colibri_t20: fix display configuration

Without this patch the following error will be shown:

stdio_add_devices: Video device failed (ret=-22)

As commit ec5507707a (video: tegra: Move
to using simple-panel and pwm-backlight) states the Colibri T20 needs
updating too which this patch finally attempts doing.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
This commit is contained in:
Marcel Ziswiler 2016-09-28 11:24:08 +02:00 committed by Tom Warren
parent dc06f63f2a
commit 28f224a52f

View File

@ -21,12 +21,24 @@
};
host1x@50000000 {
status = "okay";
dc@54200000 {
status = "okay";
rgb {
status = "okay";
nvidia,panel = <&lcd_panel>;
display-timings {
timing@0 {
/* VESA VGA */
clock-frequency = <25175000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hfront-porch = <16>;
hsync-len = <96>;
vback-porch = <31>;
vfront-porch = <11>;
vsync-len = <2>;
};
};
};
};
};
@ -61,6 +73,10 @@
};
};
pwm@7000a000 {
status = "okay";
};
/*
* GEN1_I2C: I2C_SDA/SCL on SODIMM pin 194/196 (e.g. RTC on carrier
* board)
@ -92,6 +108,18 @@
cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>;
};
backlight: backlight {
compatible = "pwm-backlight";
brightness-levels = <255 128 64 32 16 8 4 0>;
default-brightness-level = <6>;
/* BL_ON */
enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
power-supply = <&reg_3v3>;
/* PWM<A> */
pwms = <&pwm 0 5000000>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@ -105,25 +133,28 @@
};
};
pwm: pwm@7000a000 {
status = "okay";
lcd_panel: panel {
/*
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu", "simple-panel";
backlight = <&backlight>;
};
lcd_panel: panel {
clock = <25175000>;
xres = <640>;
yres = <480>;
left-margin = <48>; /* horizontal back porch */
right-margin = <16>; /* horizontal front porch */
hsync-len = <96>;
lower-margin = <11>; /* vertical front porch */
upper-margin = <31>; /* vertical back porch */
vsync-len = <2>;
hsync-active-high;
vsync-active-high;
nvidia,bits-per-pixel = <16>;
nvidia,pwm = <&pwm 0 0>;
nvidia,backlight-enable-gpios = <&gpio TEGRA_GPIO(T, 4) GPIO_ACTIVE_HIGH>;
nvidia,panel-timings = <0 0 0 0>;
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "+V3.3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};