mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-29 16:10:24 +09:00
Get rid of duplicated file (see doc/README.SBC8560 instead)
Signed-off-by: Wolfgang Denk <wd@denx.de>
This commit is contained in:
parent
ac4cd59d59
commit
207b7b2c9d
@ -1,53 +0,0 @@
|
||||
The port was tested on Wind River System Sbc8560 board <www.windriver.com>.
|
||||
U-Boot was installed on the flash memory of the CPU card (no the SODIMM).
|
||||
|
||||
NOTE: Please configure uboot compile to the proper PCI frequency and
|
||||
setup the appropriate DIP switch settings.
|
||||
|
||||
SBC8560 board:
|
||||
|
||||
Make sure boards switches are set to their appropriate conditions.
|
||||
Refer to the Engineering Reference Guide ERG-00300-002. Of particular
|
||||
importance are: 1)Tthe settings for JP4 (JP4 1-3 and 2-4), which
|
||||
select the on-board FLASH device (Intel 28F128Jx); 2) The settings
|
||||
for the Clock SW9 (33 MHz or 66 MHz).
|
||||
|
||||
Note: SW9 Settings: 66 MHz
|
||||
4:1 ratio CCB clocks:SYSCLK
|
||||
3:1 ration e500 Core:CCB
|
||||
pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on
|
||||
Note: SW9 Settings: 33 MHz
|
||||
8:1 ratio CCB clocks:SYSCLK
|
||||
3:1 ration e500 Core:CCB
|
||||
pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on
|
||||
|
||||
|
||||
Flashing the FLASH device with the "Wind River ICE":
|
||||
|
||||
1) Properly connect and configure the Wind River ICE to the
|
||||
target JTAG port. This includes running the SBC8560 register script.
|
||||
Make sure target memory can be read and written.
|
||||
|
||||
2) Build the u-boot image:
|
||||
make distclean
|
||||
make SBC8560_66_config or SBC8560_33_config
|
||||
make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all
|
||||
|
||||
Note: reference is made to the ELDK3.0 compiler but any 85xx cross-compiler
|
||||
should suffice.
|
||||
|
||||
3) Convert the uboot (.elf) file to a uboot.bin file (using visionClick converter).
|
||||
The bin file should be converted from fffc0000 to ffffffff
|
||||
|
||||
4) Setup the Flash Utility (tools menu) for:
|
||||
|
||||
Determine the clock speed of the PCI bus and set SW9 accordingly
|
||||
Note: the speed of the PCI bus defaults to the slowest PCI card
|
||||
PlayBack the "default" register file for the SBC8560
|
||||
Select the uboot.bin file with zero bias
|
||||
Select the initialize Target prior to programming
|
||||
Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm
|
||||
Select the erase base address from FFFC0000 to FFFFFFFF
|
||||
Select the start address from 0 with size of 4000
|
||||
|
||||
5) Erase and Program
|
Loading…
Reference in New Issue
Block a user