brain-hackers_pepepper-mirror
/
u-boot-brain
mirror of https://github.com/brain-hackers/u-boot-brain
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Samsung sound patches (applied for Samsung maintainer) 

Common sound support
 buildman environment support
 of-platdata documentation improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAlxf7igRHHNqZ0BjaHJv
 bWl1bS5vcmcACgkQfxc6PpAIreYKfggApQiL0Gv6NdGAQN+zfpjKY5a2QyjKsAxa
 KLm3q8XyXIQXufMWOEPoW1iWm0iixpIFgChy8ff3m/OPDzsx99UXDTyvjitsSxtQ
 5tFu8K78nUZT6OOE3HNhhlyW/xK442oKBzGt4MUt3kUZOELsCNuftgbJUWksHuO3
 6pPrgt36E0uRGbUA4ioYCU336viJRPOOCdqb8hHViEihFj/IEv5T82RdE5y97YxG
 dT7BZxjPkBH5ZN1uD/tdxG1k6IZBagZiYoDAsYp4YqNwmVsm5sLrZ9QVSf7EcH/y
 qX8butZesiMd7xm7RROlrIImh7fb36N3zsoRiUWZDo1Al3IRkmZyVA==
 =tdut
 -----END PGP SIGNATURE-----

Merge tag 'dm-pull-10feb19' of git://git.denx.de/u-boot-dm

Samsung sound patches (applied for Samsung maintainer)
Common sound support
buildman environment support
of-platdata documentation improvements
This commit is contained in:
Tom Rini 2019-02-10 08:11:32 -05:00
parent 2e8560797f afcd645794
commit 151b8339cc
42 changed files with 829 additions and 240 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

77
arch/arm/dts/exynos5250-spring.dts
View File

@ -40,9 +40,46 @@
reg = <0x40000000 0x80000000>;
};
iram {
reg = <0x02020000 0x60000>;
};
config {
samsung,bl1-offset = <0x1400>;
samsung,bl2-offset = <0x3400>;
u-boot-memory = "/memory";
u-boot-offset = <0x3e00000 0x100000>;
};
flash@0 {
spl { /* spl size override */
size = <0x8000>;
reg = <0 0x100000>;
#address-cells = <1>;
#size-cells = <1>;
pre-boot {
label = "bl1 pre-boot";
reg = <0 0x2000>;
read-only;
filename = "e5250.nbl1.bin";
type = "blob exynos-bl1";
required;
};
spl {
label = "bl2 spl";
reg = <0x2000 0x8000>;
read-only;
filename = "bl2.bin";
type = "blob exynos-bl2 boot,dtb";
payload = "/flash/ro-boot";
required;
};
ro-boot {
label = "u-boot";
reg = <0xa000 0xb0000>;
read-only;
type = "blob boot,dtb";
required;
};
};
@ -93,6 +130,22 @@
samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
};
sound {
compatible = "google,spring-audio-max98088";
samsung,model = "Spring-I2S-MAX98088";
samsung,audio-codec = <&max98088>;
codec-enable-gpio = <&gpx1 7 0>;
cpu {
sound-dai = <&i2s1 0>;
};
codec {
sound-dai = <&max98088 0>;
};
};
spi@12d30000 {
spi-max-frequency = <50000000>;
firmware_storage_spi: flash@0 {
@ -638,27 +691,11 @@
};
};
max98095: soundcodec@10 {
max98088: soundcodec@10 {
reg = <0x10>;
compatible = "maxim,max98095";
compatible = "maxim,max98088";
#sound-dai-cells = <1>;
};
sound {
compatible = "google,spring-audio-max98095";
samsung,model = "Spring-I2S-MAX98095";
samsung,audio-codec = <&max98095>;
cpu {
sound-dai = <&i2s0 0>;
};
codec {
sound-dai = <&max98095 0>;
};
};
};
#include "cros-ec-keyboard.dtsi"

7
arch/arm/mach-exynos/Kconfig
View File

@ -8,6 +8,8 @@ config ARCH_EXYNOS4
bool "Exynos4 SoC family"
select BOARD_EARLY_INIT_F
select CPU_V7A
select BLK
select DM_MMC
help
Samsung Exynos4 SoC family are based on ARM Cortex-A9 CPU. There
are multiple SoCs in this family including Exynos4210, Exynos4412,
@ -24,6 +26,9 @@ config ARCH_EXYNOS5
imply USB_ETHER_ASIX
imply USB_ETHER_RTL8152
imply USB_ETHER_SMSC95XX
select BLK
select DM_MMC
help
Samsung Exynos5 SoC family are based on ARM Cortex-A15 CPU (and
Cortex-A7 CPU in big.LITTLE configuration). There are multiple SoCs
@ -33,6 +38,8 @@ config ARCH_EXYNOS7
bool "Exynos7 SoC family"
select ARM64
select BOARD_EARLY_INIT_F
select BLK
select DM_MMC
help
Samsung Exynos7 SoC family are based on ARM Cortex-A57 CPU or
Cortex-A53 CPU (and some in a big.LITTLE configuration). There are

2
arch/arm/mach-exynos/include/mach/mmc.h
View File

@ -64,6 +64,4 @@ static inline int s5p_mmc_init(int index, int bus_width)
return s5p_sdhci_init(base, index, bus_width);
}
int exynos_mmc_init(const void *blob);
#endif

2
arch/arm/mach-s5pc1xx/Kconfig
View File

@ -7,6 +7,8 @@ choice
config TARGET_S5P_GONI
bool "S5P Goni board"
select OF_CONTROL
select BLK
select DM_MMC
config TARGET_SMDKC100
bool "Support smdkc100 board"

1
arch/arm/mach-s5pc1xx/Makefile
View File

@ -10,3 +10,4 @@ obj-y = cache.o
obj-y += reset.o
obj-y += clock.o
obj-y += pinmux.o

20
arch/arm/mach-s5pc1xx/pinmux.c Normal file
View File

@ -0,0 +1,20 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Dummy functions to keep s5p_goni building (although it won't work)
*
* Copyright 2018 Google LLC
* Written by Simon Glass <sjg@chromium.org>
*/
#include <common.h>
#include <asm/arch/pinmux.h>
int exynos_pinmux_config(int peripheral, int flags)
{
return 0;
}
int pinmux_decode_periph_id(const void *blob, int node)
{
return 0;
}

