From 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Fri, 9 Feb 2007 10:45:42 +0100 Subject: [PATCH 01/30] [Motion-PRO] Preliminary support for the Motion-PRO board. --- MAKEALL | 6 +- Makefile | 3 + board/motionpro/Makefile | 50 ++++++ board/motionpro/config.mk | 30 ++++ board/motionpro/motionpro.c | 171 ++++++++++++++++++++ board/motionpro/u-boot.lds | 123 +++++++++++++++ cpu/mpc5xxx/fec.c | 8 +- include/configs/motionpro.h | 305 ++++++++++++++++++++++++++++++++++++ 8 files changed, 689 insertions(+), 7 deletions(-) create mode 100644 board/motionpro/Makefile create mode 100644 board/motionpro/config.mk create mode 100644 board/motionpro/motionpro.c create mode 100644 board/motionpro/u-boot.lds create mode 100644 include/configs/motionpro.h diff --git a/MAKEALL b/MAKEALL index 40a5c773e5..9221e7084a 100755 --- a/MAKEALL +++ b/MAKEALL @@ -37,9 +37,9 @@ LIST_5xx=" \ LIST_5xxx=" \ BC3450 cpci5200 EVAL5200 fo300 \ icecube_5100 icecube_5200 lite5200b mcc200 \ - o2dnt pf5200 PM520 TB5200 \ - Total5100 Total5200 Total5200_Rev2 TQM5200 \ - TQM5200_B TQM5200S v38b \ + motionpro o2dnt pf5200 PM520 \ + TB5200 Total5100 Total5200 Total5200_Rev2 \ + TQM5200 TQM5200_B TQM5200S v38b \ " ######################################################################### diff --git a/Makefile b/Makefile index b1952edfe7..e1bab6674c 100644 --- a/Makefile +++ b/Makefile @@ -604,6 +604,9 @@ TQM5200_STK100_config: unconfig @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 uc101_config: unconfig @$(MKCONFIG) uc101 ppc mpc5xxx uc101 +motionpro_config: unconfig + @$(MKCONFIG) motionpro ppc mpc5xxx motionpro + ######################################################################### ## MPC8xx Systems diff --git a/board/motionpro/Makefile b/board/motionpro/Makefile new file mode 100644 index 0000000000..698ead195c --- /dev/null +++ b/board/motionpro/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/motionpro/config.mk b/board/motionpro/config.mk new file mode 100644 index 0000000000..e7934d29c1 --- /dev/null +++ b/board/motionpro/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2006-2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# Promess Motion-PRO +# + +TEXT_BASE = 0xfff00000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c new file mode 100644 index 0000000000..95576ed56b --- /dev/null +++ b/board/motionpro/motionpro.c @@ -0,0 +1,171 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * modified for Promess PRO - by Andy Joseph, andy@promessdev.com + * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com + * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3 + * Also changed the refresh for 100Mhz operation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + + +/* Kollmorgen DPR initialization data */ +struct init_elem { + unsigned long addr; + unsigned len; + char *data; + } init_seq[] = { + {0x500003F2, 2, "\x86\x00"}, /* HW parameter */ + {0x500003F0, 2, "\x00\x00"}, + {0x500003EC, 4, "\x00\x80\xc1\x52"}, /* Magic word */ + }; + +/* + * Initialize Kollmorgen DPR + */ +static void kollmorgen_init(void) +{ + unsigned i, j; + vu_char *p; + + for (i = 0; i < sizeof(init_seq) / sizeof(struct init_elem); ++i) { + p = (vu_char *)init_seq[i].addr; + for (j = 0; j < init_seq[i].len; ++j) + *(p + j) = *(init_seq[i].data + j); + } + + printf("DPR: Kollmorgen DPR initialized\n"); +} + + +/* + * Early board initalization. + */ +int board_early_init_r(void) +{ + /* Now, when we are in RAM, disable Boot Chipselect and enable CS0 */ + *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); + *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); + + /* Initialize Kollmorgen DPR */ + kollmorgen_init(); + + return 0; +} + + +#ifndef CFG_RAMBOOT +/* + * Helper function to initialize SDRAM controller. + */ +static void sdram_start (int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | + hi_addr_bit; + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + + /* auto refresh, second time */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; +} +#endif /* !CFG_RAMBOOT */ + + +/* + * Initalize SDRAM - configure SDRAM controller, detect memory size. + */ +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* configure SDRAM start/end for detection */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + + sdram_start(0); + test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + else + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + + /* let SDRAM CS1 start right after CS0 and disable it */ + *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; + +#else /* !CFG_RAMBOOT */ + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) + dramsize = (1 << (dramsize - 0x13)) << 20; + else + dramsize = 0; +#endif /* CFG_RAMBOOT */ + + /* return total ram size */ + return dramsize; +} + + +int checkboard (void) +{ + puts("Board: Promess Motion-PRO board\n"); + return 0; +} diff --git a/board/motionpro/u-boot.lds b/board/motionpro/u-boot.lds new file mode 100644 index 0000000000..8fa9c0f7ed --- /dev/null +++ b/board/motionpro/u-boot.lds @@ -0,0 +1,123 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc5xxx/start.o (.text) + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 71c1bfab1a..e6392340a9 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -880,10 +880,10 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); #if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \ defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \ - defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \ - defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || defined(CONFIG_V38B) || \ - defined(CONFIG_UC101) + defined(CONFIG_MCC200) || defined(CONFIG_MOTIONPRO) || \ + defined(CONFIG_O2DNT) || defined(CONFIG_PM520) || \ + defined(CONFIG_TOP5200) || defined(CONFIG_TQM5200) || \ + defined(CONFIG_UC101) || defined(CONFIG_V38B) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h new file mode 100644 index 0000000000..5328e8d6b1 --- /dev/null +++ b/include/configs/motionpro.h @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2003-2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Based on PRO Motion board config file by Andy Joseph, andy@promessdev.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + +/* + * High Level Configuration Options + */ + + +/* CPU and board */ +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */ +#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ + + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_REGINFO | \ + CFG_CMD_IMMAP | \ + CFG_CMD_ELF | \ + CFG_CMD_MII | \ + CFG_CMD_BEDBUG | \ + CFG_CMD_NET | \ + CFG_CMD_PING) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_NETCONSOLE 1 /* network console */ +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x2 +#define CONFIG_PHY_TYPE 0x79c874 + + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ +#define CONFIG_AUTOBOOT_KEYED +#define CONFIG_AUTOBOOT_STOP_STR "\x1b\x1b" +#define DEBUG_BOOTKEYS 0 +#undef CONFIG_AUTOBOOT_DELAY_STR +#undef CONFIG_BOOTARGS +#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \ + "press \"\" to stop\n" + +#define CONFIG_ETHADDR 00:50:C2:40:10:00 +#define CONFIG_OVERWRITE_ETHADDR_ONCE 1 +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + + +/* + * Default environment settings + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "sdram_test=0\0" \ + "netdev=eth0\0" \ + "hostname=motionpro\0" \ + "netmask=255.255.0.0\0" \ + "ipaddr=192.168.160.22\0" \ + "serverip=192.168.1.1\0" \ + "gatewayip=192.168.1.1\0" \ + "kernel_addr=200000\0" \ + "u-boot_addr=100000\0" \ + "kernel_sector=20\0" \ + "kernel_size=1000\0" \ + "console=ttyS0,115200\0" \ + "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ + "bootfile=/tftpboot/motionpro/uImage\0" \ + "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ + "load=tftp $(u-boot_addr) $(u-boot)\0" \ + "update=prot off fff00000 fff3ffff; era fff00000 fff3ffff; " \ + "cp.b $(u-boot_addr) fff00000 $(filesize);" \ + "prot on fff00000 fff3ffff\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs $(bootargs) console=$(console) " \ + "ip=$(ipaddr):$(serverip):$(gatewayip):" \ + "$(netmask):$(hostname):$(netdev):off panic=1\0" \ + "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ + "flash_self=run ramargs addip;bootm $(kernel_addr) " \ + "$(ramdisk_addr)\0" \ + "net_nfs=tftp $(kernel_addr) $(bootfile); run nfsargs addip; " \ + "bootm $(kernel_addr)\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$(serverip):$(rootpath)\0" \ + "fstype=ext3\0" \ + "fatargs=setenv bootargs init=/linuxrc rw\0" \ + "" +#define CONFIG_BOOTCOMMAND "run net_nfs" + + +/* + * do board-specific init + */ +#define CONFIG_BOARD_EARLY_INIT_R 1 + + +/* + * Low level configuration + */ + + +/* + * Clock configuration: SYS_XTALIN = 25MHz + */ +#define CFG_MPC5XXX_CLKIN 25000000 + + +/* + * Memory map + */ +/* + * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000. + * Setting MBAR to otherwise will cause system hang when using SmartDMA such + * as network commands. + */ +#define CFG_MBAR 0xf0000000 +#define CFG_SDRAM_BASE 0x00000000 + +/* + * If building for running out of SDRAM, then MBAR has been set up beforehand + * (e.g., by the BDI). Otherwise we must specify the default boot-up value of + * MBAR, as given in the doccumentation. + */ +#if TEXT_BASE == 0x00100000 +#define CFG_DEFAULT_MBAR 0xf0000000 +#else /* TEXT_BASE != 0x00100000 */ +#define CFG_DEFAULT_MBAR 0x80000000 +#define CFG_LOWBOOT 1 +#endif /* TEXT_BASE == 0x00100000 */ + +/* Use SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +#define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (256 << 10) /* 256 kB for Monitor */ +#define CFG_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ + + +/* + * Chip selects configuration + */ +/* Boot Chipselect */ +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x03035D00 + +/* Flash memory addressing */ +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE +#define CFG_CS0_CFG CFG_BOOTCS_CFG + +/* Dual Port SRAM -- Kollmorgen Drive memory addressing */ +#define CFG_CS1_START 0x50000000 +#define CFG_CS1_SIZE 0x10000 +#define CFG_CS1_CFG 0x05055800 + +/* Local register access */ +#define CFG_CS2_START 0x50010000 +#define CFG_CS2_SIZE 0x10000 +#define CFG_CS2_CFG 0x05055800 + +/* Anybus CompactCom Module memory addressing */ +#define CFG_CS3_START 0x50020000 +#define CFG_CS3_SIZE 0x10000 +#define CFG_CS3_CFG 0x05055800 + +/* No burst and dead cycle = 2 for all CSs */ +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x22222222 + + +/* + * SDRAM configuration + */ +/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 2, 32 bit data bus */ +#define SDRAM_CONFIG1 0x52222600 +#define SDRAM_CONFIG2 0x88b70000 +#define SDRAM_CONTROL 0x50570000 +#define SDRAM_MODE 0x008d0000 + + +/* + * Flash configuration + */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 +#define CFG_FLASH_BASE 0xff000000 +#define CFG_FLASH_SIZE 0x01000000 +#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } +#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ + + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +/* This has to be a multiple of the Flash sector size */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) +#define CFG_ENV_SIZE 0x1000 +#define CFG_ENV_SECT_SIZE 0x10000 + + +/* + * Pin multiplexing configuration + */ + +/* PSC1: UART1 + * PSC2: GPIO (default) + * PSC3: GPIO (default) + * USB: 2xUART4/5 + * Ethernet: Ethernet 100Mbit with MD + * Timer: CAN2/GPIO + * PSC6/IRDA: GPIO (default) + */ +#define CFG_GPS_PORT_CONFIG 0x1105a004 + + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ +#define CFG_MEMTEST_END 0x03f00000 /* 1 ... 64 MiB in DRAM */ + +#define CFG_LOAD_ADDR 0x200000 /* default kernel load addr */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + + +/* + * Various low-level settings + */ +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ + + +/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ +#define CFG_RESET_ADDRESS 0xfff00100 + +#endif /* __CONFIG_H */ From 497d012e5be0194e1084073d0081eb1a844796b2 Mon Sep 17 00:00:00 2001 From: Gary Jennejohn Date: Mon, 12 Feb 2007 13:11:50 +0100 Subject: [PATCH 02/30] LPC2292: patch from Siemens. --- board/lpc2292sodimm/lpc2292sodimm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/board/lpc2292sodimm/lpc2292sodimm.c b/board/lpc2292sodimm/lpc2292sodimm.c index de04c66385..d212c63328 100644 --- a/board/lpc2292sodimm/lpc2292sodimm.c +++ b/board/lpc2292sodimm/lpc2292sodimm.c @@ -46,7 +46,7 @@ int board_init (void) gd->bd->bi_arch_number = 83; /* location of boot parameters */ - gd->bd->bi_boot_params = 0xc0000100; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; return 0; } From 4be23a12f23f1372634edc3215137b09768b7949 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 19 Feb 2007 08:23:15 +0100 Subject: [PATCH 03/30] [PATCH] Update Sequoia EBC configuration (NOR FLASH) As spotted by Matthias Fuchs, the READY input should not be enabled for the NOR FLASH on the Sequoia board. Signed-off-by: Stefan Roese --- include/configs/sequoia.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 098aa3f0a6..29f3b408d2 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -391,7 +391,7 @@ #if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) #define CFG_NAND_CS 3 /* NAND chip connected to CSx */ /* Memory Bank 0 (NOR-FLASH) initialization */ -#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0AP 0x03017200 #define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) /* Memory Bank 3 (NAND-FLASH) initialization */ @@ -400,7 +400,7 @@ #else #define CFG_NAND_CS 0 /* NAND chip connected to CSx */ /* Memory Bank 3 (NOR-FLASH) initialization */ -#define CFG_EBC_PB3AP 0x03017300 +#define CFG_EBC_PB3AP 0x03017200 #define CFG_EBC_PB3CR (CFG_FLASH | 0xda000) /* Memory Bank 0 (NAND-FLASH) initialization */ From 489c696ae7211218961d159e43e722d74c36fcbc Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Wed, 14 Feb 2007 14:30:28 +0300 Subject: [PATCH 04/30] MCC200: Extensions to Software Update Mechanism Update / extend Software Update Mechanism for MCC200 board: - Add support for rootfs image added. The environment variables "rootfs_st" and "rootfs_nd" can be used to override the default values of the image start and end. - Remove excessive key check code. - Code cleanup. --- board/mcc200/auto_update.c | 93 +++++++++++++++++++------------------- 1 file changed, 46 insertions(+), 47 deletions(-) diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index f1bb721284..12091fd782 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -47,25 +47,6 @@ #error "must define CFG_CMD_FAT" #endif -/* - * Check whether a USB memory stick is plugged in. - * If one is found: - * 1) if prepare.img ist found load it into memory. If it is - * valid then run it. - * 2) if preinst.img is found load it into memory. If it is - * valid then run it. Update the EEPROM. - * 3) if firmw_01.img is found load it into memory. If it is valid, - * burn it into FLASH and update the EEPROM. - * 4) if kernl_01.img is found load it into memory. If it is valid, - * burn it into FLASH and update the EEPROM. - * 5) if app.img is found load it into memory. If it is valid, - * burn it into FLASH and update the EEPROM. - * 6) if disk.img is found load it into memory. If it is valid, - * burn it into FLASH and update the EEPROM. - * 7) if postinst.img is found load it into memory. If it is - * valid then run it. Update the EEPROM. - */ - #undef AU_DEBUG #undef debug @@ -78,6 +59,7 @@ /* possible names of files on the USB stick. */ #define AU_FIRMWARE "u-boot.img" #define AU_KERNEL "kernel.img" +#define AU_ROOTFS "rootfs.img" struct flash_layout { long start; @@ -89,33 +71,45 @@ struct flash_layout { #define AU_FL_FIRMWARE_ND 0xfC03FFFF #define AU_FL_KERNEL_ST 0xfC0C0000 #define AU_FL_KERNEL_ND 0xfC1BFFFF +#define AU_FL_ROOTFS_ST 0xFC1C0000 +#define AU_FL_ROOTFS_ND 0xFCFBFFFF static int au_usb_stor_curr_dev; /* current device */ /* index of each file in the following arrays */ #define IDX_FIRMWARE 0 #define IDX_KERNEL 1 +#define IDX_ROOTFS 2 /* max. number of files which could interest us */ -#define AU_MAXFILES 2 +#define AU_MAXFILES 3 /* pointers to file names */ -char *aufile[AU_MAXFILES]; +char *aufile[AU_MAXFILES] = { + AU_FIRMWARE, + AU_KERNEL, + AU_ROOTFS +}; /* sizes of flash areas for each file */ -long ausize[AU_MAXFILES]; +long ausize[AU_MAXFILES] = { + (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST, + (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST, + (AU_FL_ROOTFS_ND + 1) - AU_FL_ROOTFS_ST +}; /* array of flash areas start and end addresses */ -struct flash_layout aufl_layout[AU_MAXFILES] = { \ - {AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND,}, \ - {AU_FL_KERNEL_ST, AU_FL_KERNEL_ND,}, \ +struct flash_layout aufl_layout[AU_MAXFILES] = { + {AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND,}, + {AU_FL_KERNEL_ST, AU_FL_KERNEL_ND,}, + {AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND,} }; /* where to load files into memory */ #define LOAD_ADDR ((unsigned char *)0x00200000) /* the app is the largest image */ -#define MAX_LOADSZ ausize[IDX_KERNEL] +#define MAX_LOADSZ ausize[IDX_ROOTFS] /*i2c address of the keypad status*/ #define I2C_PSOC_KEYPAD_ADDR 0x53 @@ -163,7 +157,6 @@ int au_check_header_valid(int idx, long nbytes) { image_header_t *hdr; unsigned long checksum; - unsigned char buf[4]; hdr = (image_header_t *)LOAD_ADDR; /* check the easy ones first */ @@ -200,6 +193,10 @@ int au_check_header_valid(int idx, long nbytes) printf ("Image %s wrong type\n", aufile[idx]); return -1; } + if ((idx == IDX_ROOTFS) && (hdr->ih_type != IH_TYPE_RAMDISK)) { + printf ("Image %s wrong type\n", aufile[idx]); + return -1; + } /* recycle checksum */ checksum = ntohl(hdr->ih_size); /* for kernel and app the image header must also fit into flash */ @@ -257,7 +254,7 @@ int au_do_update(int idx, long sz) flash_sect_erase(start, end); wait_ms(100); /* strip the header - except for the kernel and ramdisk */ - if (hdr->ih_type == IH_TYPE_KERNEL) { + if (hdr->ih_type == IH_TYPE_KERNEL || hdr->ih_type == IH_TYPE_RAMDISK) { addr = (char *)hdr; off = sizeof(*hdr); nbytes = sizeof(*hdr) + ntohl(hdr->ih_size); @@ -305,7 +302,7 @@ int do_auto_update(void) int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc; char *env; long start, end; - char keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0}; + uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0}; /* * Read keypad status @@ -317,10 +314,6 @@ int do_auto_update(void) /* * Check keypad */ - if ( !(keypad_status1[0] & KEYPAD_MASK_HI) || - (keypad_status1[0] != keypad_status2[0])) { - return 0; - } if ( !(keypad_status1[1] & KEYPAD_MASK_LO) || (keypad_status1[1] != keypad_status2[1])) { return 0; @@ -359,14 +352,6 @@ int do_auto_update(void) debug ("file_fat_detectfs failed\n"); } - /* initialize the array of file names */ - memset(aufile, 0, sizeof(aufile)); - aufile[IDX_FIRMWARE] = AU_FIRMWARE; - aufile[IDX_KERNEL] = AU_KERNEL; - /* initialize the array of flash sizes */ - memset(ausize, 0, sizeof(ausize)); - ausize[IDX_FIRMWARE] = (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST; - ausize[IDX_KERNEL] = (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST; /* * now check whether start and end are defined using environment * variables. @@ -381,8 +366,8 @@ int do_auto_update(void) end = simple_strtoul(env, NULL, 16); if (start >= 0 && end && end > start) { ausize[IDX_FIRMWARE] = (end + 1) - start; - aufl_layout[0].start = start; - aufl_layout[0].end = end; + aufl_layout[IDX_FIRMWARE].start = start; + aufl_layout[IDX_FIRMWARE].end = end; } start = -1; end = 0; @@ -394,9 +379,23 @@ int do_auto_update(void) end = simple_strtoul(env, NULL, 16); if (start >= 0 && end && end > start) { ausize[IDX_KERNEL] = (end + 1) - start; - aufl_layout[1].start = start; - aufl_layout[1].end = end; + aufl_layout[IDX_KERNEL].start = start; + aufl_layout[IDX_KERNEL].end = end; } + start = -1; + end = 0; + env = getenv("rootfs_st"); + if (env != NULL) + start = simple_strtoul(env, NULL, 16); + env = getenv("rootfs_nd"); + if (env != NULL) + end = simple_strtoul(env, NULL, 16); + if (start >= 0 && end && end > start) { + ausize[IDX_ROOTFS] = (end + 1) - start; + aufl_layout[IDX_ROOTFS].start = start; + aufl_layout[IDX_ROOTFS].end = end; + } + /* make certain that HUSH is runnable */ u_boot_hush_start(); /* make sure that we see CTRL-C and save the old state */ @@ -443,8 +442,8 @@ int do_auto_update(void) } cnt++; #ifdef AU_TEST_ONLY - } while (res < 0 && cnt < 3); - if (cnt < 3) + } while (res < 0 && cnt < (AU_MAXFILES + 1)); + if (cnt < (AU_MAXFILES + 1)) #else } while (res < 0); #endif From f5fcc3c20b65554e98a165542c36ee0c610a2d81 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 19 Feb 2007 23:09:51 +0100 Subject: [PATCH 05/30] MCC200: Software Updater: allow both "ramdisk" and "filesystem" types as root file system images. --- board/mcc200/auto_update.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 12091fd782..43ef42bcc2 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -94,21 +94,21 @@ char *aufile[AU_MAXFILES] = { /* sizes of flash areas for each file */ long ausize[AU_MAXFILES] = { (AU_FL_FIRMWARE_ND + 1) - AU_FL_FIRMWARE_ST, - (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST, - (AU_FL_ROOTFS_ND + 1) - AU_FL_ROOTFS_ST + (AU_FL_KERNEL_ND + 1) - AU_FL_KERNEL_ST, + (AU_FL_ROOTFS_ND + 1) - AU_FL_ROOTFS_ST, }; /* array of flash areas start and end addresses */ struct flash_layout aufl_layout[AU_MAXFILES] = { - {AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND,}, - {AU_FL_KERNEL_ST, AU_FL_KERNEL_ND,}, - {AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND,} + { AU_FL_FIRMWARE_ST, AU_FL_FIRMWARE_ND, }, + { AU_FL_KERNEL_ST, AU_FL_KERNEL_ND, }, + { AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND, }, }; /* where to load files into memory */ #define LOAD_ADDR ((unsigned char *)0x00200000) -/* the app is the largest image */ +/* the root file system is the largest image */ #define MAX_LOADSZ ausize[IDX_ROOTFS] /*i2c address of the keypad status*/ @@ -193,7 +193,9 @@ int au_check_header_valid(int idx, long nbytes) printf ("Image %s wrong type\n", aufile[idx]); return -1; } - if ((idx == IDX_ROOTFS) && (hdr->ih_type != IH_TYPE_RAMDISK)) { + if ((idx == IDX_ROOTFS) && + ( (hdr->ih_type != IH_TYPE_RAMDISK) || (hdr->ih_type != IH_TYPE_FILESYSTEM) ) + ) { printf ("Image %s wrong type\n", aufile[idx]); return -1; } @@ -277,9 +279,9 @@ int au_do_update(int idx, long sz) return -1; } - /* check the dcrc of the copy */ + /* check the data CRC of the copy */ if (crc32 (0, (uchar *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) { - printf ("Image %s Bad Data Checksum After COPY\n", aufile[idx]); + printf ("Image %s Bad Data Checksum after COPY\n", aufile[idx]); return -1; } From 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:04:34 +0100 Subject: [PATCH 06/30] [PATCH 1_4] Merge common get_dev() routines for block devices Each of the filesystem drivers duplicate the get_dev routine. This change merges them into a single function in part.c Signed-off-by: Grant Likely --- board/esd/common/auto_update.c | 3 +-- board/mcc200/auto_update.c | 3 +-- board/mpl/mip405/mip405.c | 3 --- board/trab/auto_update.c | 1 - common/cmd_ext2.c | 40 +++------------------------ common/cmd_fat.c | 37 +------------------------ common/cmd_ide.c | 8 +++++- common/cmd_reiser.c | 40 +++------------------------ common/cmd_scsi.c | 2 +- common/cmd_usb.c | 1 + common/usb_storage.c | 3 ++- cpu/pxa/mmc.c | 2 +- disk/part.c | 49 ++++++++++++++++++++++++++++++++++ include/ide.h | 6 ++--- include/part.h | 9 +++++++ 15 files changed, 82 insertions(+), 125 deletions(-) diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 5cd342332f..001fd68da4 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -33,6 +33,7 @@ #include #include #include +#include #include "auto_update.h" @@ -71,8 +72,6 @@ extern int transfer_pic(unsigned char, unsigned char *, int, int); extern int flash_sect_erase(ulong, ulong); extern int flash_sect_protect (int, ulong, ulong); extern int flash_write (char *, ulong, ulong); -/* change char* to void* to shutup the compiler */ -extern block_dev_desc_t *get_dev (char*, int); #if (CONFIG_COMMANDS & CFG_CMD_NAND) && defined(CFG_NAND_LEGACY) /* references to names in cmd_nand.c */ diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 12091fd782..df003fe8be 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -23,6 +23,7 @@ #include #include #include +#include #ifdef CFG_HUSH_PARSER #include @@ -128,8 +129,6 @@ extern int i2c_read (unsigned char, unsigned int, int , unsigned char* , int); extern int flash_sect_erase(ulong, ulong); extern int flash_sect_protect (int, ulong, ulong); extern int flash_write (char *, ulong, ulong); -/* change char* to void* to shutup the compiler */ -extern block_dev_desc_t *get_dev (char*, int); extern int u_boot_hush_start(void); int au_check_cksum_valid(int idx, long nbytes) diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 34f328999d..13249787db 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -73,9 +73,6 @@ DECLARE_GLOBAL_DATA_PTR; -extern block_dev_desc_t * scsi_get_dev(int dev); -extern block_dev_desc_t * ide_get_dev(int dev); - #undef SDRAM_DEBUG #define ENABLE_ECC /* for ecc boards */ #define FALSE 0 diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c index d2c8d44a79..f4074aecb1 100644 --- a/board/trab/auto_update.c +++ b/board/trab/auto_update.c @@ -203,7 +203,6 @@ extern int flash_write (char *, ulong, ulong); /* change char* to void* to shutup the compiler */ extern int i2c_write_multiple (uchar, uint, int, void *, int); extern int i2c_read_multiple (uchar, uint, int, void *, int); -extern block_dev_desc_t *get_dev (char*, int); extern int u_boot_hush_start(void); int diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 5db42f2b0d..94bd9b61e6 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -33,6 +33,7 @@ * Ext2fs support */ #include +#include #if (CONFIG_COMMANDS & CFG_CMD_EXT2) #include @@ -57,41 +58,6 @@ #define PRINTF(fmt,args...) #endif -static block_dev_desc_t *get_dev (char* ifname, int dev) -{ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) - if (strncmp(ifname,"ide",3)==0) { - extern block_dev_desc_t * ide_get_dev(int dev); - return((dev >= CFG_IDE_MAXDEVICE) ? NULL : ide_get_dev(dev)); - } -#endif -#if (CONFIG_COMMANDS & CFG_CMD_SCSI) - if (strncmp(ifname,"scsi",4)==0) { - extern block_dev_desc_t * scsi_get_dev(int dev); - return((dev >= CFG_SCSI_MAXDEVICE) ? NULL : scsi_get_dev(dev)); - } -#endif -#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE)) - if (strncmp(ifname,"usb",3)==0) { - extern