Merge git://git.denx.de/u-boot-nand-flash

This commit is contained in:
Tom Rini 2016-06-20 05:15:52 -04:00
commit 2313d48445
12 changed files with 393 additions and 200 deletions

View File

@ -647,6 +647,9 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_CMD_NAND_TORTURE
if (strcmp(cmd, "torture") == 0) {
loff_t endoff;
unsigned int failed = 0, passed = 0;
if (argc < 3)
goto usage;
@ -655,12 +658,37 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 1;
}
printf("\nNAND torture: device %d offset 0x%llx size 0x%x\n",
dev, off, mtd->erasesize);
ret = nand_torture(mtd, off);
printf(" %s\n", ret ? "Failed" : "Passed");
size = mtd->erasesize;
if (argc > 3) {
if (!str2off(argv[3], &size)) {
puts("Size is not a valid number\n");
return 1;
}
}
return ret == 0 ? 0 : 1;
endoff = off + size;
if (endoff > mtd->size) {
puts("Arguments beyond end of NAND\n");
return 1;
}
off = round_down(off, mtd->erasesize);
endoff = round_up(endoff, mtd->erasesize);
size = endoff - off;
printf("\nNAND torture: device %d offset 0x%llx size 0x%llx (block size 0x%x)\n",
dev, off, size, mtd->erasesize);
while (off < endoff) {
ret = nand_torture(mtd, off);
if (ret) {
failed++;
printf(" block at 0x%llx failed\n", off);
} else {
passed++;
}
off += mtd->erasesize;
}
printf(" Passed: %u, failed: %u\n", passed, failed);
return failed != 0;
}
#endif
@ -775,7 +803,8 @@ static char nand_help_text[] =
"nand bad - show bad blocks\n"
"nand dump[.oob] off - dump page\n"
#ifdef CONFIG_CMD_NAND_TORTURE
"nand torture off - torture block at offset\n"
"nand torture off - torture one block at offset\n"
"nand torture off [size] - torture blocks from off to off+size\n"
#endif
"nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
" really clean NAND erasing bad blocks (UNSAFE)\n"

View File

@ -34,7 +34,7 @@ __weak int board_fastboot_write_partition_setup(char *name)
}
static int fb_nand_lookup(const char *partname, char *response,
struct mtd_info **nand,
struct mtd_info **mtd,
struct part_info **part)
{
struct mtd_device *dev;

View File

@ -134,6 +134,13 @@ int spl_nand_load_image(void)
#endif
/* Load u-boot */
err = spl_nand_load_element(CONFIG_SYS_NAND_U_BOOT_OFFS, header);
#ifdef CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND
#if CONFIG_SYS_NAND_U_BOOT_OFFS != CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND
if (err)
err = spl_nand_load_element(CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND,
header);
#endif
#endif
nand_deselect();
return err;
}

View File

@ -137,7 +137,7 @@ Configuration Options:
init:
/* chip is struct nand_chip, and is now provided by the driver. */
mtd = &chip.mtd;
mtd = nand_to_mtd(&chip);
/*
* Fill in appropriate values if this driver uses these fields,
@ -271,7 +271,7 @@ Platform specific options
However, for 4K pagesize NAND
NAND_PAGESIZE = 4096
NAND_OOBSIZE = 64
NAND_OOBSIZE = 224
ECC_BYTES = 26
2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
Thus BCH16 can be supported on 4K page NAND.
@ -307,7 +307,7 @@ Miscellaneous and testing commands:
DANGEROUS!!! Factory set bad blocks will be lost. Use only
to remove artificial bad blocks created with the "markbad" command.
"torture offset"
"torture offset [size]"
Torture block to determine if it is still reliable.
Enabled by the CONFIG_CMD_NAND_TORTURE configuration option.
This command returns 0 if the block is still reliable, else 1.
@ -324,6 +324,10 @@ Miscellaneous and testing commands:
automate actions following a nand->write() error. This would e.g. be required
in order to program or update safely firmware to NAND, especially for the UBI
part of such firmware.
Optionally, a second parameter size can be given to test multiple blocks with
one call. If size is not a multiple of the NAND's erase size, then the block
that contains offset + size will be tested in full. If used with size, this
command returns 0 if all tested blocks have been found reliable, else 1.
NAND locking command (for chips with active LOCKPRE pin)

