musb: Allow musb_platform_enable to return an error code

Allow musb_platform_enable to return an error code and propagate it up to
usb_lowlevel_init().

This allows moving the checks for an external vbus being present to be
moved from platform_init to platform_enable, so that the user can unplug a
charger, plug in a host adapter with a usb-device, do a "usb reset" and
have things working.

This also allows adding a check for the id-pin to platform_enable, so that
it can short circuit the 1s delay in usb_lowlevel_init() when no host cable
is plugged in and thus waiting for a device to show up is useless.

Note that all the changes to code shared with the kernel are wrapped in
the kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Glass <sjg@chromium.org>

drivers/usb/musb-new/am35x.c

@@ -100,7 +100,11 @@ struct am35x_glue {
 /*
  * am35x_musb_enable - enable interrupts
  */
+#ifndef __UBOOT__
 static void am35x_musb_enable(struct musb *musb)
+#else
+static int am35x_musb_enable(struct musb *musb)
+#endif
 {
 	void __iomem *reg_base = musb->ctrl_base;
 	u32 epmask;
@@ -116,6 +120,9 @@ static void am35x_musb_enable(struct musb *musb)
 	if (is_otg_enabled(musb))
 		musb_writel(reg_base, CORE_INTR_SRC_SET_REG,
 			    AM35X_INTR_DRVVBUS << AM35X_INTR_USB_SHIFT);
+#ifdef __UBOOT__
+	return 0;
+#endif
 }
 
 /*

drivers/usb/musb-new/musb_core.c

@@ -926,10 +926,17 @@ b_host:
 /*
 * Program the HDRC to start (enable interrupts, dma, etc.).
 */
+#ifndef __UBOOT__
 void musb_start(struct musb *musb)
+#else
+int musb_start(struct musb *musb)
+#endif
 {
 	void __iomem	*regs = musb->mregs;
 	u8		devctl = musb_readb(regs, MUSB_DEVCTL);
+#ifdef __UBOOT__
+	int ret;
+#endif
 
 	dev_dbg(musb->controller, "<== devctl %02x\n", devctl);
 
@@ -972,8 +979,21 @@ void musb_start(struct musb *musb)
 		if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
 			musb->is_active = 1;
 	}
+
+#ifndef __UBOOT__
 	musb_platform_enable(musb);
+#else
+	ret = musb_platform_enable(musb);
+	if (ret) {
+		musb->is_active = 0;
+		return ret;
+	}
+#endif
 	musb_writeb(regs, MUSB_DEVCTL, devctl);
+
+#ifdef __UBOOT__
+	return 0;
+#endif
 }
 
 

drivers/usb/musb-new/musb_core.h

@@ -231,7 +231,11 @@ struct musb_platform_ops {
 	int	(*init)(struct musb *musb);
 	int	(*exit)(struct musb *musb);
 
+#ifndef __UBOOT__
 	void	(*enable)(struct musb *musb);
+#else
+	int	(*enable)(struct musb *musb);
+#endif
 	void	(*disable)(struct musb *musb);
 
 	int	(*set_mode)(struct musb *musb, u8 mode);
@@ -546,7 +550,11 @@ static inline void musb_configure_ep0(struct musb *musb)
 
 extern const char musb_driver_name[];
 
+#ifndef __UBOOT__
 extern void musb_start(struct musb *musb);
+#else
+extern int musb_start(struct musb *musb);
+#endif
 extern void musb_stop(struct musb *musb);
 
 extern void musb_write_fifo(struct musb_hw_ep *ep, u16 len, const u8 *src);
@@ -564,11 +572,21 @@ static inline void musb_platform_set_vbus(struct musb *musb, int is_on)
 		musb->ops->set_vbus(musb, is_on);
 }
 
+#ifndef __UBOOT__
 static inline void musb_platform_enable(struct musb *musb)
 {
 	if (musb->ops->enable)
 		musb->ops->enable(musb);
 }
+#else
+static inline int musb_platform_enable(struct musb *musb)
+{
+	if (!musb->ops->enable)
+		return 0;
+
+	return musb->ops->enable(musb);
+}
+#endif
 
 static inline void musb_platform_disable(struct musb *musb)
 {

drivers/usb/musb-new/musb_dsps.c

@@ -156,7 +156,11 @@ struct dsps_glue {
 /**
  * dsps_musb_enable - enable interrupts
  */
+#ifndef __UBOOT__
 static void dsps_musb_enable(struct musb *musb)
+#else
+static int dsps_musb_enable(struct musb *musb)
+#endif
 {
 #ifndef __UBOOT__
 	struct device *dev = musb->controller;
@@ -181,6 +185,8 @@ static void dsps_musb_enable(struct musb *musb)
 	if (is_otg_enabled(musb))
 		dsps_writel(reg_base, wrp->coreintr_set,
 			    (1 << wrp->drvvbus) << wrp->usb_shift);
+#else
+	return 0;
 #endif
 }
 

drivers/usb/musb-new/musb_uboot.c

@@ -217,13 +217,17 @@ int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
 	void *mbase;
 	/* USB spec says it may take up to 1 second for a device to connect */
 	unsigned long timeout = get_timer(0) + 1000;
+	int ret;
 
 	if (!host) {
 		printf("MUSB host is not registered\n");
 		return -ENODEV;
 	}
 
-	musb_start(host);
+	ret = musb_start(host);
+	if (ret)
+		return ret;
+
 	mbase = host->mregs;
 	do {
 		if (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_HM)

drivers/usb/musb-new/omap2430.c

@@ -400,7 +400,11 @@ err1:
 	return status;
 }
 
+#ifndef __UBOOT__
 static void omap2430_musb_enable(struct musb *musb)
+#else
+static int omap2430_musb_enable(struct musb *musb)
+#endif
 {
 #ifndef __UBOOT__
 	u8		devctl;
@@ -445,6 +449,7 @@ static void omap2430_musb_enable(struct musb *musb)
 				__PRETTY_FUNCTION__);
 	}
 #endif
+	return 0;
 #endif
 }
 

drivers/usb/musb-new/sunxi.c

@@ -199,12 +199,12 @@ static irqreturn_t sunxi_musb_interrupt(int irq, void *__hci)
 /* musb_core does not call enable / disable in a balanced manner <sigh> */
 static bool enabled = false;
 
-static void sunxi_musb_enable(struct musb *musb)
+static int sunxi_musb_enable(struct musb *musb)
 {
 	pr_debug("%s():\n", __func__);
 
 	if (enabled)
-		return;
+		return 0;
 
 	/* select PIO mode */
 	musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
@@ -215,6 +215,7 @@ static void sunxi_musb_enable(struct musb *musb)
 	USBC_ForceVbusValidToHigh(musb->mregs);
 
 	enabled = true;
+	return 0;
 }
 
 static void sunxi_musb_disable(struct musb *musb)