brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-06-09 23:36:03 +09:00
Code Issues Projects Releases Wiki Activity

ARM: display5: Remove UART initialization code after DM/DTS conversion (non-console)

Browse Source 
This UART is not used in U-Boot, so there is no need to initialize it.

Signed-off-by: Lukasz Majewski <lukma@denx.de>
This commit is contained in:
Lukasz Majewski 2019-09-03 16:38:44 +02:00 committed by Stefano Babic
parent e95b4bdd8d
commit 1743d6676d
3 changed files with 0 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
board/liebherr/display5/common.c
View File

@ -8,14 +8,6 @@
#include <asm/arch/mx6-pins.h>
#include "common.h"
iomux_v3_cfg_t const uart_pads[] = {
/* UART4 */
MX6_PAD_CSI0_DAT12__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT13__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT16__UART4_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_CSI0_DAT17__UART4_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
};
iomux_v3_cfg_t const uart_console_pads[] = {
/* UART5 */
MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
@ -29,11 +21,6 @@ void displ5_set_iomux_uart_spl(void)
SETUP_IOMUX_PADS(uart_console_pads);
}
void displ5_set_iomux_uart(void)
{
SETUP_IOMUX_PADS(uart_pads);
}
iomux_v3_cfg_t const misc_pads_spl[] = {
/* Emergency recovery pin */
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),

1
board/liebherr/display5/common.h
View File

@ -32,7 +32,6 @@
PAD_CTL_SPEED_HIGH | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
void displ5_set_iomux_uart_spl(void);
void displ5_set_iomux_uart(void);
void displ5_set_iomux_ecspi_spl(void);
void displ5_set_iomux_usdhc_spl(void);
void displ5_set_iomux_misc_spl(void);

2
board/liebherr/display5/display5.c
View File

@ -174,8 +174,6 @@ int board_init(void)
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
/* Setup iomux for non console UARTS */
displ5_set_iomux_uart();
/* Setup misc (application specific) stuff */
SETUP_IOMUX_PADS(misc_pads);