sspi: add options to specify bus and mode

and clean up error messages and help,
removed pointless debug() call.

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
This commit is contained in:
Reinhard Meyer 2010-08-26 10:57:27 +02:00 committed by Mike Frysinger
parent ff0dc2c433
commit 21032b35a0

View File

@ -47,7 +47,9 @@
/*
* Values from last command.
*/
static unsigned int device;
static unsigned int bus;
static unsigned int cs;
static unsigned int mode;
static int bitlen;
static uchar dout[MAX_SPI_BYTES];
static uchar din[MAX_SPI_BYTES];
@ -78,8 +80,18 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if ((flag & CMD_FLAG_REPEAT) == 0)
{
if (argc >= 2)
device = simple_strtoul(argv[1], NULL, 10);
if (argc >= 2) {
mode = CONFIG_DEFAULT_SPI_MODE;
bus = simple_strtoul(argv[1], &cp, 10);
if (*cp == ':') {
cs = simple_strtoul(cp+1, &cp, 10);
} else {
cs = bus;
bus = CONFIG_DEFAULT_SPI_BUS;
}
if (*cp == '.');
mode = simple_strtoul(cp+1, NULL, 10);
}
if (argc >= 3)
bitlen = simple_strtoul(argv[2], NULL, 10);
if (argc >= 4) {
@ -91,7 +103,7 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
if(tmp > 15)
tmp -= ('a' - 'A');
if(tmp > 15) {
printf("Hex conversion error on %c, giving up.\n", *cp);
printf("Hex conversion error on %c\n", *cp);
return 1;
}
if((j % 2) == 0)
@ -103,24 +115,20 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
}
if ((bitlen < 0) || (bitlen > (MAX_SPI_BYTES * 8))) {
printf("Invalid bitlen %d, giving up.\n", bitlen);
printf("Invalid bitlen %d\n", bitlen);
return 1;
}
/* FIXME: Make these parameters run-time configurable */
slave = spi_setup_slave(CONFIG_DEFAULT_SPI_BUS, device, 1000000,
CONFIG_DEFAULT_SPI_MODE);
slave = spi_setup_slave(bus, cs, 1000000, mode);
if (!slave) {
printf("Invalid device %d, giving up.\n", device);
printf("Invalid device %d:%d\n", bus, cs);
return 1;
}
debug ("spi chipsel = %08X\n", device);
spi_claim_bus(slave);
if(spi_xfer(slave, bitlen, dout, din,
SPI_XFER_BEGIN | SPI_XFER_END) != 0) {
printf("Error with the SPI transaction.\n");
printf("Error during SPI transaction\n");
rcode = 1;
} else {
for(j = 0; j < ((bitlen + 7) / 8); j++) {
@ -138,9 +146,11 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
U_BOOT_CMD(
sspi, 5, 1, do_spi,
"SPI utility commands",
"<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n"
"<device> - Identifies the chip select of the device\n"
"SPI utility command",
"[<bus>:]<cs>[.<mode>] <bit_len> <dout> - Send and receive bits\n"
"<bus> - Identifies the SPI bus\n"
"<cs> - Identifies the chip select\n"
"<mode> - Identifies the SPI mode to use\n"
"<bit_len> - Number of bits to send (base 10)\n"
"<dout> - Hexadecimal string that gets sent"
);