save_user_regs + bl do_irq + irq_restore_user_regs + + .align 5 +fiq: + get_fiq_stack + /* someone ought to write a more effiction fiq_save_user_regs */ + irq_save_user_regs + bl do_fiq + irq_restore_user_regs + +#else + + .align 5 +irq: + get_bad_stack + bad_save_user_regs + bl do_irq + + .align 5 +fiq: + get_bad_stack + bad_save_user_regs + bl do_fiq + +#endif + + .align 5 +.globl reset_cpu +reset_cpu: + ldr r1, rstctl1 /* get clkm1 reset ctl */ + mov r3, #0x0 + strh r3, [r1] /* clear it */ + mov r3, #0x8 + strh r3, [r1] /* force dsp+arm reset */ +_loop_forever: + b _loop_forever +rstctl1: + .word 0xfffece10 diff --git a/drivers/ns16550.c b/drivers/ns16550.c index 6f818d774b..9344a0a645 100644 --- a/drivers/ns16550.c +++ b/drivers/ns16550.c @@ -17,12 +17,19 @@ void NS16550_init (NS16550_t com_port, int baud_divisor) { com_port->ier = 0x00; +#ifdef CONFIG_OMAP1510 + com_port->mdr1 = 0x7; /* mode select reset TL16C750*/ +#endif com_port->lcr = LCR_BKSE | LCRVAL; com_port->dll = baud_divisor & 0xff; com_port->dlm = (baud_divisor >> 8) & 0xff; com_port->lcr = LCRVAL; com_port->mcr = MCRVAL; com_port->fcr = FCRVAL; +#ifdef CONFIG_OMAP1510 + com_port->mdr1 = 0; /* select uart mode */ +#endif + } void NS16550_reinit (NS16550_t com_port, int baud_divisor) diff --git a/drivers/serial.c b/drivers/serial.c index 36d0e6e1f6..f28ad803c1 100644 --- a/drivers/serial.c +++ b/drivers/serial.c @@ -42,12 +42,22 @@ static NS16550_t console = (NS16550_t) CFG_NS16550_COM4; #error no valid console defined #endif -int serial_init (void) +static int calc_divisor (void) { DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_OMAP1510 + /* If can't cleanly clock 115200 set div to 1 */ + if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) { + console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */ + return (1); /* return 1 for base divisor */ + } +#endif + return (CFG_NS16550_CLK / 16 / gd->baudrate); +} - int clock_divisor = (CFG_NS16550_CLK + gd->baudrate * 8 ) - / (gd->baudrate * 16); +int serial_init (void) +{ + int clock_divisor = calc_divisor(); #ifdef CFG_NS87308 initialise_ns87308(); @@ -91,10 +101,9 @@ serial_tstc(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor; + clock_divisor = calc_divisor(); NS16550_reinit(console, clock_divisor); } diff --git a/include/arm925t.h b/include/arm925t.h new file mode 100644 index 0000000000..ab343eaace --- /dev/null +++ b/include/arm925t.h @@ -0,0 +1,15 @@ +/************************************************ + * NAME : arm925t.h + * Version : 23 June 2003 * + ************************************************/ + +#ifndef __ARM925T_H__ +#define __ARM925T_H__ + +void gpioreserve(ushort mask); +void gpiosetdir(ushort mask, ushort in); +void gpiosetout(ushort mask, ushort out); +void gpioinit(void); +void archflashwp(void *archdata, int wp); + +#endif /*__ARM925T_H__*/ diff --git a/include/asm-arm/arch-arm925t/sizes.h b/include/asm-arm/arch-arm925t/sizes.h new file mode 100644 index 0000000000..7319bd9227 --- /dev/null +++ b/include/asm-arm/arch-arm925t/sizes.h @@ -0,0 +1,50 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif /* __sizes_h */ diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h index d427d80adb..717ba358cd 100644 --- a/include/configs/lwmon.h +++ b/include/configs/lwmon.h @@ -220,6 +220,19 @@ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } #endif +/*----------------------------------------------------------------------*/ +#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */ +#undef CONFIG_MODEM_SUPPORT_DEBUG + +#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* press F3 + F6 keys to enable modem */ +#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ +#if 0 +#define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n" +#define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */ +#endif +/*----------------------------------------------------------------------*/ + /* * Low Level Configuration Settings * (address mappings, register initial values, etc.) @@ -576,9 +589,4 @@ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_WARM 0x02 /* Software reboot */ -#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */ -#undef CONFIG_MODEM_SUPPORT_DEBUG - -#define CONFIG_MODEM_KEY_MAGIC "3C+3F" /* press F3 + F6 keys to enable modem */ -#define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */ #endif /* __CONFIG_H */ diff --git a/include/configs/omap1510.h b/include/configs/omap1510.h new file mode 100644 index 0000000000..001e21aea9 --- /dev/null +++ b/include/configs/omap1510.h @@ -0,0 +1,687 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * OMAP hardware map + * + * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com) + * Author: RidgeRun, Inc. + * Greg Lonnon (glonnon@ridgerun.com) or info@ridgerun.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include + +/* + There are 2 sets of general I/O --> + 1. GPIO (shared between ARM & DSP, configured by ARM) + 2. MPUIO which can be used only by the ARM. + + Base address FFFB:5000 is where the ARM accesses the MPUIO control registers + (see 7.2.2 of the TRM for MPUIO reg definitions). + + Base address E101:5000 is reserved for ARM access of the same MPUIO control + regs, but via the DSP I/O map. This address is unavailable on 1510. + + Base address FFFC:E000 is where the ARM accesses the GPIO config registers + directly via its own peripheral bus. + + Base address E101:E000 is where the ARM can access the same GPIO config + registers, but the access takes place through the ARM port interface (called + API or MPUI) via the DSP's peripheral bus (DSP I/O space). + + Therefore, the ARM should setup the GPIO regs thru the FFFC:E000 addresses + instead of the E101:E000 addresses. The DSP has only read access of the pin + control register, so this may explain the inability to write to E101:E018. + Try accessing pin control reg at FFFC:E018. + */ +#define OMAP1510_GPIO_BASE 0xfffce000 +#define OMAP1510_GPIO_START OMAP1510_GPIO_BASE +#define OMAP1510_GPIO_SIZE SZ_4K + +#define OMAP1510_MCBSP1_BASE 0xE1011000 +#define OMAP1510_MCBSP1_SIZE SZ_4K +#define OMAP1510_MCBSP1_START 0xE1011000 + +#define OMAP1510_MCBSP2_BASE 0xFFFB1000 + +#define OMAP1510_MCBSP3_BASE 0xE1017000 +#define OMAP1510_MCBSP3_SIZE SZ_4K +#define OMAP1510_MCBSP3_START 