spi: cadence_quadspi: Enable QUAD mode based on DT data

Instead of relying on CONFIG_SPI_FLASH_QUAD to be defined to enable QUAD
mode, make use of mode_rx field of dm_spi_slave_platdata to determine
whether to enable or disable QUAD mode. This is necessary to support
muliple SPI controllers where one of them may not support QUAD mode.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
This commit is contained in:
Vignesh R 2016-07-06 10:20:56 +05:30 committed by Jagan Teki
parent dac3bf20fb
commit 2372e14f19
3 changed files with 8 additions and 7 deletions

View File

@ -191,6 +191,7 @@ static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
struct udevice *bus = dev->parent;
struct cadence_spi_platdata *plat = bus->platdata;
struct cadence_spi_priv *priv = dev_get_priv(bus);
struct dm_spi_slave_platdata *dm_plat = dev_get_parent_platdata(dev);
void *base = priv->regbase;
u8 *cmd_buf = priv->cmd_buf;
size_t data_bytes;
@ -250,7 +251,7 @@ static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
break;
case CQSPI_INDIRECT_READ:
err = cadence_qspi_apb_indirect_read_setup(plat,
priv->cmd_len, cmd_buf);
priv->cmd_len, dm_plat->mode_rx, cmd_buf);
if (!err) {
err = cadence_qspi_apb_indirect_read_execute
(plat, data_bytes, din);

View File

@ -53,7 +53,7 @@ int cadence_qspi_apb_command_write(void *reg_base_addr,
unsigned int txlen, const u8 *txbuf);
int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
unsigned int cmdlen, const u8 *cmdbuf);
unsigned int cmdlen, unsigned int rx_width, const u8 *cmdbuf);
int cadence_qspi_apb_indirect_read_execute(struct cadence_spi_platdata *plat,
unsigned int rxlen, u8 *rxbuf);
int cadence_qspi_apb_indirect_write_setup(struct cadence_spi_platdata *plat,

View File

@ -29,6 +29,7 @@
#include <asm/io.h>
#include <asm/errno.h>
#include <wait_bit.h>
#include <spi.h>
#include "cadence_qspi.h"
#define CQSPI_REG_POLL_US (1) /* 1us */
@ -548,7 +549,7 @@ int cadence_qspi_apb_command_write(void *reg_base, unsigned int cmdlen,
/* Opcode + Address (3/4 bytes) + dummy bytes (0-4 bytes) */
int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
unsigned int cmdlen, const u8 *cmdbuf)
unsigned int cmdlen, unsigned int rx_width, const u8 *cmdbuf)
{
unsigned int reg;
unsigned int rd_reg;
@ -578,10 +579,9 @@ int cadence_qspi_apb_indirect_read_setup(struct cadence_spi_platdata *plat,
/* Configure the opcode */
rd_reg = cmdbuf[0] << CQSPI_REG_RD_INSTR_OPCODE_LSB;
#if (CONFIG_SPI_FLASH_QUAD == 1)
/* Instruction and address at DQ0, data at DQ0-3. */
rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
#endif
if (rx_width & SPI_RX_QUAD)
/* Instruction and address at DQ0, data at DQ0-3. */
rd_reg |= CQSPI_INST_TYPE_QUAD << CQSPI_REG_RD_INSTR_TYPE_DATA_LSB;
/* Get address */
addr_value = cadence_qspi_apb_cmd2addr(&cmdbuf[1], addr_bytes);