am335x_evm: Fix CPSW ethernet on GP EVM and EVM-SK

In commit cfd4ff6 we implemented part of advisory 1.0.10 (internal delay
for RGMII mode not supported).  This in turn however requires that we
set the tx clock delay feature in the PHY itself.

Signed-off-by: Tom Rini <trini@ti.com>
This commit is contained in:
Tom Rini 2013-02-12 14:59:23 -05:00
parent 951c6baaf4
commit 1634e96918

View File

@ -73,6 +73,11 @@ static inline int board_is_idk(void)
return !strncmp(header.config, "SKU#02", 6);
}
static int board_is_gp_evm(void)
{
return !strncmp("A33515BB", header.name, 8);
}
int board_is_evm_15_or_later(void)
{
return (!strncmp("A33515BB", header.name, 8) &&
@ -466,6 +471,28 @@ int board_eth_init(bd_t *bis)
printf("Error %d registering CPSW switch\n", rv);
else
n += rv;
/*
*
* CPSW RGMII Internal Delay Mode is not supported in all PVT
* operating points. So we must set the TX clock delay feature
* in the AR8051 PHY. Since we only support a single ethernet
* device in U-Boot, we only do this for the first instance.
*/
#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
#define AR8051_PHY_DEBUG_DATA_REG 0x1e
#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
#define AR8051_RGMII_TX_CLK_DLY 0x100
if (board_is_evm_sk() || board_is_gp_evm()) {
const char *devname;
devname = miiphy_get_current_dev();
miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG,
AR8051_DEBUG_RGMII_CLK_DLY_REG);
miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG,
AR8051_RGMII_TX_CLK_DLY);
}
#endif
try_usbether:
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)