52
board/samsung/common/board.c
View File

@ -249,56 +249,16 @@ int board_eth_init(bd_t *bis)
return 0;
}
#ifdef CONFIG_MMC
static int init_mmc(void)
{
#ifdef CONFIG_MMC_SDHCI
return exynos_mmc_init(gd->fdt_blob);
#else
return 0;
#endif
}
static int init_dwmmc(void)
{
#ifdef CONFIG_MMC_DW
return exynos_dwmmc_init(gd->fdt_blob);
#else
return 0;
#endif
}
int board_mmc_init(bd_t *bis)
{
int ret;
if (get_boot_mode() == BOOT_MODE_SD) {
ret = init_mmc();
ret |= init_dwmmc();
} else {
ret = init_dwmmc();
ret |= init_mmc();
}
if (ret)
debug("mmc init failed\n");
return ret;
}
#endif
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
const char *board_info;
if (IS_ENABLED(CONFIG_BOARD_TYPES)) {
const char *board_info = get_board_type();
if (board_info)
printf("Type: %s\n", board_info);
}
board_info = fdt_getprop(gd->fdt_blob, 0, "model", NULL);
printf("Board: %s\n", board_info ? board_info : "unknown");
#ifdef CONFIG_BOARD_TYPES
board_info = get_board_type();
if (board_info)
printf("Type: %s\n", board_info);
#endif
return 0;
}
#endif

29
board/samsung/common/exynos5-dt.c
View File

@ -34,37 +34,8 @@
DECLARE_GLOBAL_DATA_PTR;
static void board_enable_audio_codec(void)
{
int node, ret;
struct gpio_desc en_gpio;
node = fdtdec_next_compatible(gd->fdt_blob, 0,
COMPAT_SAMSUNG_EXYNOS5_SOUND);
if (node <= 0)
return;
ret = gpio_request_by_name_nodev(offset_to_ofnode(node),
"codec-enable-gpio", 0, &en_gpio,
GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
if (ret == -FDT_ERR_NOTFOUND)
return;
/* Turn on the GPIO which connects to the codec's "enable" line. */
gpio_set_pull(gpio_get_number(&en_gpio), S5P_GPIO_PULL_NONE);
#ifdef CONFIG_SOUND_MAX98095
/* Enable MAX98095 Codec */
gpio_request(EXYNOS5_GPIO_X17, "max98095_enable");
gpio_direction_output(EXYNOS5_GPIO_X17, 1);
gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
#endif
}
int exynos_init(void)
{
board_enable_audio_codec();
return 0;
}

8
common/Kconfig
View File

@ -656,6 +656,14 @@ config BOUNCE_BUFFER
A second possible use of bounce buffers is their ability to
provide aligned buffers for DMA operations.
config BOARD_TYPES
bool "Call get_board_type() to get and display the board type"
help
If this option is enabled, checkboard() will call get_board_type()
to get a string containing the board type and this will be
displayed immediately after the model is shown on the console
early in boot.
menu "Start-up hooks"
config ARCH_EARLY_INIT_R

1
configs/axs101_defconfig
View File

@ -8,6 +8,7 @@ CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS3,115200n8"
CONFIG_BOARD_TYPES=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="AXS# "

1
configs/axs103_defconfig
View File

@ -8,6 +8,7 @@ CONFIG_DEBUG_UART=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS3,115200n8"
CONFIG_BOARD_TYPES=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="AXS# "

1
configs/odroid-xu3_defconfig
View File

@ -2,6 +2,7 @@ CONFIG_ARM=y
CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43E00000
CONFIG_ARCH_EXYNOS5=y
CONFIG_BOARD_TYPES=y
CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=8

1
configs/odroid_defconfig
View File

@ -3,6 +3,7 @@ CONFIG_ARCH_EXYNOS=y
CONFIG_SYS_TEXT_BASE=0x43e00000
CONFIG_ARCH_EXYNOS4=y
CONFIG_TARGET_ODROID=y
CONFIG_BOARD_TYPES=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=8
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set

1
configs/spring_defconfig
View File

@ -62,6 +62,7 @@ CONFIG_DEBUG_UART_S5P=y
CONFIG_SOUND=y
CONFIG_I2S=y
CONFIG_I2S_SAMSUNG=y
CONFIG_SOUND_MAX98088=y
CONFIG_SOUND_MAX98095=y
CONFIG_SOUND_WM8994=y
CONFIG_EXYNOS_SPI=y

31
doc/driver-model/of-plat.txt
View File

@ -64,17 +64,24 @@ strictly necessary. Notable problems include:
normally also supports device tree it must use #ifdef to separate
out this code, since the structures are only available in SPL.
- Correct relations between nodes are not implemented. This means that
parent/child relations (like bus device iteration) do not work yet.
Some phandles (those that are recognised as such) are converted into
a pointer to platform data. This pointer can potentially be used to
access the referenced device (by searching for the pointer value).
This feature is not yet implemented, however.
How it works
------------
The feature is enabled by CONFIG SPL_OF_PLATDATA. This is only available
in SPL and should be tested with:
The feature is enabled by CONFIG OF_PLATDATA. This is only available in
SPL/TPL and should be tested with:
#if CONFIG_IS_ENABLED(SPL_OF_PLATDATA)
#if CONFIG_IS_ENABLED(OF_PLATDATA)
A new tool called 'dtoc' converts a device tree file either into a set of
struct declarations, one for each compatible node, or a set of
struct declarations, one for each compatible node, and a set of
U_BOOT_DEVICE() declarations along with the actual platform data for each
device. As an example, consider this MMC node:
@ -156,6 +163,13 @@ This avoids the code overhead of converting the device tree data to
platform data in the driver. The ofdata_to_platdata() method should
therefore do nothing in such a driver.
Note that for the platform data to be matched with a driver, the 'name'
property of the U_BOOT_DEVICE() declaration has to match a driver declared
via U_BOOT_DRIVER(). This effectively means that a U_BOOT_DRIVER() with a
'name' corresponding to the devicetree 'compatible' string (after converting
it to a valid name for C) is needed, so a dedicated driver is required for
each 'compatible' string.
Where a node has multiple compatible strings, a #define is used to make them
equivalent, e.g.:
@ -165,8 +179,8 @@ equivalent, e.g.:
Converting of-platdata to a useful form
---------------------------------------
Of course it would be possible use the of-platdata directly in your driver
whenever configuration information is required. However this meands that the
Of course it would be possible to use the of-platdata directly in your driver
whenever configuration information is required. However this means that the
driver will not be able to support device tree, since the of-platdata
structure is not available when device tree is used. It would make no sense
to use this structure if device tree were available, since the structure has
@ -282,11 +296,6 @@ prevents them being used inadvertently. All usage must be bracketed with
The dt-platdata.c file contains the device declarations and is is built in
spl/dt-platdata.c.
Some phandles (thsoe that are recognised as such) are converted into
points to platform data. This pointer can potentially be used to access the
referenced device (by searching for the pointer value). This feature is not
yet implemented, however.
The beginnings of a libfdt Python module are provided. So far this only
implements a subset of the features.