block_dev_desc_t * usb_stor_get_dev(int dev); - return((dev >= USB_MAX_STOR_DEV) ? NULL : usb_stor_get_dev(dev)); - } -#endif -#if defined(CONFIG_MMC) - if (strncmp(ifname,"mmc",3)==0) { - extern block_dev_desc_t * mmc_get_dev(int dev); - return((dev >= 1) ? NULL : mmc_get_dev(dev)); - } -#endif -#if defined(CONFIG_SYSTEMACE) - if (strcmp(ifname,"ace")==0) { - extern block_dev_desc_t * systemace_get_dev(int dev); - return((dev >= 1) ? NULL : systemace_get_dev(dev)); - } -#endif - return(NULL); -} - int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { char *filename = "/"; @@ -106,7 +72,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return(1); } dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); + dev_desc = get_dev(argv[1],dev); if (dev_desc == NULL) { printf ("\n** Block device %s %d not supported\n", argv[1], dev); @@ -210,7 +176,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); + dev_desc = get_dev(argv[1],dev); if (dev_desc==NULL) { printf ("\n** Block device %s %d not supported\n", argv[1], dev); return(1); diff --git a/common/cmd_fat.c b/common/cmd_fat.c index 6844c103f2..afaf299569 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -29,6 +29,7 @@ #include #include #include +#include #if (CONFIG_COMMANDS & CFG_CMD_FAT) @@ -37,42 +38,6 @@ #include -block_dev_desc_t *get_dev (char* ifname, int dev) -{ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) - if (strncmp(ifname,"ide",3)==0) { - extern block_dev_desc_t * ide_get_dev(int dev); - return(ide_get_dev(dev)); - } -#endif -#if (CONFIG_COMMANDS & CFG_CMD_SCSI) - if (strncmp(ifname,"scsi",4)==0) { - extern block_dev_desc_t * scsi_get_dev(int dev); - return(scsi_get_dev(dev)); - } -#endif -#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE)) - if (strncmp(ifname,"usb",3)==0) { - extern block_dev_desc_t * usb_stor_get_dev(int dev); - return(usb_stor_get_dev(dev)); - } -#endif -#if defined(CONFIG_MMC) - if (strncmp(ifname,"mmc",3)==0) { - extern block_dev_desc_t * mmc_get_dev(int dev); - return(mmc_get_dev(dev)); - } -#endif -#if defined(CONFIG_SYSTEMACE) - if (strcmp(ifname,"ace")==0) { - extern block_dev_desc_t * systemace_get_dev(int dev); - return(systemace_get_dev(dev)); - } -#endif - return NULL; -} - - int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { long size; diff --git a/common/cmd_ide.c b/common/cmd_ide.c index a4155029a7..ebc080c72a 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -31,20 +31,26 @@ #include #include #include + #if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA) # include #endif + #ifdef CONFIG_8xx # include #endif + #ifdef CONFIG_MPC5xxx #include #endif + #include #include + #ifdef CONFIG_STATUS_LED # include #endif + #ifndef __PPC__ #include #ifdef __MIPS__ @@ -697,7 +703,7 @@ void ide_init (void) block_dev_desc_t * ide_get_dev(int dev) { - return ((block_dev_desc_t *)&ide_dev_desc[dev]); + return (dev < CFG_IDE_MAXDEVICE) ? &ide_dev_desc[dev] : NULL; } diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index 508ffcbdac..09c86e66d7 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -35,6 +35,7 @@ #include #include #include +#include #ifndef CONFIG_DOS_PARTITION #error DOS partition support must be selected @@ -48,41 +49,6 @@ #define PRINTF(fmt,args...) #endif -static block_dev_desc_t *get_dev (char* ifname, int dev) -{ -#if (CONFIG_COMMANDS & CFG_CMD_IDE) - if (strncmp(ifname,"ide",3)==0) { - extern block_dev_desc_t * ide_get_dev(int dev); - return((dev >= CFG_IDE_MAXDEVICE) ? NULL : ide_get_dev(dev)); - } -#endif -#if (CONFIG_COMMANDS & CFG_CMD_SCSI) - if (strncmp(ifname,"scsi",4)==0) { - extern block_dev_desc_t * scsi_get_dev(int dev); - return((dev >= CFG_SCSI_MAXDEVICE) ? NULL : scsi_get_dev(dev)); - } -#endif -#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE)) - if (strncmp(ifname,"usb",3)==0) { - extern block_dev_desc_t * usb_stor_get_dev(int dev); - return((dev >= USB_MAX_STOR_DEV) ? NULL : usb_stor_get_dev(dev)); - } -#endif -#if defined(CONFIG_MMC) - if (strncmp(ifname,"mmc",3)==0) { - extern block_dev_desc_t * mmc_get_dev(int dev); - return((dev >= 1) ? NULL : mmc_get_dev(dev)); - } -#endif -#if defined(CONFIG_SYSTEMACE) - if (strcmp(ifname,"ace")==0) { - extern block_dev_desc_t * systemace_get_dev(int dev); - return((dev >= 1) ? NULL : systemace_get_dev(dev)); - } -#endif - return NULL; -} - int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { char *filename = "/"; @@ -97,7 +63,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return 1; } dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); + dev_desc = get_dev(argv[1],dev); if (dev_desc == NULL) { printf ("\n** Block device %s %d not supported\n", argv[1], dev); @@ -196,7 +162,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } dev = (int)simple_strtoul (argv[2], &ep, 16); - dev_desc=get_dev(argv[1],dev); + dev_desc = get_dev(argv[1],dev); if (dev_desc==NULL) { printf ("\n** Block device %s %d not supported\n", argv[1], dev); return 1; diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index cc08743d5d..b17bebbacf 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -194,7 +194,7 @@ void scsi_init(void) block_dev_desc_t * scsi_get_dev(int dev) { - return((block_dev_desc_t *)&scsi_dev_desc[dev]); + return (dev < CFG_SCSI_MAX_DEVICE) ? &scsi_dev_desc[dev] : NULL; } diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 28c05aa20e..904df7159f 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -28,6 +28,7 @@ #include #include #include +#include #if (CONFIG_COMMANDS & CFG_CMD_USB) diff --git a/common/usb_storage.c b/common/usb_storage.c index 06ea99b2f1..b4b7914089 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -56,6 +56,7 @@ #if (CONFIG_COMMANDS & CFG_CMD_USB) +#include #include #ifdef CONFIG_USB_STORAGE @@ -174,7 +175,7 @@ void uhci_show_temp_int_td(void); block_dev_desc_t *usb_stor_get_dev(int index) { - return &usb_dev_desc[index]; + return (index < USB_MAX_STOR_DEV) ? &usb_dev_desc[index] : NULL; } diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index f7020eec95..c57d0d5c32 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -37,7 +37,7 @@ static block_dev_desc_t mmc_dev; block_dev_desc_t * mmc_get_dev(int dev) { - return ((block_dev_desc_t *)&mmc_dev); + return (dev == 0) ? &mmc_dev : NULL; } /* diff --git a/disk/part.c b/disk/part.c index 2255e726cf..f1026c5ef2 100644 --- a/disk/part.c +++ b/disk/part.c @@ -24,6 +24,7 @@ #include #include #include +#include #undef PART_DEBUG @@ -33,6 +34,54 @@ #define PRINTF(fmt,args...) #endif +#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ + (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ + (CONFIG_COMMANDS & CFG_CMD_USB) || \ + defined(CONFIG_MMC) || \ + defined(CONFIG_SYSTEMACE) ) + +struct block_drvr { + char *name; + block_dev_desc_t* (*get_dev)(int dev); +}; + +static const struct block_drvr block_drvr[] = { +#if (CONFIG_COMMANDS & CFG_CMD_IDE) + { .name = "ide", .get_dev = ide_get_dev, }, +#endif +#if (CONFIG_COMMANDS & CFG_CMD_SCSI) + { .name = "scsi", .get_dev = scsi_get_dev, }, +#endif +#if ((CONFIG_COMMANDS & CFG_CMD_USB) && defined(CONFIG_USB_STORAGE)) + { .name = "usb", .get_dev = usb_stor_get_dev, }, +#endif +#if defined(CONFIG_MMC) + { .name = "mmc", .get_dev = mmc_get_dev, }, +#endif +#if defined(CONFIG_SYSTEMACE) + { .name = "ace", .get_dev = systemace_get_dev, }, +#endif + { }, +}; + +block_dev_desc_t *get_dev(char* ifname, int dev) +{ + const struct block_drvr *drvr = block_drvr; + + while (drvr->name) { + if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0) + return drvr->get_dev(dev); + drvr++; + } + return NULL; +} +#else +block_dev_desc_t *get_dev(char* ifname, int dev) +{ + return NULL; +} +#endif + #if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \ (CONFIG_COMMANDS & CFG_CMD_SCSI) || \ (CONFIG_COMMANDS & CFG_CMD_USB) || \ diff --git a/include/ide.h b/include/ide.h index dfef32f267..e29ed36de0 100644 --- a/include/ide.h +++ b/include/ide.h @@ -48,8 +48,8 @@ typedef ulong lbaint_t; * Function Prototypes */ -void ide_init (void); -ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); -ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); +void ide_init(void); +ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); +ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); #endif /* _IDE_H */ diff --git a/include/part.h b/include/part.h index 318aa3cb3f..f89ebc6e73 100644 --- a/include/part.h +++ b/include/part.h @@ -22,6 +22,7 @@ */ #ifndef _PART_H #define _PART_H + #include typedef struct block_dev_desc { @@ -83,6 +84,14 @@ typedef struct disk_partition { uchar type[32]; /* string type description */ } disk_partition_t; +/* Misc _get_dev functions */ +block_dev_desc_t* get_dev(char* ifname, int dev); +block_dev_desc_t* ide_get_dev(int dev); +block_dev_desc_t* scsi_get_dev(int dev); +block_dev_desc_t* usb_stor_get_dev(int dev); +block_dev_desc_t* mmc_get_dev(int dev); +block_dev_desc_t* systemace_get_dev(int dev); + /* disk/part.c */ int get_partition_info (block_dev_desc_t * dev_desc, int part, disk_partition_t *info); void print_part (block_dev_desc_t *dev_desc); From 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:04:52 +0100 Subject: [PATCH 07/30] [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets Change the xilinx device drivers and board code to include config.h instead of xparameters.h directly. config.h always includes the correct xparameters file. This change reduces the posibility of including the wrong file when adding a new xilinx board port Signed-off-by: Grant Likely --- board/xilinx/ml300/Makefile | 2 +- board/xilinx/ml300/ml300.c | 2 +- board/xilinx/ml300/serial.c | 3 +-- board/xilinx/xilinx_enet/emac_adapter.c | 2 +- board/xilinx/xilinx_enet/xemac.h | 2 +- board/xilinx/xilinx_enet/xemac_g.c | 2 +- board/xilinx/xilinx_iic/iic_adapter.c | 2 +- 7 files changed, 7 insertions(+), 8 deletions(-) diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile index 02c22fbef1..05ad23524f 100644 --- a/board/xilinx/ml300/Makefile +++ b/board/xilinx/ml300/Makefile @@ -28,7 +28,7 @@ $(shell mkdir -p $(obj)../xilinx_enet) $(shell mkdir -p $(obj)../xilinx_iic) endif -INCS := -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic +INCS := -I../common -I../xilinx_enet -I../xilinx_iic CFLAGS += $(INCS) HOST_CFLAGS += $(INCS) diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c index dad562f1c7..60f0bc24e7 100644 --- a/board/xilinx/ml300/ml300.c +++ b/board/xilinx/ml300/ml300.c @@ -38,9 +38,9 @@ * */ +#include #include #include -#include "xparameters.h" #ifdef CFG_ENV_IS_IN_EEPROM extern void convert_env(void); diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c index c204b88e41..9b03f89eff 100644 --- a/board/xilinx/ml300/serial.c +++ b/board/xilinx/ml300/serial.c @@ -40,8 +40,7 @@ #include #include #include -#include -#include "xparameters.h" +#include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c index b30e897669..f159cb6e39 100644 --- a/board/xilinx/xilinx_enet/emac_adapter.c +++ b/board/xilinx/xilinx_enet/emac_adapter.c @@ -37,9 +37,9 @@ * ******************************************************************************/ +#include #include #include -#include "xparameters.h" #include "xemac.h" #if defined(XPAR_EMAC_0_DEVICE_ID) diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h index ed704bf29b..584cb7ac51 100644 --- a/board/xilinx/xilinx_enet/xemac.h +++ b/board/xilinx/xilinx_enet/xemac.h @@ -257,9 +257,9 @@ /***************************** Include Files *********************************/ +#include #include "xbasic_types.h" #include "xstatus.h" -#include "xparameters.h" #include "xpacket_fifo_v1_00_b.h" /* Uses v1.00b of Packet Fifo */ #include "xdma_channel.h" diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c index 9340f911f8..d9851574f7 100644 --- a/board/xilinx/xilinx_enet/xemac_g.c +++ b/board/xilinx/xilinx_enet/xemac_g.c @@ -43,7 +43,7 @@ * *******************************************************************/ -#include "xparameters.h" +#include #include "xemac.h" /* diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c index 163fe1511d..37dce03916 100644 --- a/board/xilinx/xilinx_iic/iic_adapter.c +++ b/board/xilinx/xilinx_iic/iic_adapter.c @@ -37,10 +37,10 @@ * ******************************************************************************/ +#include #include #include #include -#include "xparameters.h" #ifdef CFG_ENV_IS_IN_EEPROM #include From c95c4280d751ca078c2ff58228d2f2b44ccf0600 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:00 +0100 Subject: [PATCH 08/30] [PATCH 3_9] Move buffer print code from md command to common function Printing a buffer is a darn useful thing. Move the buffer print code into print_buffer() in lib_generic/ Signed-off-by: Grant Likely --- common/cmd_mem.c | 65 +++++++------------------------- include/common.h | 2 + lib_generic/display_options.c | 70 +++++++++++++++++++++++++++++++++++ 3 files changed, 86 insertions(+), 51 deletions(-) diff --git a/common/cmd_mem.c b/common/cmd_mem.c index d0fae6b24c..fcbb0236d2 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -92,8 +92,9 @@ static ulong base_address = 0; int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { ulong addr, length; - ulong i, nbytes, linebytes; - u_char *cp; +#if defined(CONFIG_HAS_DATAFLASH) + ulong nbytes, linebytes; +#endif int size; int rc = 0; @@ -128,6 +129,7 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) length = simple_strtoul(argv[2], NULL, 16); } +#if defined(CONFIG_HAS_DATAFLASH) /* Print the lines. * * We buffer all read data, so we can make sure data is read only @@ -136,64 +138,25 @@ int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) nbytes = length * size; do { char linebuf[DISP_LINE_LEN]; - uint *uip = (uint *)linebuf; - ushort *usp = (ushort *)linebuf; - u_char *ucp = (u_char *)linebuf; -#ifdef CONFIG_HAS_DATAFLASH - int rc; -#endif - printf("%08lx:", addr); + void* p; linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; -#ifdef CONFIG_HAS_DATAFLASH - if ((rc = read_dataflash(addr, (linebytes/size)*size, linebuf)) == DATAFLASH_OK){ - /* if outside dataflash */ - /*if (rc != 1) { - dataflash_perror (rc); - return (1); - }*/ - for (i=0; i 0x7e)) - putc ('.'); - else - printf("%c", *cp); - cp++; - } - putc ('\n'); nbytes -= linebytes; + addr += linebytes; if (ctrlc()) { rc = 1; break; } } while (nbytes > 0); +#else + /* Print the lines. */ + print_buffer(addr, (void*)addr, size, length, DISP_LINE_LEN/size); + addr += size*length; +#endif dp_last_addr = addr; dp_last_length = length; diff --git a/include/common.h b/include/common.h index 982d6a8637..5b2e71c985 100644 --- a/include/common.h +++ b/include/common.h @@ -187,6 +187,8 @@ void hang (void) __attribute__ ((noreturn)); long int initdram (int); int display_options (void); void print_size (ulong, const char *); +int print_buffer (ulong addr, void* data, uint width, uint count, + uint linelen); /* common/main.c */ void main_loop (void); diff --git a/lib_generic/display_options.c b/lib_generic/display_options.c index 512e8980d9..5ddd94fd5a 100644 --- a/lib_generic/display_options.c +++ b/lib_generic/display_options.c @@ -21,7 +21,10 @@ * MA 02111-1307 USA */ +#include #include +#include +#include int display_options (void) { @@ -65,3 +68,70 @@ void print_size (ulong size, const char *s) } printf (" %cB%s", c, s); } + +/* + * Print data buffer in hex and ascii form to the terminal. + * + * data reads are buffered so that each memory address is only read once. + * Useful when displaying the contents of volatile registers. + * + * parameters: + * addr: Starting address to display at start of line + * data: pointer to data buffer + * width: data value width. May be 1, 2, or 4. + * count: number of values to display + * linelen: Number of values to print per line; specify 0 for default length + */ +#define MAX_LINE_LENGTH_BYTES (64) +#define DEFAULT_LINE_LENGTH_BYTES (16) +int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen) +{ + uint8_t linebuf[MAX_LINE_LENGTH_BYTES]; + uint32_t *uip = (void*)linebuf; + uint16_t *usp = (void*)linebuf; + uint8_t *ucp = (void*)linebuf; + int i; + + if (linelen*width > MAX_LINE_LENGTH_BYTES) + linelen = MAX_LINE_LENGTH_BYTES / width; + if (linelen < 1) + linelen = DEFAULT_LINE_LENGTH_BYTES / width; + + while (count) { + printf("%08lx:", addr); + + /* check for overflow condition */ + if (count < linelen) + linelen = count; + + /* Copy from memory into linebuf and print hex values */ + for (i = 0; i < linelen; i++) { + if (width == 4) { + uip[i] = *(volatile uint32_t *)data; + printf(" %08x", uip[i]); + } else if (width == 2) { + usp[i] = *(volatile uint16_t *)data; + printf(" %04x", usp[i]); + } else { + ucp[i] = *(volatile uint8_t *)data; + printf(" %02x", ucp[i]); + } + data += width; + } + + /* Print data in ASCII characters */ + puts(" "); + for (i = 0; i < linelen * width; i++) + putc(isprint(ucp[i]) && (ucp[i] < 0x80) ? ucp[i] : '.'); + putc ('\n'); + + /* update references */ + addr += linelen * width; + count -= linelen; + + if (ctrlc()) + return -1; + } + + return 0; +} From 80ba981d940471fe7e539e64fa3d2bd80002beda Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:07 +0100 Subject: [PATCH 09/30] [PATCH 4_4] Remove local implementation of isprint() in ft_build.c isprint is already defined in ctype.c Signed-off-by: Grant Likely --- common/ft_build.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/common/ft_build.c b/common/ft_build.c index 980e40f55d..5a0575e89a 100644 --- a/common/ft_build.c +++ b/common/ft_build.c @@ -29,6 +29,7 @@ #include #include +#include #undef DEBUG @@ -180,11 +181,6 @@ void ft_finalize_tree(struct ft_cxt *cxt) { bph->dt_strings_size = cxt->p_end - cxt->p; } -static inline int isprint(int c) -{ - return c >= 0x20 && c <= 0x7e; -} - static int is_printable_string(const void *data, int len) { const char *s = data; From 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:16 +0100 Subject: [PATCH 10/30] [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) This patch is in preparation of additional changes to the sysace driver. May as well take this opportunity to fixup the inconsistent whitespace since this file is about to undergo major changes anyway. There are zero functional changes in this patch. It only cleans up the the whitespace. Signed-off-by: Grant Likely --- common/cmd_ace.c | 267 +++++++++++++++++++++++------------------------ 1 file changed, 132 insertions(+), 135 deletions(-) diff --git a/common/cmd_ace.c b/common/cmd_ace.c index b6d61057fd..8dd98d03fb 100644 --- a/common/cmd_ace.c +++ b/common/cmd_ace.c @@ -17,7 +17,6 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA */ -#ident "$Id:$" /* * The Xilinx SystemACE chip support is activated by defining @@ -34,16 +33,16 @@ * * According to Xilinx technical support, before accessing the * SystemACE CF you need to set the following control bits: - * FORCECFGMODE : 1 - * CFGMODE : 0 - * CFGSTART : 0 + * FORCECFGMODE : 1 + * CFGMODE : 0 + * CFGSTART : 0 */ -# include -# include -# include -# include -# include +#include +#include +#include +#include +#include #ifdef CONFIG_SYSTEMACE @@ -57,18 +56,18 @@ static unsigned ace_readw(unsigned offset) { #if (CFG_SYSTEMACE_WIDTH == 8) - u16 temp; + u16 temp; #if !defined(__BIG_ENDIAN) - temp =((u16)readb(CFG_SYSTEMACE_BASE+offset) << 8); - temp |= (u16)readb(CFG_SYSTEMACE_BASE+offset+1); + temp = ((u16) readb(CFG_SYSTEMACE_BASE + offset) << 8); + temp |= (u16) readb(CFG_SYSTEMACE_BASE + offset + 1); #else - temp = (u16)readb(CFG_SYSTEMACE_BASE+offset); - temp |=((u16)readb(CFG_SYSTEMACE_BASE+offset+1) << 8); + temp = (u16) readb(CFG_SYSTEMACE_BASE + offset); + temp |= ((u16) readb(CFG_SYSTEMACE_BASE + offset + 1) << 8); #endif - return temp; + return temp; #else - return readw(CFG_SYSTEMACE_BASE+offset); + return readw(CFG_SYSTEMACE_BASE + offset); #endif } @@ -76,73 +75,72 @@ static void ace_writew(unsigned val, unsigned offset) { #if (CFG_SYSTEMACE_WIDTH == 8) #if !defined(__BIG_ENDIAN) - writeb((u8)(val>>8), CFG_SYSTEMACE_BASE+offset); - writeb((u8)val, CFG_SYSTEMACE_BASE+offset+1); + writeb((u8) (val >> 8), CFG_SYSTEMACE_BASE + offset); + writeb((u8) val, CFG_SYSTEMACE_BASE + offset + 1); #else - writeb((u8)val, CFG_SYSTEMACE_BASE+offset); - writeb((u8)(val>>8), CFG_SYSTEMACE_BASE+offset+1); + writeb((u8) val, CFG_SYSTEMACE_BASE + offset); + writeb((u8) (val >> 8), CFG_SYSTEMACE_BASE + offset + 1); #endif #else - writew(val, CFG_SYSTEMACE_BASE+offset); + writew(val, CFG_SYSTEMACE_BASE + offset); #endif } /* */ -static unsigned long systemace_read(int dev, - unsigned long start, - unsigned long blkcnt, - unsigned long *buffer); +static unsigned long systemace_read(int dev, unsigned long start, + unsigned long blkcnt, + unsigned long *buffer); -static block_dev_desc_t systemace_dev = {0}; +static block_dev_desc_t systemace_dev = { 0 }; static int get_cf_lock(void) { - int retry = 10; + int retry = 10; /* CONTROLREG = LOCKREG */ - unsigned val=ace_readw(0x18); - val|=0x0002; - ace_writew((val&0xffff), 0x18); + unsigned val = ace_readw(0x18); + val |= 0x0002; + ace_writew((val & 0xffff), 0x18); /* Wait for MPULOCK in STATUSREG[15:0] */ - while (! (ace_readw(0x04) & 0x0002)) { + while (!(ace_readw(0x04) & 0x0002)) { - if (retry < 0) - return -1; + if (retry < 0) + return -1; - udelay(100000); - retry -= 1; - } + udelay(100000); + retry -= 1; + } - return 0; + return 0; } static void release_cf_lock(void) { - unsigned val=ace_readw(0x18); - val&=~(0x0002); - ace_writew((val&0xffff), 0x18); + unsigned val = ace_readw(0x18); + val &= ~(0x0002); + ace_writew((val & 0xffff), 0x18); } -block_dev_desc_t * systemace_get_dev(int dev) +block_dev_desc_t *systemace_get_dev(int dev) { /* The first time through this, the systemace_dev object is not yet initialized. In that case, fill it in. */ - if (systemace_dev.blksz == 0) { - systemace_dev.if_type = IF_TYPE_UNKNOWN; - systemace_dev.dev = 0; - systemace_dev.part_type = PART_TYPE_UNKNOWN; - systemace_dev.type = DEV_TYPE_HARDDISK; - systemace_dev.blksz = 512; - systemace_dev.removable = 1; - systemace_dev.block_read = systemace_read; + if (systemace_dev.blksz == 0) { + systemace_dev.if_type = IF_TYPE_UNKNOWN; + systemace_dev.dev = 0; + systemace_dev.part_type = PART_TYPE_UNKNOWN; + systemace_dev.type = DEV_TYPE_HARDDISK; + systemace_dev.blksz = 512; + systemace_dev.removable = 1; + systemace_dev.block_read = systemace_read; - init_part(&systemace_dev); + init_part(&systemace_dev); - } + } - return &systemace_dev; + return &systemace_dev; } /* @@ -150,118 +148,117 @@ block_dev_desc_t * systemace_get_dev(int dev) * the dev_desc) to read blocks of data. The return value is the * number of blocks read. A zero return indicates an error. */ -static unsigned long systemace_read(int dev, - unsigned long start, - unsigned long blkcnt, - unsigned long *buffer) +static unsigned long systemace_read(int dev, unsigned long start, + unsigned long blkcnt, unsigned long *buffer) { - int retry; - unsigned blk_countdown; - unsigned char*dp = (unsigned char*)buffer; - unsigned val; + int retry; + unsigned blk_countdown; + unsigned char *dp = (unsigned char *)buffer; + unsigned val; - if (get_cf_lock() < 0) { - unsigned status = ace_readw(0x04); + if (get_cf_lock() < 0) { + unsigned status = ace_readw(0x04); - /* If CFDETECT is false, card is missing. */ - if (! (status&0x0010)) { - printf("** CompactFlash card not present. **\n"); - return 0; - } - - printf("**** ACE locked away from me (STATUSREG=%04x)\n", status); - return 0; - } + /* If CFDETECT is false, card is missing. */ + if (!(status & 0x0010)) { + printf("** CompactFlash card not present. **\n"); + return 0; + } + printf("**** ACE locked away from me (STATUSREG=%04x)\n", + status); + return 0; + } #ifdef DEBUG_SYSTEMACE - printf("... systemace read %lu sectors at %lu\n", blkcnt, start); + printf("... systemace read %lu sectors at %lu\n", blkcnt, start); #endif - retry = 2000; - for (;;) { - val = ace_readw(0x04); + retry = 2000; + for (;;) { + val = ace_readw(0x04); - /* If CFDETECT is false, card is missing. */ - if (! (val & 0x0010)) { - printf("**** ACE CompactFlash not found.\n"); - release_cf_lock(); - return 0; - } + /* If CFDETECT is false, card is missing. */ + if (!(val & 0x0010)) { + printf("**** ACE CompactFlash not found.\n"); + release_cf_lock(); + return 0; + } - /* If RDYFORCMD, then we are ready to go. */ - if (val & 0x0100) - break; + /* If RDYFORCMD, then we are ready to go. */ + if (val & 0x0100) + break; - if (retry < 0) { - printf("**** SystemACE not ready.\n"); - release_cf_lock(); - return 0; - } + if (retry < 0) { + printf("**** SystemACE not ready.\n"); + release_cf_lock(); + return 0; + } - udelay(1000); - retry -= 1; - } + udelay(1000); + retry -= 1; + } /* The SystemACE can only transfer 256 sectors at a time, so limit the current chunk of sectors. The blk_countdown variable is the number of sectors left to transfer. */ - blk_countdown = blkcnt; - while (blk_countdown > 0) { - unsigned trans = blk_countdown; + blk_countdown = blkcnt; + while (blk_countdown > 0) { + unsigned trans = blk_countdown; - if (trans > 256) trans = 256; + if (trans > 256) + trans = 256; #ifdef DEBUG_SYSTEMACE - printf("... transfer %lu sector in a chunk\n", trans); + printf("... transfer %lu sector in a chunk\n", trans); #endif - /* Write LBA block address */ - ace_writew((start>> 0) & 0xffff, 0x10); - ace_writew((start>>16) & 0x00ff, 0x12); + /* Write LBA block address */ + ace_writew((start >> 0) & 0xffff, 0x10); + ace_writew((start >> 16) & 0x00ff, 0x12); - /* NOTE: in the Write Sector count below, a count of 0 - causes a transfer of 256, so &0xff gives the right - value for whatever transfer count we want. */ + /* NOTE: in the Write Sector count below, a count of 0 + causes a transfer of 256, so &0xff gives the right + value for whatever transfer count we want. */ - /* Write sector count | ReadMemCardData. */ - ace_writew((trans&0xff) | 0x0300, 0x14); + /* Write sector count | ReadMemCardData. */ + ace_writew((trans & 0xff) | 0x0300, 0x14); - /* Reset the configruation controller */ - val = ace_readw(0x18); - val|=0x0080; - ace_writew(val, 0x18); + /* Reset the configruation controller */ + val = ace_readw(0x18); + val |= 0x0080; + ace_writew(val, 0x18); - retry = trans * 16; - while (retry > 0) { - int idx; + retry = trans * 16; + while (retry > 0) { + int idx; - /* Wait for buffer to become ready. */ - while (! (ace_readw(0x04) & 0x0020)) { - udelay(100); - } + /* Wait for buffer to become ready. */ + while (!