mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-10 06:43:28 +09:00
Add SPI support to mx51evk board
The patch adds SPI devices to the mx51evk board. The MC13892 chip (PMIC) is supported. Signed-off-by: Stefano Babic <sbabic@denx.de>
This commit is contained in:
parent
f5ce366e1f
commit
0cf7d2440e
@ -27,9 +27,12 @@
|
||||
#include <asm/arch/iomux.h>
|
||||
#include <asm/errno.h>
|
||||
#include <asm/arch/sys_proto.h>
|
||||
#include <asm/arch/crm_regs.h>
|
||||
#include <i2c.h>
|
||||
#include <mmc.h>
|
||||
#include <fsl_esdhc.h>
|
||||
#include <fsl_pmic.h>
|
||||
#include <mc13892.h>
|
||||
#include "mx51evk.h"
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
@ -147,6 +150,130 @@ static void setup_iomux_fec(void)
|
||||
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MXC_SPI
|
||||
static void setup_iomux_spi(void)
|
||||
{
|
||||
/* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
|
||||
mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
|
||||
|
||||
/* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
|
||||
mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
|
||||
|
||||
/* de-select SS1 of instance: ecspi1. */
|
||||
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
|
||||
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
|
||||
|
||||
/* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
|
||||
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
|
||||
|
||||
/* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
|
||||
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
|
||||
|
||||
/* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
|
||||
mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
|
||||
mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
|
||||
}
|
||||
#endif
|
||||
|
||||
static void power_init(void)
|
||||
{
|
||||
unsigned int val;
|
||||
unsigned int reg;
|
||||
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
|
||||
|
||||
/* Write needed to Power Gate 2 register */
|
||||
val = pmic_reg_read(REG_POWER_MISC);
|
||||
val &= ~PWGT2SPIEN;
|
||||
pmic_reg_write(REG_POWER_MISC, val);
|
||||
|
||||
/* Write needed to update Charger 0 */
|
||||
pmic_reg_write(REG_CHARGE, VCHRG0 | VCHRG1 | VCHRG2 |
|
||||
ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | ICHRGTR0 |
|
||||
OVCTRL1 | UCHEN | CHRGLEDEN | CYCLB);
|
||||
|
||||
/* power up the system first */
|
||||
pmic_reg_write(REG_POWER_MISC, PWUP);
|
||||
|
||||
/* Set core voltage to 1.1V */
|
||||
val = pmic_reg_read(REG_SW_0);
|
||||
val = (val & (~0x1F)) | 0x14;
|
||||
pmic_reg_write(REG_SW_0, val);
|
||||
|
||||
/* Setup VCC (SW2) to 1.25 */
|
||||
val = pmic_reg_read(REG_SW_1);
|
||||
val = (val & (~0x1F)) | 0x1A;
|
||||
pmic_reg_write(REG_SW_1, val);
|
||||
|
||||
/* Setup 1V2_DIG1 (SW3) to 1.25 */
|
||||
val = pmic_reg_read(REG_SW_2);
|
||||
val = (val & (~0x1F)) | 0x1A;
|
||||
pmic_reg_write(REG_SW_2, val);
|
||||
udelay(50);
|
||||
|
||||
/* Raise the core frequency to 800MHz */
|
||||
writel(0x0, &mxc_ccm->cacrr);
|
||||
|
||||
/* Set switchers in Auto in NORMAL mode & STANDBY mode */
|
||||
/* Setup the switcher mode for SW1 & SW2*/
|
||||
val = pmic_reg_read(REG_SW_4);
|
||||
val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
|
||||
(SWMODE_MASK << SWMODE2_SHIFT)));
|
||||
val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
|
||||
(SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
|
||||
pmic_reg_write(REG_SW_4, val);
|
||||
|
||||
/* Setup the switcher mode for SW3 & SW4 */
|
||||
val = pmic_reg_read(REG_SW_5);
|
||||
val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
|
||||
(SWMODE_MASK << SWMODE4_SHIFT)));
|
||||
val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
|
||||
(SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
|
||||
pmic_reg_write(REG_SW_5, val);
|
||||
|
||||
/* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
|
||||
val = pmic_reg_read(REG_SETTING_0);
|
||||
val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
|
||||
val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
|
||||
pmic_reg_write(REG_SETTING_0, val);
|
||||
|
||||
/* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
|
||||
val = pmic_reg_read(REG_SETTING_1);
|
||||
val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
|
||||
val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
|
||||
pmic_reg_write(REG_SETTING_1, val);
|
||||
|
||||
/* Configure VGEN3 and VCAM regulators to use external PNP */
|
||||
val = VGEN3CONFIG | VCAMCONFIG;
|
||||
pmic_reg_write(REG_MODE_1, val);
|
||||
udelay(200);
|
||||
|
||||
reg = readl(GPIO2_BASE_ADDR + 0x0);
|
||||
reg &= ~0x4000; /* Lower reset line */
|
||||
writel(reg, GPIO2_BASE_ADDR + 0x0);
|
||||
|
||||
reg = readl(GPIO2_BASE_ADDR + 0x4);
|
||||
reg |= 0x4000; /* configure GPIO lines as output */
|
||||
writel(reg, GPIO2_BASE_ADDR + 0x4);
|
||||
|
||||
/* Reset the ethernet controller over GPIO */
|
||||
writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);
|
||||
|
||||
/* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
|
||||
val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
|
||||
VVIDEOEN | VAUDIOEN | VSDEN;
|
||||
pmic_reg_write(REG_MODE_1, val);
|
||||
|
||||
udelay(500);
|
||||
|
||||
reg = readl(GPIO2_BASE_ADDR + 0x0);
|
||||
reg |= 0x4000;
|
||||
writel(reg, GPIO2_BASE_ADDR + 0x0);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_FSL_ESDHC
|
||||
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
|
||||
{
|
||||
@ -284,9 +411,21 @@ int board_init(void)
|
||||
|
||||
setup_iomux_uart();
|
||||
setup_iomux_fec();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef BOARD_LATE_INIT
|
||||
int board_late_init(void)
|
||||
{
|
||||
#ifdef CONFIG_MXC_SPI
|
||||
setup_iomux_spi();
|
||||
power_init();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
int checkboard(void)
|
||||
{
|
||||
puts("Board: MX51EVK ");
|
||||
|
@ -54,12 +54,27 @@
|
||||
/* size in bytes reserved for initial data */
|
||||
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
||||
|
||||
#define BOARD_LATE_INIT
|
||||
|
||||
/*
|
||||
* Hardware drivers
|
||||
*/
|
||||
#define CONFIG_MXC_UART
|
||||
#define CONFIG_SYS_MX51_UART1
|
||||
|
||||
/*
|
||||
* SPI Configs
|
||||
* */
|
||||
#define CONFIG_CMD_SPI
|
||||
|
||||
#define CONFIG_MXC_SPI
|
||||
|
||||
#define CONFIG_FSL_PMIC
|
||||
#define CONFIG_FSL_PMIC_BUS 0
|
||||
#define CONFIG_FSL_PMIC_CS 0
|
||||
#define CONFIG_FSL_PMIC_CLK 2500000
|
||||
#define CONFIG_FSL_PMIC_MODE (SPI_CPOL | SPI_CS_HIGH)
|
||||
|
||||
/*
|
||||
* MMC Configs
|
||||
* */
|
||||
|
Loading…
Reference in New Issue
Block a user