3
drivers/misc/misc-uclass.c
View File

@ -68,4 +68,7 @@ int misc_set_enabled(struct udevice *dev, bool val)
UCLASS_DRIVER(misc) = {
.id = UCLASS_MISC,
.name = "misc",
#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
.post_bind = dm_scan_fdt_dev,
#endif
};

16
drivers/mmc/omap_hsmmc.c
View File

@ -471,21 +471,21 @@ static int omap_hsmmc_set_io_regulator(struct mmc *mmc, int mV)
return 0;
/* Disable PBIAS */
ret = regulator_set_enable(priv->pbias_supply, false);
if (ret && ret != -ENOSYS)
ret = regulator_set_enable_if_allowed(priv->pbias_supply, false);
if (ret)
return ret;
/* Turn off IO voltage */
ret = regulator_set_enable(mmc->vqmmc_supply, false);
if (ret && ret != -ENOSYS)
ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, false);
if (ret)
return ret;
/* Program a new IO voltage value */
ret = regulator_set_value(mmc->vqmmc_supply, uV);
if (ret)
return ret;
/* Turn on IO voltage */
ret = regulator_set_enable(mmc->vqmmc_supply, true);
if (ret && ret != -ENOSYS)
ret = regulator_set_enable_if_allowed(mmc->vqmmc_supply, true);
if (ret)
return ret;
/* Program PBIAS voltage*/
@ -493,8 +493,8 @@ static int omap_hsmmc_set_io_regulator(struct mmc *mmc, int mV)
if (ret && ret != -ENOSYS)
return ret;
/* Enable PBIAS */
ret = regulator_set_enable(priv->pbias_supply, true);
if (ret && ret != -ENOSYS)
ret = regulator_set_enable_if_allowed(priv->pbias_supply, true);
if (ret)
return ret;
return 0;

50
drivers/mmc/s5p_sdhci.c
View File

@ -118,9 +118,6 @@ int s5p_sdhci_init(u32 regbase, int index, int bus_width)
return s5p_sdhci_core_init(host);
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
static int do_sdhci_init(struct sdhci_host *host)
{
int dev_id, flag, ret;
@ -191,53 +188,6 @@ static int sdhci_get_config(const void *blob, int node, struct sdhci_host *host)
return 0;
}
static int process_nodes(const void *blob, int node_list[], int count)
{
struct sdhci_host *host;
int i, node, ret;
int failed = 0;
debug("%s: count = %d\n", __func__, count);
/* build sdhci_host[] for each controller */
for (i = 0; i < count; i++) {
node = node_list[i];
if (node <= 0)
continue;
host = &sdhci_host[i];
ret = sdhci_get_config(blob, node, host);
if (ret) {
printf("%s: failed to decode dev %d (%d)\n", __func__, i, ret);
failed++;
continue;
}
ret = do_sdhci_init(host);
if (ret && ret != -ENODEV) {
printf("%s: failed to initialize dev %d (%d)\n", __func__, i, ret);
failed++;
}
}
/* we only consider it an error when all nodes fail */
return (failed == count ? -1 : 0);
}
int exynos_mmc_init(const void *blob)
{
int count;
int node_list[SDHCI_MAX_HOSTS];
count = fdtdec_find_aliases_for_id(blob, "mmc",
COMPAT_SAMSUNG_EXYNOS_MMC, node_list,
SDHCI_MAX_HOSTS);
return process_nodes(blob, node_list, count);
}
#endif
#ifdef CONFIG_DM_MMC
static int s5p_sdhci_probe(struct udevice *dev)
{

13
drivers/power/regulator/regulator-uclass.c
View File

@ -113,11 +113,22 @@ int regulator_set_enable(struct udevice *dev, bool enable)
uc_pdata = dev_get_uclass_platdata(dev);
if (!enable && uc_pdata->always_on)
return 0;
return -EACCES;
return ops->set_enable(dev, enable);
}
int regulator_set_enable_if_allowed(struct udevice *dev, bool enable)
{
int ret;
ret = regulator_set_enable(dev, enable);
if (ret == -ENOSYS || ret == -EACCES)
return 0;
return ret;
}
int regulator_get_mode(struct udevice *dev)
{
const struct dm_regulator_ops *ops = dev_get_driver_ops(dev);

14
drivers/sound/Kconfig
View File

@ -32,7 +32,7 @@ config I2S_ROCKCHIP
config I2S_SAMSUNG
bool "Enable I2C support for Samsung SoCs"
depends on SOUND
depends on I2S
help
Samsung Exynos SoCs support an I2S interface for sending audio
data to an audio codec. This option enables support for this,
@ -40,9 +40,17 @@ config I2S_SAMSUNG
option provides an implementation for sound_init() and
sound_play().
config SOUND_MAX98088
bool "Support Maxim max98088 audio codec"
depends on I2S
help
Enable the max98088 audio codec. This is connected via I2S for
audio data and I2C for codec control. At present it only works
with the Samsung I2S driver.
config SOUND_MAX98090
bool "Support Maxim max98090 audio codec"
depends on I2S_SAMSUNG
depends on I2S
help
Enable the max98090 audio codec. This is connected via I2S for
audio data and I2C for codec control. At present it only works
@ -50,7 +58,7 @@ config SOUND_MAX98090
config SOUND_MAX98095
bool "Support Maxim max98095 audio codec"
depends on I2S_SAMSUNG
depends on I2S
help
Enable the max98095 audio codec. This is connected via I2S for
audio data and I2C for codec control. At present it only works

1
drivers/sound/Makefile
View File

@ -12,5 +12,6 @@ obj-$(CONFIG_SOUND_SANDBOX) += sandbox.o
obj-$(CONFIG_I2S_ROCKCHIP) += rockchip_i2s.o rockchip_sound.o
obj-$(CONFIG_I2S_SAMSUNG) += samsung_sound.o
obj-$(CONFIG_SOUND_WM8994) += wm8994.o
obj-$(CONFIG_SOUND_MAX98088) += max98088.o maxim_codec.o
obj-$(CONFIG_SOUND_MAX98090) += max98090.o maxim_codec.o
obj-$(CONFIG_SOUND_MAX98095) += max98095.o maxim_codec.o