(ace_readw(0x04) & 0x0020)) { + udelay(100); + } - /* Read 16 words of 2bytes from the sector buffer. */ - for (idx = 0 ; idx < 16 ; idx += 1) { - unsigned short val = ace_readw(0x40); - *dp++ = val & 0xff; - *dp++ = (val>>8) & 0xff; - } + /* Read 16 words of 2bytes from the sector buffer. */ + for (idx = 0; idx < 16; idx += 1) { + unsigned short val = ace_readw(0x40); + *dp++ = val & 0xff; + *dp++ = (val >> 8) & 0xff; + } - retry -= 1; - } + retry -= 1; + } - /* Clear the configruation controller reset */ - val = ace_readw(0x18); - val&=~0x0080; - ace_writew(val, 0x18); + /* Clear the configruation controller reset */ + val = ace_readw(0x18); + val &= ~0x0080; + ace_writew(val, 0x18); - /* Count the blocks we transfer this time. */ - start += trans; - blk_countdown -= trans; - } + /* Count the blocks we transfer this time. */ + start += trans; + blk_countdown -= trans; + } - release_cf_lock(); + release_cf_lock(); - return blkcnt; + return blkcnt; } -#endif /* CONFIG_SYSTEMACE */ +#endif /* CONFIG_SYSTEMACE */ From 3a8ce9af6fcb5744a7851b4440c07688acc40844 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:23 +0100 Subject: [PATCH 11/30] [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c The code in this file is not a command; it is a device driver. Put it in the correct place. There are zero functional changes in this patch, it only moves the file. Signed-off-by: Grant Likely --- common/Makefile | 3 +-- drivers/Makefile | 2 +- common/cmd_ace.c => drivers/systemace.c | 0 3 files changed, 2 insertions(+), 3 deletions(-) rename common/cmd_ace.c => drivers/systemace.c (100%) diff --git a/common/Makefile b/common/Makefile index 0106088e24..6f81c4abcf 100644 --- a/common/Makefile +++ b/common/Makefile @@ -27,8 +27,7 @@ LIB = $(obj)libcommon.a AOBJS = -COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ - cmd_ace.o cmd_autoscript.o \ +COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o cmd_autoscript.o \ cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \ cmd_cache.o cmd_console.o \ cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \ diff --git a/drivers/Makefile b/drivers/Makefile index 5a369df2c4..fffc22a5e1 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -44,7 +44,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o atmel_usart.o \ serial.o serial_max3100.o \ serial_pl010.o serial_pl011.o serial_xuartlite.o \ sl811_usb.o sm501.o smc91111.o smiLynxEM.o \ - status_led.o sym53c8xx.o ahci.o \ + status_led.o sym53c8xx.o systemace.o ahci.o \ ti_pci1410a.o tigon3.o tsec.o \ usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \ videomodes.o w83c553f.o \ diff --git a/common/cmd_ace.c b/drivers/systemace.c similarity index 100% rename from common/cmd_ace.c rename to drivers/systemace.c From f4852ebe6ca946a509667eb68be42026f837be76 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:31 +0100 Subject: [PATCH 12/30] [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros Register read/write does not need to be wrapped in a full function. The patch replaces them with macros. Signed-off-by: Grant Likely --- drivers/systemace.c | 36 ++++++++++-------------------------- 1 file changed, 10 insertions(+), 26 deletions(-) diff --git a/drivers/systemace.c b/drivers/systemace.c index 8dd98d03fb..3f329f9708 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -53,38 +53,22 @@ * to be the base address for the chip, usually in the local * peripheral bus. */ -static unsigned ace_readw(unsigned offset) -{ -#if (CFG_SYSTEMACE_WIDTH == 8) - u16 temp; - -#if !defined(__BIG_ENDIAN) - temp = ((u16) readb(CFG_SYSTEMACE_BASE + offset) << 8); - temp |= (u16) readb(CFG_SYSTEMACE_BASE + offset + 1); -#else - temp = (u16) readb(CFG_SYSTEMACE_BASE + offset); - temp |= ((u16) readb(CFG_SYSTEMACE_BASE + offset + 1) << 8); -#endif - return temp; -#else - return readw(CFG_SYSTEMACE_BASE + offset); -#endif -} - -static void ace_writew(unsigned val, unsigned offset) -{ #if (CFG_SYSTEMACE_WIDTH == 8) #if !defined(__BIG_ENDIAN) - writeb((u8) (val >> 8), CFG_SYSTEMACE_BASE + offset); - writeb((u8) val, CFG_SYSTEMACE_BASE + offset + 1); +#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \ + (readb(CFG_SYSTEMACE_BASE+off+1))) +#define ace_write(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \ + writeb(val, CFG_SYSTEMACE_BASE+off+1);} #else - writeb((u8) val, CFG_SYSTEMACE_BASE + offset); - writeb((u8) (val >> 8), CFG_SYSTEMACE_BASE + offset + 1); +#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \ + (readb(CFG_SYSTEMACE_BASE+off+1)<<8)) +#define ace_write(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \ + writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);} #endif #else - writew(val, CFG_SYSTEMACE_BASE + offset); +#define ace_readw(off) (readw(CFG_SYSTEMACE_BASE+off)) +#define ace_writew(val, off) (writew(val, CFG_SYSTEMACE_BASE+off)) #endif -} /* */ From 53758fa20e935cc87eeb0519ed365df753a6f289 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:38 +0100 Subject: [PATCH 13/30] [PATCH 8_9] Add block_write hook to block_dev_desc_t Preparation for future patches which support block device writing Signed-off-by: Grant Likely --- include/part.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/part.h b/include/part.h index f89ebc6e73..4f5a570795 100644 --- a/include/part.h +++ b/include/part.h @@ -45,6 +45,10 @@ typedef struct block_dev_desc { unsigned long start, lbaint_t blkcnt, unsigned long *buffer); + unsigned long (*block_write)(int dev, + unsigned long start, + lbaint_t blkcnt, + const void *buffer); }block_dev_desc_t; /* Interface types: */ From eb867a76238fb38e952c37871b16d0d7fd61c95f Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Tue, 20 Feb 2007 09:05:45 +0100 Subject: [PATCH 14/30] [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers Block device read/write is anonymous data; there is no need to use a typed pointer. void * is fine. Also add a hook for block_read functions Signed-off-by: Grant Likely --- common/cmd_ide.c | 8 ++++---- common/cmd_scsi.c | 4 ++-- common/usb_storage.c | 4 ++-- cpu/pxa/mmc.c | 2 +- drivers/systemace.c | 7 +++---- include/ide.h | 4 ++-- include/part.h | 2 +- 7 files changed, 15 insertions(+), 16 deletions(-) diff --git a/common/cmd_ide.c b/common/cmd_ide.c index ebc080c72a..2e185cc441 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -188,7 +188,7 @@ static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len #ifdef CONFIG_ATAPI static void atapi_inquiry(block_dev_desc_t *dev_desc); -ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); +ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer); #endif @@ -1233,7 +1233,7 @@ static void ide_ident (block_dev_desc_t *dev_desc) /* ------------------------------------------------------------------------- */ -ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) +ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) { ulong n = 0; unsigned char c; @@ -1353,7 +1353,7 @@ IDE_READ_E: /* ------------------------------------------------------------------------- */ -ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) +ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer) { ulong n = 0; unsigned char c; @@ -2015,7 +2015,7 @@ static void atapi_inquiry(block_dev_desc_t * dev_desc) #define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */ #define ATAPI_READ_MAX_BLOCK ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE /* max blocks */ -ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer) +ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) { ulong n = 0; unsigned char ccb[12]; /* Command descriptor block */ diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index b17bebbacf..da36ed9e1d 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -74,7 +74,7 @@ void scsi_setup_inquiry(ccb * pccb); void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len); -ulong scsi_read(int device, ulong blknr, ulong blkcnt, ulong *buffer); +ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer); /********************************************************************************* @@ -424,7 +424,7 @@ int do_scsi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */ -ulong scsi_read(int device, ulong blknr, ulong blkcnt, ulong *buffer) +ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer) { ulong start,blks, buf_addr; unsigned short smallblks; diff --git a/common/usb_storage.c b/common/usb_storage.c index b4b7914089..196ceb7359 100644 --- a/common/usb_storage.c +++ b/common/usb_storage.c @@ -169,7 +169,7 @@ static struct us_data usb_stor[USB_MAX_STOR_DEV]; int usb_stor_get_info(struct usb_device *dev, struct us_data *us, block_dev_desc_t *dev_desc); int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data *ss); -unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer); +unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer); struct usb_device * usb_get_dev_index(int index); void uhci_show_temp_int_td(void); @@ -941,7 +941,7 @@ static void usb_bin_fixup(struct usb_device_descriptor descriptor, #define USB_MAX_READ_BLK 20 -unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer) +unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, void *buffer) { unsigned long start,blks, buf_addr; unsigned short smallblks; diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index c57d0d5c32..0fbaa162fa 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -363,7 +363,7 @@ mmc_write(uchar *src, ulong dst, int size) ulong /****************************************************/ -mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst) +mmc_bread(int dev_num, ulong blknr, ulong blkcnt, void *dst) /****************************************************/ { int mmc_block_size = MMC_BLOCK_SIZE; diff --git a/drivers/systemace.c b/drivers/systemace.c index 3f329f9708..9502623a74 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -73,8 +73,7 @@ /* */ static unsigned long systemace_read(int dev, unsigned long start, - unsigned long blkcnt, - unsigned long *buffer); + unsigned long blkcnt, void *buffer); static block_dev_desc_t systemace_dev = { 0 }; @@ -133,11 +132,11 @@ block_dev_desc_t *systemace_get_dev(int dev) * number of blocks read. A zero return indicates an error. */ static unsigned long systemace_read(int dev, unsigned long start, - unsigned long blkcnt, unsigned long *buffer) + unsigned long blkcnt, void *buffer) { int retry; unsigned blk_countdown; - unsigned char *dp = (unsigned char *)buffer; + unsigned char *dp = buffer; unsigned val; if (get_cf_lock() < 0) { diff --git a/include/ide.h b/include/ide.h index e29ed36de0..6976a6c319 100644 --- a/include/ide.h +++ b/include/ide.h @@ -49,7 +49,7 @@ typedef ulong lbaint_t; */ void ide_init(void); -ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); -ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, ulong *buffer); +ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer); +ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, void *buffer); #endif /* _IDE_H */ diff --git a/include/part.h b/include/part.h index 4f5a570795..29c03205f2 100644 --- a/include/part.h +++ b/include/part.h @@ -44,7 +44,7 @@ typedef struct block_dev_desc { unsigned long (*block_read)(int dev, unsigned long start, lbaint_t blkcnt, - unsigned long *buffer); + void *buffer); unsigned long (*block_write)(int dev, unsigned long start, lbaint_t blkcnt, From 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 10:27:08 +0100 Subject: [PATCH 15/30] [PATCH] PPC4xx: Add support for multiple I2C busses This patch adds support for multiple I2C busses on the PPC4xx platforms. Define CONFIG_I2C_MULTI_BUS in the board config file to make use of this feature. It also merges the 405 and 440 i2c header files into one common file 4xx_i2c.h. Also the 4xx i2c reset procedure is reworked since I experienced some problems with the first access on the 440SPe Katmai board. Signed-off-by: Stefan Roese --- board/cray/L1/L1.c | 2 +- board/esd/du405/du405.c | 2 +- board/mpl/common/memtst.c | 2 +- board/mpl/mip405/mip405.c | 2 +- board/sandburst/common/ppc440gx_i2c.c | 7 +- board/sandburst/common/ppc440gx_i2c.h | 6 +- cpu/ppc4xx/i2c.c | 454 ++++++++++++++------------ include/405gp_i2c.h | 64 ---- include/440_i2c.h | 71 ---- include/4xx_i2c.h | 122 +++++++ include/i2c.h | 10 + 11 files changed, 381 insertions(+), 361 deletions(-) delete mode 100644 include/405gp_i2c.h delete mode 100644 include/440_i2c.h create mode 100644 include/4xx_i2c.h diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c index a7114eb074..a0fac7fe5a 100644 --- a/board/cray/L1/L1.c +++ b/board/cray/L1/L1.c @@ -23,7 +23,7 @@ #include #include -#include <405gp_i2c.h> +#include <4xx_i2c.h> #include #include #include diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c index a019ce4215..69432138d3 100644 --- a/board/esd/du405/du405.c +++ b/board/esd/du405/du405.c @@ -25,7 +25,7 @@ #include "du405.h" #include #include -#include <405gp_i2c.h> +#include <4xx_i2c.h> #include DECLARE_GLOBAL_DATA_PTR; diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c index ff1190ab21..1d28513d87 100644 --- a/board/mpl/common/memtst.c +++ b/board/mpl/common/memtst.c @@ -48,7 +48,7 @@ int testdram (void) #include #include -#include <405gp_i2c.h> +#include <4xx_i2c.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 34f328999d..4dbf4926c2 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -65,7 +65,7 @@ #include #include "mip405.h" #include -#include <405gp_i2c.h> +#include <4xx_i2c.h> #include #include "../common/common_util.h" #include diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c index 859dd7afe5..1e3dffb1ee 100644 --- a/board/sandburst/common/ppc440gx_i2c.c +++ b/board/sandburst/common/ppc440gx_i2c.c @@ -27,13 +27,8 @@ */ #include #include -#if defined(CONFIG_440) -# include <440_i2c.h> -#else -# include <405gp_i2c.h> -#endif +#include <4xx_i2c.h> #include -#include <440_i2c.h> #include #include "ppc440gx_i2c.h" diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h index cd4fc86661..10000f5ba9 100644 --- a/board/sandburst/common/ppc440gx_i2c.h +++ b/board/sandburst/common/ppc440gx_i2c.h @@ -27,11 +27,7 @@ */ #include #include -#if defined(CONFIG_440) -# include <440_i2c.h> -#else -# include <405gp_i2c.h> -#endif +#include <4xx_i2c.h> #include #ifdef CONFIG_HARD_I2C diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 7db1cd8046..0b056a15de 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -1,91 +1,100 @@ -/*****************************************************************************/ -/* I2C Bus interface initialisation and I2C Commands */ -/* for PPC405GP */ -/* Author : AS HARNOIS */ -/* Date : 13.Dec.00 */ -/*****************************************************************************/ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * based on work by Anne Sophie Harnois + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ #include #include -#if defined(CONFIG_440) -# include <440_i2c.h> -#else -# include <405gp_i2c.h> -#endif +#include <4xx_i2c.h> #include +#include #ifdef CONFIG_HARD_I2C DECLARE_GLOBAL_DATA_PTR; -#define IIC_OK 0 -#define IIC_NOK 1 -#define IIC_NOK_LA 2 /* Lost arbitration */ -#define IIC_NOK_ICT 3 /* Incomplete transfer */ -#define IIC_NOK_XFRA 4 /* Transfer aborted */ -#define IIC_NOK_DATA 5 /* No data in buffer */ -#define IIC_NOK_TOUT 6 /* Transfer timeout */ +#if defined(CONFIG_I2C_MULTI_BUS) +/* Initialize the bus pointer to whatever one the SPD EEPROM is on. + * Default is bus 0. This is necessary because the DDR initialization + * runs from ROM, and we can't switch buses because we can't modify + * the global variables. + */ +#ifdef CFG_SPD_BUS_NUM +static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM; +#else +static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0; +#endif +#endif /* CONFIG_I2C_MULTI_BUS */ -#define IIC_TIMEOUT 1 /* 1 seconde */ - - -static void _i2c_bus_reset (void) +static void _i2c_bus_reset(void) { - int i, status; + int i; + u8 dc; /* Reset status register */ /* write 1 in SCMP and IRQA to clear these fields */ - out8 (IIC_STS, 0x0A); + out_8((u8 *)IIC_STS, 0x0A); /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */ - out8 (IIC_EXTSTS, 0x8F); - __asm__ volatile ("eieio"); + out_8((u8 *)IIC_EXTSTS, 0x8F); - /* - * Get current state, reset bus - * only if no transfers are pending. - */ - i = 10; - do { - /* Get status */ - status = in8 (IIC_STS); - udelay (500); /* 500us */ - i--; - } while ((status & IIC_STS_PT) && (i > 0)); - /* Soft reset controller */ - status = in8 (IIC_XTCNTLSS); - out8 (IIC_XTCNTLSS, (status | IIC_XTCNTLSS_SRST)); - __asm__ volatile ("eieio"); + /* Place chip in the reset state */ + out_8((u8 *)IIC_XTCNTLSS, IIC_XTCNTLSS_SRST); - /* make sure where in initial state, data hi, clock hi */ - out8 (IIC_DIRECTCNTL, 0xC); - for (i = 0; i < 10; i++) { - if ((in8 (IIC_DIRECTCNTL) & 0x3) != 0x3) { - /* clock until we get to known state */ - out8 (IIC_DIRECTCNTL, 0x8); /* clock lo */ - udelay (100); /* 100us */ - out8 (IIC_DIRECTCNTL, 0xC); /* clock hi */ - udelay (100); /* 100us */ - } else { - break; + /* Check if bus is free */ + dc = in_8((u8 *)IIC_DIRECTCNTL); + if (!DIRCTNL_FREE(dc)){ + /* Try to set bus free state */ + out_8((u8 *)IIC_DIRECTCNTL, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC); + + /* Wait until we regain bus control */ + for (i = 0; i < 100; ++i) { + dc = in_8((u8 *)IIC_DIRECTCNTL); + if (DIRCTNL_FREE(dc)) + break; + + /* Toggle SCL line */ + dc ^= IIC_DIRCNTL_SCC; + out_8((u8 *)IIC_DIRECTCNTL, dc); + udelay(10); + dc ^= IIC_DIRCNTL_SCC; + out_8((u8 *)IIC_DIRECTCNTL, dc); } } - /* send start condition */ - out8 (IIC_DIRECTCNTL, 0x4); - udelay (1000); /* 1ms */ - /* send stop condition */ - out8 (IIC_DIRECTCNTL, 0xC); - udelay (1000); /* 1ms */ - /* Unreset controller */ - out8 (IIC_XTCNTLSS, (status & ~IIC_XTCNTLSS_SRST)); - udelay (1000); /* 1ms */ + + /* Remove reset */ + out_8((u8 *)IIC_XTCNTLSS, 0); } -void i2c_init (int speed, int slaveadd) +void i2c_init(int speed, int slaveadd) { sys_info_t sysInfo; unsigned long freqOPB; int val, divisor; + int bus; #ifdef CFG_I2C_INIT_BOARD /* call board specific i2c bus reset routine before accessing the */ @@ -94,101 +103,100 @@ void i2c_init (int speed, int slaveadd) i2c_init_board(); #endif - /* Handle possible failed I2C state */ - /* FIXME: put this into i2c_init_board()? */ - _i2c_bus_reset (); + for (bus = 0; bus < CFG_MAX_I2C_BUS; bus++) { + I2C_SET_BUS(bus); - /* clear lo master address */ - out8 (IIC_LMADR, 0); + /* Handle possible failed I2C state */ + /* FIXME: put this into i2c_init_board()? */ + _i2c_bus_reset(); - /* clear hi master address */ - out8 (IIC_HMADR, 0); + /* clear lo master address */ + out_8((u8 *)IIC_LMADR, 0); - /* clear lo slave address */ - out8 (IIC_LSADR, 0); + /* clear hi master address */ + out_8((u8 *)IIC_HMADR, 0); - /* clear hi slave address */ - out8 (IIC_HSADR, 0); + /* clear lo slave address */ + out_8((u8 *)IIC_LSADR, 0); - /* Clock divide Register */ - /* get OPB frequency */ - get_sys_info (&sysInfo); - freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv; - /* set divisor according to freqOPB */ - divisor = (freqOPB - 1) / 10000000; - if (divisor == 0) - divisor = 1; - out8 (IIC_CLKDIV, divisor); + /* clear hi slave address */ + out_8((u8 *)IIC_HSADR, 0); - /* no interrupts */ - out8 (IIC_INTRMSK, 0); + /* Clock divide Register */ + /* get OPB frequency */ + get_sys_info(&sysInfo); + freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv; + /* set divisor according to freqOPB */ + divisor = (freqOPB - 1) / 10000000; + if (divisor == 0) + divisor = 1; + out_8((u8 *)IIC_CLKDIV, divisor); - /* clear transfer count */ - out8 (IIC_XFRCNT, 0); + /* no interrupts */ + out_8((u8 *)IIC_INTRMSK, 0); - /* clear extended control & stat */ - /* write 1 in SRC SRS SWC SWS to clear these fields */ - out8 (IIC_XTCNTLSS, 0xF0); + /* clear transfer count */ + out_8((u8 *)IIC_XFRCNT, 0); - /* Mode Control Register - Flush Slave/Master data buffer */ - out8 (IIC_MDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - __asm__ volatile ("eieio"); + /* clear extended control & stat */ + /* write 1 in SRC SRS SWC SWS to clear these fields */ + out_8((u8 *)IIC_XTCNTLSS, 0xF0); + /* Mode Control Register + Flush Slave/Master data buffer */ + out_8((u8 *)IIC_MDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - val = in8(IIC_MDCNTL); - __asm__ volatile ("eieio"); + val = in_8((u8 *)IIC_MDCNTL); - /* Ignore General Call, slave transfers are ignored, - disable interrupts, exit unknown bus state, enable hold - SCL - 100kHz normaly or FastMode for 400kHz and above - */ + /* Ignore General Call, slave transfers are ignored, + * disable interrupts, exit unknown bus state, enable hold + * SCL 100kHz normaly or FastMode for 400kHz and above + */ - val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL; - if( speed >= 400000 ){ - val |= IIC_MDCNTL_FSM; + val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL; + if (speed >= 400000) + val |= IIC_MDCNTL_FSM; + out_8((u8 *)IIC_MDCNTL, val); + + /* clear control reg */ + out_8((u8 *)IIC_CNTL, 0x00); } - out8 (IIC_MDCNTL, val); - - /* clear control reg */ - out8 (IIC_CNTL, 0x00); - __asm__ volatile ("eieio"); + /* set to SPD bus as default bus upon powerup */ + I2C_SET_BUS(CFG_SPD_BUS_NUM); } /* - This code tries to use the features of the 405GP i2c - controller. It will transfer up to 4 bytes in one pass - on the loop. It only does out8(lbz) to the buffer when it - is possible to do out16(lhz) transfers. - - cmd_type is 0 for write 1 for read. - - addr_len can take any value from 0-255, it is only limited - by the char, we could make it larger if needed. If it is - 0 we skip the address write cycle. - - Typical case is a Write of an addr followd by a Read. The - IBM FAQ does not cover this. On the last byte of the write - we don't set the creg CHT bit, and on the first bytes of the - read we set the RPST bit. - - It does not support address only transfers, there must be - a data part. If you want to write the address yourself, put - it in the data pointer. - - It does not support transfer to/from address 0. - - It does not check XFRCNT. -*/ -static -int i2c_transfer(unsigned char cmd_type, - unsigned char chip, - unsigned char addr[], - unsigned char addr_len, - unsigned char data[], - unsigned short data_len ) + * This code tries to use the features of the 405GP i2c + * controller. It will transfer up to 4 bytes in one pass + * on the loop. It only does out_8((u8 *)lbz) to the buffer when it + * is possible to do out16(lhz) transfers. + * + * cmd_type is 0 for write 1 for read. + * + * addr_len can take any value from 0-255, it is only limited + * by the char, we could make it larger if needed. If it is + * 0 we skip the address write cycle. + * + * Typical case is a Write of an addr followd by a Read. The + * IBM FAQ does not cover this. On the last byte of the write + * we don't set the creg CHT bit, and on the first bytes of the + * read we set the RPST bit. + * + * It does not support address only transfers, there must be + * a data part. If you want to write the address yourself, put + * it in the data pointer. + * + * It does not support transfer to/from address 0. + * + * It does not check XFRCNT. + */ +static int i2c_transfer(unsigned char cmd_type, + unsigned char chip, + unsigned char addr[], + unsigned char addr_len, + unsigned char data[], + unsigned short data_len) { unsigned char* ptr; int reading; @@ -198,97 +206,88 @@ int i2c_transfer(unsigned char cmd_type, int i; uchar creg; - if( data == 0 || data_len == 0 ){ - /*Don't support data transfer of no length or to address 0*/ + if (data == 0 || data_len == 0) { + /* Don't support data transfer of no length or to address 0 */ printf( "i2c_transfer: bad call\n" ); return IIC_NOK; } - if( addr && addr_len ){ + if (addr && addr_len) { ptr = addr; cnt = addr_len; reading = 0; - }else{ + } else { ptr = data; cnt = data_len; reading = cmd_type; } - /*Clear Stop Complete Bit*/ - out8(IIC_STS,IIC_STS_SCMP); + /* Clear Stop Complete Bit */ + out_8((u8 *)IIC_STS, IIC_STS_SCMP); /* Check init */ - i=10; + i = 10; do { /* Get status */ - status = in8(IIC_STS); - __asm__ volatile("eieio"); + status = in_8((u8 *)IIC_STS); i--; - } while ((status & IIC_STS_PT) && (i>0)); + } while ((status & IIC_STS_PT) && (i > 0)); if (status & IIC_STS_PT) { result = IIC_NOK_TOUT; return(result); } - /*flush the Master/Slave Databuffers*/ - out8(IIC_MDCNTL, ((in8(IIC_MDCNTL))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB)); - /*need to wait 4 OPB clocks? code below should take that long*/ + /* flush the Master/Slave Databuffers */ + out_8((u8 *)IIC_MDCNTL, ((in_8((u8 *)IIC_MDCNTL))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB)); + /* need to wait 4 OPB clocks? code below should take that long */ /* 7-bit adressing */ - out8(IIC_HMADR,0); - out8(IIC_LMADR, chip); - __asm__ volatile("eieio"); + out_8((u8 *)IIC_HMADR, 0); + out_8((u8 *)IIC_LMADR, chip); tran = 0; result = IIC_OK; creg = 0; - while ( tran != cnt && (result == IIC_OK)) { + while (tran != cnt && (result == IIC_OK)) { int bc,j; /* Control register = - Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start, - Transfer is a sequence of transfers - */ + * Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start, + * Transfer is a sequence of transfers + */ creg |= IIC_CNTL_PT; - bc = (cnt - tran) > 4 ? 4 : - cnt - tran; - creg |= (bc-1)<<4; - /* if the real cmd type is write continue trans*/ - if ( (!cmd_type && (ptr == addr)) || ((tran+bc) != cnt) ) + bc = (cnt - tran) > 4 ? 