View File

@ -99,16 +99,31 @@ config SYS_NAND_BUSWIDTH_16BIT
not available while configuring controller. So a static CONFIG_NAND_xx
is needed to know the device's bus-width in advance.
# Enhance depends when converting drivers to Kconfig which use this config
if SPL
config SYS_NAND_U_BOOT_LOCATIONS
bool "Define U-boot binaries locations in NAND"
help
Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
This option should not be enabled when compiling U-boot for boards
defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
file.
config SYS_NAND_U_BOOT_OFFS
hex "Location in NAND to read U-Boot from"
default 0x8000 if NAND_SUNXI
depends on NAND_SUNXI
depends on SYS_NAND_U_BOOT_LOCATIONS
help
Set the offset from the start of the nand where u-boot should be
loaded from.
if SPL
config SYS_NAND_U_BOOT_OFFS_REDUND
hex "Location in NAND to read U-Boot from"
default SYS_NAND_U_BOOT_OFFS
depends on SYS_NAND_U_BOOT_LOCATIONS
help
Set the offset from the start of the nand where the redundant u-boot
should be loaded from.
config SPL_NAND_DENALI
bool "Support Denali NAND controller for SPL"

View File

@ -223,7 +223,7 @@ void nand_init(void)
/*
* Init board specific nand support
*/
mtd = &nand_chip.mtd;
mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);

View File

@ -1449,7 +1449,7 @@ int board_nand_init(struct nand_chip *nand)
void nand_init(void)
{
mtd = &nand_chip.mtd;
mtd = nand_to_mtd(&nand_chip);
mtd->writesize = CONFIG_SYS_NAND_PAGE_SIZE;
mtd->oobsize = CONFIG_SYS_NAND_OOBSIZE;
nand_chip.IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;

View File

@ -541,7 +541,7 @@ static struct nand_chip lpc32xx_chip;
void board_nand_init(void)
{
struct mtd_info *mtd = &lpc32xx_chip.mtd;
struct mtd_info *mtd = nand_to_mtd(&lpc32xx_chip);
int ret;
/* Set all BOARDSPECIFIC (actually core-specific) fields */

View File

@ -147,7 +147,7 @@ static int mxs_nand_init(void)
/* init mxs nand driver */
board_nand_init(&nand_chip);
mtd = &nand_chip.mtd;
mtd = nand_to_mtd(&nand_chip);
/* set mtd functions */
nand_chip.cmdfunc = mxs_nand_command;
nand_chip.numchips = 1;

View File

@ -249,7 +249,7 @@ void nand_init(void)
/*
* Init board specific nand support
*/
mtd = &nand_chip.mtd;
mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);

View File

@ -820,7 +820,7 @@ int nand_torture(struct mtd_info *mtd, loff_t offset)
{
u_char patterns[] = {0xa5, 0x5a, 0x00};
struct erase_info instr = {
.mtd = nand,
.mtd = mtd,
.addr = offset,
.len = mtd->erasesize,
};