424
drivers/sound/max98088.c Normal file
View File

@ -0,0 +1,424 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* max98088.c -- MAX98088 ALSA SoC Audio driver
*
* Copyright 2010 Maxim Integrated Products
*
* Modified for U-Boot by Chih-Chung Chang (chihchung@chromium.org),
* following the changes made in max98095.c
*/
#include <common.h>
#include <audio_codec.h>
#include <div64.h>
#include <dm.h>
#include <i2c.h>
#include <i2s.h>
#include <sound.h>
#include <asm/gpio.h>
#include "maxim_codec.h"
#include "max98088.h"
/* codec mclk clock divider coefficients. Index 0 is reserved. */
static const int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000,
44100, 48000, 88200, 96000};
/*
* codec mclk clock divider coefficients based on sampling rate
*
* @param rate sampling rate
* @param value address of indexvalue to be stored
*
* @return 0 for success or negative error code.
*/
static int rate_value(int rate, u8 *value)
{
int i;
for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
if (rate_table[i] >= rate) {
*value = i;
return 0;
}
}
*value = 1;
return -EINVAL;
}
/*
* Sets hw params for max98088
*
* @priv: max98088 information pointer
* @rate: Sampling rate
* @bits_per_sample: Bits per sample
*
* @return -EIO for error, 0 for success.
*/
int max98088_hw_params(struct maxim_priv *priv, unsigned int rate,
unsigned int bits_per_sample)
{
int error;
u8 regval;
switch (bits_per_sample) {
case 16:
error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
M98088_DAI_WS, 0);
break;
case 24:
error = maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
M98088_DAI_WS, M98088_DAI_WS);
break;
default:
debug("%s: Illegal bits per sample %d.\n",
__func__, bits_per_sample);
return -EINVAL;
}
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN, 0);
if (rate_value(rate, &regval)) {
debug("%s: Failed to set sample rate to %d.\n",
__func__, rate);
return -EIO;
}
error |= maxim_bic_or(priv, M98088_REG_DAI1_CLKMODE,
M98088_CLKMODE_MASK, regval << 4);
priv->rate = rate;
/* Update sample rate mode */
if (rate < 50000)
error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
M98088_DAI_DHF, 0);
else
error |= maxim_bic_or(priv, M98088_REG_DAI1_FILTERS,
M98088_DAI_DHF, M98088_DAI_DHF);
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS, M98088_SHDNRUN,
M98088_SHDNRUN);
if (error < 0) {
debug("%s: Error setting hardware params.\n", __func__);
return -EIO;
}
priv->rate = rate;
return 0;
}
/*
* Configures Audio interface system clock for the given frequency
*
* @priv: max98088 information
* @freq: Sampling frequency in Hz
*
* @return -EIO for error, 0 for success.
*/
int max98088_set_sysclk(struct maxim_priv *priv, unsigned int freq)
{
int error = 0;
u8 pwr;
/* Requested clock frequency is already setup */
if (freq == priv->sysclk)
return 0;
/*
* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 30MHz)..
*/
if (freq >= 10000000 && freq < 20000000) {
error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x10);
} else if ((freq >= 20000000) && (freq < 30000000)) {
error = maxim_i2c_write(priv, M98088_REG_SYS_CLK, 0x20);
} else {
debug("%s: Invalid master clock frequency\n", __func__);
return -EIO;
}
error |= maxim_i2c_read(priv, M98088_REG_PWR_SYS, &pwr);
if (pwr & M98088_SHDNRUN) {
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
M98088_SHDNRUN, 0);
error |= maxim_bic_or(priv, M98088_REG_PWR_SYS,
M98088_SHDNRUN, M98088_SHDNRUN);
}
debug("%s: Clock at %uHz\n", __func__, freq);
if (error < 0)
return -EIO;
priv->sysclk = freq;
return 0;
}
/*
* Sets Max98090 I2S format
*
* @priv: max98088 information
* @fmt: i2S format - supports a subset of the options defined in i2s.h.
*
* @return -EIO for error, 0 for success.
*/
int max98088_set_fmt(struct maxim_priv *priv, int fmt)
{
u8 reg15val;
u8 reg14val = 0;
int error = 0;
if (fmt == priv->fmt)
return 0;
priv->fmt = fmt;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBS_CFS:
/* Slave mode PLL */
error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_HI,
0x80);
error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLKCFG_LO,
0x00);
break;
case SND_SOC_DAIFMT_CBM_CFM:
/* Set to master mode */
reg14val |= M98088_DAI_MAS;
break;
case SND_SOC_DAIFMT_CBS_CFM:
case SND_SOC_DAIFMT_CBM_CFS:
default:
debug("%s: Clock mode unsupported\n", __func__);
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
reg14val |= M98088_DAI_DLY;
break;
case SND_SOC_DAIFMT_LEFT_J:
break;
default:
debug("%s: Unrecognized format.\n", __func__);
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_NB_IF:
reg14val |= M98088_DAI_WCI;
break;
case SND_SOC_DAIFMT_IB_NF:
reg14val |= M98088_DAI_BCI;
break;
case SND_SOC_DAIFMT_IB_IF:
reg14val |= M98088_DAI_BCI | M98088_DAI_WCI;