4 : cnt - tran; + creg |= (bc - 1) << 4; + /* if the real cmd type is write continue trans */ + if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt)) creg |= IIC_CNTL_CHT; if (reading) creg |= IIC_CNTL_READ; - else { - for(j=0; j0)); + } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) && (i > 0)); if (status & IIC_STS_ERR) { result = IIC_NOK; - status = in8 (IIC_EXTSTS); + status = in_8((u8 *)IIC_EXTSTS); /* Lost arbitration? */ if (status & IIC_EXTSTS_LA) result = IIC_NOK_LA; @@ -306,34 +305,32 @@ int i2c_transfer(unsigned char cmd_type, /* Are there data in buffer */ if (status & IIC_STS_MDBS) { /* - even if we have data we have to wait 4OPB clocks - for it to hit the front of the FIFO, after that - we can just read. We should check XFCNT here and - if the FIFO is full there is no need to wait. - */ - udelay (1); - for(j=0;jed (i.e. there was a chip at that address which * drove the data line low). */ - return(i2c_transfer (1, chip << 1, 0,0, buf, 1) != 0); + return (i2c_transfer(1, chip << 1, 0,0, buf, 1) != 0); } -int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) +int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) { uchar xaddr[4]; int ret; - if ( alen > 4 ) { + if (alen > 4) { printf ("I2C read: addr len %d not supported\n", alen); return 1; } - if ( alen > 0 ) { + if (alen > 0) { xaddr[0] = (addr >> 24) & 0xFF; xaddr[1] = (addr >> 16) & 0xFF; xaddr[2] = (addr >> 8) & 0xFF; @@ -378,10 +375,10 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) * still be one byte because the extra address bits are * hidden in the chip address. */ - if( alen > 0 ) + if (alen > 0) chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); #endif - if( (ret = i2c_transfer( 1, chip<<1, &xaddr[4-alen], alen, buffer, len )) != 0) { + if ((ret = i2c_transfer(1, chip<<1, &xaddr[4-alen], alen, buffer, len)) != 0) { if (gd->have_console) printf( "I2c read: failed %d\n", ret); return 1; @@ -389,16 +386,17 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) return 0; } -int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) +int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) { uchar xaddr[4]; - if ( alen > 4 ) { + if (alen > 4) { printf ("I2C write: addr len %d not supported\n", alen); return 1; } - if ( alen > 0 ) { + + if (alen > 0) { xaddr[0] = (addr >> 24) & 0xFF; xaddr[1] = (addr >> 16) & 0xFF; xaddr[2] = (addr >> 8) & 0xFF; @@ -417,11 +415,11 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len) * still be one byte because the extra address bits are * hidden in the chip address. */ - if( alen > 0 ) + if (alen > 0) chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); #endif - return (i2c_transfer( 0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); + return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); } /*----------------------------------------------------------------------- @@ -433,7 +431,7 @@ uchar i2c_reg_read(uchar i2c_addr, uchar reg) i2c_read(i2c_addr, reg, 1, &buf, 1); - return(buf); + return (buf); } /*----------------------------------------------------------------------- @@ -443,4 +441,38 @@ void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) { i2c_write(i2c_addr, reg, 1, &val, 1); } + +#if defined(CONFIG_I2C_MULTI_BUS) +/* + * Functions for multiple I2C bus handling + */ +unsigned int i2c_get_bus_num(void) +{ + return i2c_bus_num; +} + +int i2c_set_bus_num(unsigned int bus) +{ + if (bus >= CFG_MAX_I2C_BUS) + return -1; + + i2c_bus_num = bus; + + return 0; +} + +/* TODO: add 100/400k switching */ +unsigned int i2c_get_bus_speed(void) +{ + return CFG_I2C_SPEED; +} + +int i2c_set_bus_speed(unsigned int speed) +{ + if (speed != CFG_I2C_SPEED) + return -1; + + return 0; +} +#endif /* CONFIG_I2C_MULTI_BUS */ #endif /* CONFIG_HARD_I2C */ diff --git a/include/405gp_i2c.h b/include/405gp_i2c.h deleted file mode 100644 index 5a9a497536..0000000000 --- a/include/405gp_i2c.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef _405gp_i2c_h_ -#define _405gp_i2c_h_ - -#define I2C_REGISTERS_BASE_ADDRESS 0xEF600500 -#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) -#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF) -#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR) -#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR) -#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL) -#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL) -#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS) -#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) -#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) -#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) -#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV) -#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) -#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) -#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) -#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL) - -/* MDCNTL Register Bit definition */ -#define IIC_MDCNTL_HSCL 0x01 -#define IIC_MDCNTL_EUBS 0x02 -#define IIC_MDCNTL_EINT 0x04 -#define IIC_MDCNTL_ESM 0x08 -#define IIC_MDCNTL_FSM 0x10 -#define IIC_MDCNTL_EGC 0x20 -#define IIC_MDCNTL_FMDB 0x40 -#define IIC_MDCNTL_FSDB 0x80 - -/* CNTL Register Bit definition */ -#define IIC_CNTL_PT 0x01 -#define IIC_CNTL_READ 0x02 -#define IIC_CNTL_CHT 0x04 -#define IIC_CNTL_RPST 0x08 -/* bit 2/3 for Transfer count*/ -#define IIC_CNTL_AMD 0x40 -#define IIC_CNTL_HMT 0x80 - -/* STS Register Bit definition */ -#define IIC_STS_PT 0X01 -#define IIC_STS_IRQA 0x02 -#define IIC_STS_ERR 0X04 -#define IIC_STS_SCMP 0x08 -#define IIC_STS_MDBF 0x10 -#define IIC_STS_MDBS 0X20 -#define IIC_STS_SLPR 0x40 -#define IIC_STS_SSS 0x80 - -/* EXTSTS Register Bit definition */ -#define IIC_EXTSTS_XFRA 0X01 -#define IIC_EXTSTS_ICT 0X02 -#define IIC_EXTSTS_LA 0X04 - -/* XTCNTLSS Register Bit definition */ -#define IIC_XTCNTLSS_SRST 0x01 -#define IIC_XTCNTLSS_EPI 0x02 -#define IIC_XTCNTLSS_SDBF 0x04 -#define IIC_XTCNTLSS_SBDD 0x08 -#define IIC_XTCNTLSS_SWS 0x10 -#define IIC_XTCNTLSS_SWC 0x20 -#define IIC_XTCNTLSS_SRS 0x40 -#define IIC_XTCNTLSS_SRC 0x80 -#endif diff --git a/include/440_i2c.h b/include/440_i2c.h deleted file mode 100644 index 0c2bf36273..0000000000 --- a/include/440_i2c.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef _440_i2c_h_ -#define _440_i2c_h_ - -#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700) -#else -#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400) -#endif /*CONFIG_440EP CONFIG_440GR*/ - -#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR -#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) -#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF) -#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR) -#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR) -#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL) -#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL) -#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS) -#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) -#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) -#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) -#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV) -#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) -#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) -#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) -#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL) - -/* MDCNTL Register Bit definition */ -#define IIC_MDCNTL_HSCL 0x01 -#define IIC_MDCNTL_EUBS 0x02 -#define IIC_MDCNTL_EINT 0x04 -#define IIC_MDCNTL_ESM 0x08 -#define IIC_MDCNTL_FSM 0x10 -#define IIC_MDCNTL_EGC 0x20 -#define IIC_MDCNTL_FMDB 0x40 -#define IIC_MDCNTL_FSDB 0x80 - -/* CNTL Register Bit definition */ -#define IIC_CNTL_PT 0x01 -#define IIC_CNTL_READ 0x02 -#define IIC_CNTL_CHT 0x04 -#define IIC_CNTL_RPST 0x08 -/* bit 2/3 for Transfer count*/ -#define IIC_CNTL_AMD 0x40 -#define IIC_CNTL_HMT 0x80 - -/* STS Register Bit definition */ -#define IIC_STS_PT 0X01 -#define IIC_STS_IRQA 0x02 -#define IIC_STS_ERR 0X04 -#define IIC_STS_SCMP 0x08 -#define IIC_STS_MDBF 0x10 -#define IIC_STS_MDBS 0X20 -#define IIC_STS_SLPR 0x40 -#define IIC_STS_SSS 0x80 - -/* EXTSTS Register Bit definition */ -#define IIC_EXTSTS_XFRA 0X01 -#define IIC_EXTSTS_ICT 0X02 -#define IIC_EXTSTS_LA 0X04 - -/* XTCNTLSS Register Bit definition */ -#define IIC_XTCNTLSS_SRST 0x01 -#define IIC_XTCNTLSS_EPI 0x02 -#define IIC_XTCNTLSS_SDBF 0x04 -#define IIC_XTCNTLSS_SBDD 0x08 -#define IIC_XTCNTLSS_SWS 0x10 -#define IIC_XTCNTLSS_SWC 0x20 -#define IIC_XTCNTLSS_SRS 0x40 -#define IIC_XTCNTLSS_SRC 0x80 -#endif diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h new file mode 100644 index 0000000000..66b7997419 --- /dev/null +++ b/include/4xx_i2c.h @@ -0,0 +1,122 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _4xx_i2c_h_ +#define _4xx_i2c_h_ + +#define IIC_OK 0 +#define IIC_NOK 1 +#define IIC_NOK_LA 2 /* Lost arbitration */ +#define IIC_NOK_ICT 3 /* Incomplete transfer */ +#define IIC_NOK_XFRA 4 /* Transfer aborted */ +#define IIC_NOK_DATA 5 /* No data in buffer */ +#define IIC_NOK_TOUT 6 /* Transfer timeout */ + +#define IIC_TIMEOUT 1 /* 1 second */ + +#if defined(CONFIG_I2C_MULTI_BUS) +#define I2C_BUS_OFFS (i2c_bus_num * 0x100) +#else +#define I2C_BUS_OFFS (0x000) +#endif /* CONFIG_I2C_MULTI_BUS */ + +#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) +#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700 + I2C_BUS_OFFS) +#elif defined(CONFIG_440) +/* all remaining 440 variants */ +#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400 + I2C_BUS_OFFS) +#else +/* all 405 variants */ +#define I2C_BASE_ADDR (0xEF600500 + I2C_BUS_OFFS) +#endif + +#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR +#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) +#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF) +#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR) +#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR) +#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL) +#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL) +#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS) +#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) +#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) +#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) +#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV) +#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) +#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) +#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) +#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL) + +/* MDCNTL Register Bit definition */ +#define IIC_MDCNTL_HSCL 0x01 +#define IIC_MDCNTL_EUBS 0x02 +#define IIC_MDCNTL_EINT 0x04 +#define IIC_MDCNTL_ESM 0x08 +#define IIC_MDCNTL_FSM 0x10 +#define IIC_MDCNTL_EGC 0x20 +#define IIC_MDCNTL_FMDB 0x40 +#define IIC_MDCNTL_FSDB 0x80 + +/* CNTL Register Bit definition */ +#define IIC_CNTL_PT 0x01 +#define IIC_CNTL_READ 0x02 +#define IIC_CNTL_CHT 0x04 +#define IIC_CNTL_RPST 0x08 +/* bit 2/3 for Transfer count*/ +#define IIC_CNTL_AMD 0x40 +#define IIC_CNTL_HMT 0x80 + +/* STS Register Bit definition */ +#define IIC_STS_PT 0x01 +#define IIC_STS_IRQA 0x02 +#define IIC_STS_ERR 0x04 +#define IIC_STS_SCMP 0x08 +#define IIC_STS_MDBF 0x10 +#define IIC_STS_MDBS 0x20 +#define IIC_STS_SLPR 0x40 +#define IIC_STS_SSS 0x80 + +/* EXTSTS Register Bit definition */ +#define IIC_EXTSTS_XFRA 0x01 +#define IIC_EXTSTS_ICT 0x02 +#define IIC_EXTSTS_LA 0x04 + +/* XTCNTLSS Register Bit definition */ +#define IIC_XTCNTLSS_SRST 0x01 +#define IIC_XTCNTLSS_EPI 0x02 +#define IIC_XTCNTLSS_SDBF 0x04 +#define IIC_XTCNTLSS_SBDD 0x08 +#define IIC_XTCNTLSS_SWS 0x10 +#define IIC_XTCNTLSS_SWC 0x20 +#define IIC_XTCNTLSS_SRS 0x40 +#define IIC_XTCNTLSS_SRC 0x80 + +/* IICx_DIRECTCNTL register */ +#define IIC_DIRCNTL_SDAC 0x08 +#define IIC_DIRCNTL_SCC 0x04 +#define IIC_DIRCNTL_MSDA 0x02 +#define IIC_DIRCNTL_MSC 0x01 + +#define DIRCTNL_FREE(v) (((v) & 0x0f) == 0x0f) +#endif diff --git a/include/i2c.h b/include/i2c.h index a8f729afe0..54c6f9fbc6 100644 --- a/include/i2c.h +++ b/include/i2c.h @@ -46,6 +46,16 @@ */ #define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */ +#if defined(CONFIG_I2C_MULTI_BUS) +#define CFG_MAX_I2C_BUS 2 +#define I2C_GET_BUS() i2c_get_bus_num() +#define I2C_SET_BUS(a) i2c_set_bus_num(a) +#else +#define CFG_MAX_I2C_BUS 1 +#define I2C_GET_BUS() 0 +#define I2C_SET_BUS(a) +#endif + /* * Initialization, must be called once on start up, may be called * repeatedly to change the speed and slave addresses. From 36d830c9830379045f5daa9f542ac1c990c70068 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 10:35:42 +0100 Subject: [PATCH 16/30] [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files Since the existing 4xx SPD SDRAM initialization routines for the 405 SDRAM controller and the 440 DDR controller don't have much in common this patch splits both drivers into different files. This is in preparation for the 440 DDR2 controller support (440SP/e). Signed-off-by: Stefan Roese --- cpu/ppc4xx/40x_spd_sdram.c | 469 ++++++++++++++++++++++ cpu/ppc4xx/{spd_sdram.c => 44x_spd_ddr.c} | 419 +------------------ cpu/ppc4xx/Makefile | 3 +- 3 files changed, 478 insertions(+), 413 deletions(-) create mode 100644 cpu/ppc4xx/40x_spd_sdram.c rename cpu/ppc4xx/{spd_sdram.c => 44x_spd_ddr.c} (77%) diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c new file mode 100644 index 0000000000..19c4f764e3 --- /dev/null +++ b/cpu/ppc4xx/40x_spd_sdram.c @@ -0,0 +1,469 @@ +/* + * cpu/ppc4xx/40x_spd_sdram.c + * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a + * SDRAM controller. Those are all current 405 PPC's. + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com + * + * Based on code by: + * + * Kenneth Johansson ,Ericsson AB. + * kenneth.johansson@etx.ericsson.se + * + * hacked up by bill hunter. fixed so we could run before + * serial_init and console_init. previous version avoided this by + * running out of cache memory during serial/console init, then running + * this code later. + * + * (C) Copyright 2002 + * Jun Gu, Artesyn Technology, jung@artesyncp.com + * Support for AMCC 440 based on OpenBIOS draminit.c from IBM. + * + * (C) Copyright 2005 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include + +#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440) + +/* + * Set default values + */ +#ifndef CFG_I2C_SPEED +#define CFG_I2C_SPEED 50000 +#endif + +#ifndef CFG_I2C_SLAVE +#define CFG_I2C_SLAVE 0xFE +#endif + +#define ONE_BILLION 1000000000 + +#define SDRAM0_CFG_DCE 0x80000000 +#define SDRAM0_CFG_SRE 0x40000000 +#define SDRAM0_CFG_PME 0x20000000 +#define SDRAM0_CFG_MEMCHK 0x10000000 +#define SDRAM0_CFG_REGEN 0x08000000 +#define SDRAM0_CFG_ECCDD 0x00400000 +#define SDRAM0_CFG_EMDULR 0x00200000 +#define SDRAM0_CFG_DRW_SHIFT (31-6) +#define SDRAM0_CFG_BRPF_SHIFT (31-8) + +#define SDRAM0_TR_CASL_SHIFT (31-8) +#define SDRAM0_TR_PTA_SHIFT (31-13) +#define SDRAM0_TR_CTP_SHIFT (31-15) +#define SDRAM0_TR_LDF_SHIFT (31-17) +#define SDRAM0_TR_RFTA_SHIFT (31-29) +#define SDRAM0_TR_RCD_SHIFT (31-31) + +#define SDRAM0_RTR_SHIFT (31-15) +#define SDRAM0_ECCCFG_SHIFT (31-11) + +/* SDRAM0_CFG enable macro */ +#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT ) + +#define SDRAM0_BXCR_SZ_MASK 0x000e0000 +#define SDRAM0_BXCR_AM_MASK 0x0000e000 + +#define SDRAM0_BXCR_SZ_SHIFT (31-14) +#define SDRAM0_BXCR_AM_SHIFT (31-18) + +#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) ) +#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) ) + +#ifdef CONFIG_SPDDRAM_SILENT +# define SPD_ERR(x) do { return 0; } while (0) +#else +# define SPD_ERR(x) do { printf(x); return(0); } while (0) +#endif + +#define sdram_HZ_to_ns(hertz) (1000000000/(hertz)) + +/* function prototypes */ +int spd_read(uint addr); + + +/* + * This function is reading data from the DIMM module EEPROM over the SPD bus + * and uses that to program the sdram controller. + * + * This works on boards that has the same schematics that the AMCC walnut has. + * + * Input: null for default I2C spd functions or a pointer to a custom function + * returning spd_data. + */ + +long int spd_sdram(int(read_spd)(uint addr)) +{ + int tmp,row,col; + int total_size,bank_size,bank_code; + int ecc_on; + int mode; + int bank_cnt; + + int sdram0_pmit=0x07c00000; +#ifndef CONFIG_405EP /* not on PPC405EP */ + int sdram0_besr0=-1; + int sdram0_besr1=-1; + int sdram0_eccesr=-1; +#endif + int sdram0_ecccfg; + + int sdram0_rtr=0; + int sdram0_tr=0; + + int sdram0_b0cr; + int sdram0_b1cr; + int sdram0_b2cr; + int sdram0_b3cr; + + int sdram0_cfg=0; + + int t_rp; + int t_rcd; + int t_ras; + int t_rc; + int min_cas; + + PPC405_SYS_INFO sys_info; + unsigned long bus_period_x_10; + + /* + * get the board info + */ + get_sys_info(&sys_info); + bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10); + + if (read_spd == 0){ + read_spd=spd_read; + /* + * Make sure I2C controller is initialized + * before continuing. + */ + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + } + + /* Make shure we are using SDRAM */ + if (read_spd(2) != 0x04) { + SPD_ERR("SDRAM - non SDRAM memory module found\n"); + } + + /* ------------------------------------------------------------------ + * configure memory timing register + * + * data from DIMM: + * 27 IN Row Precharge Time ( t RP) + * 29 MIN RAS to CAS Delay ( t RCD) + * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS + * -------------------------------------------------------------------*/ + + /* + * first figure out which cas latency mode to use + * use the min supported mode + */ + + tmp = read_spd(127) & 0x6; + if (tmp == 0x02) { /* only cas = 2 supported */ + min_cas = 2; +/* t_ck = read_spd(9); */ +/* t_ac = read_spd(10); */ + } else if (tmp == 0x04) { /* only cas = 3 supported */ + min_cas = 3; +/* t_ck = read_spd(9); */ +/* t_ac = read_spd(10); */ + } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */ + min_cas = 2; +/* t_ck = read_spd(23); */ +/* t_ac = read_spd(24); */ + } else { + SPD_ERR("SDRAM - unsupported CAS latency \n"); + } + + /* get some timing values, t_rp,t_rcd,t_ras,t_rc + */ + t_rp = read_spd(27); + t_rcd = read_spd(29); + t_ras = read_spd(30); + t_rc = t_ras + t_rp; + + /* The following timing calcs subtract 1 before deviding. + * this has effect of using ceiling instead of floor rounding, + * and also subtracting 1 to convert number to reg value + */ + /* set up CASL */ + sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT; + /* set up PTA */ + sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT; + /* set up CTP */ + tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3; + if (tmp < 1) + tmp = 1; + sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT; + /* set LDF = 2 cycles, reg value = 1 */ + sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT; + /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */ + tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3; + if (tmp < 0) + tmp = 0; + if (tmp > 6) + tmp = 6; + sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT; + /* set RCD = t_rcd/bus_period*/ + sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ; + + + /*------------------------------------------------------------------ + * configure RTR register + * -------------------------------------------------------------------*/ + row = read_spd(3); + col = read_spd(4); + tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */ + switch (tmp) { + case 0x00: + tmp = 15625; + break; + case 0x01: + tmp = 15625 / 4; + break; + case 0x02: + tmp = 15625 / 2; + break; + case 0x03: + tmp = 15625 * 2; + break; + case 0x04: + tmp = 15625 * 4; + break; + case 0x05: + tmp = 15625 * 8; + break; + default: + SPD_ERR("SDRAM - Bad refresh period \n"); + } + /* convert from nsec to bus cycles */ + tmp = (tmp * 10) / bus_period_x_10; + sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT; + + /*------------------------------------------------------------------ + * determine the number of banks used + * -------------------------------------------------------------------*/ + /* byte 7:6 is module data width */ + if (read_spd(7) != 0) + SPD_ERR("SDRAM - unsupported module width\n"); + tmp = read_spd(6); + if (tmp < 32) + SPD_ERR("SDRAM - unsupported module width\n"); + else if (tmp < 64) + bank_cnt = 1; /* one bank per sdram side */ + else if (tmp < 73) + bank_cnt = 2; /* need two banks per side */ + else if (tmp < 161) + bank_cnt = 4; /* need four banks per side */ + else + SPD_ERR("SDRAM - unsupported module width\n"); + + /* byte 5 is the module row count (refered to as dimm "sides") */ + tmp = read_spd(5); + if (tmp == 1) + ; + else if (tmp==2) + bank_cnt *= 2; + else if (tmp==4) + bank_cnt *= 4; + else + bank_cnt = 8; /* 8 is an error code */ + + if (bank_cnt > 4) /* we only have 4 banks to work with */ + SPD_ERR("SDRAM - unsupported module rows for this width\n"); + + /* now check for ECC ability of module. We only support ECC + * on 32 bit wide devices with 8 bit ECC. + */ + if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) { + sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT; + ecc_on = 1; + } else { + sdram0_ecccfg = 0; + ecc_on = 0; + } + + /*------------------------------------------------------------------ + * calculate total size + * -------------------------------------------------------------------*/ + /* calculate total size and do sanity check */ + tmp = read_spd(31); + total_size = 1 << 22; /* total_size = 4MB */ + /* now multiply 4M by the smallest device row density */ + /* note that we don't support asymetric rows */ + while (((tmp & 0x0001) == 0) && (tmp != 0)) { + total_size = total_size << 1; + tmp = tmp >> 1; + } + total_size *= read_spd(5); /* mult by module rows (dimm sides) */ + + /*------------------------------------------------------------------ + * map rows * cols * banks to a mode + * -------------------------------------------------------------------*/ + + switch (row) { + case 11: + switch (col) { + case 8: + mode=4; /* mode 5 */ + break; + case 9: + case 10: + mode=0; /* mode 1 */ + break; + default: + SPD_ERR("SDRAM - unsupported mode\n"); + } + break; + case 12: + switch (col) { + case 8: + mode=3; /* mode 4 */ + break; + case 9: + case 10: + mode=1; /* mode 2 */ + break; + default: + SPD_ERR("SDRAM - unsupported mode\n"); + } + break; + case 13: + switch (col) { + case 8: + mode=5; /* mode 6 */ + break; + case 9: + case 10: + if (read_spd(17) == 2) + mode = 6; /* mode 7 */ + else + mode = 2; /* mode 3 */ + break; + case 11: + mode = 2; /* mode 3 */ + break; + default: + SPD_ERR("SDRAM - unsupported mode\n"); + } + break; + default: + SPD_ERR("SDRAM - unsupported mode\n"); + } + + /*------------------------------------------------------------------ + * using the calculated values, compute the bank + * config register values. + * -------------------------------------------------------------------*/ + sdram0_b1cr = 0; + sdram0_b2cr = 0; + sdram0_b3cr = 0; + + /* compute the size of each bank */ + bank_size = total_size / bank_cnt; + /* convert bank size to bank size code for ppc4xx + by takeing log2(bank_size) - 22 */ + tmp = bank_size; /* start with tmp = bank_size */ + bank_code = 0; /* and bank_code = 0 */ + while (tmp > 1) { /* this takes log2 of tmp */ + bank_code++; /* and stores result in bank_code */ + tmp = tmp >> 1; + } /* bank_code is now log2(bank_size) */ + bank_code -= 22; /* subtract 22 to get the code */ + + tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1; + sdram0_b0cr = (bank_size * 0) | tmp; +#ifndef CONFIG_405EP /* not on PPC405EP */ + if (bank_cnt > 1) + sdram0_b2cr = (bank_size * 1) | tmp; + if (bank_cnt > 2) + sdram0_b1cr = (bank_size * 2) | tmp; + if (bank_cnt > 3) + sdram0_b3cr = (bank_size * 3) | tmp; +#else + /* PPC405EP chip only supports two SDRAM banks */ + if (bank_cnt > 1) + sdram0_b1cr = (bank_size * 1) | tmp; + if (bank_cnt > 2) + total_size = 2 * bank_size; +#endif + + /* + * enable sdram controller DCE=1 + * enable burst read prefetch to 32 bytes BRPF=2 + * leave other functions off + */ + + /*------------------------------------------------------------------ + * now that we've done our calculations, we are ready to + * program all the registers. + * -------------------------------------------------------------------*/ + +#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) + /* disable memcontroller so updates work */ + mtsdram0( mem_mcopt1, 0 ); + +#ifndef CONFIG_405EP /* not on PPC405EP */ + mtsdram0( mem_besra , sdram0_besr0 ); + mtsdram0( mem_besrb , sdram0_besr1 ); + mtsdram0( mem_ecccf , sdram0_ecccfg ); + mtsdram0( mem_eccerr, sdram0_eccesr ); +#endif + mtsdram0( mem_rtr , sdram0_rtr ); + mtsdram0( mem_pmit , sdram0_pmit ); + mtsdram0( mem_mb0cf , sdram0_b0cr ); + mtsdram0( mem_mb1cf , sdram0_b1cr ); +#ifndef CONFIG_405EP /* not on PPC405EP */ + mtsdram0( mem_mb2cf , sdram0_b2cr ); + mtsdram0( mem_mb3cf , sdram0_b3cr ); +#endif + mtsdram0( mem_sdtr1 , sdram0_tr ); + + /* SDRAM have a power on delay, 500 micro should do */ + udelay(500); + sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR; + if (ecc_on) + sdram0_cfg |= SDRAM0_CFG_MEMCHK; + mtsdram0(mem_mcopt1, sdram0_cfg); + + return (total_size); +} + +int spd_read(uint addr) +{ + uchar data[2]; + + if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0) + return (int)data[0]; + else + return 0; +} + +#endif /* CONFIG_SPD_EEPROM */ diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/44x_spd_ddr.c similarity index 77% rename from cpu/ppc4xx/spd_sdram.c rename to cpu/ppc4xx/44x_spd_ddr.c index c24456bea8..32d44dbe56 100644 --- a/cpu/ppc4xx/spd_sdram.