View File

@ -66,6 +66,8 @@
#define NFC_ROW_AUTO_INC (1 << 27)
#define NFC_SEND_CMD3 (1 << 28)
#define NFC_SEND_CMD4 (1 << 29)
#define NFC_RAW_CMD (0 << 30)
#define NFC_PAGE_CMD (2 << 30)
#define NFC_ST_CMD_INT_FLAG (1 << 1)
#define NFC_ST_DMA_INT_FLAG (1 << 2)
@ -78,9 +80,6 @@
#define NFC_CMD_RNDOUT 0x05
#define NFC_CMD_READSTART 0x30
#define NFC_PAGE_CMD (2 << 30)
#define SUNXI_DMA_CFG_REG0 0x300
#define SUNXI_DMA_SRC_START_ADDR_REG0 0x304
#define SUNXI_DMA_DEST_START_ADDRR_REG0 0x308
@ -97,6 +96,16 @@
#define SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC (0x0F << 0)
#define SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE (0x7F << 8)
struct nfc_config {
int page_size;
int ecc_strength;
int ecc_size;
int addr_cycles;
int nseeds;
bool randomize;
bool valid;
};
/* minimal "boot0" style NAND support for Allwinner A20 */
/* random seed used by linux */
@ -119,38 +128,31 @@ const uint16_t random_seed[128] = {
0x7c57, 0x0fbe, 0x46ce, 0x4939, 0x6b17, 0x37bb, 0x3e91, 0x76db,
};
/* random seed used for syndrome calls */
const uint16_t random_seed_syndrome = 0x4a80;
#define MAX_RETRIES 10
#define DEFAULT_TIMEOUT_US 100000
static int check_value_inner(int offset, int expected_bits,
int max_number_of_retries, int negation)
int timeout_us, int negation)
{
int retries = 0;
do {
int val = readl(offset) & expected_bits;
if (negation ? !val : val)
return 1;
mdelay(1);
retries++;
} while (retries < max_number_of_retries);
udelay(1);
} while (--timeout_us);
return 0;
}
static inline int check_value(int offset, int expected_bits,
int max_number_of_retries)
int timeout_us)
{
return check_value_inner(offset, expected_bits,
max_number_of_retries, 0);
return check_value_inner(offset, expected_bits, timeout_us, 0);
}
static inline int check_value_negated(int offset, int unexpected_bits,
int max_number_of_retries)
int timeout_us)
{
return check_value_inner(offset, unexpected_bits,
max_number_of_retries, 1);
return check_value_inner(offset, unexpected_bits, timeout_us, 1);
}
void nand_init(void)
@ -165,7 +167,7 @@ void nand_init(void)
SUNXI_NFC_BASE + NFC_CTL);
if (!check_value_negated(SUNXI_NFC_BASE + NFC_CTL,
NFC_CTL_RESET, MAX_RETRIES)) {
NFC_CTL_RESET, DEFAULT_TIMEOUT_US)) {
printf("Couldn't initialize nand\n");
}
@ -175,64 +177,97 @@ void nand_init(void)
SUNXI_NFC_BASE + NFC_CMD);
if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG,
MAX_RETRIES)) {
DEFAULT_TIMEOUT_US)) {
printf("Error timeout waiting for nand reset\n");
return;
}
writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
}
static int nand_read_page(int page_size, int ecc_strength, int ecc_page_size,
int addr_cycles, uint32_t real_addr, dma_addr_t dst, int syndrome)
static void nand_apply_config(const struct nfc_config *conf)
{
uint32_t val;
int i, ecc_off = 0;
uint16_t ecc_mode = 0;
uint16_t rand_seed;
uint32_t page;
uint16_t column;
static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
u32 val;
for (i = 0; i < ARRAY_SIZE(strengths); i++) {
if (ecc_strength == strengths[i]) {
ecc_mode = i;
break;
}
val = readl(SUNXI_NFC_BASE + NFC_CTL);
val &= ~NFC_CTL_PAGE_SIZE_MASK;
writel(val | NFC_CTL_RAM_METHOD | NFC_CTL_PAGE_SIZE(conf->page_size),
SUNXI_NFC_BASE + NFC_CTL);
writel(conf->ecc_size, SUNXI_NFC_BASE + NFC_CNT);
writel(conf->page_size, SUNXI_NFC_BASE + NFC_SPARE_AREA);