0xE1017000 + +/* + * Where's the flush address (for flushing D and I cache?) + */ +#define FLUSH_BASE 0xdf000000 +#define FLUSH_BASE_PHYS 0x00000000 + +#ifndef __ASSEMBLER__ + +#define PCIO_BASE 0 + +/* + * RAM definitions + */ +#define MAPTOPHYS(a) ((unsigned long)(a) - PAGE_OFFSET) +#define KERNTOPHYS(a) ((unsigned long)(&a)) +#define KERNEL_BASE (0x10008000) +#endif + +/* macro to get at IO space when running virtually */ +#define IO_ADDRESS(x) ((x)) + +/* ---------------------------------------------------------------------------- + * OMAP1510 system registers + * ---------------------------------------------------------------------------- + */ + +#define OMAP1510_UART1_BASE 0xfffb0000 /* "BLUETOOTH-UART" */ +#define OMAP1510_UART2_BASE 0xfffb0800 /* "MODEM-UART" */ +#define OMAP1510_RTC_BASE 0xfffb4800 /* RTC */ +#define OMAP1510_UART3_BASE 0xfffb9800 /* Shared MPU/DSP UART */ +#define OMAP1510_COM_MCBSP2_BASE 0xffff1000 /* Com McBSP2 */ +#define OMAP1510_AUDIO_MCBSP_BASE 0xffff1800 /* Audio McBSP2 */ +#define OMAP1510_ARMIO_BASE 0xfffb5000 /* keyboard/gpio */ + +/* + * OMAP1510 UART3 Registers + */ + +#define OMAP_MPU_UART3_BASE 0xFFFB9800 /* UART3 through MPU bus */ + +/* UART3 Registers Maping through MPU bus */ + +#define UART3_RHR (OMAP_MPU_UART3_BASE + 0) +#define UART3_THR (OMAP_MPU_UART3_BASE + 0) +#define UART3_DLL (OMAP_MPU_UART3_BASE + 0) +#define UART3_IER (OMAP_MPU_UART3_BASE + 4) +#define UART3_DLH (OMAP_MPU_UART3_BASE + 4) +#define UART3_IIR (OMAP_MPU_UART3_BASE + 8) +#define UART3_FCR (OMAP_MPU_UART3_BASE + 8) +#define UART3_EFR (OMAP_MPU_UART3_BASE + 8) +#define UART3_LCR (OMAP_MPU_UART3_BASE + 0x0C) +#define UART3_MCR (OMAP_MPU_UART3_BASE + 0x10) +#define UART3_XON1_ADDR1 (OMAP_MPU_UART3_BASE + 0x10) +#define UART3_XON2_ADDR2 (OMAP_MPU_UART3_BASE + 0x14) +#define UART3_LSR (OMAP_MPU_UART3_BASE + 0x14) +#define UART3_TCR (OMAP_MPU_UART3_BASE + 0x18) +#define UART3_MSR (OMAP_MPU_UART3_BASE + 0x18) +#define UART3_XOFF1 (OMAP_MPU_UART3_BASE + 0x18) +#define UART3_XOFF2 (OMAP_MPU_UART3_BASE + 0x1C) +#define UART3_SPR (OMAP_MPU_UART3_BASE + 0x1C) +#define UART3_TLR (OMAP_MPU_UART3_BASE + 0x1C) +#define UART3_MDR1 (OMAP_MPU_UART3_BASE + 0x20) +#define UART3_MDR2 (OMAP_MPU_UART3_BASE + 0x24) +#define UART3_SFLSR (OMAP_MPU_UART3_BASE + 0x28) +#define UART3_TXFLL (OMAP_MPU_UART3_BASE + 0x28) +#define UART3_RESUME (OMAP_MPU_UART3_BASE + 0x2C) +#define UART3_TXFLH (OMAP_MPU_UART3_BASE + 0x2C) +#define UART3_SFREGL (OMAP_MPU_UART3_BASE + 0x30) +#define UART3_RXFLL (OMAP_MPU_UART3_BASE + 0x30) +#define UART3_SFREGH (OMAP_MPU_UART3_BASE + 0x34) +#define UART3_RXFLH (OMAP_MPU_UART3_BASE + 0x34) +#define UART3_BLR (OMAP_MPU_UART3_BASE + 0x38) +#define UART3_ACREG (OMAP_MPU_UART3_BASE + 0x3C) +#define UART3_DIV16 (OMAP_MPU_UART3_BASE + 0x3C) +#define UART3_SCR (OMAP_MPU_UART3_BASE + 0x40) +#define UART3_SSR (OMAP_MPU_UART3_BASE + 0x44) +#define UART3_EBLR (OMAP_MPU_UART3_BASE + 0x48) +#define UART3_OSC_12M_SEL (OMAP_MPU_UART3_BASE + 0x4C) +#define UART3_MVR (OMAP_MPU_UART3_BASE + 0x50) + +/* + * Configuration Registers + */ +#define FUNC_MUX_CTRL_0 0xfffe1000 +#define