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -1,4 +1,8 @@ /* + * cpu/ppc4xx/44x_spd_ddr.c + * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a + * DDR controller. Those are 440GP/GX/EP/GR. + * * (C) Copyright 2001 * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com * @@ -43,7 +47,9 @@ #include #include -#ifdef CONFIG_SPD_EEPROM +#if defined(CONFIG_SPD_EEPROM) && \ + (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR)) /* * Set default values @@ -58,414 +64,6 @@ #define ONE_BILLION 1000000000 -#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */ - -#define SDRAM0_CFG_DCE 0x80000000 -#define SDRAM0_CFG_SRE 0x40000000 -#define SDRAM0_CFG_PME 0x20000000 -#define SDRAM0_CFG_MEMCHK 0x10000000 -#define SDRAM0_CFG_REGEN 0x08000000 -#define SDRAM0_CFG_ECCDD 0x00400000 -#define SDRAM0_CFG_EMDULR 0x00200000 -#define SDRAM0_CFG_DRW_SHIFT (31-6) -#define SDRAM0_CFG_BRPF_SHIFT (31-8) - -#define SDRAM0_TR_CASL_SHIFT (31-8) -#define SDRAM0_TR_PTA_SHIFT (31-13) -#define SDRAM0_TR_CTP_SHIFT (31-15) -#define SDRAM0_TR_LDF_SHIFT (31-17) -#define SDRAM0_TR_RFTA_SHIFT (31-29) -#define SDRAM0_TR_RCD_SHIFT (31-31) - -#define SDRAM0_RTR_SHIFT (31-15) -#define SDRAM0_ECCCFG_SHIFT (31-11) - -/* SDRAM0_CFG enable macro */ -#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT ) - -#define SDRAM0_BXCR_SZ_MASK 0x000e0000 -#define SDRAM0_BXCR_AM_MASK 0x0000e000 - -#define SDRAM0_BXCR_SZ_SHIFT (31-14) -#define SDRAM0_BXCR_AM_SHIFT (31-18) - -#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) ) -#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) ) - -#ifdef CONFIG_SPDDRAM_SILENT -# define SPD_ERR(x) do { return 0; } while (0) -#else -# define SPD_ERR(x) do { printf(x); return(0); } while (0) -#endif - -#define sdram_HZ_to_ns(hertz) (1000000000/(hertz)) - -/* function prototypes */ -int spd_read(uint addr); - - -/* - * This function is reading data from the DIMM module EEPROM over the SPD bus - * and uses that to program the sdram controller. - * - * This works on boards that has the same schematics that the AMCC walnut has. - * - * Input: null for default I2C spd functions or a pointer to a custom function - * returning spd_data. - */ - -long int spd_sdram(int(read_spd)(uint addr)) -{ - int tmp,row,col; - int total_size,bank_size,bank_code; - int ecc_on; - int mode; - int bank_cnt; - - int sdram0_pmit=0x07c00000; -#ifndef CONFIG_405EP /* not on PPC405EP */ - int sdram0_besr0=-1; - int sdram0_besr1=-1; - int sdram0_eccesr=-1; -#endif - int sdram0_ecccfg; - - int sdram0_rtr=0; - int sdram0_tr=0; - - int sdram0_b0cr; - int sdram0_b1cr; - int sdram0_b2cr; - int sdram0_b3cr; - - int sdram0_cfg=0; - - int t_rp; - int t_rcd; - int t_ras; - int t_rc; - int min_cas; - - PPC405_SYS_INFO sys_info; - unsigned long bus_period_x_10; - - /* - * get the board info - */ - get_sys_info(&sys_info); - bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10); - - if (read_spd == 0){ - read_spd=spd_read; - /* - * Make sure I2C controller is initialized - * before continuing. - */ - i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); - } - - /* Make shure we are using SDRAM */ - if (read_spd(2) != 0x04) { - SPD_ERR("SDRAM - non SDRAM memory module found\n"); - } - - /* ------------------------------------------------------------------ - * configure memory timing register - * - * data from DIMM: - * 27 IN Row Precharge Time ( t RP) - * 29 MIN RAS to CAS Delay ( t RCD) - * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS - * -------------------------------------------------------------------*/ - - /* - * first figure out which cas latency mode to use - * use the min supported mode - */ - - tmp = read_spd(127) & 0x6; - if (tmp == 0x02) { /* only cas = 2 supported */ - min_cas = 2; -/* t_ck = read_spd(9); */ -/* t_ac = read_spd(10); */ - } else if (tmp == 0x04) { /* only cas = 3 supported */ - min_cas = 3; -/* t_ck = read_spd(9); */ -/* t_ac = read_spd(10); */ - } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */ - min_cas = 2; -/* t_ck = read_spd(23); */ -/* t_ac = read_spd(24); */ - } else { - SPD_ERR("SDRAM - unsupported CAS latency \n"); - } - - /* get some timing values, t_rp,t_rcd,t_ras,t_rc - */ - t_rp = read_spd(27); - t_rcd = read_spd(29); - t_ras = read_spd(30); - t_rc = t_ras + t_rp; - - /* The following timing calcs subtract 1 before deviding. - * this has effect of using ceiling instead of floor rounding, - * and also subtracting 1 to convert number to reg value - */ - /* set up CASL */ - sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT; - /* set up PTA */ - sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT; - /* set up CTP */ - tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3; - if (tmp < 1) - tmp = 1; - sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT; - /* set LDF = 2 cycles, reg value = 1 */ - sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT; - /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */ - tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3; - if (tmp < 0) - tmp = 0; - if (tmp > 6) - tmp = 6; - sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT; - /* set RCD = t_rcd/bus_period*/ - sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ; - - - /*------------------------------------------------------------------ - * configure RTR register - * -------------------------------------------------------------------*/ - row = read_spd(3); - col = read_spd(4); - tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */ - switch (tmp) { - case 0x00: - tmp = 15625; - break; - case 0x01: - tmp = 15625 / 4; - break; - case 0x02: - tmp = 15625 / 2; - break; - case 0x03: - tmp = 15625 * 2; - break; - case 0x04: - tmp = 15625 * 4; - break; - case 0x05: - tmp = 15625 * 8; - break; - default: - SPD_ERR("SDRAM - Bad refresh period \n"); - } - /* convert from nsec to bus cycles */ - tmp = (tmp * 10) / bus_period_x_10; - sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT; - - /*------------------------------------------------------------------ - * determine the number of banks used - * -------------------------------------------------------------------*/ - /* byte 7:6 is module data width */ - if (read_spd(7) != 0) - SPD_ERR("SDRAM - unsupported module width\n"); - tmp = read_spd(6); - if (tmp < 32) - SPD_ERR("SDRAM - unsupported module width\n"); - else if (tmp < 64) - bank_cnt = 1; /* one bank per sdram side */ - else if (tmp < 73) - bank_cnt = 2; /* need two banks per side */ - else if (tmp < 161) - bank_cnt = 4; /* need four banks per side */ - else - SPD_ERR("SDRAM - unsupported module width\n"); - - /* byte 5 is the module row count (refered to as dimm "sides") */ - tmp = read_spd(5); - if (tmp == 1) - ; - else if (tmp==2) - bank_cnt *= 2; - else if (tmp==4) - bank_cnt *= 4; - else - bank_cnt = 8; /* 8 is an error code */ - - if (bank_cnt > 4) /* we only have 4 banks to work with */ - SPD_ERR("SDRAM - unsupported module rows for this width\n"); - - /* now check for ECC ability of module. We only support ECC - * on 32 bit wide devices with 8 bit ECC. - */ - if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) { - sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT; - ecc_on = 1; - } else { - sdram0_ecccfg = 0; - ecc_on = 0; - } - - /*------------------------------------------------------------------ - * calculate total size - * -------------------------------------------------------------------*/ - /* calculate total size and do sanity check */ - tmp = read_spd(31); - total_size = 1 << 22; /* total_size = 4MB */ - /* now multiply 4M by the smallest device row density */ - /* note that we don't support asymetric rows */ - while (((tmp & 0x0001) == 0) && (tmp != 0)) { - total_size = total_size << 1; - tmp = tmp >> 1; - } - total_size *= read_spd(5); /* mult by module rows (dimm sides) */ - - /*------------------------------------------------------------------ - * map rows * cols * banks to a mode - * -------------------------------------------------------------------*/ - - switch (row) { - case 11: - switch (col) { - case 8: - mode=4; /* mode 5 */ - break; - case 9: - case 10: - mode=0; /* mode 1 */ - break; - default: - SPD_ERR("SDRAM - unsupported mode\n"); - } - break; - case 12: - switch (col) { - case 8: - mode=3; /* mode 4 */ - break; - case 9: - case 10: - mode=1; /* mode 2 */ - break; - default: - SPD_ERR("SDRAM - unsupported mode\n"); - } - break; - case 13: - switch (col) { - case 8: - mode=5; /* mode 6 */ - break; - case 9: - case 10: - if (read_spd(17) == 2) - mode = 6; /* mode 7 */ - else - mode = 2; /* mode 3 */ - break; - case 11: - mode = 2; /* mode 3 */ - break; - default: - SPD_ERR("SDRAM - unsupported mode\n"); - } - break; - default: - SPD_ERR("SDRAM - unsupported mode\n"); - } - - /*------------------------------------------------------------------ - * using the calculated values, compute the bank - * config register values. - * -------------------------------------------------------------------*/ - sdram0_b1cr = 0; - sdram0_b2cr = 0; - sdram0_b3cr = 0; - - /* compute the size of each bank */ - bank_size = total_size / bank_cnt; - /* convert bank size to bank size code for ppc4xx - by takeing log2(bank_size) - 22 */ - tmp = bank_size; /* start with tmp = bank_size */ - bank_code = 0; /* and bank_code = 0 */ - while (tmp > 1) { /* this takes log2 of tmp */ - bank_code++; /* and stores result in bank_code */ - tmp = tmp >> 1; - } /* bank_code is now log2(bank_size) */ - bank_code -= 22; /* subtract 22 to get the code */ - - tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1; - sdram0_b0cr = (bank_size * 0) | tmp; -#ifndef CONFIG_405EP /* not on PPC405EP */ - if (bank_cnt > 1) - sdram0_b2cr = (bank_size * 1) | tmp; - if (bank_cnt > 2) - sdram0_b1cr = (bank_size * 2) | tmp; - if (bank_cnt > 3) - sdram0_b3cr = (bank_size * 3) | tmp; -#else - /* PPC405EP chip only supports two SDRAM banks */ - if (bank_cnt > 1) - sdram0_b1cr = (bank_size * 1) | tmp; - if (bank_cnt > 2) - total_size = 2 * bank_size; -#endif - - /* - * enable sdram controller DCE=1 - * enable burst read prefetch to 32 bytes BRPF=2 - * leave other functions off - */ - - /*------------------------------------------------------------------ - * now that we've done our calculations, we are ready to - * program all the registers. - * -------------------------------------------------------------------*/ - -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) - /* disable memcontroller so updates work */ - mtsdram0( mem_mcopt1, 0 ); - -#ifndef CONFIG_405EP /* not on PPC405EP */ - mtsdram0( mem_besra , sdram0_besr0 ); - mtsdram0( mem_besrb , sdram0_besr1 ); - mtsdram0( mem_ecccf , sdram0_ecccfg ); - mtsdram0( mem_eccerr, sdram0_eccesr ); -#endif - mtsdram0( mem_rtr , sdram0_rtr ); - mtsdram0( mem_pmit , sdram0_pmit ); - mtsdram0( mem_mb0cf , sdram0_b0cr ); - mtsdram0( mem_mb1cf , sdram0_b1cr ); -#ifndef CONFIG_405EP /* not on PPC405EP */ - mtsdram0( mem_mb2cf , sdram0_b2cr ); - mtsdram0( mem_mb3cf , sdram0_b3cr ); -#endif - mtsdram0( mem_sdtr1 , sdram0_tr ); - - /* SDRAM have a power on delay, 500 micro should do */ - udelay(500); - sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR; - if (ecc_on) - sdram0_cfg |= SDRAM0_CFG_MEMCHK; - mtsdram0(mem_mcopt1, sdram0_cfg); - - return (total_size); -} - -int spd_read(uint addr) -{ - uchar data[2]; - - if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0) - return (int)data[0]; - else - return 0; -} - -#else /* CONFIG_440 */ - /*----------------------------------------------------------------------------- | Memory Controller Options 0 +-----------------------------------------------------------------------------*/ @@ -1825,7 +1423,4 @@ void program_ecc (unsigned long num_bytes) SDRAM_CFG0_MCHK_CHK); } } - -#endif /* CONFIG_440 */ - #endif /* CONFIG_SPD_EEPROM */ diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile index baecf70352..96f0f62eb6 100644 --- a/cpu/ppc4xx/Makefile +++ b/cpu/ppc4xx/Makefile @@ -31,7 +31,8 @@ COBJS = 405gp_pci.o 4xx_enet.o \ bedbug_405.o commproc.o \ cpu.o cpu_init.o i2c.o interrupts.o \ miiphy.o ndfc.o sdram.o serial.o \ - spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o \ + 40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \ + tlb.o traps.o usb_ohci.o usbdev.o \ 440spe_pcie.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) From 4037ed3b63923cfcec27f784a89057c3cbabcedb Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 10:43:34 +0100 Subject: [PATCH 17/30] [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support This patch adds support for the DDR2 controller used on the 440SP and 440SPe. It is tested on the Katmai (440SPe) eval board and works fine with the following DIMM modules: - Corsair CM2X512-5400C4 (512MByte per DIMM) - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) This patch also adds the nice functionality to dynamically create the TLB entries for the SDRAM (tlb.c). So we should never run into such problems with wrong (too short) TLB initialization again on these platforms. Signed-off-by: Stefan Roese --- cpu/ppc4xx/44x_spd_ddr2.c | 2759 +++++++++++++++++++++++++++++++++++++ cpu/ppc4xx/tlb.c | 184 +++ include/asm-ppc/mmu.h | 208 ++- 3 files changed, 3109 insertions(+), 42 deletions(-) create mode 100644 cpu/ppc4xx/44x_spd_ddr2.c create mode 100644 cpu/ppc4xx/tlb.c diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c new file mode 100644 index 0000000000..6cff3a2e1a --- /dev/null +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -0,0 +1,2759 @@ +/* + * cpu/ppc4xx/44x_spd_ddr2.c + * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a + * DDR2 controller (non Denali Core). Those are 440SP/SPe. + * + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * COPYRIGHT AMCC CORPORATION 2004 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* define DEBUG for debugging output (obviously ;-)) */ +#if 0 +#define DEBUG +#endif + +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_SPD_EEPROM) && \ + (defined(CONFIG_440SP) || defined(CONFIG_440SPE)) + +#ifndef TRUE +#define TRUE 1 +#endif +#ifndef FALSE +#define FALSE 0 +#endif + +#define SDRAM_DDR1 1 +#define SDRAM_DDR2 2 +#define SDRAM_NONE 0 + +#define MAXDIMMS 2 +#define MAXRANKS 4 +#define MAXBXCF 4 +#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ + +#define ONE_BILLION 1000000000 + +#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d)) + +#if defined(DEBUG) +static void ppc440sp_sdram_register_dump(void); +#endif + +/*-----------------------------------------------------------------------------+ + * Defines + *-----------------------------------------------------------------------------*/ +/* Defines for the Read Cycle Delay test */ +#define NUMMEMTESTS 8 +#define NUMMEMWORDS 8 + +/* Private Structure Definitions */ + +/* enum only to ease code for cas latency setting */ +typedef enum ddr_cas_id { + DDR_CAS_2 = 20, + DDR_CAS_2_5 = 25, + DDR_CAS_3 = 30, + DDR_CAS_4 = 40, + DDR_CAS_5 = 50 +} ddr_cas_id_t; + +/*-----------------------------------------------------------------------------+ + * Prototypes + *-----------------------------------------------------------------------------*/ +static unsigned long sdram_memsize(void); +void program_tlb(u32 start, u32 size); +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_frequency(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_rank_number(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void check_voltage_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_memory_queue(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_codt(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_mode(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks, + ddr_cas_id_t *selected_cas); +static void program_tr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_bxcf(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_copt1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_initplr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks, + ddr_cas_id_t selected_cas); +static unsigned long is_ecc_enabled(void); +static void program_ecc(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); +static void program_ecc_addr(unsigned long start_address, + unsigned long num_bytes); + +#ifdef HARD_CODED_DQS /* calibration test with hardvalues */ +static void test(void); +#else +static void DQS_calibration_process(void); +#endif +static void program_DQS_calibration(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks); + +static u32 mfdcr_any(u32 dcr) +{ + u32 val; + + switch (dcr) { + case SDRAM_R0BAS + 0: + val = mfdcr(SDRAM_R0BAS + 0); + break; + case SDRAM_R0BAS + 1: + val = mfdcr(SDRAM_R0BAS + 1); + break; + case SDRAM_R0BAS + 2: + val = mfdcr(SDRAM_R0BAS + 2); + break; + case SDRAM_R0BAS + 3: + val = mfdcr(SDRAM_R0BAS + 3); + break; + default: + printf("DCR %d not defined in case statement!!!\n", dcr); + val = 0; /* just to satisfy the compiler */ + } + + return val; +} + +static void mtdcr_any(u32 dcr, u32 val) +{ + switch (dcr) { + case SDRAM_R0BAS + 0: + mtdcr(SDRAM_R0BAS + 0, val); + break; + case SDRAM_R0BAS + 1: + mtdcr(SDRAM_R0BAS + 1, val); + break; + case SDRAM_R0BAS + 2: + mtdcr(SDRAM_R0BAS + 2, val); + break; + case SDRAM_R0BAS + 3: + mtdcr(SDRAM_R0BAS + 3, val); + break; + default: + printf("DCR %d not defined in case statement!!!\n", dcr); + } +} + +static void wait_ddr_idle(void) +{ + u32 val; + + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT); +} + +static unsigned char spd_read(uchar chip, uint addr) +{ + unsigned char data[2]; + + if (i2c_probe(chip) == 0) + if (i2c_read(chip, addr, 1, data, 1) == 0) + return data[0]; + + return 0; +} + +/*-----------------------------------------------------------------------------+ + * sdram_memsize + *-----------------------------------------------------------------------------*/ +static unsigned long sdram_memsize(void) +{ + unsigned long mem_size; + unsigned long mcopt2; + unsigned long mcstat; + unsigned long mb0cf; + unsigned long sdsz; + unsigned long i; + + mem_size = 0; + + mfsdram(SDRAM_MCOPT2, mcopt2); + mfsdram(SDRAM_MCSTAT, mcstat); + + /* DDR controller must be enabled and not in self-refresh. */ + /* Otherwise memsize is zero. */ + if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE) + && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT) + && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK)) + == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) { + for (i = 0; i < 4; i++) { + mfsdram(SDRAM_MB0CF + (i << 2), mb0cf); + /* Banks enabled */ + if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { + sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK; + + switch(sdsz) { + case SDRAM_RXBAS_SDSZ_8: + mem_size+=8; + break; + case SDRAM_RXBAS_SDSZ_16: + mem_size+=16; + break; + case SDRAM_RXBAS_SDSZ_32: + mem_size+=32; + break; + case SDRAM_RXBAS_SDSZ_64: + mem_size+=64; + break; + case SDRAM_RXBAS_SDSZ_128: + mem_size+=128; + break; + case SDRAM_RXBAS_SDSZ_256: + mem_size+=256; + break; + case SDRAM_RXBAS_SDSZ_512: + mem_size+=512; + break; + case SDRAM_RXBAS_SDSZ_1024: + mem_size+=1024; + break; + case SDRAM_RXBAS_SDSZ_2048: + mem_size+=2048; + break; + case SDRAM_RXBAS_SDSZ_4096: + mem_size+=4096; + break; + default: + mem_size=0; + break; + } + } + } + } + + mem_size *= 1024 * 1024; + return(mem_size); +} + +/*-----------------------------------------------------------------------------+ + * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller. + * Note: This routine runs from flash with a stack set up in the chip's + * sram space. It is important that the routine does not require .sbss, .bss or + * .data sections. It also cannot call routines that require these sections. + *-----------------------------------------------------------------------------*/ +/*----------------------------------------------------------------------------- + * Function: initdram + * Description: Configures SDRAM memory banks for DDR operation. + * Auto Memory Configuration option reads the DDR SDRAM EEPROMs + * via the IIC bus and then configures the DDR SDRAM memory + * banks appropriately. If Auto Memory Configuration is + * not used, it is assumed that no DIMM is plugged + *-----------------------------------------------------------------------------*/ +long int initdram(int board_type) +{ + unsigned char spd0[MAX_SPD_BYTES]; + unsigned char spd1[MAX_SPD_BYTES]; + unsigned char *dimm_spd[MAXDIMMS]; + unsigned long dimm_populated[MAXDIMMS]; + unsigned char iic0_dimm_addr[MAXDIMMS]; + unsigned long num_dimm_banks; /* on board dimm banks */ + unsigned long val; + ddr_cas_id_t selected_cas; + unsigned long dram_size = 0; + + num_dimm_banks = sizeof(iic0_dimm_addr); + + /*------------------------------------------------------------------ + * Set up an array of SPD matrixes. + *-----------------------------------------------------------------*/ + dimm_spd[0] = spd0; + dimm_spd[1] = spd1; + + /*------------------------------------------------------------------ + * Set up an array of iic0 dimm addresses. + *-----------------------------------------------------------------*/ + iic0_dimm_addr[0] = IIC0_DIMM0_ADDR; + iic0_dimm_addr[1] = IIC0_DIMM1_ADDR; + + /*------------------------------------------------------------------ + * Reset the DDR-SDRAM controller. + *-----------------------------------------------------------------*/ + mtsdr(SDR0_SRST, 0x00200000); + mtsdr(SDR0_SRST, 0x00000000); + + /* + * Make sure I2C controller is initialized + * before continuing. + */ + + /* switch to correct I2C bus */ + I2C_SET_BUS(CFG_SPD_BUS_NUM); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + /*------------------------------------------------------------------ + * Clear out the serial presence detect buffers. + * Perform IIC reads from the dimm. Fill in the spds. + * Check to see if the dimm slots are populated + *-----------------------------------------------------------------*/ + get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Check the memory type for the dimms plugged. + *-----------------------------------------------------------------*/ + check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Check the frequency supported for the dimms plugged. + *-----------------------------------------------------------------*/ + check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Check the total rank number. + *-----------------------------------------------------------------*/ + check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Check the voltage type for the dimms plugged. + *-----------------------------------------------------------------*/ + check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Program SDRAM controller options 2 register + * Except Enabling of the memory controller. + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MCOPT2, val); + mtsdram(SDRAM_MCOPT2, + (val & + ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK | + SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK | + SDRAM_MCOPT2_ISIE_MASK)) + | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE | + SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW | + SDRAM_MCOPT2_ISIE_ENABLE)); + + /*------------------------------------------------------------------ + * Program SDRAM controller options 1 register + * Note: Does not enable the memory controller. + *-----------------------------------------------------------------*/ + program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Set the SDRAM Controller On Die Termination Register + *-----------------------------------------------------------------*/ + program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Program SDRAM refresh register. + *-----------------------------------------------------------------*/ + program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Program SDRAM mode register. + *-----------------------------------------------------------------*/ + program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks, &selected_cas); + + /*------------------------------------------------------------------ + * Set the SDRAM Write Data/DM/DQS Clock Timing Reg + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_WRDTR, val); + mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) | + (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV)); + + /*------------------------------------------------------------------ + * Set the SDRAM Clock Timing Register + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_CLKTR, val); + mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG); + + /*------------------------------------------------------------------ + * Program the BxCF registers. + *-----------------------------------------------------------------*/ + program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Program SDRAM timing registers. + *-----------------------------------------------------------------*/ + program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Set the Extended Mode register + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MEMODE, val); + mtsdram(SDRAM_MEMODE, + (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK | + SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) | + (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE + | SDRAM_MEMODE_RTT_75OHM | SDRAM_MEMODE_DQS_ENABLE)); + + /*------------------------------------------------------------------ + * Program Initialization preload registers. + *-----------------------------------------------------------------*/ + program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks, + selected_cas); + + /*------------------------------------------------------------------ + * Delay to ensure 200usec have elapsed since reset. + *-----------------------------------------------------------------*/ + udelay(400); + + /*------------------------------------------------------------------ + * Set the memory queue core base addr. + *-----------------------------------------------------------------*/ + program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks); + + /*------------------------------------------------------------------ + * Program SDRAM controller options 2 register + * Enable the memory controller. + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MCOPT2, val); + mtsdram(SDRAM_MCOPT2, + (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK | + SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) | + (SDRAM_MCOPT2_DCEN_ENABLE | SDRAM_MCOPT2_IPTR_EXECUTE)); + + /*------------------------------------------------------------------ + * Wait for SDRAM_CFG0_DC_EN to complete. + *-----------------------------------------------------------------*/ + do { + mfsdram(SDRAM_MCSTAT, val); + } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP); + + /* get installed memory size */ + dram_size = sdram_memsize(); + + /* and program tlb entries for this size (dynamic) */ + program_tlb(0, dram_size); + +#if 1 /* TODO: ECC support will come later */ + /*------------------------------------------------------------------ + * If ecc is enabled, initialize the parity bits. + *-----------------------------------------------------------------*/ + program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks); +#endif + + /*------------------------------------------------------------------ + * DQS calibration. + *-----------------------------------------------------------------*/ + program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks); + +#ifdef DEBUG + ppc440sp_sdram_register_dump(); +#endif + + return dram_size; +} + +static void get_spd_info(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long dimm_found; + unsigned char num_of_bytes; + unsigned char total_size; + + dimm_found = FALSE; + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + num_of_bytes = 0; + total_size = 0; + + num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0); + debug("\nspd_read(0x%x) returned %d\n", + iic0_dimm_addr[dimm_num], num_of_bytes); + total_size = spd_read(iic0_dimm_addr[dimm_num], 1); + debug("spd_read(0x%x) returned %d\n", + iic0_dimm_addr[dimm_num], total_size); + + if ((num_of_bytes != 0) && (total_size != 0)) { + dimm_populated[dimm_num] = TRUE; + dimm_found = TRUE; + debug("DIMM slot %lu: populated\n", dimm_num); + } else { + dimm_populated[dimm_num] = FALSE; + debug("DIMM slot %lu: Not populated\n", dimm_num); + } + } + + if (dimm_found == FALSE) { + printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); + hang(); + } +} + +#ifdef CONFIG_ADD_RAM_INFO +void board_add_ram_info(int use_default) +{ + if (is_ecc_enabled()) + puts(" (ECC enabled)"); + else + puts(" (ECC not enabled)"); +} +#endif + +/*------------------------------------------------------------------ + * For the memory DIMMs installed, this routine verifies that they + * really are DDR specific DIMMs. + *-----------------------------------------------------------------*/ +static void check_mem_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long dimm_type; + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] == TRUE) { + dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2); + switch (dimm_type) { + case 1: + printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in " + "slot %d.