ARM: imx: Do not hard-code MX8M MMU table DRAM entry offset

Instead of hard-coding the offset of DRAM entries in MMU table all over
the code, auto-detect the offset. This removes error-prone code which
would break e.g. in case the MMU table is modified.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Ye Li <ye.li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
This commit is contained in:
Marek Vasut 2021-02-27 14:59:00 +01:00 committed by Stefano Babic
parent 5d42ea5535
commit 076dc92ac6
1 changed files with 16 additions and 3 deletions

View File

@ -154,6 +154,17 @@ static struct mm_region imx8m_mem_map[] = {
struct mm_region *mem_map = imx8m_mem_map;
static unsigned int imx8m_find_dram_entry_in_mem_map(void)
{
int i;
for (i = 0; i < ARRAY_SIZE(imx8m_mem_map); i++)
if (imx8m_mem_map[i].phys == CONFIG_SYS_SDRAM_BASE)
return i;
hang(); /* Entry not found, this must never happen. */
}
void enable_caches(void)
{
/* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch */
@ -167,10 +178,11 @@ void enable_caches(void)
* please make sure that entry initial value matches
* imx8m_mem_map for DRAM1
*/
int entry = 5;
int entry = imx8m_find_dram_entry_in_mem_map();
u64 attrs = imx8m_mem_map[entry].attrs;
while (i < CONFIG_NR_DRAM_BANKS && entry < 8) {
while (i < CONFIG_NR_DRAM_BANKS &&
entry < ARRAY_SIZE(imx8m_mem_map)) {
if (gd->bd->bi_dram[i].start == 0)
break;
imx8m_mem_map[entry].phys = gd->bd->bi_dram[i].start;
@ -198,6 +210,7 @@ __weak int board_phys_sdram_size(phys_size_t *size)
int dram_init(void)
{
unsigned int entry = imx8m_find_dram_entry_in_mem_map();
phys_size_t sdram_size;
int ret;
@ -212,7 +225,7 @@ int dram_init(void)
gd->ram_size = sdram_size;
/* also update the SDRAM size in the mem_map used externally */
imx8m_mem_map[5].size = sdram_size;
imx8m_mem_map[entry].size = sdram_size;
#ifdef PHYS_SDRAM_2_SIZE
gd->ram_size += PHYS_SDRAM_2_SIZE;