}
static int nand_load_page(const struct nfc_config *conf, u32 offs)
{
int page = offs / conf->page_size;
writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) |
(NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) |
(NFC_CMD_READSTART << NFC_READ_CMD_OFFSET),
SUNXI_NFC_BASE + NFC_RCMD_SET);
writel(((page & 0xFFFF) << 16), SUNXI_NFC_BASE + NFC_ADDR_LOW);
writel((page >> 16) & 0xFF, SUNXI_NFC_BASE + NFC_ADDR_HIGH);
writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | NFC_WAIT_FLAG |
((conf->addr_cycles - 1) << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADR,
SUNXI_NFC_BASE + NFC_CMD);
if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG,
DEFAULT_TIMEOUT_US)) {
printf("Error while initializing dma interrupt\n");
return -EIO;
}
/* HW ECC always request ECC bytes for 1024 bytes blocks */
ecc_off = DIV_ROUND_UP(ecc_strength * fls(8 * 1024), 8);
/* HW ECC always work with even numbers of ECC bytes */
ecc_off += (ecc_off & 1);
ecc_off += 4; /* prepad */
return 0;
}
page = real_addr / page_size;
column = real_addr % page_size;
static int nand_reset_column(void)
{
writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) |
(NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) |
(NFC_CMD_RNDOUTSTART << NFC_READ_CMD_OFFSET),
SUNXI_NFC_BASE + NFC_RCMD_SET);
writel(0, SUNXI_NFC_BASE + NFC_ADDR_LOW);
writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD |
(1 << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADR | NFC_CMD_RNDOUT,
SUNXI_NFC_BASE + NFC_CMD);
if (syndrome)
column += (column / ecc_page_size) * ecc_off;
if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG,
DEFAULT_TIMEOUT_US)) {
printf("Error while initializing dma interrupt\n");
return -1;
}
return 0;
}
static int nand_read_page(const struct nfc_config *conf, u32 offs,
void *dest, int len)
{
dma_addr_t dst = (dma_addr_t)dest;
int nsectors = len / conf->ecc_size;
u16 rand_seed;
u32 val;
int page;
page = offs / conf->page_size;
if (offs % conf->page_size || len % conf->ecc_size ||
len > conf->page_size || len < 0)
return -EINVAL;
/* clear ecc status */
writel(0, SUNXI_NFC_BASE + NFC_ECC_ST);
/* Choose correct seed */
if (syndrome)
rand_seed = random_seed_syndrome;
else
rand_seed = random_seed[page % 128];
rand_seed = random_seed[page % conf->nseeds];
writel((rand_seed << 16) | NFC_ECC_RANDOM_EN | NFC_ECC_EN
| NFC_ECC_PIPELINE | (ecc_mode << 12),
writel((rand_seed << 16) | (conf->ecc_strength << 12) |
(conf->randomize ? NFC_ECC_RANDOM_EN : 0) |
(conf->ecc_size == 512 ? NFC_ECC_BLOCK_SIZE : 0) |
NFC_ECC_EN | NFC_ECC_PIPELINE | NFC_ECC_EXCEPTION,
SUNXI_NFC_BASE + NFC_ECC_CTL);
val = readl(SUNXI_NFC_BASE + NFC_CTL);
writel(val | NFC_CTL_RAM_METHOD, SUNXI_NFC_BASE + NFC_CTL);
if (!syndrome)
writel(page_size + (column / ecc_page_size) * ecc_off,
SUNXI_NFC_BASE + NFC_SPARE_AREA);
flush_dcache_range(dst, ALIGN(dst + ecc_page_size, ARCH_DMA_MINALIGN));
flush_dcache_range(dst, ALIGN(dst + conf->ecc_size, ARCH_DMA_MINALIGN));
/* SUNXI_DMA */
writel(0x0, SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0); /* clr dma cmd */
@ -241,158 +276,261 @@ static int nand_read_page(int page_size, int ecc_strength, int ecc_page_size,
SUNXI_DMA_BASE + SUNXI_DMA_SRC_START_ADDR_REG0);
/* read to RAM */
writel(dst, SUNXI_DMA_BASE + SUNXI_DMA_DEST_START_ADDRR_REG0);