\n", (unsigned int)dimm_num); + printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + case 2: + printf("ERROR: EDO DIMM detected in slot %d.\n", + (unsigned int)dimm_num); + printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + case 3: + printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", + (unsigned int)dimm_num); + printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + case 4: + printf("ERROR: SDRAM DIMM detected in slot %d.\n", + (unsigned int)dimm_num); + printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + case 5: + printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", + (unsigned int)dimm_num); + printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + case 6: + printf("ERROR: SGRAM DIMM detected in slot %d.\n", + (unsigned int)dimm_num); + printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + case 7: + debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num); + dimm_populated[dimm_num] = SDRAM_DDR1; + break; + case 8: + debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num); + dimm_populated[dimm_num] = SDRAM_DDR2; + break; + default: + printf("ERROR: Unknown DIMM detected in slot %d.\n", + (unsigned int)dimm_num); + printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + } + } + } + for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) { + if ((dimm_populated[dimm_num-1] != SDRAM_NONE) + && (dimm_populated[dimm_num] != SDRAM_NONE) + && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { + printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); + hang(); + } + } +} + +/*------------------------------------------------------------------ + * For the memory DIMMs installed, this routine verifies that + * frequency previously calculated is supported. + *-----------------------------------------------------------------*/ +static void check_frequency(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long tcyc_reg; + unsigned long cycle_time; + unsigned long calc_cycle_time; + unsigned long sdram_freq; + unsigned long sdr_ddrpll; + PPC440_SYS_INFO board_cfg; + + /*------------------------------------------------------------------ + * Get the board configuration info. + *-----------------------------------------------------------------*/ + get_sys_info(&board_cfg); + + mfsdr(sdr_ddr0, sdr_ddrpll); + sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); + + /* + * calc_cycle_time is calculated from DDR frequency set by board/chip + * and is expressed in multiple of 10 picoseconds + * to match the way DIMM cycle time is calculated below. + */ + calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq); + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9); + /* + * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles: + * the higher order nibble (bits 4-7) designates the cycle time + * to a granularity of 1ns; + * the value presented by the lower order nibble (bits 0-3) + * has a granularity of .1ns and is added to the value designated + * by the higher nibble. In addition, four lines of the lower order + * nibble are assigned to support +.25,+.33, +.66 and +.75. + */ + /* Convert from hex to decimal */ + if ((tcyc_reg & 0x0F) == 0x0D) + cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75; + else if ((tcyc_reg & 0x0F) == 0x0C) + cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66; + else if ((tcyc_reg & 0x0F) == 0x0B) + cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33; + else if ((tcyc_reg & 0x0F) == 0x0A) + cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25; + else + cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + + ((tcyc_reg & 0x0F)*10); + + if (cycle_time > (calc_cycle_time + 10)) { + /* + * the provided sdram cycle_time is too small + * for the available DIMM cycle_time. + * The additionnal 100ps is here to accept a small incertainty. + */ + printf("ERROR: DRAM DIMM detected with cycle_time %d ps in " + "slot %d \n while calculated cycle time is %d ps.\n", + (unsigned int)(cycle_time*10), + (unsigned int)dimm_num, + (unsigned int)(calc_cycle_time*10)); + printf("Replace the DIMM, or change DDR frequency via " + "strapping bits.\n\n"); + hang(); + } + } + } +} + +/*------------------------------------------------------------------ + * For the memory DIMMs installed, this routine verifies two + * ranks/banks maximum are availables. + *-----------------------------------------------------------------*/ +static void check_rank_number(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long dimm_rank; + unsigned long total_rank = 0; + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5); + if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) + dimm_rank = (dimm_rank & 0x0F) +1; + else + dimm_rank = dimm_rank & 0x0F; + + + if (dimm_rank > MAXRANKS) { + printf("ERROR: DRAM DIMM detected with %d ranks in " + "slot %d is not supported.\n", dimm_rank, dimm_num); + printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + } else + total_rank += dimm_rank; + } + if (total_rank > MAXRANKS) { + printf("ERROR: DRAM DIMM detected with a total of %d ranks " + "for all slots.\n", (unsigned int)total_rank); + printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); + printf("Remove one of the DIMM modules.\n\n"); + hang(); + } + } +} + +/*------------------------------------------------------------------ + * only support 2.5V modules. + * This routine verifies this. + *-----------------------------------------------------------------*/ +static void check_voltage_type(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long voltage_type; + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8); + switch (voltage_type) { + case 0x00: + printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); + printf("This DIMM is 5.0 Volt/TTL.\n"); + printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", + (unsigned int)dimm_num); + hang(); + break; + case 0x01: + printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); + printf("This DIMM is LVTTL.\n"); + printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", + (unsigned int)dimm_num); + hang(); + break; + case 0x02: + printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); + printf("This DIMM is 1.5 Volt.\n"); + printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", + (unsigned int)dimm_num); + hang(); + break; + case 0x03: + printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); + printf("This DIMM is 3.3 Volt/TTL.\n"); + printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", + (unsigned int)dimm_num); + hang(); + break; + case 0x04: + /* 2.5 Voltage only for DDR1 */ + break; + case 0x05: + /* 1.8 Voltage only for DDR2 */ + break; + default: + printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); + printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", + (unsigned int)dimm_num); + hang(); + break; + } + } + } +} + +/*-----------------------------------------------------------------------------+ + * program_copt1. + *-----------------------------------------------------------------------------*/ +static void program_copt1(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long mcopt1; + unsigned long ecc_enabled; + unsigned long ecc = 0; + unsigned long data_width = 0; + unsigned long dimm_32bit; + unsigned long dimm_64bit; + unsigned long registered = 0; + unsigned long attribute = 0; + unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */ + unsigned long bankcount; + unsigned long ddrtype; + unsigned long val; + + ecc_enabled = TRUE; + dimm_32bit = FALSE; + dimm_64bit = FALSE; + buf0 = FALSE; + buf1 = FALSE; + + /*------------------------------------------------------------------ + * Set memory controller options reg 1, SDRAM_MCOPT1. + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MCOPT1, val); + mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK | + SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK | + SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK | + SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK | + SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK | + SDRAM_MCOPT1_DREF_MASK); + + mcopt1 |= SDRAM_MCOPT1_QDEP; + mcopt1 |= SDRAM_MCOPT1_PMU_OPEN; + mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED; + mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED; + mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED; + mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL; + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + /* test ecc support */ + ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11); + if (ecc != 0x02) /* ecc not supported */ + ecc_enabled = FALSE; + + /* test bank count */ + bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17); + if (bankcount == 0x04) /* bank count = 4 */ + mcopt1 |= SDRAM_MCOPT1_4_BANKS; + else /* bank count = 8 */ + mcopt1 |= SDRAM_MCOPT1_8_BANKS; + + /* test DDR type */ + ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2); + /* test for buffered/unbuffered, registered, differential clocks */ + registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20); + attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21); + + /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */ + if (dimm_num == 0) { + if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */ + mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE; + if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */ + mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE; + if (registered == 1) { /* DDR2 always buffered */ + /* TODO: what about above comments ? */ + mcopt1 |= SDRAM_MCOPT1_RDEN; + buf0 = TRUE; + } else { + /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */ + if ((attribute & 0x02) == 0x00) { + /* buffered not supported */ + buf0 = FALSE; + } else { + mcopt1 |= SDRAM_MCOPT1_RDEN; + buf0 = TRUE; + } + } + } + else if (dimm_num == 1) { + if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */ + mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE; + if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */ + mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE; + if (registered == 1) { + /* DDR2 always buffered */ + mcopt1 |= SDRAM_MCOPT1_RDEN; + buf1 = TRUE; + } else { + if ((attribute & 0x02) == 0x00) { + /* buffered not supported */ + buf1 = FALSE; + } else { + mcopt1 |= SDRAM_MCOPT1_RDEN; + buf1 = TRUE; + } + } + } + + /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */ + data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) + + (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8); + + switch (data_width) { + case 72: + case 64: + dimm_64bit = TRUE; + break; + case 40: + case 32: + dimm_32bit = TRUE; + break; + default: + printf("WARNING: Detected a DIMM with a data width of %d bits.\n", + data_width); + printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n"); + break; + } + } + } + + /* verify matching properties */ + if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { + if (buf0 != buf1) { + printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); + hang(); + } + } + + if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { + printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); + hang(); + } + else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { + mcopt1 |= SDRAM_MCOPT1_DMWD_64; + } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) { + mcopt1 |= SDRAM_MCOPT1_DMWD_32; + } else { + printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); + hang(); + } + + if (ecc_enabled == TRUE) + mcopt1 |= SDRAM_MCOPT1_MCHK_GEN; + else + mcopt1 |= SDRAM_MCOPT1_MCHK_NON; + + mtsdram(SDRAM_MCOPT1, mcopt1); +} + +/*-----------------------------------------------------------------------------+ + * program_codt. + *-----------------------------------------------------------------------------*/ +static void program_codt(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long codt; + unsigned long modt0 = 0; + unsigned long modt1 = 0; + unsigned long modt2 = 0; + unsigned long modt3 = 0; + unsigned char dimm_num; + unsigned char dimm_rank; + unsigned char total_rank = 0; + unsigned char total_dimm = 0; + unsigned char dimm_type = 0; + unsigned char firstSlot = 0; + + /*------------------------------------------------------------------ + * Set the SDRAM Controller On Die Termination Register + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_CODT, codt); + codt |= (SDRAM_CODT_IO_NMODE + & (~SDRAM_CODT_DQS_SINGLE_END + & ~SDRAM_CODT_CKSE_SINGLE_END + & ~SDRAM_CODT_FEEBBACK_RCV_SINGLE_END + & ~SDRAM_CODT_FEEBBACK_DRV_SINGLE_END)); + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5); + if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) { + dimm_rank = (dimm_rank & 0x0F) + 1; + dimm_type = SDRAM_DDR2; + } else { + dimm_rank = dimm_rank & 0x0F; + dimm_type = SDRAM_DDR1; + } + + total_rank += dimm_rank; + total_dimm ++; + if ((dimm_num == 0) && (total_dimm == 1)) + firstSlot = TRUE; + else + firstSlot = FALSE; + } + } + if (dimm_type == SDRAM_DDR2) { + codt |= SDRAM_CODT_DQS_1_8_V_DDR2; + if ((total_dimm == 1) && (firstSlot == TRUE)) { + if (total_rank == 1) { + codt |= 0x00800000; + modt0 = 0x01000000; + modt1 = 0x00000000; + modt2 = 0x00000000; + modt3 = 0x00000000; + } + if (total_rank == 2) { + codt |= 0x02800000; + modt0 = 0x06000000; + modt1 = 0x01800000; + modt2 = 0x00000000; + modt3 = 0x00000000; + } + } else { + if (total_rank == 1) { + codt |= 0x00800000; + modt0 = 0x01000000; + modt1 = 0x00000000; + modt2 = 0x00000000; + modt3 = 0x00000000; + } + if (total_rank == 2) { + codt |= 0x02800000; + modt0 = 0x06000000; + modt1 = 0x01800000; + modt2 = 0x00000000; + modt3 = 0x00000000; + } + } + if (total_dimm == 2) { + if (total_rank == 2) { + codt |= 0x08800000; + modt0 = 0x18000000; + modt1 = 0x00000000; + modt2 = 0x01800000; + modt3 = 0x00000000; + } + if (total_rank == 4) { + codt |= 0x2a800000; + modt0 = 0x18000000; + modt1 = 0x18000000; + modt2 = 0x01800000; + modt3 = 0x01800000; + } + } + } else { + codt |= SDRAM_CODT_DQS_2_5_V_DDR1; + modt0 = 0x00000000; + modt1 = 0x00000000; + modt2 = 0x00000000; + modt3 = 0x00000000; + + if (total_dimm == 1) { + if (total_rank == 1) + codt |= 0x00800000; + if (total_rank == 2) + codt |= 0x02800000; + } + if (total_dimm == 2) { + if (total_rank == 2) + codt |= 0x08800000; + if (total_rank == 4) + codt |= 0x2a800000; + } + } + + debug("nb of dimm %d\n", total_dimm); + debug("nb of rank %d\n", total_rank); + if (total_dimm == 1) + debug("dimm in slot %d\n", firstSlot); + + mtsdram(SDRAM_CODT, codt); + mtsdram(SDRAM_MODT0, modt0); + mtsdram(SDRAM_MODT1, modt1); + mtsdram(SDRAM_MODT2, modt2); + mtsdram(SDRAM_MODT3, modt3); +} + +/*-----------------------------------------------------------------------------+ + * program_initplr. + *-----------------------------------------------------------------------------*/ +static void program_initplr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks, + ddr_cas_id_t selected_cas) +{ + unsigned long MR_CAS_value = 0; + + /****************************************************** + ** Assumption: if more than one DIMM, all DIMMs are the same + ** as already checked in check_memory_type + ******************************************************/ + + if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) { + mtsdram(SDRAM_INITPLR0, 0x81B80000); + mtsdram(SDRAM_INITPLR1, 0x81900400); + mtsdram(SDRAM_INITPLR2, 0x81810000); + mtsdram(SDRAM_INITPLR3, 0xff800162); + mtsdram(SDRAM_INITPLR4, 0x81900400); + mtsdram(SDRAM_INITPLR5, 0x86080000); + mtsdram(SDRAM_INITPLR6, 0x86080000); + mtsdram(SDRAM_INITPLR7, 0x81000062); + } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) { + switch (selected_cas) { + /* + * The CAS latency is a field of the Mode Reg + * that need to be set from caller input. + * CAS bits in Mode Reg are starting at bit 4 at least for the Micron DDR2 + * this is the reason of the shift. + */ + case DDR_CAS_3: + MR_CAS_value = 3 << 4; + break; + case DDR_CAS_4: + MR_CAS_value = 4 << 4; + break; + case DDR_CAS_5: + MR_CAS_value = 5 << 4; + break; + default: + printf("ERROR: ucode error on selected_cas value %d", (unsigned char)selected_cas); + hang(); + break; + } + + mtsdram(SDRAM_INITPLR0, 0xB5380000); /* NOP */ + mtsdram(SDRAM_INITPLR1, 0x82100400); /* precharge 8 DDR clock cycle */ + mtsdram(SDRAM_INITPLR2, 0x80820000); /* EMR2 */ + mtsdram(SDRAM_INITPLR3, 0x80830000); /* EMR3 */ + mtsdram(SDRAM_INITPLR4, 0x80810000); /* EMR DLL ENABLE */ + mtsdram(SDRAM_INITPLR5, 0x80800502 | MR_CAS_value); /* MR w/ DLL reset */ + mtsdram(SDRAM_INITPLR6, 0x82100400); /* precharge 8 DDR clock cycle */ + mtsdram(SDRAM_INITPLR7, 0x8a080000); /* Refresh 50 DDR clock cycle */ + mtsdram(SDRAM_INITPLR8, 0x8a080000); /* Refresh 50 DDR clock cycle */ + mtsdram(SDRAM_INITPLR9, 0x8a080000); /* Refresh 50 DDR clock cycle */ + mtsdram(SDRAM_INITPLR10, 0x8a080000); /* Refresh 50 DDR clock cycle */ + mtsdram(SDRAM_INITPLR11, 0x80800402 | MR_CAS_value); /* MR w/o DLL reset */ + mtsdram(SDRAM_INITPLR12, 0x80810380); /* EMR OCD Default */ + mtsdram(SDRAM_INITPLR13, 0x80810000); /* EMR OCD Exit */ + } else { + printf("ERROR: ucode error as unknown DDR type in program_initplr"); + hang(); + } +} + +/*------------------------------------------------------------------ + * This routine programs the SDRAM_MMODE register. + * the selected_cas is an output parameter, that will be passed + * by caller to call the above program_initplr( ) + *-----------------------------------------------------------------*/ +static void program_mode(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks, + ddr_cas_id_t *selected_cas) +{ + unsigned long dimm_num; + unsigned long sdram_ddr1; + unsigned long t_wr_ns; + unsigned long t_wr_clk; + unsigned long cas_bit; + unsigned long cas_index; + unsigned long sdram_freq; + unsigned long ddr_check; + unsigned long mmode; + unsigned long tcyc_reg; + unsigned long cycle_2_0_clk; + unsigned long cycle_2_5_clk; + unsigned long cycle_3_0_clk; + unsigned long cycle_4_0_clk; + unsigned long cycle_5_0_clk; + unsigned long max_2_0_tcyc_ns_x_100; + unsigned long max_2_5_tcyc_ns_x_100; + unsigned long max_3_0_tcyc_ns_x_100; + unsigned long max_4_0_tcyc_ns_x_100; + unsigned long max_5_0_tcyc_ns_x_100; + unsigned long cycle_time_ns_x_100[3]; + PPC440_SYS_INFO board_cfg; + unsigned char cas_2_0_available; + unsigned char cas_2_5_available; + unsigned char cas_3_0_available; + unsigned char cas_4_0_available; + unsigned char cas_5_0_available; + unsigned long sdr_ddrpll; + + /*------------------------------------------------------------------ + * Get the board configuration info. + *-----------------------------------------------------------------*/ + get_sys_info(&board_cfg); + + mfsdr(sdr_ddr0, sdr_ddrpll); + sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1); + + /*------------------------------------------------------------------ + * Handle the timing. We need to find the worst case timing of all + * the dimm modules installed. + *-----------------------------------------------------------------*/ + t_wr_ns = 0; + cas_2_0_available = TRUE; + cas_2_5_available = TRUE; + cas_3_0_available = TRUE; + cas_4_0_available = TRUE; + cas_5_0_available = TRUE; + max_2_0_tcyc_ns_x_100 = 10; + max_2_5_tcyc_ns_x_100 = 10; + max_3_0_tcyc_ns_x_100 = 10; + max_4_0_tcyc_ns_x_100 = 10; + max_5_0_tcyc_ns_x_100 = 10; + sdram_ddr1 = TRUE; + + /* loop through all the DIMM slots on the board */ + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + /* If a dimm is installed in a particular slot ... */ + if (dimm_populated[dimm_num] != SDRAM_NONE) { + if (dimm_populated[dimm_num] == SDRAM_DDR1) + sdram_ddr1 = TRUE; + else + sdram_ddr1 = FALSE; + + /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */ + cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18); + + /* For a particular DIMM, grab the three CAS values it supports */ + for (cas_index = 0; cas_index < 3; cas_index++) { + switch (cas_index) { + case 0: + tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9); + break; + case 1: + tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23); + break; + default: + tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25); + break; + } + + if ((tcyc_reg & 0x0F) >= 10) { + if ((tcyc_reg & 0x0F) == 0x0D) { + /* Convert from hex to decimal */ + cycle_time_ns_x_100[cas_index] = (((tcyc_reg & 0xF0) >> 4) * 100) + 75; + } else { + printf("ERROR: SPD reported Tcyc is incorrect for DIMM " + "in slot %d\n", (unsigned int)dimm_num); + hang(); + } + } else { + /* Convert from hex to decimal */ + cycle_time_ns_x_100[cas_index] = (((tcyc_reg & 0xF0) >> 4) * 100) + + ((tcyc_reg & 0x0F)*10); + } + } + + /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */ + /* supported for a particular DIMM. */ + cas_index = 0; + + if (sdram_ddr1) { + /* + * DDR devices use the following bitmask for CAS latency: + * Bit 7 6 5 4 3 2 1 0 + * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0 + */ + if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_4_0_available = FALSE; + } + + if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_3_0_available = FALSE; + } + + if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_2_5_available = FALSE; + } + + if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_2_0_available = FALSE; + } + } else { + /* + * DDR2 devices use the following bitmask for CAS latency: + * Bit 7 6 5 4 3 2 1 0 + * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD + */ + if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_5_0_available = FALSE; + } + + if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_4_0_available = FALSE; + } + + if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) && (cycle_time_ns_x_100[cas_index] != 0)) { + max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100, cycle_time_ns_x_100[cas_index]); + cas_index++; + } else { + if (cas_index != 0) + cas_index++; + cas_3_0_available = FALSE; + } + } + } + } + + /*------------------------------------------------------------------ + * Set the SDRAM mode, SDRAM_MMODE + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MMODE, mmode); + mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK); + + cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100); + cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100); + cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100); + cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100); + cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100); + + if (sdram_ddr1 == TRUE) { /* DDR1 */ + if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) { + mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK; + *selected_cas = DDR_CAS_2; + } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) { + mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK; + *selected_cas = DDR_CAS_2_5; + } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) { + mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK; + *selected_cas = DDR_CAS_3; + } else { + printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); + printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); + printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); + hang(); + } + } else { /* DDR2 */ + if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) { + mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK; + *selected_cas = DDR_CAS_3; + } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) { + mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK; + *selected_cas = DDR_CAS_4; + } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) { + mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK; + *selected_cas = DDR_CAS_5; + } else { + printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); + printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n"); + printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); + hang(); + } + } + + if (sdram_ddr1 == TRUE) + mmode |= SDRAM_MMODE_WR_DDR1; + else { + + /* loop through all the DIMM slots on the board */ + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + /* If a dimm is installed in a particular slot ... */ + if (dimm_populated[dimm_num] != SDRAM_NONE) + t_wr_ns = max(t_wr_ns, + spd_read(iic0_dimm_addr[dimm_num], 36) >> 2); + } + + /* + * convert from nanoseconds to ddr clocks + * round up if necessary + */ + t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns); + if (sdram_freq != ddr_check) + t_wr_clk++; + + switch (t_wr_clk) { + case 0: + case 1: + case 2: + case 3: + mmode |= SDRAM_MMODE_WR_DDR2_3_CYC; + break; + case 4: + mmode |= SDRAM_MMODE_WR_DDR2_4_CYC; + break; + case 5: + mmode |= SDRAM_MMODE_WR_DDR2_5_CYC; + break; + default: + mmode |= SDRAM_MMODE_WR_DDR2_6_CYC; + break; + } + } + + mtsdram(SDRAM_MMODE, mmode); +} + +/*-----------------------------------------------------------------------------+ + * program_rtr. + *-----------------------------------------------------------------------------*/ +static void program_rtr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + PPC440_SYS_INFO board_cfg; + unsigned long max_refresh_rate; + unsigned long dimm_num; + unsigned long refresh_rate_type; + unsigned long refresh_rate; + unsigned long rint; + unsigned long sdram_freq; + unsigned long sdr_ddrpll; + unsigned long val; + + /*------------------------------------------------------------------ + * Get the board configuration info. + *-----------------------------------------------------------------*/ + get_sys_info(&board_cfg); + + /*------------------------------------------------------------------ + * Set the SDRAM Refresh Timing Register, SDRAM_RTR + *-----------------------------------------------------------------*/ + mfsdr(sdr_ddr0, sdr_ddrpll); + sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); + + max_refresh_rate = 0; + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + + refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12); + refresh_rate_type &= 0x7F; + switch (refresh_rate_type) { + case 0: + refresh_rate = 15625; + break; + case 1: + refresh_rate = 3906; + break; + case 2: + refresh_rate = 7812; + break; + case 3: + refresh_rate = 31250; + break; + case 4: + refresh_rate = 62500; + break; + case 5: + refresh_rate = 125000; + break; + default: + refresh_rate = 0; + printf("ERROR: DIMM %d unsupported refresh rate/type.