FUNC_MUX_CTRL_1 0xfffe1004 +#define FUNC_MUX_CTRL_2 0xfffe1008 +#define COMP_MODE_CTRL_0 0xfffe100c +#define FUNC_MUX_CTRL_3 0xfffe1010 +#define FUNC_MUX_CTRL_4 0xfffe1014 +#define FUNC_MUX_CTRL_5 0xfffe1018 +#define FUNC_MUX_CTRL_6 0xfffe101C +#define FUNC_MUX_CTRL_7 0xfffe1020 +#define FUNC_MUX_CTRL_8 0xfffe1024 +#define FUNC_MUX_CTRL_9 0xfffe1028 +#define FUNC_MUX_CTRL_A 0xfffe102C +#define FUNC_MUX_CTRL_B 0xfffe1030 +#define FUNC_MUX_CTRL_C 0xfffe1034 +#define FUNC_MUX_CTRL_D 0xfffe1038 +#define PULL_DWN_CTRL_0 0xfffe1040 +#define PULL_DWN_CTRL_1 0xfffe1044 +#define PULL_DWN_CTRL_2 0xfffe1048 +#define PULL_DWN_CTRL_3 0xfffe104c +#define GATE_INH_CTRL_0 0xfffe1050 +#define VOLTAGE_CTRL_0 0xfffe1060 +#define TEST_DBG_CTRL_0 0xfffe1070 + +#define MOD_CONF_CTRL_0 0xfffe1080 + +/* + * Traffic Controller Memory Interface Registers + */ +#define TCMIF_BASE 0xfffecc00 +#define IMIF_PRIO (TCMIF_BASE + 0x00) +#define EMIFS_PRIO_REG (TCMIF_BASE + 0x04) +#define EMIFF_PRIO_REG (TCMIF_BASE + 0x08) +#define EMIFS_CONFIG_REG (TCMIF_BASE + 0x0c) +#define EMIFS_CS0_CONFIG (TCMIF_BASE + 0x10) +#define EMIFS_CS1_CONFIG (TCMIF_BASE + 0x14) +#define EMIFS_CS2_CONFIG (TCMIF_BASE + 0x18) +#define EMIFS_CS3_CONFIG (TCMIF_BASE + 0x1c) +#define EMIFF_SDRAM_CONFIG (TCMIF_BASE + 0x20) +#define EMIFF_MRS (TCMIF_BASE + 0x24) +#define TC_TIMEOUT1 (TCMIF_BASE + 0x28) +#define TC_TIMEOUT2 (TCMIF_BASE + 0x2c) +#define TC_TIMEOUT3 (TCMIF_BASE + 0x30) +#define TC_ENDIANISM (TCMIF_BASE + 0x34) +#define EMIFF_SDRAM_CONFIG_2 (TCMIF_BASE + 0x3c) +#define EMIF_CFG_DYNAMIC_WS (TCMIF_BASE + 0x40) + +/* + * LCD Panel + */ +#define TI925_LCD_BASE 0xFFFEC000 +#define TI925_LCD_CONTROL (TI925_LCD_BASE) +#define TI925_LCD_TIMING0 (TI925_LCD_BASE+0x4) +#define TI925_LCD_TIMING1 (TI925_LCD_BASE+0x8) +#define TI925_LCD_TIMING2 (TI925_LCD_BASE+0xc) +#define TI925_LCD_STATUS (TI925_LCD_BASE+0x10) +#define TI925_LCD_SUBPANEL (TI925_LCD_BASE+0x14) + +#define OMAP_LCD_CONTROL TI925_LCD_CONTROL + +/* + * MMC/SD Host Controller Registers + */ + +#define OMAP_MMC_CMD 0xFFFB7800 /* MMC Command */ +#define OMAP_MMC_ARGL 0xFFFB7804 /* MMC argument low */ +#define OMAP_MMC_ARGH 0xFFFB7808 /* MMC argument high */ +#define OMAP_MMC_CON 0xFFFB780C /* MMC system configuration */ +#define OMAP_MMC_STAT 0xFFFB7810 /* MMC status */ +#define OMAP_MMC_IE 0xFFFB7814 /* MMC system interrupt enable */ +#define OMAP_MMC_CTO 0xFFFB7818 /* MMC command time-out */ +#define OMAP_MMC_DTO 0xFFFB781C /* MMC data time-out */ +#define OMAP_MMC_DATA 0xFFFB7820 /* MMC TX/RX FIFO data */ +#define OMAP_MMC_BLEN 0xFFFB7824 /* MMC block length */ +#define OMAP_MMC_NBLK 0xFFFB7828 /* MMC number of blocks */ +#define OMAP_MMC_BUF 0xFFFB782C /* MMC buffer configuration */ +#define OMAP_MMC_SPI 0xFFFB7830 /* MMC serial port interface */ +#define OMAP_MMC_SDIO 0xFFFB7834 /* MMC SDIO mode configuration */ +#define OMAP_MMC_SYST 0xFFFB7838 /* MMC system test */ +#define OMAP_MMC_REV 0xFFFB783C /* MMC module version */ +#define OMAP_MMC_RSP0 0xFFFB7840 /* MMC command response 0 */ +#define OMAP_MMC_RSP1 0xFFFB7844 /* MMC command response 1 */ +#define OMAP_MMC_RSP2 0xFFFB7848 /* MMC command response 2 */ +#define OMAP_MMC_RSP3 0xFFFB784C /* MMC command response 3 */ +#define OMAP_MMC_RSP4 0xFFFB7850 /* MMC command response 4 */ +#define OMAP_MMC_RSP5 0xFFFB7854 /* MMC command response 5 */ +#define OMAP_MMC_RSP6 0xFFFB7858 /* MMC command response 6 */ +#define OMAP_MMC_RSP7 0xFFFB785C /* MMC command response 4 */ + +/* MMC masks */ + +#define OMAP_MMC_END_OF_CMD (1 << 0) /* End of command phase */ +#define OMAP_MMC_CARD_BUSY (1 << 2) /* Card enter busy state */ +#define OMAP_MMC_BLOCK_RS (1 << 3) /* Block received/sent */ +#define OMAP_MMC_EOF_BUSY (1 << 4) /* Card exit busy state */ +#define OMAP_MMC_DATA_TIMEOUT (1 << 5) /* Data response time-out */ +#define OMAP_MMC_DATA_CRC (1 << 6) /* Date CRC error */ +#define OMAP_MMC_CMD_TIMEOUT (1 << 7) /* Command response time-out */ +#define OMAP_MMC_CMD_CRC (1 << 8) /* Command CRC error */ +#define OMAP_MMC_A_FULL (1 << 10) /* Buffer almost full */ +#define OMAP_MMC_A_EMPTY (1 << 11) /* Buffer almost empty */ +#define OMAP_MMC_OCR_BUSY (1 << 12) /* OCR busy */ +#define OMAP_MMC_CARD_IRQ (1 << 13) /* Card IRQ received */ +#define OMAP_MMC_CARD_ERR (1 << 14) /* Card status error in response */ + +/* 2.9.2 MPUI Interface Registers FFFE:C900 */ + +#define MPUI_CTRL_REG (volatile __u32 *)(0xfffec900) +#define MPUI_DEBUG_ADDR (volatile __u32 *)(0xfffec904) +#define MPUI_DEBUG_DATA (volatile __u32 *)(0xfffec908) +#define MPUI_DEBUG_FLAG (volatile __u16 *)(0xfffec90c) +#define MPUI_STATUS_REG (volatile __u16 *)(0xfffec910) +#define MPUI_DSP_STATUS_REG (volatile __u16 *)(0xfffec914) +#define MPUI_DSP_BOOT_CONFIG (volatile __u16 *)(0xfffec918) +#define MPUI_DSP_API_CONFIG (volatile __u16 *)(0xfffec91c) + +/* 2.9.6 Traffic Controller Memory Interface Registers: */ +#define OMAP_IMIF_PRIO_REG 0xfffecc00 +#define OMAP_EMIFS_PRIO_REG 0xfffecc04 +#define OMAP_EMIFF_PRIO_REG 0xfffecc08 +#define OMAP_EMIFS_CONFIG_REG 0xfffecc0c +#define OMAP_EMIFS_CS0_CONFIG 0xfffecc10 +#define OMAP_EMIFS_CS1_CONFIG 0xfffecc14 +#define OMAP_EMIFS_CS2_CONFIG 0xfffecc18 +#define OMAP_EMIFS_CS3_CONFIG 0xfffecc1c +#define OMAP_EMIFF_SDRAM_CONFIG 0xfffecc20 +#define OMAP_EMIFF_MRS 0xfffecc24 +#define OMAP_TIMEOUT1 0xfffecc28 +#define OMAP_TIMEOUT2 0xfffecc2c +#define OMAP_TIMEOUT3 0xfffecc30 +#define OMAP_ENDIANISM 0xfffecc34 + +/* 2.9.10 EMIF Slow Interface Configuration Register (EMIFS_CONFIG_REG): */ +#define OMAP_EMIFS_CONFIG_FR (1 << 4) +#define OMAP_EMIFS_CONFIG_PDE (1 << 3) +#define OMAP_EMIFS_CONFIG_PWD_EN (1 << 2) +#define OMAP_EMIFS_CONFIG_BM (1 << 1) +#define OMAP_EMIFS_CONFIG_WP (1 << 0) + +/* + * Memory chunk set aside for the Framebuffer in SRAM + */ +#define SRAM_FRAMEBUFFER_MEMORY OMAP1510_SRAM_BASE + + +/* + * DMA + */ + +#define OMAP1510_DMA_BASE 0xFFFED800 +#define OMAP_DMA_BASE OMAP1510_DMA_BASE + +/* Global Register selection */ +#define NO_GLOBAL_DMA_ACCESS 0 + +/* Channel select field + * NOTE: all other channels are linear, chan0 is 0, chan1 is 1, etc... + */ +#define LCD_CHANNEL 0xc + +/* Register Select Field (LCD) */ +#define DMA_LCD_CTRL 0 +#define DMA_LCD_TOP_F1_L 1 +#define DMA_LCD_TOP_F1_U 2 +#define DMA_LCD_BOT_F1_L 