writel(SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC
| SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE,
SUNXI_DMA_BASE + SUNXI_DMA_DDMA_PARA_REG0);
writel(ecc_page_size,
SUNXI_DMA_BASE + SUNXI_DMA_DDMA_BC_REG0); /* 1kB */
writel(SUNXI_DMA_DDMA_CFG_REG_LOADING
| SUNXI_DMA_DDMA_CFG_REG_DMA_DEST_DATA_WIDTH_32
| SUNXI_DMA_DDMA_CFG_REG_DDMA_DST_DRQ_TYPE_DRAM
| SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_DATA_WIDTH_32
| SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_ADDR_MODE_IO
| SUNXI_DMA_DDMA_CFG_REG_DDMA_SRC_DRQ_TYPE_NFC,
SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0);
writel(SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC |
SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE,
SUNXI_DMA_BASE + SUNXI_DMA_DDMA_PARA_REG0);
writel(len, SUNXI_DMA_BASE + SUNXI_DMA_DDMA_BC_REG0);
writel(SUNXI_DMA_DDMA_CFG_REG_LOADING |
SUNXI_DMA_DDMA_CFG_REG_DMA_DEST_DATA_WIDTH_32 |
SUNXI_DMA_DDMA_CFG_REG_DDMA_DST_DRQ_TYPE_DRAM |
SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_DATA_WIDTH_32 |
SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_ADDR_MODE_IO |
SUNXI_DMA_DDMA_CFG_REG_DDMA_SRC_DRQ_TYPE_NFC,
SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0);
writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET)
| (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET)
| (NFC_CMD_READSTART | NFC_READ_CMD_OFFSET), SUNXI_NFC_BASE
+ NFC_RCMD_SET);
writel(1, SUNXI_NFC_BASE + NFC_SECTOR_NUM);
writel(((page & 0xFFFF) << 16) | column,
SUNXI_NFC_BASE + NFC_ADDR_LOW);
writel((page >> 16) & 0xFF, SUNXI_NFC_BASE + NFC_ADDR_HIGH);
writel(nsectors, SUNXI_NFC_BASE + NFC_SECTOR_NUM);
writel(NFC_ST_DMA_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_DATA_TRANS |
NFC_PAGE_CMD | NFC_WAIT_FLAG |
((addr_cycles - 1) << NFC_ADDR_NUM_OFFSET) |
NFC_SEND_ADR | NFC_DATA_SWAP_METHOD | (syndrome ? NFC_SEQ : 0),
SUNXI_NFC_BASE + NFC_CMD);
writel(NFC_DATA_TRANS | NFC_PAGE_CMD | NFC_DATA_SWAP_METHOD,
SUNXI_NFC_BASE + NFC_CMD);
if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_DMA_INT_FLAG,
MAX_RETRIES)) {
DEFAULT_TIMEOUT_US)) {
printf("Error while initializing dma interrupt\n");
return -1;
return -EIO;
}
writel(NFC_ST_DMA_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
if (!check_value_negated(SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0,
SUNXI_DMA_DDMA_CFG_REG_LOADING, MAX_RETRIES)) {
SUNXI_DMA_DDMA_CFG_REG_LOADING,
DEFAULT_TIMEOUT_US)) {
printf("Error while waiting for dma transfer to finish\n");
return -1;
return -EIO;
}
invalidate_dcache_range(dst,
ALIGN(dst + ecc_page_size, ARCH_DMA_MINALIGN));
ALIGN(dst + conf->ecc_size, ARCH_DMA_MINALIGN));
if (readl(SUNXI_NFC_BASE + NFC_ECC_ST))
return -1;
val = readl(SUNXI_NFC_BASE + NFC_ECC_ST);
return 0;
/* ECC error detected. */
if (val & 0xffff)
return -EIO;
/*
* Return 1 if the page is empty.
* We consider the page as empty if the first ECC block is marked
* empty.
*/
return (val & 0x10000) ? 1 : 0;
}
static int nand_read_ecc(int page_size, int ecc_strength, int ecc_page_size,
int addr_cycles, uint32_t offs, uint32_t size, void *dest, int syndrome)
static int nand_max_ecc_strength(struct nfc_config *conf)
{
void *end = dest + size;
clrsetbits_le32(SUNXI_NFC_BASE + NFC_CTL, NFC_CTL_PAGE_SIZE_MASK,