break;
default:
debug("%s: Unrecognized inversion settings.\n", __func__);
return -EINVAL;
}
error |= maxim_bic_or(priv, M98088_REG_DAI1_FORMAT,
M98088_DAI_MAS | M98088_DAI_DLY | M98088_DAI_BCI |
M98088_DAI_WCI, reg14val);
reg15val = M98088_DAI_BSEL64;
error |= maxim_i2c_write(priv, M98088_REG_DAI1_CLOCK, reg15val);
if (error < 0) {
debug("%s: Error setting i2s format.\n", __func__);
return -EIO;
}
return 0;
}
/*
* max98088_reset() - reset the audio codec
*
* @priv: max98088 information
* @return -EIO for error, 0 for success.
*/
static int max98088_reset(struct maxim_priv *priv)
{
int ret, i;
u8 val;
/*
* Reset to hardware default for registers, as there is not a soft
* reset hardware control register.
*/
for (i = M98088_REG_IRQ_ENABLE; i <= M98088_REG_PWR_SYS; i++) {
switch (i) {
case M98088_REG_BIAS_CNTL:
val = 0xf0;
break;
case M98088_REG_DAC_BIAS2:
val = 0x0f;
break;
default:
val = 0;
}
ret = maxim_i2c_write(priv, i, val);
if (ret < 0) {
debug("%s: Failed to reset: %d\n", __func__, ret);
return ret;
}
}
return 0;
}
/**
* max98088_device_init() - Initialise max98088 codec device
*
* @priv: max98088 information
*
* @return -EIO for error, 0 for success.
*/
static int max98088_device_init(struct maxim_priv *priv)
{
unsigned char id;
int error = 0;
/* reset the codec, the DSP core, and disable all interrupts */
error = max98088_reset(priv);
if (error != 0) {
debug("Reset\n");
return error;
}
/* initialize private data */
priv->sysclk = -1U;
priv->rate = -1U;
priv->fmt = -1U;
error = maxim_i2c_read(priv, M98088_REG_REV_ID, &id);
if (error < 0) {
debug("%s: Failure reading hardware revision: %d\n",
__func__, id);
return -EIO;
}
debug("%s: Hardware revision: %d\n", __func__, id);
return 0;
}
static int max98088_setup_interface(struct maxim_priv *priv)
{
int error;
/* Reading interrupt status to clear them */
error = maxim_i2c_write(priv, M98088_REG_PWR_SYS, M98088_PWRSV);
error |= maxim_i2c_write(priv, M98088_REG_IRQ_ENABLE, 0x00);
/*
* initialize registers to hardware default configuring audio
* interface2 to DAI1
*/
error |= maxim_i2c_write(priv, M98088_REG_MIX_DAC,
M98088_DAI1L_TO_DACL | M98088_DAI1R_TO_DACR);
error |= maxim_i2c_write(priv, M98088_REG_BIAS_CNTL, 0xF0);
error |= maxim_i2c_write(priv, M98088_REG_DAC_BIAS2, 0x0F);
error |= maxim_i2c_write(priv, M98088_REG_DAI1_IOCFG,
M98088_S2NORMAL | M98088_SDATA);
/*
* route DACL and DACR output to headphone and speakers
* Ordering: DACL, DACR, DACL, DACR
*/
error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_LEFT, 1);
error |= maxim_i2c_write(priv, M98088_REG_MIX_SPK_RIGHT, 1);
error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_LEFT, 1);
error |= maxim_i2c_write(priv, M98088_REG_MIX_HP_RIGHT, 1);
/* set volume: -12db */
error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_L, 0x0f);
error |= maxim_i2c_write(priv, M98088_REG_LVL_SPK_R, 0x0f);
/* set volume: -22db */
error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_L, 0x0d);
error |= maxim_i2c_write(priv, M98088_REG_LVL_HP_R, 0x0d);
/* power enable */
error |= maxim_i2c_write(priv, M98088_REG_PWR_EN_OUT,
M98088_HPLEN | M98088_HPREN | M98088_SPLEN |
M98088_SPREN | M98088_DALEN | M98088_DAREN);
if (error < 0)
return -EIO;
return 0;
}
static int max98088_do_init(struct maxim_priv *priv, int sampling_rate,
int mclk_freq, int bits_per_sample)
{
int ret = 0;
ret = max98088_setup_interface(priv);
if (ret < 0) {
debug("%s: max98088 setup interface failed\n", __func__);
return ret;
}
ret = max98088_set_sysclk(priv, mclk_freq);
if (ret < 0) {
debug("%s: max98088 codec set sys clock failed\n", __func__);
return ret;
}
ret = max98088_hw_params(priv, sampling_rate, bits_per_sample);
if (ret == 0) {
ret = max98088_set_fmt(priv, SND_SOC_DAIFMT_I2S |
SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS);
}
return ret;
}
static int max98088_set_params(struct udevice *dev, int interface, int rate,
int mclk_freq, int bits_per_sample,
uint channels)
{
struct maxim_priv *priv = dev_get_priv(dev);
return max98088_do_init(priv, rate, mclk_freq, bits_per_sample);
}
static int max98088_probe(struct udevice *dev)
{
struct maxim_priv *priv = dev_get_priv(dev);
int ret;
priv->dev = dev;
ret = max98088_device_init(priv);
if (ret < 0) {
debug("%s: max98088 codec chip init failed\n", __func__);
return ret;
}
return 0;
}
static const struct audio_codec_ops max98088_ops = {
.set_params = max98088_set_params,
};
static const struct udevice_id max98088_ids[] = {
{ .compatible = "maxim,max98088" },
{ }
};
U_BOOT_DRIVER(max98088) = {
.name = "max98088",
.id = UCLASS_AUDIO_CODEC,
.of_match = max98088_ids,
.probe = max98088_probe,
.ops = &max98088_ops,
.priv_auto_alloc_size = sizeof(struct maxim_priv),
};