3 +#define DMA_LCD_BOT_F1_U 4 + +#define LCD_FRAME_MODE (1<<0) +#define LCD_FRAME_IT_IE (1<<1) +#define LCD_BUS_ERROR_IT_IE (1<<2) +#define LCD_FRAME_1_IT_COND (1<<3) +#define LCD_FRAME_2_IT_COND (1<<4) +#define LCD_BUS_ERROR_IT_COND (1<<5) +#define LCD_SOURCE_IMIF (1<<6) + +/* + * Real-Time Clock + */ + +#define RTC_SECONDS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x00) +#define RTC_MINUTES (volatile __u8 *)(OMAP1510_RTC_BASE + 0x04) +#define RTC_HOURS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x08) +#define RTC_DAYS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x0C) +#define RTC_MONTHS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x10) +#define RTC_YEARS (volatile __u8 *)(OMAP1510_RTC_BASE + 0x14) +#define RTC_CTRL (volatile __u8 *)(OMAP1510_RTC_BASE + 0x40) + + +/* --------------------------------------------------------------------------- + * OMAP1510 Interrupt Handlers + * --------------------------------------------------------------------------- + * + */ +#define OMAP_IH1_BASE 0xfffecb00 +#define OMAP_IH2_BASE 0xfffe0000 +#define OMAP1510_ITR 0x0 +#define OMAP1510_MASK 0x4 + +#define INTERRUPT_HANDLER_BASE OMAP_IH1_BASE +#define INTERRUPT_INPUT_REGISTER OMAP1510_ITR +#define INTERRUPT_MASK_REGISTER OMAP1510_MASK + + +/* --------------------------------------------------------------------------- + * OMAP1510 TIMERS + * --------------------------------------------------------------------------- + * + */ + +#define OMAP1510_32kHz_TIMER_BASE 0xfffb9000 + +/* 32k Timer Registers */ +#define TIMER32k_CR 0x08 +#define TIMER32k_TVR 0x00 +#define TIMER32k_TCR 0x04 + +/* 32k Timer Control Register definition */ +#define TIMER32k_TSS (1<<0) +#define TIMER32k_TRB (1<<1) +#define TIMER32k_INT (1<<2) +#define TIMER32k_ARL (1<<3) + +/* MPU Timer base addresses */ +#define OMAP1510_MPUTIMER_BASE 0xfffec500 +#define OMAP1510_MPUTIMER_OFF 0x00000100 + +#define OMAP1510_TIMER1_BASE 0xfffec500 +#define OMAP1510_TIMER2_BASE 0xfffec600 +#define OMAP1510_TIMER3_BASE 0xfffec700 + +/* MPU Timer Registers */ +#define CNTL_TIMER 0 +#define LOAD_TIM 4 +#define READ_TIM 8 + +/* CNTL_TIMER register bits */ +#define MPUTIM_FREE (1<<6) +#define MPUTIM_CLOCK_ENABLE (1<<5) +#define MPUTIM_PTV_MASK (0x7< + * Configuation settings for the TI OMAP Innovator board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ +#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ +#define CONFIG_OMAP 1 /* in a TI OMAP core */ +#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */ +#define CONFIG_INNOVATOROMAP1510 1 /* a Innovator Board */ + +/* input clock of PLL */ +#define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */ + +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#define CONFIG_MISC_INIT_R + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 + +/* + * Size of malloc() pool + */ +#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) + +/* + * Hardware drivers + */ +/* +#define CONFIG_DRIVER_SMC9196 +#define CONFIG_SMC9196_BASE 0x08000300 +#define CONFIG_SMC9196_EXT_PHY +*/ +#define CONFIG_DRIVER_LAN91C96 +#define CONFIG_LAN91C96_BASE 0x08000300 +#define