diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 03b6c86349..5c930d3888 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -299,6 +299,7 @@ void cpu_init_f (volatile immap_t * im)
 	im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
 #endif
 #ifdef CONFIG_USB_EHCI_FSL
+#ifndef CONFIG_MPC834x
 	uint32_t temp;
 	struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
 
@@ -311,6 +312,7 @@ void cpu_init_f (volatile immap_t * im)
 		udelay(1000);
 	} while (!(temp & PHY_CLK_VALID));
 #endif
+#endif
 }
 
 int cpu_init_r (void)
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 7c6a15185e..c60a7d21c3 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -650,6 +650,12 @@ typedef struct immap {
 	u8			res7[0xC0000];
 } immap_t;
 
+#ifdef CONFIG_HAS_FSL_MPH_USB
+#define CONFIG_SYS_MPC83xx_USB_OFFSET  0x22000	/* use the MPH controller */
+#else
+#define CONFIG_SYS_MPC83xx_USB_OFFSET  0x23000	/* use the DR controller */
+#endif
+
 #elif defined(CONFIG_MPC8313)
 typedef struct immap {
 	sysconf83xx_t		sysconf;	/* System configuration */
@@ -856,7 +862,10 @@ typedef struct immap {
 #define CONFIG_SYS_MPC83xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
 #define CONFIG_SYS_MPC83xx_ESDHC_OFFSET	(0x2e000)
 #define CONFIG_SYS_MPC83xx_ESDHC_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET)
-#define CONFIG_SYS_MPC83xx_USB_OFFSET	0x23000
+
+#ifndef CONFIG_SYS_MPC83xx_USB_OFFSET
+#define CONFIG_SYS_MPC83xx_USB_OFFSET  0x23000
+#endif
 #define CONFIG_SYS_MPC83xx_USB_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_USB_OFFSET)
 #endif				/* __IMMAP_83xx__ */
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 2308568695..049c80d6ab 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -211,7 +211,7 @@
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */
 
 /*
@@ -236,6 +236,7 @@
 #define CONFIG_CMD_NAND 1
 #define CONFIG_NAND_FSL_ELBC 1
 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE  (512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST   0x00100000
diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h
index e03a1077ff..4cf48f7bc0 100644
--- a/include/configs/MPC8315ERDB.h
+++ b/include/configs/MPC8315ERDB.h
@@ -226,6 +226,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE	1
 #define CONFIG_CMD_NAND			1
 #define CONFIG_NAND_FSL_ELBC		1
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_BR1_PRELIM	( CONFIG_SYS_NAND_BASE \
 				| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 24f37e7cb2..b5820ceab1 100644
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -156,7 +156,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /*
diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 669577ef10..c4acc05fe1 100644
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -144,7 +144,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)	/* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /*
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
index ea5fbff305..63c6dbcad5 100644
--- a/include/configs/MPC8349EMDS.h
+++ b/include/configs/MPC8349EMDS.h
@@ -201,7 +201,7 @@
 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024)		/* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024)		/* Reserved for malloc */
 
 /*
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
index d4d3256f75..068df57e0a 100644
--- a/include/configs/MPC8349ITX.h
+++ b/include/configs/MPC8349ITX.h
@@ -79,6 +79,7 @@
 #define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
 #define CONFIG_VSC7385_ENET	/* VSC7385 ethernet support */
 #define CONFIG_SATA_SIL3114	/* SIL3114 SATA controller */
+#define CONFIG_SYS_USB_HOST	/* use the EHCI USB controller */
 #endif
 
 #define CONFIG_PCI
@@ -155,6 +156,25 @@
 
 #endif
 
+#ifdef CONFIG_SYS_USB_HOST
+/*
+ * Support USB
+ */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+
+/* Current USB implementation supports the only USB controller,
+ * so we have to choose between the MPH or the DR ones */
+#if 1
+#define CONFIG_HAS_FSL_MPH_USB
+#else
+#define CONFIG_HAS_FSL_DR_USB
+#endif
+
+#endif
+
 /*
  * DDR Setup
  */
@@ -288,7 +308,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*
@@ -456,9 +476,11 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_SDRAM
 
-#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114)
+#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \
+    || defined(CONFIG_USB_STORAGE)
     #define CONFIG_DOS_PARTITION
     #define CONFIG_CMD_FAT
+    #define CONFIG_SUPPORT_VFAT
 #endif
 
 #ifdef CONFIG_COMPACT_FLASH
@@ -467,6 +489,9 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifdef CONFIG_SATA_SIL3114
     #define CONFIG_CMD_SATA
+#endif
+
+#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE)
     #define CONFIG_CMD_EXT2
 #endif
 
@@ -560,12 +585,14 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
 #define CONFIG_SYS_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
 #define CONFIG_SYS_SCCR_TSEC2CM	1	/* TSEC2 & I2C0 clock mode (0-3) */
+#define CONFIG_SYS_SCCR_USBMPHCM 3	/* USB MPH controller's clock */
+#define CONFIG_SYS_SCCR_USBDRCM	0	/* USB DR controller's clock */
 
 /*
  * System IO Config
  */
 #define CONFIG_SYS_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
-#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)
+#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1)	/* USB DR as device + USB MPH as host */
 
 #define CONFIG_SYS_HID0_INIT	0x000000000
 #define CONFIG_SYS_HID0_FINAL	CONFIG_SYS_HID0_INIT
diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h
index 3497ba07e7..60c996841d 100644
--- a/include/configs/MPC8360EMDS.h
+++ b/include/configs/MPC8360EMDS.h
@@ -170,7 +170,7 @@
 #endif
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*
diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h
index f5844356d2..4fcca09e80 100644
--- a/include/configs/MPC8360ERDK.h
+++ b/include/configs/MPC8360ERDK.h
@@ -212,6 +212,7 @@
 #define CONFIG_NAND_FSL_UPM	1
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_LBLAWBAR1_PRELIM	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_LBLAWAR1_PRELIM	0x8000001b /* Access window size 4K */
diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h
index 2b7d62954b..0205c99399 100644
--- a/include/configs/MPC837XERDB.h
+++ b/include/configs/MPC837XERDB.h
@@ -228,7 +228,7 @@
 #undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024) /* Reserved for malloc */
 
 /*
diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 72fe115886..08b401e9cf 100644
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -131,6 +131,7 @@
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 #define CONFIG_CMD_NAND 		1
 #define CONFIG_NAND_FSL_ELBC		1
+#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(512 << 10)
 #define CONFIG_SYS_NAND_U_BOOT_DST	0x00100000
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 19da1337e7..41dbd0d241 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -157,7 +157,7 @@
 #undef	CONFIG_SYS_RAMBOOT
 #endif
 
-#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 256 kB for Mon */
+#define CONFIG_SYS_MONITOR_LEN		(384 * 1024) /* Reserve 384 kB for Mon */
 #define CONFIG_SYS_MALLOC_LEN		(128 * 1024) /* Reserved for malloc */
 
 /*