192
drivers/sound/max98088.h Normal file
View File

@ -0,0 +1,192 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* max98088.h -- MAX98088 ALSA SoC Audio driver
*
* Copyright 2010 Maxim Integrated Products
*/
#ifndef _MAX98088_H
#define _MAX98088_H
/* MAX98088 Registers Definition */
#define M98088_REG_IRQ_STATUS 0x00
#define M98088_REG_MIC_STATUS 0x01
#define M98088_REG_JACK_STAUS 0x02
#define M98088_REG_BATTERY_VOLTAGE 0x03
#define M98088_REG_IRQ_ENABLE 0x0f
#define M98088_REG_SYS_CLK 0X10
#define M98088_REG_DAI1_CLKMODE 0x11
#define M98088_REG_DAI1_CLKCFG_HI 0x12
#define M98088_REG_DAI1_CLKCFG_LO 0x13
#define M98088_REG_DAI1_FORMAT 0x14
#define M98088_REG_DAI1_CLOCK 0x15
#define M98088_REG_DAI1_IOCFG 0x16
#define M98088_REG_DAI1_TDM 0X17
#define M98088_REG_DAI1_FILTERS 0x18
#define M98088_REG_DAI2_CLKMODE 0x19
#define M98088_REG_DAI2_CLKCFG_HI 0x1a
#define M98088_REG_DAI2_CLKCFG_LO 0x1b
#define M98088_REG_DAI2_FORMAT 0x1c
#define M98088_REG_DAI2_CLOCK 0x1d
#define M98088_REG_DAI2_IOCFG 0x1e
#define M98088_REG_DAI2_TDM 0X1f
#define M98088_REG_DAI2_FILTERS 0x20
#define M98088_REG_SRC 0X21
#define M98088_REG_MIX_DAC 0X22
#define M98088_REG_MIX_ADC_LEFT 0x23
#define M98088_REG_MIX_ADC_RIGHT 0x24
#define M98088_REG_MIX_HP_LEFT 0x25
#define M98088_REG_MIX_HP_RIGHT 0x26
#define M98088_REG_MIX_HP_CNTL 0x27
#define M98088_REG_MIX_REC_LEFT 0x28
#define M98088_REG_MIX_REC_RIGHT 0x29
#define M98088_REG_MIC_REC_CNTL 0x2a
#define M98088_REG_MIX_SPK_LEFT 0x2b
#define M98088_REG_MIX_SPK_RIGHT 0x2c
#define M98088_REG_MIX_SPK_CNTL 0x2d
#define M98088_REG_LVL_SIDETONE 0x2e
#define M98088_REG_LVL_DAI1_PLAY 0x2f
#define M98088_REG_LVL_DAI1_PLAY_EQ 0x30
#define M98088_REG_LVL_DAI2_PLAY 0x31
#define M98088_REG_LVL_DAI2_PLAY_EQ 0x32
#define M98088_REG_LVL_ADC_L 0X33
#define M98088_REG_LVL_ADC_R 0X34
#define M98088_REG_LVL_MIC1 0X35
#define M98088_REG_LVL_MIC2 0X36
#define M98088_REG_LVL_INA 0X37
#define M98088_REG_LVL_INB 0X38
#define M98088_REG_LVL_HP_L 0X39
#define M98088_REG_LVL_HP_R 0X3a
#define M98088_REG_LVL_REC_L 0X3b
#define M98088_REG_LVL_REC_R 0X3c
#define M98088_REG_LVL_SPK_L 0X3d
#define M98088_REG_LVL_SPK_R 0X3e
#define M98088_REG_MICAGC_CFG 0x3f
#define M98088_REG_MICAGC_THRESH 0x40
#define M98088_REG_SPKDHP 0X41
#define M98088_REG_SPKDHP_THRESH 0x42
#define M98088_REG_SPKALC_COMP 0x43
#define M98088_REG_PWRLMT_CFG 0x44
#define M98088_REG_PWRLMT_TIME 0x45
#define M98088_REG_THDLMT_CFG 0x46
#define M98088_REG_CFG_AUDIO_IN 0x47
#define M98088_REG_CFG_MIC 0X48
#define M98088_REG_CFG_LEVEL 0X49
#define M98088_REG_CFG_BYPASS 0x4a
#define M98088_REG_CFG_JACKDET 0x4b
#define M98088_REG_PWR_EN_IN 0X4c
#define M98088_REG_PWR_EN_OUT 0x4d
#define M98088_REG_BIAS_CNTL 0X4e
#define M98088_REG_DAC_BIAS1 0X4f
#define M98088_REG_DAC_BIAS2 0X50
#define M98088_REG_PWR_SYS 0X51
#define M98088_REG_DAI1_EQ_BASE 0x52
#define M98088_REG_DAI2_EQ_BASE 0x84
#define M98088_REG_DAI1_BIQUAD_BASE 0xb6
#define M98088_REG_DAI2_BIQUAD_BASE 0xc0
#define M98088_REG_REV_ID 0xff
#define M98088_REG_CNT (0xff + 1)
/* MAX98088 Registers Bit Fields */
/* M98088_REG_11_DAI1_CLKMODE, M98088_REG_19_DAI2_CLKMODE */
#define M98088_CLKMODE_MASK 0xFF
/* M98088_REG_14_DAI1_FORMAT, M98088_REG_1C_DAI2_FORMAT */
#define M98088_DAI_MAS BIT(7)
#define M98088_DAI_WCI BIT(6)
#define M98088_DAI_BCI BIT(5)
#define M98088_DAI_DLY BIT(4)
#define M98088_DAI_TDM BIT(2)
#define M98088_DAI_FSW BIT(1)
#define M98088_DAI_WS BIT(0)
/* M98088_REG_15_DAI1_CLOCK, M98088_REG_1D_DAI2_CLOCK */
#define M98088_DAI_BSEL64 BIT(0)
#define M98088_DAI_OSR64 BIT(6)
/* M98088_REG_16_DAI1_IOCFG, M98088_REG_1E_DAI2_IOCFG */
#define M98088_S1NORMAL BIT(6)
#define M98088_S2NORMAL (2 << 6)
#define M98088_SDATA (3 << 0)
/* M98088_REG_18_DAI1_FILTERS, M98088_REG_20_DAI2_FILTERS */
#define M98088_DAI_DHF BIT(3)
/* M98088_REG_22_MIX_DAC */
#define M98088_DAI1L_TO_DACL BIT(7)
#define M98088_DAI1R_TO_DACL BIT(6)
#define M98088_DAI2L_TO_DACL BIT(5)
#define M98088_DAI2R_TO_DACL BIT(4)
#define M98088_DAI1L_TO_DACR BIT(3)
#define M98088_DAI1R_TO_DACR BIT(2)
#define M98088_DAI2L_TO_DACR BIT(1)
#define M98088_DAI2R_TO_DACR BIT(0)
/* M98088_REG_2A_MIC_REC_CNTL */
#define M98088_REC_LINEMODE BIT(7)
#define M98088_REC_LINEMODE_MASK BIT(7)
/* M98088_REG_2D_MIX_SPK_CNTL */
#define M98088_MIX_SPKR_GAIN_MASK (3 << 2)
#define M98088_MIX_SPKR_GAIN_SHIFT 2
#define M98088_MIX_SPKL_GAIN_MASK (3 << 0)
#define M98088_MIX_SPKL_GAIN_SHIFT 0
/* M98088_REG_2F_LVL_DAI1_PLAY, M98088_REG_31_LVL_DAI2_PLAY */
#define M98088_DAI_MUTE BIT(7)
#define M98088_DAI_MUTE_MASK BIT(7)
#define M98088_DAI_VOICE_GAIN_MASK (3 << 4)
#define M98088_DAI_ATTENUATION_MASK (0xf << 0)
#define M98088_DAI_ATTENUATION_SHIFT 0
/* M98088_REG_35_LVL_MIC1, M98088_REG_36_LVL_MIC2 */
#define M98088_MICPRE_MASK (3 << 5)
#define M98088_MICPRE_SHIFT 5
/* M98088_REG_3A_LVL_HP_R */
#define M98088_HP_MUTE BIT(7)
/* M98088_REG_3C_LVL_REC_R */
#define M98088_REC_MUTE BIT(7)
/* M98088_REG_3E_LVL_SPK_R */
#define M98088_SP_MUTE BIT(7)
/* M98088_REG_48_CFG_MIC */
#define M98088_EXTMIC_MASK (3 << 0)
#define M98088_DIGMIC_L BIT(5)
#define M98088_DIGMIC_R BIT(4)
/* M98088_REG_49_CFG_LEVEL */
#define M98088_VSEN BIT(6)
#define M98088_ZDEN BIT(5)
#define M98088_EQ2EN BIT(1)
#define M98088_EQ1EN BIT(0)
/* M98088_REG_4C_PWR_EN_IN */
#define M98088_INAEN BIT(7)
#define M98088_INBEN BIT(6)
#define M98088_MBEN BIT(3)
#define M98088_ADLEN BIT(1)
#define M98088_ADREN BIT(0)
/* M98088_REG_4D_PWR_EN_OUT */
#define M98088_HPLEN BIT(7)
#define M98088_HPREN BIT(6)
#define M98088_HPEN (BIT(7) | BIT(6))
#define M98088_SPLEN BIT(5)
#define M98088_SPREN BIT(4)
#define M98088_RECEN BIT(3)
#define M98088_DALEN BIT(1)
#define M98088_DAREN BIT(0)
/* M98088_REG_51_PWR_SYS */
#define M98088_SHDNRUN BIT(7)
#define M98088_PERFMODE BIT(3)
#define M98088_HPPLYBACK BIT(2)
#define M98088_PWRSV8K BIT(1)
#define M98088_PWRSV BIT(0)
#endif

7
drivers/sound/max98090.c
View File

@ -13,10 +13,6 @@
#include <i2s.h>
#include <sound.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/power.h>
#include "maxim_codec.h"
#include "max98090.h"
@ -240,9 +236,6 @@ int max98090_device_init(struct maxim_priv *priv)
unsigned char id;
int error = 0;
/* Enable codec clock */
set_xclkout();
/* reset the codec, the DSP core, and disable all interrupts */
error = max98090_reset(priv);
if (error != 0) {

7
drivers/sound/max98095.c
View File

@ -15,10 +15,6 @@
#include <i2c.h>
#include <sound.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/power.h>
#include "i2s.h"
#include "max98095.h"
@ -306,9 +302,6 @@ static int max98095_device_init(struct maxim_priv *priv)
unsigned char id;
int ret;
/* Enable codec clock */
set_xclkout();
/* reset the codec, the DSP core, and disable all interrupts */
ret = max98095_reset(priv);
if (ret != 0) {