CONFIG_LAN91C96_EXT_PHY + +/* + * NS16550 Configuration + */ +#define CFG_NS16550 +#define CFG_NS16550_SERIAL +#define CFG_NS16550_REG_SIZE (-4) +#define CFG_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */ +#define CFG_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */ + +/* + * select serial console configuration + */ +#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1510 Innovator */ + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_DHCP) +#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include +#include + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200n8 noinitrd root=/dev/nfs rw nfsroot=157.87.82.48:/home/a0875451/mwd/myfs/target ip=dhcp" +/*#define CONFIG_ETHADDR 00:0B:36:00:05:25 */ +#define CONFIG_NETMASK 255.255.254.0 /* talk on MY local net */ +#define CONFIG_IPADDR 156.117.97.156 /* static IP I currently own */ +#define CONFIG_SERVERIP 156.117.97.139 /* current IP of my dev pc */ +#define CONFIG_BOOTFILE "/tftpboot/uImage" /* file to load */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ +/* what's this ? it's not used anywhere */ +#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ +#endif + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x10000000 /* memtest works on */ +#define CFG_MEMTEST_END 0x12000000 /* 32 MB in DRAM */ + +#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CFG_LOAD_ADDR 0x10000000 /* default load address */ + +/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1. + * This time is further subdivided by a local divisor. + */ +#define CFG_TIMERBASE 0xFFFEC500 /* use timer 1 */ +#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */ +#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT)) + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ + +#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ + +#define CFG_FLASH_BASE PHYS_FLASH_1 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */ +#define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ +#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x020000) /* addr of environment */ + +/* timeout values are in ticks */ +#define CFG_FLASH_ERASE_TOUT (20*CFG_HZ) /* Timeout for Flash Erase */ +#define CFG_FLASH_WRITE_TOUT (20*CFG_HZ) /* Timeout for Flash Write */ + +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CFG_ENV_OFFSET 0x20000 /* environment starts here */ + +#endif /* __CONFIG_H */ diff --git a/include/ns16550.h b/include/ns16550.h index b2e791a4c0..dff4165e87 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -60,6 +60,13 @@ struct NS16550 { int pad7:24; unsigned char scr; /* 7 */ int pad8:24; +#ifdef CONFIG_OMAP1510 + unsigned char mdr1; /* mode select reset TL16C750*/ + int pad9:24; + unsigned long pad[10]; + unsigned char osc_12m_sel; + int pad10:24; +#endif } __attribute__ ((packed)); #else #error "Please define NS16550 registers size." @@ -102,6 +109,10 @@ typedef volatile struct NS16550 *NS16550_t; #define LSR_TEMT 0x40 /* Xmitter empty */ #define LSR_ERR 0x80 /* Error */ +#ifdef CONFIG_OMAP1510 +#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */ +#endif + /* useful defaults for LCR */ #define LCR_8N1 0x03