From 290e6e921f255fdee072d21539bbad16b9a3e714 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Fri, 21 Nov 2014 17:40:56 +0800 Subject: [PATCH] ls1021a: adding a secondary core boot address and kick functions Define the board specific smp_set_cpu_boot_addr() function to set the start address for secondary cores in the LS1021A specific manner. Define the board specific smp_kick_all_cpus() functioin to boot a secondary core. Here the BRR contains control bits for enabling boot for each core. On exiting HRESET or PORESET, the RCW BOOT_HO field optionally allows for logical core 0 to be released for booting or to remain in boot holdoff. All other cores remain in boot holdoff until their corresponding bit is set. Signed-off-by: Xiubo Li Reviewed-by: York Sun --- arch/arm/cpu/armv7/ls102xa/cpu.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c index fae6c68efc..ce2d92f5a6 100644 --- a/arch/arm/cpu/armv7/ls102xa/cpu.c +++ b/arch/arm/cpu/armv7/ls102xa/cpu.c @@ -117,3 +117,21 @@ int arch_cpu_init(void) return 0; } + +#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) +/* Set the address at which the secondary core starts from.*/ +void smp_set_core_boot_addr(unsigned long addr, int corenr) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + + out_be32(&gur->scratchrw[0], addr); +} + +/* Release the secondary core from holdoff state and kick it */ +void smp_kick_all_cpus(void) +{ + struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); + + out_be32(&gur->brrl, 0x2); +} +#endif