3
drivers/sound/maxim_codec.c
View File

@ -12,9 +12,6 @@
#include <sound.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
#include <asm/arch/power.h>
#include "maxim_codec.h"
/*

16
drivers/sound/samsung-i2s.c
View File

@ -24,7 +24,7 @@
/*
* Sets the frame size for I2S LR clock
*
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
* @param rfs Frame Size
*/
static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
@ -54,7 +54,7 @@ static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
/*
* Sets the i2s transfer control
*
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
* @param on 1 enable tx , 0 disable tx transfer
*/
static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
@ -77,7 +77,7 @@ static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
/*
* set the bit clock frame size (in multiples of LRCLK)
*
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
* @param bfs bit Frame Size
*/
static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
@ -108,7 +108,7 @@ static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
/*
* flushes the i2stx fifo
*
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
* @param flush Tx fifo flush command (0x00 - do not flush
* 0x80 - flush tx fifo)
*/
@ -122,7 +122,7 @@ static void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
/*
* Set System Clock direction
*
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
* @param dir Clock direction
*
* @return int value 0 for success, -1 in case of error
@ -145,7 +145,7 @@ static int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
* Sets I2S Clcok format
*
* @param fmt i2s clock properties
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
*
* @return int value 0 for success, -1 in case of error
*/
@ -222,7 +222,7 @@ static int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
* Sets the sample width in bits
*
* @param blc samplewidth (size of sample in bits)
* @param i2s_reg i2s regiter address
* @param i2s_reg i2s register address
*
* @return int value 0 for success, -1 in case of error
*/
@ -294,7 +294,7 @@ int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data,
return 0;
}
int i2s_tx_init(struct i2s_uc_priv *pi2s_tx)
static int i2s_tx_init(struct i2s_uc_priv *pi2s_tx)
{
int ret;
struct i2s_reg *i2s_reg = (struct i2s_reg *)pi2s_tx->base_address;

6
drivers/sound/samsung_sound.c
View File

@ -10,6 +10,7 @@
#include <i2s.h>
#include <sound.h>
#include <asm/gpio.h>
#include <asm/arch/power.h>
static int samsung_sound_setup(struct udevice *dev)
{
@ -79,6 +80,9 @@ static int samsung_sound_probe(struct udevice *dev)
debug("Probed sound '%s' with codec '%s' and i2s '%s'\n", dev->name,
uc_priv->codec->name, uc_priv->i2s->name);
/* Enable codec clock */
set_xclkout();
return 0;
}
@ -89,7 +93,7 @@ static const struct sound_ops samsung_sound_ops = {
static const struct udevice_id samsung_sound_ids[] = {
{ .compatible = "google,snow-audio-max98095" },
{ .compatible = "google,spring-audio-max98095" },
{ .compatible = "google,spring-audio-max98088" },
{ .compatible = "samsung,smdk5420-audio-wm8994" },
{ .compatible = "google,peach-audio-max98090" },
{ }

6
dts/Kconfig
View File

@ -265,8 +265,7 @@ config SPL_OF_PLATDATA
This option works by generating C structure declarations for each
compatible string, then adding platform data and U_BOOT_DEVICE
declarations for each node. See README.platdata for more
information.
declarations for each node. See of-plat.txt for more information.
config TPL_OF_PLATDATA
bool "Generate platform data for use in TPL"
@ -287,8 +286,7 @@ config TPL_OF_PLATDATA
This option works by generating C structure declarations for each
compatible string, then adding platform data and U_BOOT_DEVICE
declarations for each node. See README.platdata for more
information.
declarations for each node. See of-plat.txt for more information.
endmenu

5
include/configs/axs10x.h
View File

@ -31,11 +31,6 @@
#define CONFIG_SYS_BOOTM_LEN SZ_128M
#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* This board might be of different versions so handle it
*/
#define CONFIG_BOARD_TYPES
/*
* NAND Flash configuration
*/

5
include/configs/hsdk.h
View File

@ -32,11 +32,6 @@
#define CONFIG_SYS_BOOTM_LEN SZ_128M
#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* This board might be of different versions so handle it
*/
#define CONFIG_BOARD_TYPES
/*
* UART configuration
*/

1
include/configs/odroid.h
View File

@ -186,7 +186,6 @@
* TODO: Add Odroid X support
*/
#define CONFIG_MISC_COMMON
#define CONFIG_BOARD_TYPES
#undef CONFIG_REVISION_TAG

1
include/configs/odroid_xu3.h
View File

@ -87,7 +87,6 @@
/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
#define CONFIG_ODROID_REV_AIN 9
#define CONFIG_REVISION_TAG
#define CONFIG_BOARD_TYPES
#undef CONFIG_SYS_BOARD
#define CONFIG_SYS_BOARD "odroid"

7
include/fdtdec.h
View File

@ -133,21 +133,14 @@ enum fdt_compat_id {
/* Tegra210 XUSB pad controller */
COMPAT_SMSC_LAN9215, /* SMSC 10/100 Ethernet LAN9215 */
COMPAT_SAMSUNG_EXYNOS5_SROMC, /* Exynos5 SROMC */
COMPAT_SAMSUNG_S3C2440_I2C, /* Exynos I2C Controller */
COMPAT_SAMSUNG_EXYNOS5_SOUND, /* Exynos Sound */
COMPAT_WOLFSON_WM8994_CODEC, /* Wolfson WM8994 Sound Codec */
COMPAT_SAMSUNG_EXYNOS_USB_PHY, /* Exynos phy controller for usb2.0 */
COMPAT_SAMSUNG_EXYNOS5_USB3_PHY,/* Exynos phy controller for usb3.0 */
COMPAT_SAMSUNG_EXYNOS_TMU, /* Exynos TMU */
COMPAT_SAMSUNG_EXYNOS_MIPI_DSI, /* Exynos mipi dsi */
COMPAT_SAMSUNG_EXYNOS_DWMMC, /* Exynos DWMMC controller */
COMPAT_SAMSUNG_EXYNOS_MMC, /* Exynos MMC controller */
COMPAT_GENERIC_SPI_FLASH, /* Generic SPI Flash chip */
COMPAT_MAXIM_98095_CODEC, /* MAX98095 Codec */
COMPAT_SAMSUNG_EXYNOS5_I2C, /* Exynos5 High Speed I2C Controller */
COMPAT_SAMSUNG_EXYNOS_SYSMMU, /* Exynos sysmmu */
COMPAT_INTEL_MICROCODE, /* Intel microcode update */
COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */
COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */
COMPAT_ALTERA_SOCFPGA_DWMAC, /* SoCFPGA Ethernet controller */
COMPAT_ALTERA_SOCFPGA_DWMMC, /* SoCFPGA DWMMC controller */