\n", + (unsigned int)dimm_num); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + break; + } + + max_refresh_rate = max(max_refresh_rate, refresh_rate); + } + } + + rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION); + mfsdram(SDRAM_RTR, val); + mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) | + (SDRAM_RTR_RINT_ENCODE(rint))); +} + +/*------------------------------------------------------------------ + * This routine programs the SDRAM_TRx registers. + *-----------------------------------------------------------------*/ +static void program_tr(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long sdram_ddr1; + unsigned long t_rp_ns; + unsigned long t_rcd_ns; + unsigned long t_rrd_ns; + unsigned long t_ras_ns; + unsigned long t_rc_ns; + unsigned long t_rfc_ns; + unsigned long t_wpc_ns; + unsigned long t_wtr_ns; + unsigned long t_rpc_ns; + unsigned long t_rp_clk; + unsigned long t_rcd_clk; + unsigned long t_rrd_clk; + unsigned long t_ras_clk; + unsigned long t_rc_clk; + unsigned long t_rfc_clk; + unsigned long t_wpc_clk; + unsigned long t_wtr_clk; + unsigned long t_rpc_clk; + unsigned long sdtr1, sdtr2, sdtr3; + unsigned long ddr_check; + unsigned long sdram_freq; + unsigned long sdr_ddrpll; + + PPC440_SYS_INFO board_cfg; + + /*------------------------------------------------------------------ + * Get the board configuration info. + *-----------------------------------------------------------------*/ + get_sys_info(&board_cfg); + + mfsdr(sdr_ddr0, sdr_ddrpll); + sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll)); + + /*------------------------------------------------------------------ + * Handle the timing. We need to find the worst case timing of all + * the dimm modules installed. + *-----------------------------------------------------------------*/ + t_rp_ns = 0; + t_rrd_ns = 0; + t_rcd_ns = 0; + t_ras_ns = 0; + t_rc_ns = 0; + t_rfc_ns = 0; + t_wpc_ns = 0; + t_wtr_ns = 0; + t_rpc_ns = 0; + sdram_ddr1 = TRUE; + + /* loop through all the DIMM slots on the board */ + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + /* If a dimm is installed in a particular slot ... */ + if (dimm_populated[dimm_num] != SDRAM_NONE) { + if (dimm_populated[dimm_num] == SDRAM_DDR2) + sdram_ddr1 = TRUE; + else + sdram_ddr1 = FALSE; + + t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2); + t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2); + t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2); + t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30)); + t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41)); + t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42)); + } + } + + /*------------------------------------------------------------------ + * Set the SDRAM Timing Reg 1, SDRAM_TR1 + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_SDTR1, sdtr1); + sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK | + SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK); + + /* default values */ + sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK; + sdtr1 |= SDRAM_SDTR1_RTW_2_CLK; + + /* normal operations */ + sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK; + sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK; + + mtsdram(SDRAM_SDTR1, sdtr1); + + /*------------------------------------------------------------------ + * Set the SDRAM Timing Reg 2, SDRAM_TR2 + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_SDTR2, sdtr2); + sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK | + SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK | + SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK | + SDRAM_SDTR2_RRD_MASK); + + /* + * convert t_rcd from nanoseconds to ddr clocks + * round up if necessary + */ + t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns); + if (sdram_freq != ddr_check) + t_rcd_clk++; + + switch (t_rcd_clk) { + case 0: + case 1: + sdtr2 |= SDRAM_SDTR2_RCD_1_CLK; + break; + case 2: + sdtr2 |= SDRAM_SDTR2_RCD_2_CLK; + break; + case 3: + sdtr2 |= SDRAM_SDTR2_RCD_3_CLK; + break; + case 4: + sdtr2 |= SDRAM_SDTR2_RCD_4_CLK; + break; + default: + sdtr2 |= SDRAM_SDTR2_RCD_5_CLK; + break; + } + + if (sdram_ddr1 == TRUE) { /* DDR1 */ + if (sdram_freq < 200000000) { + sdtr2 |= SDRAM_SDTR2_WTR_1_CLK; + sdtr2 |= SDRAM_SDTR2_WPC_2_CLK; + sdtr2 |= SDRAM_SDTR2_RPC_2_CLK; + } else { + sdtr2 |= SDRAM_SDTR2_WTR_2_CLK; + sdtr2 |= SDRAM_SDTR2_WPC_3_CLK; + sdtr2 |= SDRAM_SDTR2_RPC_2_CLK; + } + } else { /* DDR2 */ + /* loop through all the DIMM slots on the board */ + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + /* If a dimm is installed in a particular slot ... */ + if (dimm_populated[dimm_num] != SDRAM_NONE) { + t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2); + t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2); + t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2); + } + } + + /* + * convert from nanoseconds to ddr clocks + * round up if necessary + */ + t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns); + if (sdram_freq != ddr_check) + t_wpc_clk++; + + switch (t_wpc_clk) { + case 0: + case 1: + case 2: + sdtr2 |= SDRAM_SDTR2_WPC_2_CLK; + break; + case 3: + sdtr2 |= SDRAM_SDTR2_WPC_3_CLK; + break; + case 4: + sdtr2 |= SDRAM_SDTR2_WPC_4_CLK; + break; + case 5: + sdtr2 |= SDRAM_SDTR2_WPC_5_CLK; + break; + default: + sdtr2 |= SDRAM_SDTR2_WPC_6_CLK; + break; + } + + /* + * convert from nanoseconds to ddr clocks + * round up if necessary + */ + t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns); + if (sdram_freq != ddr_check) + t_wtr_clk++; + + switch (t_wtr_clk) { + case 0: + case 1: + sdtr2 |= SDRAM_SDTR2_WTR_1_CLK; + break; + case 2: + sdtr2 |= SDRAM_SDTR2_WTR_2_CLK; + break; + case 3: + sdtr2 |= SDRAM_SDTR2_WTR_3_CLK; + break; + default: + sdtr2 |= SDRAM_SDTR2_WTR_4_CLK; + break; + } + + /* + * convert from nanoseconds to ddr clocks + * round up if necessary + */ + t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns); + if (sdram_freq != ddr_check) + t_rpc_clk++; + + switch (t_rpc_clk) { + case 0: + case 1: + case 2: + sdtr2 |= SDRAM_SDTR2_RPC_2_CLK; + break; + case 3: + sdtr2 |= SDRAM_SDTR2_RPC_3_CLK; + break; + default: + sdtr2 |= SDRAM_SDTR2_RPC_4_CLK; + break; + } + } + + /* default value */ + sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK; + + /* + * convert t_rrd from nanoseconds to ddr clocks + * round up if necessary + */ + t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns); + if (sdram_freq != ddr_check) + t_rrd_clk++; + + if (t_rrd_clk == 3) + sdtr2 |= SDRAM_SDTR2_RRD_3_CLK; + else + sdtr2 |= SDRAM_SDTR2_RRD_2_CLK; + + /* + * convert t_rp from nanoseconds to ddr clocks + * round up if necessary + */ + t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns); + if (sdram_freq != ddr_check) + t_rp_clk++; + + switch (t_rp_clk) { + case 0: + case 1: + case 2: + case 3: + sdtr2 |= SDRAM_SDTR2_RP_3_CLK; + break; + case 4: + sdtr2 |= SDRAM_SDTR2_RP_4_CLK; + break; + case 5: + sdtr2 |= SDRAM_SDTR2_RP_5_CLK; + break; + case 6: + sdtr2 |= SDRAM_SDTR2_RP_6_CLK; + break; + default: + sdtr2 |= SDRAM_SDTR2_RP_7_CLK; + break; + } + + mtsdram(SDRAM_SDTR2, sdtr2); + + /*------------------------------------------------------------------ + * Set the SDRAM Timing Reg 3, SDRAM_TR3 + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_SDTR3, sdtr3); + sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK | + SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK); + + /* + * convert t_ras from nanoseconds to ddr clocks + * round up if necessary + */ + t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns); + if (sdram_freq != ddr_check) + t_ras_clk++; + + sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk); + + /* + * convert t_rc from nanoseconds to ddr clocks + * round up if necessary + */ + t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns); + if (sdram_freq != ddr_check) + t_rc_clk++; + + sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk); + + /* default xcs value */ + sdtr3 |= SDRAM_SDTR3_XCS; + + /* + * convert t_rfc from nanoseconds to ddr clocks + * round up if necessary + */ + t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION); + ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns); + if (sdram_freq != ddr_check) + t_rfc_clk++; + + sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk); + + mtsdram(SDRAM_SDTR3, sdtr3); +} + +/*-----------------------------------------------------------------------------+ + * program_bxcf. + *-----------------------------------------------------------------------------*/ +static void program_bxcf(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long num_col_addr; + unsigned long num_ranks; + unsigned long num_banks; + unsigned long mode; + unsigned long ind_rank; + unsigned long ind; + unsigned long ind_bank; + unsigned long bank_0_populated; + + /*------------------------------------------------------------------ + * Set the BxCF regs. First, wipe out the bank config registers. + *-----------------------------------------------------------------*/ + mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF); + mtdcr(SDRAMC_CFGDATA, 0x00000000); + mtdcr(SDRAMC_CFGADDR, SDRAM_MB1CF); + mtdcr(SDRAMC_CFGDATA, 0x00000000); + mtdcr(SDRAMC_CFGADDR, SDRAM_MB2CF); + mtdcr(SDRAMC_CFGDATA, 0x00000000); + mtdcr(SDRAMC_CFGADDR, SDRAM_MB3CF); + mtdcr(SDRAMC_CFGDATA, 0x00000000); + + mode = SDRAM_BXCF_M_BE_ENABLE; + + bank_0_populated = 0; + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4); + num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5); + if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) + num_ranks = (num_ranks & 0x0F) +1; + else + num_ranks = num_ranks & 0x0F; + + num_banks = spd_read(iic0_dimm_addr[dimm_num], 17); + + for (ind_bank = 0; ind_bank < 2; ind_bank++) { + if (num_banks == 4) + ind = 0; + else + ind = 5; + switch (num_col_addr) { + case 0x08: + mode |= (SDRAM_BXCF_M_AM_0 + ind); + break; + case 0x09: + mode |= (SDRAM_BXCF_M_AM_1 + ind); + break; + case 0x0A: + mode |= (SDRAM_BXCF_M_AM_2 + ind); + break; + case 0x0B: + mode |= (SDRAM_BXCF_M_AM_3 + ind); + break; + case 0x0C: + mode |= (SDRAM_BXCF_M_AM_4 + ind); + break; + default: + printf("DDR-SDRAM: DIMM %d BxCF configuration.\n", + (unsigned int)dimm_num); + printf("ERROR: Unsupported value for number of " + "column addresses: %d.\n", (unsigned int)num_col_addr); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + } + } + + if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1)) + bank_0_populated = 1; + + for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) { + mtdcr(SDRAMC_CFGADDR, SDRAM_MB0CF + ((dimm_num + bank_0_populated + ind_rank) << 2)); + mtdcr(SDRAMC_CFGDATA, mode); + } + } + } +} + +/*------------------------------------------------------------------ + * program memory queue. + *-----------------------------------------------------------------*/ +static void program_memory_queue(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long dimm_num; + unsigned long rank_base_addr; + unsigned long rank_reg; + unsigned long rank_size_bytes; + unsigned long rank_size_id; + unsigned long num_ranks; + unsigned long baseadd_size; + unsigned long i; + unsigned long bank_0_populated = 0; + + /*------------------------------------------------------------------ + * Reset the rank_base_address. + *-----------------------------------------------------------------*/ + rank_reg = SDRAM_R0BAS; + + rank_base_addr = 0x00000000; + + for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) { + if (dimm_populated[dimm_num] != SDRAM_NONE) { + num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5); + if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) + num_ranks = (num_ranks & 0x0F) + 1; + else + num_ranks = num_ranks & 0x0F; + + rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31); + + /*------------------------------------------------------------------ + * Set the sizes + *-----------------------------------------------------------------*/ + baseadd_size = 0; + rank_size_bytes = 1024 * 1024 * rank_size_id; + switch (rank_size_id) { + case 0x02: + baseadd_size |= SDRAM_RXBAS_SDSZ_8; + break; + case 0x04: + baseadd_size |= SDRAM_RXBAS_SDSZ_16; + break; + case 0x08: + baseadd_size |= SDRAM_RXBAS_SDSZ_32; + break; + case 0x10: + baseadd_size |= SDRAM_RXBAS_SDSZ_64; + break; + case 0x20: + baseadd_size |= SDRAM_RXBAS_SDSZ_128; + break; + case 0x40: + baseadd_size |= SDRAM_RXBAS_SDSZ_256; + break; + case 0x80: + baseadd_size |= SDRAM_RXBAS_SDSZ_512; + break; + default: + printf("DDR-SDRAM: DIMM %d memory queue configuration.\n", + (unsigned int)dimm_num); + printf("ERROR: Unsupported value for the banksize: %d.\n", + (unsigned int)rank_size_id); + printf("Replace the DIMM module with a supported DIMM.\n\n"); + hang(); + } + + if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) + bank_0_populated = 1; + + for (i = 0; i < num_ranks; i++) { + mtdcr_any(rank_reg+i+dimm_num+bank_0_populated, + (rank_base_addr & SDRAM_RXBAS_SDBA_MASK) | + baseadd_size); + rank_base_addr += rank_size_bytes; + } + } + } +} + +/*-----------------------------------------------------------------------------+ + * is_ecc_enabled. + *-----------------------------------------------------------------------------*/ +static unsigned long is_ecc_enabled(void) +{ + unsigned long dimm_num; + unsigned long ecc; + unsigned long val; + + ecc = 0; + /* loop through all the DIMM slots on the board */ + for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { + mfsdram(SDRAM_MCOPT1, val); + ecc = max(ecc, SDRAM_MCOPT1_MCHK_CHK_DECODE(val)); + } + + return(ecc); +} + +/*-----------------------------------------------------------------------------+ + * program_ecc. + *-----------------------------------------------------------------------------*/ +static void program_ecc(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long mcopt1; + unsigned long mcopt2; + unsigned long mcstat; + unsigned long dimm_num; + unsigned long ecc; + + ecc = 0; + /* loop through all the DIMM slots on the board */ + for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { + /* If a dimm is installed in a particular slot ... */ + if (dimm_populated[dimm_num] != SDRAM_NONE) + ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11)); + } + if (ecc == 0) + return; + + mfsdram(SDRAM_MCOPT1, mcopt1); + mfsdram(SDRAM_MCOPT2, mcopt2); + + if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { + /* DDR controller must be enabled and not in self-refresh. */ + mfsdram(SDRAM_MCSTAT, mcstat); + if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE) + && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT) + && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK)) + == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) { + + program_ecc_addr(0, sdram_memsize()); + } + } + + return; +} + +/*-----------------------------------------------------------------------------+ + * program_ecc_addr. + *-----------------------------------------------------------------------------*/ +static void program_ecc_addr(unsigned long start_address, + unsigned long num_bytes) +{ + unsigned long current_address; + unsigned long end_address; + unsigned long address_increment; + unsigned long mcopt1; + + current_address = start_address; + mfsdram(SDRAM_MCOPT1, mcopt1); + if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) { + mtsdram(SDRAM_MCOPT1, + (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN); + sync(); + eieio(); + wait_ddr_idle(); + + /* ECC bit set method for non-cached memory */ + if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32) + address_increment = 4; + else + address_increment = 8; + end_address = current_address + num_bytes; + + while (current_address < end_address) { + *((unsigned long *)current_address) = 0x00000000; + current_address += address_increment; + } + sync(); + eieio(); + wait_ddr_idle(); + + mtsdram(SDRAM_MCOPT1, + (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK); + sync(); + eieio(); + wait_ddr_idle(); + } +} + +/*-----------------------------------------------------------------------------+ + * program_DQS_calibration. + *-----------------------------------------------------------------------------*/ +static void program_DQS_calibration(unsigned long *dimm_populated, + unsigned char *iic0_dimm_addr, + unsigned long num_dimm_banks) +{ + unsigned long val; + +#ifdef HARD_CODED_DQS /* calibration test with hardvalues */ + mtsdram(SDRAM_RQDC, 0x80000037); + mtsdram(SDRAM_RDCC, 0x40000000); + mtsdram(SDRAM_RFDC, 0x000001DF); + + test(); +#else + /*------------------------------------------------------------------ + * Program RDCC register + * Read sample cycle auto-update enable + *-----------------------------------------------------------------*/ + + /* + * Modified for the Katmai platform: with some DIMMs, the DDR2 + * controller automatically selects the T2 read cycle, but this + * proves unreliable. Go ahead and force the DDR2 controller + * to use the T4 sample and disable the automatic update of the + * RDSS field. + */ + mfsdram(SDRAM_RDCC, val); + mtsdram(SDRAM_RDCC, + (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK)) + | (SDRAM_RDCC_RDSS_T4 | SDRAM_RDCC_RSAE_DISABLE)); + + /*------------------------------------------------------------------ + * Program RQDC register + * Internal DQS delay mechanism enable + *-----------------------------------------------------------------*/ + mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38))); + + /*------------------------------------------------------------------ + * Program RFDC register + * Set Feedback Fractional Oversample + * Auto-detect read sample cycle enable + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_RFDC, val); + mtsdram(SDRAM_RFDC, + (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK | + SDRAM_RFDC_RFFD_MASK)) + | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0) | + SDRAM_RFDC_RFFD_ENCODE(0))); + + DQS_calibration_process(); +#endif +} + +static u32 short_mem_test(void) +{ + u32 *membase; + u32 bxcr_num; + u32 bxcf; + int i; + int j; + u32 test[NUMMEMTESTS][NUMMEMWORDS] = { + {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, + {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, + {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, + {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, + {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, + {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, + {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, + {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} }; + + for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) { + mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf); + + /* Banks enabled */ + if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { + + /* Bank is enabled */ + membase = (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num))); + + /*------------------------------------------------------------------ + * Run the short memory test. + *-----------------------------------------------------------------*/ + for (i = 0; i < NUMMEMTESTS; i++) { + for (j = 0; j < NUMMEMWORDS; j++) { + membase[j] = test[i][j]; + ppcDcbf((u32)&(membase[j])); + } + sync(); + for (j = 0; j < NUMMEMWORDS; j++) { + if (membase[j] != test[i][j]) { + ppcDcbf((u32)&(membase[j])); + break; + } + ppcDcbf((u32)&(membase[j])); + } + sync(); + if (j < NUMMEMWORDS) + break; + } + if (i < NUMMEMTESTS) + break; + } /* if bank enabled */ + } /* for bxcf_num */ + + return bxcr_num; +} + +#ifndef HARD_CODED_DQS +/*-----------------------------------------------------------------------------+ + * DQS_calibration_process. + *-----------------------------------------------------------------------------*/ +static void DQS_calibration_process(void) +{ + unsigned long ecc_temp; + unsigned long rfdc_reg; + unsigned long rffd; + unsigned long rqdc_reg; + unsigned long rqfd; + unsigned long bxcr_num; + unsigned long val; + long rqfd_average; + long rffd_average; + long max_start; + long min_end; + unsigned long begin_rqfd[MAXRANKS]; + unsigned long begin_rffd[MAXRANKS]; + unsigned long end_rqfd[MAXRANKS]; + unsigned long end_rffd[MAXRANKS]; + char window_found; + unsigned long dlycal; + unsigned long dly_val; + unsigned long max_pass_length; + unsigned long current_pass_length; + unsigned long current_fail_length; + unsigned long current_start; + long max_end; + unsigned char fail_found; + unsigned char pass_found; + + /*------------------------------------------------------------------ + * Test to determine the best read clock delay tuning bits. + * + * Before the DDR controller can be used, the read clock delay needs to be + * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD]. + * This value cannot be hardcoded into the program because it changes + * depending on the board's setup and environment. + * To do this, all delay values are tested to see if they + * work or not. By doing this, you get groups of fails with groups of + * passing values. The idea is to find the start and end of a passing + * window and take the center of it to use as the read clock delay. + * + * A failure has to be seen first so that when we hit a pass, we know + * that it is truely the start of the window. If we get passing values + * to start off with, we don't know if we are at the start of the window. + * + * The code assumes that a failure will always be found. + * If a failure is not found, there is no easy way to get the middle + * of the passing window. I guess we can pretty much pick any value + * but some values will be better than others. Since the lowest speed + * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed), + * from experimentation it is safe to say you will always have a failure. + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MCOPT1, ecc_temp); + ecc_temp &= SDRAM_MCOPT1_MCHK_MASK; + mfsdram(SDRAM_MCOPT1, val); + mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | + SDRAM_MCOPT1_MCHK_NON); + + max_start = 0; + min_end = 0; + begin_rqfd[0] = 0; + begin_rffd[0] = 0; + begin_rqfd[1] = 0; + begin_rffd[1] = 0; + end_rqfd[0] = 0; + end_rffd[0] = 0; + end_rqfd[1] = 0; + end_rffd[1] = 0; + window_found = FALSE; + + max_pass_length = 0; + max_start = 0; + max_end = 0; + current_pass_length = 0; + current_fail_length = 0; + current_start = 0; + window_found = FALSE; + fail_found = FALSE; + pass_found = FALSE; + + /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */ + /* rqdc_reg = mfsdram(SDRAM_RQDC) & ~(SDRAM_RQDC_RQFD_MASK); */ + + /* + * get the delay line calibration register value + */ + mfsdram(SDRAM_DLCR, dlycal); + dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2; + + for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) { + mfsdram(SDRAM_RFDC, rfdc_reg); + rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK); + + /*------------------------------------------------------------------ + * Set the timing reg for the test. + *-----------------------------------------------------------------*/ + mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd)); + + /* do the small memory test */ + bxcr_num = short_mem_test(); + + /*------------------------------------------------------------------ + * See if the rffd value passed. + *-----------------------------------------------------------------*/ + if (bxcr_num == MAXBXCF) { + if (fail_found == TRUE) { + pass_found = TRUE; + if (current_pass_length == 0) + current_start = rffd; + + current_fail_length = 0; + current_pass_length++; + + if (current_pass_length > max_pass_length) { + max_pass_length = current_pass_length; + max_start = current_start; + max_end = rffd; + } + } + } else { + current_pass_length = 0; + current_fail_length++; + + if (current_fail_length >= (dly_val >> 2)) { + if (fail_found == FALSE) { + fail_found = TRUE; + } else if (pass_found == TRUE) { + window_found = TRUE; + break; + } + } + } + } /* for rffd */ + + + /*------------------------------------------------------------------ + * Set the average RFFD value + *-----------------------------------------------------------------*/ + rffd_average = ((max_start + max_end) >> 1); + + if (rffd_average < 0) + rffd_average = 0; + + if (rffd_average > SDRAM_RFDC_RFFD_MAX) + rffd_average = SDRAM_RFDC_RFFD_MAX; + /* now fix RFDC[RFFD] found and find RQDC[RQFD] */ + mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average)); + + max_pass_length = 0; + max_start = 0; + max_end = 0; + current_pass_length = 0; + current_fail_length = 0; + current_start = 0; + window_found = FALSE; + fail_found = FALSE; + pass_found = FALSE; + + for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) { + mfsdram(SDRAM_RQDC, rqdc_reg); + rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK); + + /*------------------------------------------------------------------ + * Set the timing reg for the test. + *-----------------------------------------------------------------*/ + mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd)); + + /* do the small memory test */ + bxcr_num = short_mem_test(); + + /*------------------------------------------------------------------ + * See if the rffd value passed. + *-----------------------------------------------------------------*/ + if (bxcr_num == MAXBXCF) { + if (fail_found == TRUE) { + pass_found = TRUE; + if (current_pass_length == 0) + current_start = rqfd; + + current_fail_length = 0; + current_pass_length++; + + if (current_pass_length > max_pass_length) { + max_pass_length = current_pass_length; + max_start = current_start; + max_end = rqfd; + } + } + } else { + current_pass_length = 0; + current_fail_length++; + + if (fail_found == FALSE) { + fail_found = TRUE; + } else if (pass_found == TRUE) { + window_found = TRUE; + break; + } + } + } + + /*------------------------------------------------------------------ + * Make sure we found the valid read passing window. Halt if not + *-----------------------------------------------------------------*/ + if (window_found == FALSE) { + printf("ERROR: Cannot determine a common read delay for the " + "DIMM(s) installed.