NFC_CTL_PAGE_SIZE(page_size));
for ( ;dest < end; dest += ecc_page_size, offs += ecc_page_size) {
if (nand_read_page(page_size, ecc_strength, ecc_page_size,
addr_cycles, offs, (dma_addr_t)dest,
syndrome))
return -1;
}
return 0;
}
static int nand_read_buffer(uint32_t offs, unsigned int size, void *dest,
int syndrome)
{
const struct {
int page_size;
int ecc_strength;
int ecc_page_size;
int addr_cycles;
} nand_configs[] = {
{ 8192, 40, 1024, 5 },
{ 16384, 56, 1024, 5 },
{ 8192, 24, 1024, 5 },
{ 4096, 24, 1024, 5 },
};
static int nand_config = -1;
static const int ecc_bytes[] = { 32, 46, 54, 60, 74, 88, 102, 110, 116 };
int max_oobsize, max_ecc_bytes;
int nsectors = conf->page_size / conf->ecc_size;
int i;
if (nand_config == -1) {
for (i = 0; i < ARRAY_SIZE(nand_configs); i++) {
debug("nand: trying page %d ecc %d / %d addr %d: ",
nand_configs[i].page_size,
nand_configs[i].ecc_strength,
nand_configs[i].ecc_page_size,
nand_configs[i].addr_cycles);
if (nand_read_ecc(nand_configs[i].page_size,
nand_configs[i].ecc_strength,
nand_configs[i].ecc_page_size,
nand_configs[i].addr_cycles,
offs, size, dest, syndrome) == 0) {
debug("success\n");
nand_config = i;
return 0;
}
debug("failed\n");
}
return -1;
/*
* ECC strength is limited by the size of the OOB area which is
* correlated with the page size.
*/
switch (conf->page_size) {
case 2048:
max_oobsize = 64;
break;
case 4096:
max_oobsize = 256;
break;
case 8192:
max_oobsize = 640;
break;
case 16384:
max_oobsize = 1664;
break;
default:
return -EINVAL;
}
return nand_read_ecc(nand_configs[nand_config].page_size,
nand_configs[nand_config].ecc_strength,
nand_configs[nand_config].ecc_page_size,
nand_configs[nand_config].addr_cycles,
offs, size, dest, syndrome);
max_ecc_bytes = max_oobsize / nsectors;
for (i = 0; i < ARRAY_SIZE(ecc_bytes); i++) {
if (ecc_bytes[i] > max_ecc_bytes)
break;
}
if (!i)
return -EINVAL;
return i - 1;
}
static int nand_detect_ecc_config(struct nfc_config *conf, u32 offs,
void *dest)
{
/* NAND with pages > 4k will likely require 1k sector size. */
int min_ecc_size = conf->page_size > 4096 ? 1024 : 512;
int page = offs / conf->page_size;
int ret;
/*
* In most cases, 1k sectors are preferred over 512b ones, start
* testing this config first.
*/
for (conf->ecc_size = 1024; conf->ecc_size >= min_ecc_size;
conf->ecc_size >>= 1) {
int max_ecc_strength = nand_max_ecc_strength(conf);
nand_apply_config(conf);
/*
* We are starting from the maximum ECC strength because
* most of the time NAND vendors provide an OOB area that
* barely meets the ECC requirements.
*/
for (conf->ecc_strength = max_ecc_strength;
conf->ecc_strength >= 0;
conf->ecc_strength--) {
conf->randomize = false;
if (nand_reset_column())
return -EIO;
/*
* Only read the first sector to speedup detection.
*/
ret = nand_read_page(conf, offs, dest, conf->ecc_size);
if (!ret) {
return 0;
} else if (ret > 0) {
/*
* If page is empty we can't deduce anything
* about the ECC config => stop the detection.
*/
return -EINVAL;
}
conf->randomize = true;
conf->nseeds = ARRAY_SIZE(random_seed);
do {
if (nand_reset_column())
return -EIO;
if (!nand_read_page(conf, offs, dest,
conf->ecc_size))
return 0;
/*
* Find the next ->nseeds value that would
* change the randomizer seed for the page
* we're trying to read.
*/
while (conf->nseeds >= 16) {