11
include/i2s.h
View File

@ -78,7 +78,7 @@ struct i2s_reg {
/* This structure stores the i2s related information */
struct i2s_uc_priv {
unsigned int rfs; /* LR clock frame size */
unsigned int bfs; /* Bit slock frame size */
unsigned int bfs; /* Bit clock frame size */
unsigned int audio_pll_clk; /* Audio pll frequency in Hz */
unsigned int samplingrate; /* sampling rate */
unsigned int bitspersample; /* bits per sample */
@ -123,13 +123,4 @@ int i2s_tx_data(struct udevice *dev, void *data, uint data_size);
int i2s_transfer_tx_data(struct i2s_uc_priv *pi2s_tx, void *data,
uint data_size);
/*
* Initialise i2s transmiter
*
* @param pi2s_tx pointer of i2s transmitter parameter structure.
*
* @return int value 0 for success, -1 in case of error
*/
int i2s_tx_init(struct i2s_uc_priv *pi2s_tx);
#endif /* __I2S_H__ */

11
include/power/regulator.h
View File

@ -303,6 +303,17 @@ int regulator_get_enable(struct udevice *dev);
*/
int regulator_set_enable(struct udevice *dev, bool enable);
/**
* regulator_set_enable_if_allowed: set regulator enable state if allowed by
* regulator
*
* @dev - pointer to the regulator device
* @enable - set true or false
* @return - 0 on success or if enabling is not supported
* -errno val if fails.
*/
int regulator_set_enable_if_allowed(struct udevice *dev, bool enable);
/**
* regulator_get_mode: get active operation mode id of a given regulator
*

2
include/samsung/misc.h
View File

@ -32,9 +32,7 @@ void draw_logo(void);
char *get_dfu_alt_system(char *interface, char *devstr);
char *get_dfu_alt_boot(char *interface, char *devstr);
#endif
#ifdef CONFIG_BOARD_TYPES
void set_board_type(void);
const char *get_board_type(void);
#endif
#endif /* __SAMSUNG_MISC_COMMON_H__ */

7
lib/fdtdec.c
View File

@ -40,21 +40,14 @@ static const char * const compat_names[COMPAT_COUNT] = {
COMPAT(NVIDIA_TEGRA210_XUSB_PADCTL, "nvidia,tegra210-xusb-padctl"),
COMPAT(SMSC_LAN9215, "smsc,lan9215"),
COMPAT(SAMSUNG_EXYNOS5_SROMC, "samsung,exynos-sromc"),
COMPAT(SAMSUNG_S3C2440_I2C, "samsung,s3c2440-i2c"),
COMPAT(SAMSUNG_EXYNOS5_SOUND, "samsung,exynos-sound"),
COMPAT(WOLFSON_WM8994_CODEC, "wolfson,wm8994-codec"),
COMPAT(SAMSUNG_EXYNOS_USB_PHY, "samsung,exynos-usb-phy"),
COMPAT(SAMSUNG_EXYNOS5_USB3_PHY, "samsung,exynos5250-usb3-phy"),
COMPAT(SAMSUNG_EXYNOS_TMU, "samsung,exynos-tmu"),
COMPAT(SAMSUNG_EXYNOS_MIPI_DSI, "samsung,exynos-mipi-dsi"),
COMPAT(SAMSUNG_EXYNOS_DWMMC, "samsung,exynos-dwmmc"),
COMPAT(SAMSUNG_EXYNOS_MMC, "samsung,exynos-mmc"),
COMPAT(GENERIC_SPI_FLASH, "spi-flash"),
COMPAT(MAXIM_98095_CODEC, "maxim,max98095-codec"),
COMPAT(SAMSUNG_EXYNOS5_I2C, "samsung,exynos5-hsi2c"),
COMPAT(SAMSUNG_EXYNOS_SYSMMU, "samsung,sysmmu-v3.3"),
COMPAT(INTEL_MICROCODE, "intel,microcode"),
COMPAT(AMS_AS3722, "ams,as3722"),
COMPAT(INTEL_QRK_MRC, "intel,quark-mrc"),
COMPAT(ALTERA_SOCFPGA_DWMAC, "altr,socfpga-stmmac"),
COMPAT(ALTERA_SOCFPGA_DWMMC, "altr,socfpga-dw-mshc"),

1
scripts/config_whitelist.txt
View File

@ -129,7 +129,6 @@ CONFIG_BOARD_POSTCLK_INIT
CONFIG_BOARD_REVISION_TAG
CONFIG_BOARD_SIZE_LIMIT
CONFIG_BOARD_TAURUS
CONFIG_BOARD_TYPES
CONFIG_BOOGER
CONFIG_BOOTBLOCK
CONFIG_BOOTFILE

21
test/dm/regulator.c
View File

@ -175,6 +175,27 @@ static int dm_test_power_regulator_set_get_enable(struct unit_test_state *uts)
}
DM_TEST(dm_test_power_regulator_set_get_enable, DM_TESTF_SCAN_FDT);
/* Test regulator set and get enable if allowed method */
static
int dm_test_power_regulator_set_enable_if_allowed(struct unit_test_state *uts)
{
const char *platname;
struct udevice *dev, *dev_autoset;
bool val_set = false;
/* Get BUCK1 - always on regulator */
platname = regulator_names[BUCK1][PLATNAME];
ut_assertok(regulator_autoset_by_name(platname, &dev_autoset));
ut_assertok(regulator_get_by_platname(platname, &dev));
/* Try disabling always-on regulator */
ut_assertok(regulator_set_enable_if_allowed(dev, val_set));
ut_asserteq(regulator_get_enable(dev), !val_set);
return 0;
}
DM_TEST(dm_test_power_regulator_set_enable_if_allowed, DM_TESTF_SCAN_FDT);
/* Test regulator set and get mode method */
static int dm_test_power_regulator_set_get_mode(struct unit_test_state *uts)
{

3
tools/buildman/builderthread.py
View File

@ -322,6 +322,9 @@ class BuilderThread(threading.Thread):
# Write out the image and function size information and an objdump
env = result.toolchain.MakeEnvironment(self.builder.full_path)
with open(os.path.join(build_dir, 'env'), 'w') as fd:
for var in sorted(env.keys()):
print >>fd, '%s="%s"' % (var, env[var])
lines = []
for fname in ['u-boot', 'spl/u-boot-spl']:
cmd = ['%snm' % self.toolchain.cross, '--size-sort', fname]

2
tools/buildman/control.py
View File

@ -99,7 +99,7 @@ def CheckOutputDir(output_dir):
cwd_path = os.path.realpath('.')
while True:
if os.path.realpath(path) == cwd_path:
Print("Cannot use output directory '%s' since it is within the current directtory '%s'" %
Print("Cannot use output directory '%s' since it is within the current directory '%s'" %
(path, cwd_path))
sys.exit(1)
parent = os.path.dirname(path)