int seed = page % conf->nseeds;
conf->nseeds >>= 1;
if (seed != page % conf->nseeds)
break;
}
} while (conf->nseeds >= 16);
}
}
return -EINVAL;
}
static int nand_detect_config(struct nfc_config *conf, u32 offs, void *dest)
{
if (conf->valid)
return 0;
/*
* Modern NANDs are more likely than legacy ones, so we start testing
* with 5 address cycles.
*/
for (conf->addr_cycles = 5;
conf->addr_cycles >= 4;
conf->addr_cycles--) {
int max_page_size = conf->addr_cycles == 4 ? 2048 : 16384;
/*
* Ignoring 1k pages cause I'm not even sure this case exist
* in the real world.
*/
for (conf->page_size = 2048; conf->page_size <= max_page_size;
conf->page_size <<= 1) {
if (nand_load_page(conf, offs))
return -1;
if (!nand_detect_ecc_config(conf, offs, dest)) {
conf->valid = true;
return 0;
}
}
}
return -EINVAL;
}
static int nand_read_buffer(struct nfc_config *conf, uint32_t offs,
unsigned int size, void *dest)
{
int first_seed, page, ret;
size = ALIGN(size, conf->page_size);
page = offs / conf->page_size;
first_seed = page % conf->nseeds;
for (; size; size -= conf->page_size) {
if (nand_load_page(conf, offs))
return -1;
ret = nand_read_page(conf, offs, dest, conf->page_size);
/*
* The ->nseeds value should be equal to the number of pages
* in an eraseblock. Since we don't know this information in
* advance we might have picked a wrong value.
*/
if (ret < 0 && conf->randomize) {
int cur_seed = page % conf->nseeds;
/*
* We already tried all the seed values => we are
* facing a real corruption.
*/
if (cur_seed < first_seed)
return -EIO;
/* Try to adjust ->nseeds and read the page again... */
conf->nseeds = cur_seed;
if (nand_reset_column())
return -EIO;
/* ... it still fails => it's a real corruption. */
if (nand_read_page(conf, offs, dest, conf->page_size))
return -EIO;
} else if (ret && conf->randomize) {
memset(dest, 0xff, conf->page_size);
}
page++;
offs += conf->page_size;
dest += conf->page_size;
}
return 0;
}
int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest)
{
#if CONFIG_SYS_NAND_U_BOOT_OFFS == CONFIG_SPL_PAD_TO
/*
* u-boot-dtb.bin appended to SPL, use syndrome (like the BROM does)
* and try different erase block sizes to find the backup.
*/
const uint32_t boot_offsets[] = {
0 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
1 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
2 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
4 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
};
const int syndrome = 1;
#else
/*
* u-boot-dtb.bin on its own partition, do not use syndrome, u-boot
* partition sits after 2 eraseblocks (spl, spl-backup), look for
* backup u-boot 1 erase block further.
*/
const uint32_t eraseblock_size = CONFIG_SYS_NAND_U_BOOT_OFFS / 2;
const uint32_t boot_offsets[] = {
CONFIG_SYS_NAND_U_BOOT_OFFS,
CONFIG_SYS_NAND_U_BOOT_OFFS + eraseblock_size,
};
const int syndrome = 0;
#endif
int i;
static struct nfc_config conf = { };
int ret;
if (offs == CONFIG_SYS_NAND_U_BOOT_OFFS) {
for (i = 0; i < ARRAY_SIZE(boot_offsets); i++) {
if (nand_read_buffer(boot_offsets[i], size,
dest, syndrome) == 0)
return 0;
}
return -1;
}
ret = nand_detect_config(&conf, offs, dest);
if (ret)
return ret;
return nand_read_buffer(offs, size, dest, syndrome);
return nand_read_buffer(&conf, offs, size, dest);
}
void nand_deselect(void)