\n"); + debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); + hang(); + } + + rqfd_average = ((max_start + max_end) >> 1); + + if (rqfd_average < 0) + rqfd_average = 0; + + if (rqfd_average > SDRAM_RQDC_RQFD_MAX) + rqfd_average = SDRAM_RQDC_RQFD_MAX; + + /*------------------------------------------------------------------ + * Restore the ECC variable to what it originally was + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MCOPT1, val); + mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | ecc_temp); + + mtsdram(SDRAM_RQDC, + (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) | + SDRAM_RQDC_RQFD_ENCODE(rqfd_average)); + + mfsdram(SDRAM_DLCR, val); + debug("%s[%d] DLCR: 0x%08X\n", __FUNCTION__, __LINE__, val); + mfsdram(SDRAM_RQDC, val); + debug("%s[%d] RQDC: 0x%08X\n", __FUNCTION__, __LINE__, val); + mfsdram(SDRAM_RFDC, val); + debug("%s[%d] RFDC: 0x%08X\n", __FUNCTION__, __LINE__, val); +} +#else /* calibration test with hardvalues */ +/*-----------------------------------------------------------------------------+ + * DQS_calibration_process. + *-----------------------------------------------------------------------------*/ +static void test(void) +{ + unsigned long dimm_num; + unsigned long ecc_temp; + unsigned long i, j; + unsigned long *membase; + unsigned long bxcf[MAXRANKS]; + unsigned long val; + char window_found; + char begin_found[MAXDIMMS]; + char end_found[MAXDIMMS]; + char search_end[MAXDIMMS]; + unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = { + {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF}, + {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000}, + {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555}, + {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA}, + {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A}, + {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5}, + {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA}, + {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} }; + + /*------------------------------------------------------------------ + * Test to determine the best read clock delay tuning bits. + * + * Before the DDR controller can be used, the read clock delay needs to be + * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD]. + * This value cannot be hardcoded into the program because it changes + * depending on the board's setup and environment. + * To do this, all delay values are tested to see if they + * work or not. By doing this, you get groups of fails with groups of + * passing values. The idea is to find the start and end of a passing + * window and take the center of it to use as the read clock delay. + * + * A failure has to be seen first so that when we hit a pass, we know + * that it is truely the start of the window. If we get passing values + * to start off with, we don't know if we are at the start of the window. + * + * The code assumes that a failure will always be found. + * If a failure is not found, there is no easy way to get the middle + * of the passing window. I guess we can pretty much pick any value + * but some values will be better than others. Since the lowest speed + * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed), + * from experimentation it is safe to say you will always have a failure. + *-----------------------------------------------------------------*/ + mfsdram(SDRAM_MCOPT1, ecc_temp); + ecc_temp &= SDRAM_MCOPT1_MCHK_MASK; + mfsdram(SDRAM_MCOPT1, val); + mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) | + SDRAM_MCOPT1_MCHK_NON); + + window_found = FALSE; + begin_found[0] = FALSE; + end_found[0] = FALSE; + search_end[0] = FALSE; + begin_found[1] = FALSE; + end_found[1] = FALSE; + search_end[1] = FALSE; + + for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) { + mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]); + + /* Banks enabled */ + if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) { + + /* Bank is enabled */ + membase = + (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num))); + + /*------------------------------------------------------------------ + * Run the short memory test. + *-----------------------------------------------------------------*/ + for (i = 0; i < NUMMEMTESTS; i++) { + for (j = 0; j < NUMMEMWORDS; j++) { + membase[j] = test[i][j]; + ppcDcbf((u32)&(membase[j])); + } + sync(); + for (j = 0; j < NUMMEMWORDS; j++) { + if (membase[j] != test[i][j]) { + ppcDcbf((u32)&(membase[j])); + break; + } + ppcDcbf((u32)&(membase[j])); + } + sync(); + if (j < NUMMEMWORDS) + break; + } + + /*------------------------------------------------------------------ + * See if the rffd value passed. + *-----------------------------------------------------------------*/ + if (i < NUMMEMTESTS) { + if ((end_found[dimm_num] == FALSE) && + (search_end[dimm_num] == TRUE)) { + end_found[dimm_num] = TRUE; + } + if ((end_found[0] == TRUE) && + (end_found[1] == TRUE)) + break; + } else { + if (begin_found[dimm_num] == FALSE) { + begin_found[dimm_num] = TRUE; + search_end[dimm_num] = TRUE; + } + } + } else { + begin_found[dimm_num] = TRUE; + end_found[dimm_num] = TRUE; + } + } + + if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE)) + window_found = TRUE; + + /*------------------------------------------------------------------ + * Make sure we found the valid read passing window. Halt if not + *-----------------------------------------------------------------*/ + if (window_found == FALSE) { + printf("ERROR: Cannot determine a common read delay for the " + "DIMM(s) installed.\n"); + hang(); + } + + /*------------------------------------------------------------------ + * Restore the ECC variable to what it originally was + *-----------------------------------------------------------------*/ + mtsdram(SDRAM_MCOPT1, + (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK) + | ecc_temp); +} +#endif + +#if defined(DEBUG) +static void ppc440sp_sdram_register_dump(void) +{ + unsigned int sdram_reg; + unsigned int sdram_data; + unsigned int dcr_data; + + printf("\n Register Dump:\n"); + sdram_reg = SDRAM_MCSTAT; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MCSTAT = 0x%08X", sdram_data); + sdram_reg = SDRAM_MCOPT1; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MCOPT1 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_MCOPT2; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MCOPT2 = 0x%08X", sdram_data); + sdram_reg = SDRAM_MODT0; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MODT0 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_MODT1; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MODT1 = 0x%08X", sdram_data); + sdram_reg = SDRAM_MODT2; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MODT2 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_MODT3; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MODT3 = 0x%08X", sdram_data); + sdram_reg = SDRAM_CODT; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_CODT = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_VVPR; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_VVPR = 0x%08X", sdram_data); + sdram_reg = SDRAM_OPARS; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_OPARS = 0x%08X\n", sdram_data); + /* + * OPAR2 is only used as a trigger register. + * No data is contained in this register, and reading or writing + * to is can cause bad things to happen (hangs). Just skip it + * and report NA + * sdram_reg = SDRAM_OPAR2; + * mfsdram(sdram_reg, sdram_data); + * printf(" SDRAM_OPAR2 = 0x%08X\n", sdram_data); + */ + printf(" SDRAM_OPART = N/A "); + sdram_reg = SDRAM_RTR; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_RTR = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_MB0CF; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MB0CF = 0x%08X", sdram_data); + sdram_reg = SDRAM_MB1CF; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MB1CF = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_MB2CF; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MB2CF = 0x%08X", sdram_data); + sdram_reg = SDRAM_MB3CF; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MB3CF = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR0; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR0 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR1; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR1 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR2; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR2 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR3; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR3 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR4; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR4 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR5; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR5 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR6; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR6 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR7; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR7 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR8; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR8 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR9; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR9 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR10; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR10 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR11; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR11 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR12; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR12 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR13; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR13 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_INITPLR14; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR14 = 0x%08X", sdram_data); + sdram_reg = SDRAM_INITPLR15; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_INITPLR15 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_RQDC; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_RQDC = 0x%08X", sdram_data); + sdram_reg = SDRAM_RFDC; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_RFDC = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_RDCC; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_RDCC = 0x%08X", sdram_data); + sdram_reg = SDRAM_DLCR; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_DLCR = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_CLKTR; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_CLKTR = 0x%08X", sdram_data); + sdram_reg = SDRAM_WRDTR; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_WRDTR = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_SDTR1; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_SDTR1 = 0x%08X", sdram_data); + sdram_reg = SDRAM_SDTR2; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_SDTR2 = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_SDTR3; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_SDTR3 = 0x%08X", sdram_data); + sdram_reg = SDRAM_MMODE; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MMODE = 0x%08X\n", sdram_data); + sdram_reg = SDRAM_MEMODE; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_MEMODE = 0x%08X", sdram_data); + sdram_reg = SDRAM_ECCCR; + mfsdram(sdram_reg, sdram_data); + printf(" SDRAM_ECCCR = 0x%08X\n\n", sdram_data); + + dcr_data = mfdcr(SDRAM_R0BAS); + printf(" MQ0_B0BAS = 0x%08X", dcr_data); + dcr_data = mfdcr(SDRAM_R1BAS); + printf(" MQ1_B0BAS = 0x%08X\n", dcr_data); + dcr_data = mfdcr(SDRAM_R2BAS); + printf(" MQ2_B0BAS = 0x%08X", dcr_data); + dcr_data = mfdcr(SDRAM_R3BAS); + printf(" MQ3_B0BAS = 0x%08X\n", dcr_data); +} +#endif +#endif /* CONFIG_SPD_EEPROM */ diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c new file mode 100644 index 0000000000..8c605591b8 --- /dev/null +++ b/cpu/ppc4xx/tlb.c @@ -0,0 +1,184 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#if defined(CONFIG_440) + +#include +#include +#include +#include + +typedef struct region { + unsigned long base; + unsigned long size; + unsigned long tlb_word2_i_value; +} region_t; + +static int add_tlb_entry(unsigned long base_addr, + unsigned long tlb_word0_size_value, + unsigned long tlb_word2_i_value) +{ + int i; + unsigned long tlb_word0_value; + unsigned long tlb_word1_value; + unsigned long tlb_word2_value; + + /* First, find the index of a TLB entry not being used */ + for (i=0; i= PPC4XX_TLB_SIZE) + return -1; + + /* Second, create the TLB entry */ + tlb_word0_value = TLB_WORD0_EPN_ENCODE(base_addr) | TLB_WORD0_V_ENABLE | + TLB_WORD0_TS_0 | tlb_word0_size_value; + tlb_word1_value = TLB_WORD1_RPN_ENCODE(base_addr) | TLB_WORD1_ERPN_ENCODE(0); + tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE | + TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE | + TLB_WORD2_W_DISABLE | tlb_word2_i_value | + TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE | + TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE | + TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE | + TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE | + TLB_WORD2_SR_ENABLE; + + /* Wait for all memory accesses to complete */ + sync(); + + /* Third, add the TLB entries */ + mttlb1(i, tlb_word0_value); + mttlb2(i, tlb_word1_value); + mttlb3(i, tlb_word2_value); + + /* Execute an ISYNC instruction so that the new TLB entry takes effect */ + asm("isync"); + + return 0; +} + +static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, + unsigned long tlb_word2_i_value) +{ + int rc; + int tlb_i; + + tlb_i = tlb_word2_i_value; + while (mem_size != 0) { + rc = 0; + /* Add the TLB entries in to map the region. */ + if (((base_addr & TLB_256MB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_256MB_SIZE)) { + /* Add a 256MB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { + mem_size -= TLB_256MB_SIZE; + base_addr += TLB_256MB_SIZE; + } + } else if (((base_addr & TLB_16MB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_16MB_SIZE)) { + /* Add a 16MB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { + mem_size -= TLB_16MB_SIZE; + base_addr += TLB_16MB_SIZE; + } + } else if (((base_addr & TLB_1MB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_1MB_SIZE)) { + /* Add a 1MB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { + mem_size -= TLB_1MB_SIZE; + base_addr += TLB_1MB_SIZE; + } + } else if (((base_addr & TLB_256KB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_256KB_SIZE)) { + /* Add a 256KB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { + mem_size -= TLB_256KB_SIZE; + base_addr += TLB_256KB_SIZE; + } + } else if (((base_addr & TLB_64KB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_64KB_SIZE)) { + /* Add a 64KB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { + mem_size -= TLB_64KB_SIZE; + base_addr += TLB_64KB_SIZE; + } + } else if (((base_addr & TLB_16KB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_16KB_SIZE)) { + /* Add a 16KB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { + mem_size -= TLB_16KB_SIZE; + base_addr += TLB_16KB_SIZE; + } + } else if (((base_addr & TLB_4KB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_4KB_SIZE)) { + /* Add a 4KB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { + mem_size -= TLB_4KB_SIZE; + base_addr += TLB_4KB_SIZE; + } + } else if (((base_addr & TLB_1KB_ALIGN_MASK) == base_addr) && + (mem_size >= TLB_1KB_SIZE)) { + /* Add a 1KB TLB entry */ + if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { + mem_size -= TLB_1KB_SIZE; + base_addr += TLB_1KB_SIZE; + } + } else { + printf("ERROR: no TLB size exists for the base address 0x%0X.\n", + base_addr); + } + + if (rc != 0) + printf("ERROR: no TLB entries available for the base addr 0x%0X.\n", + base_addr); + } + + return; +} + +/* + * Program one (or multiple) TLB entries for one memory region + * + * Common usage for boards with SDRAM DIMM modules to dynamically + * configure the TLB's for the SDRAM + */ +void program_tlb(u32 start, u32 size) +{ + region_t region_array; + + region_array.base = start; + region_array.size = size; + region_array.tlb_word2_i_value = TLB_WORD2_I_ENABLE; /* disable cache (for now) */ + + /* Call the routine to add in the tlb entries for the memory regions */ + program_tlb_addr(region_array.base, region_array.size, + region_array.tlb_word2_i_value); + + return; +} + +#endif /* CONFIG_440 */ diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 914f28b461..b226825ee2 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -335,41 +335,6 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); * instructions. */ -#define TLB_LO 1 -#define TLB_HI 0 - -#define TLB_DATA TLB_LO -#define TLB_TAG TLB_HI - -/* Tag portion */ - -#define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */ -#define TLB_PAGESZ_MASK 0x00000380 -#define TLB_PAGESZ(x) (((x) & 0x7) << 7) -#define PAGESZ_1K 0 -#define PAGESZ_4K 1 -#define PAGESZ_16K 2 -#define PAGESZ_64K 3 -#define PAGESZ_256K 4 -#define PAGESZ_1M 5 -#define PAGESZ_4M 6 -#define PAGESZ_16M 7 -#define TLB_VALID 0x00000040 /* Entry is valid */ - -/* Data portion */ - -#define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */ -#define TLB_PERM_MASK 0x00000300 -#define TLB_EX 0x00000200 /* Instruction execution allowed */ -#define TLB_WR 0x00000100 /* Writes permitted */ -#define TLB_ZSEL_MASK 0x000000F0 -#define TLB_ZSEL(x) (((x) & 0xF) << 4) -#define TLB_ATTR_MASK 0x0000000F -#define TLB_W 0x00000008 /* Caching is write-through */ -#define TLB_I 0x00000004 /* Caching is inhibited */ -#define TLB_M 0x00000002 /* Memory is coherent */ -#define TLB_G 0x00000001 /* Memory is guarded from prefetch */ - /* * e500 support */ @@ -482,7 +447,162 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define LAWAR_SIZE_16G (LAWAR_SIZE_BASE+23) #define LAWAR_SIZE_32G (LAWAR_SIZE_BASE+24) -#ifdef CONFIG_440SPE +#ifdef CONFIG_440 +/* General */ +#define TLB_VALID 0x00000200 + +/* Supported page sizes */ + +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ((EPN((epn)) | (sz) | TLB_VALID )) +#define TLB1(rpn,erpn) (((rpn) & 0xfffffc00) | (erpn)) +#define TLB2(a) ((a) & 0x00000fbf) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ;\ +0: mflr r0 ;\ + mtlr r1 ;\ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + +/*----------------------------------------------------------------------------+ +| TLB specific defines. ++----------------------------------------------------------------------------*/ +#define TLB_256MB_ALIGN_MASK 0xF0000000 +#define TLB_16MB_ALIGN_MASK 0xFF000000 +#define TLB_1MB_ALIGN_MASK 0xFFF00000 +#define TLB_256KB_ALIGN_MASK 0xFFFC0000 +#define TLB_64KB_ALIGN_MASK 0xFFFF0000 +#define TLB_16KB_ALIGN_MASK 0xFFFFC000 +#define TLB_4KB_ALIGN_MASK 0xFFFFF000 +#define TLB_1KB_ALIGN_MASK 0xFFFFFC00 +#define TLB_256MB_SIZE 0x10000000 +#define TLB_16MB_SIZE 0x01000000 +#define TLB_1MB_SIZE 0x00100000 +#define TLB_256KB_SIZE 0x00040000 +#define TLB_64KB_SIZE 0x00010000 +#define TLB_16KB_SIZE 0x00004000 +#define TLB_4KB_SIZE 0x00001000 +#define TLB_1KB_SIZE 0x00000400 + +#define TLB_WORD0_EPN_MASK 0xFFFFFC00 +#define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD0_V_MASK 0x00000200 +#define TLB_WORD0_V_ENABLE 0x00000200 +#define TLB_WORD0_V_DISABLE 0x00000000 +#define TLB_WORD0_TS_MASK 0x00000100 +#define TLB_WORD0_TS_1 0x00000100 +#define TLB_WORD0_TS_0 0x00000000 +#define TLB_WORD0_SIZE_MASK 0x000000F0 +#define TLB_WORD0_SIZE_1KB 0x00000000 +#define TLB_WORD0_SIZE_4KB 0x00000010 +#define TLB_WORD0_SIZE_16KB 0x00000020 +#define TLB_WORD0_SIZE_64KB 0x00000030 +#define TLB_WORD0_SIZE_256KB 0x00000040 +#define TLB_WORD0_SIZE_1MB 0x00000050 +#define TLB_WORD0_SIZE_16MB 0x00000070 +#define TLB_WORD0_SIZE_256MB 0x00000090 +#define TLB_WORD0_TPAR_MASK 0x0000000F +#define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) +#define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) + +#define TLB_WORD1_RPN_MASK 0xFFFFFC00 +#define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) +#define TLB_WORD1_PAR1_MASK 0x00000300 +#define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) +#define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03) +#define TLB_WORD1_PAR1_0 0x00000000 +#define TLB_WORD1_PAR1_1 0x00000100 +#define TLB_WORD1_PAR1_2 0x00000200 +#define TLB_WORD1_PAR1_3 0x00000300 +#define TLB_WORD1_ERPN_MASK 0x0000000F +#define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) +#define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) + +#define TLB_WORD2_PAR2_MASK 0xC0000000 +#define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30) +#define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03) +#define TLB_WORD2_PAR2_0 0x00000000 +#define TLB_WORD2_PAR2_1 0x40000000 +#define TLB_WORD2_PAR2_2 0x80000000 +#define TLB_WORD2_PAR2_3 0xC0000000 +#define TLB_WORD2_U0_MASK 0x00008000 +#define TLB_WORD2_U0_ENABLE 0x00008000 +#define TLB_WORD2_U0_DISABLE 0x00000000 +#define TLB_WORD2_U1_MASK 0x00004000 +#define TLB_WORD2_U1_ENABLE 0x00004000 +#define TLB_WORD2_U1_DISABLE 0x00000000 +#define TLB_WORD2_U2_MASK 0x00002000 +#define TLB_WORD2_U2_ENABLE 0x00002000 +#define TLB_WORD2_U2_DISABLE 0x00000000 +#define TLB_WORD2_U3_MASK 0x00001000 +#define TLB_WORD2_U3_ENABLE 0x00001000 +#define TLB_WORD2_U3_DISABLE 0x00000000 +#define TLB_WORD2_W_MASK 0x00000800 +#define TLB_WORD2_W_ENABLE 0x00000800 +#define TLB_WORD2_W_DISABLE 0x00000000 +#define TLB_WORD2_I_MASK 0x00000400 +#define TLB_WORD2_I_ENABLE 0x00000400 +#define TLB_WORD2_I_DISABLE 0x00000000 +#define TLB_WORD2_M_MASK 0x00000200 +#define TLB_WORD2_M_ENABLE 0x00000200 +#define TLB_WORD2_M_DISABLE 0x00000000 +#define TLB_WORD2_G_MASK 0x00000100 +#define TLB_WORD2_G_ENABLE 0x00000100 +#define TLB_WORD2_G_DISABLE 0x00000000 +#define TLB_WORD2_E_MASK 0x00000080 +#define TLB_WORD2_E_ENABLE 0x00000080 +#define TLB_WORD2_E_DISABLE 0x00000000 +#define TLB_WORD2_UX_MASK 0x00000020 +#define TLB_WORD2_UX_ENABLE 0x00000020 +#define TLB_WORD2_UX_DISABLE 0x00000000 +#define TLB_WORD2_UW_MASK 0x00000010 +#define TLB_WORD2_UW_ENABLE 0x00000010 +#define TLB_WORD2_UW_DISABLE 0x00000000 +#define TLB_WORD2_UR_MASK 0x00000008 +#define TLB_WORD2_UR_ENABLE 0x00000008 +#define TLB_WORD2_UR_DISABLE 0x00000000 +#define TLB_WORD2_SX_MASK 0x00000004 +#define TLB_WORD2_SX_ENABLE 0x00000004 +#define TLB_WORD2_SX_DISABLE 0x00000000 +#define TLB_WORD2_SW_MASK 0x00000002 +#define TLB_WORD2_SW_ENABLE 0x00000002 +#define TLB_WORD2_SW_DISABLE 0x00000000 +#define TLB_WORD2_SR_MASK 0x00000001 +#define TLB_WORD2_SR_ENABLE 0x00000001 +#define TLB_WORD2_SR_DISABLE 0x00000000 + /*----------------------------------------------------------------------------+ | Following instructions are not available in Book E mode of the GNU assembler. +----------------------------------------------------------------------------*/ @@ -516,11 +636,15 @@ extern int write_bat(ppc_bat_t bat, unsigned long upper, unsigned long lower); #define MBAR_INST .long 0x7c000000|\ (854<<1) -/*----------------------------------------------------------------------------+ -| Following instruction is not available in PPC405 mode of the GNU assembler. -+----------------------------------------------------------------------------*/ -#define TLBRE(rt,ra,ws) .long 0x7c000000|\ - (rt<<21)|(ra<<16)|(ws<<11)|(946<<1) +#ifndef __ASSEMBLY__ +/* Prototypes */ +void mttlb1(unsigned long index, unsigned long value); +void mttlb2(unsigned long index, unsigned long value); +void mttlb3(unsigned long index, unsigned long value); +unsigned long mftlb1(unsigned long index); +unsigned long mftlb2(unsigned long index); +unsigned long mftlb3(unsigned long index); +#endif /* __ASSEMBLY__ */ -#endif +#endif /* CONFIG_440 */ #endif /* _PPC_MMU_H_ */ From 0dc018ece13effc689e47479ea9ebf1c98a507f5 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 10:51:26 +0100 Subject: [PATCH 18/30] [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT This patch switches to the desired I2C bus when the date/dtt commands are called. This can be configured using the CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. Signed-off-by: Stefan Roese --- README | 10 ++++++++++ common/cmd_date.c | 14 ++++++++++++-- common/cmd_dtt.c | 12 ++++++++++-- dtt/adm1021.c | 13 ++++++++----- 4 files changed, 40 insertions(+), 9 deletions(-) diff --git a/README b/README index ecfd1f82f0..15428643ed 100644 --- a/README +++ b/README @@ -1347,6 +1347,16 @@ The following options need to be configured: If defined, then this indicates the I2C bus number for DDR SPD. If not defined, then U-Boot assumes that SPD is on I2C bus 0. + CFG_RTC_BUS_NUM + + If defined, then this indicates the I2C bus number for the RTC. + If not defined, then U-Boot assumes that RTC is on I2C bus 0. + + CFG_DTT_BUS_NUM + + If defined, then this indicates the I2C bus number for the DTT. + If not defined, then U-Boot assumes that DTT is on I2C bus 0. + CONFIG_FSL_I2C Define this option if you want to use Freescale's I2C driver in diff --git a/common/cmd_date.c b/common/cmd_date.c index 84932f7568..33d2e5661e 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -27,6 +27,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -44,6 +45,11 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { struct rtc_time tm; int rcode = 0; + int old_bus; + + /* switch to correct I2C bus */ + old_bus = I2C_GET_BUS(); + I2C_SET_BUS(CFG_RTC_BUS_NUM); switch (argc) { case 2: /* set date & time */ @@ -56,7 +62,7 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* insert new date & time */ if (mk_date (argv[1], &tm) != 0) { puts ("## Bad date format\n"); - return 1; + break; } /* and write to RTC */ rtc_set (&tm); @@ -71,11 +77,15 @@ int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) "unknown " : RELOC(weekdays[tm.tm_wday]), tm.tm_hour, tm.tm_min, tm.tm_sec); - return 0; + break; default: printf ("Usage:\n%s\n", cmdtp->usage); rcode = 1; } + + /* switch back to original I2C bus */ + I2C_SET_BUS(old_bus); + return rcode; } diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index 9db64e9e3d..4f7b049d79 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -28,19 +28,27 @@ #if (CONFIG_COMMANDS & CFG_CMD_DTT) #include +#include int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { int i; unsigned char sensors[] = CONFIG_DTT_SENSORS; + int old_bus; + + /* switch to correct I2C bus */ + old_bus = I2C_GET_BUS(); + I2C_SET_BUS(CFG_DTT_BUS_NUM); /* * Loop through sensors, read * temperature, and output it. */ - for (i = 0; i < sizeof (sensors); i++) { + for (i = 0; i < sizeof (sensors); i++) printf ("DTT%d: %i C\n", i + 1, dtt_get_temp (sensors[i])); - } + + /* switch back to original I2C bus */ + I2C_SET_BUS(old_bus); return 0; } /* do_dtt() */ diff --git a/dtt/adm1021.c b/dtt/adm1021.c index 14c38f0a83..9f65cfb274 100644 --- a/dtt/adm1021.c +++ b/dtt/adm1021.c @@ -144,12 +144,15 @@ dtt_init (void) unsigned char sensors[] = CONFIG_DTT_SENSORS; const char *const header = "DTT: "; + /* switch to correct I2C bus */ + I2C_SET_BUS(CFG_DTT_BUS_NUM); + for (i = 0; i < sizeof(sensors); i++) { - if (_dtt_init(sensors[i]) != 0) - printf ("%s%d FAILED INIT\n", header, i+1); - else - printf ("%s%d is %i C\n", header, i+1, - dtt_get_temp(sensors[i])); + if (_dtt_init(sensors[i]) != 0) + printf ("%s%d FAILED INIT\n", header, i+1); + else + printf ("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); } return (0); From 4745acaa1a603b67f6b9b7970365ebadd7d6586f Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 10:57:08 +0100 Subject: [PATCH 19/30] [PATCH] Add support for the AMCC Katmai (440SPe) eval board Signed-off-by: Stefan Roese --- MAINTAINERS | 1 + MAKEALL | 18 +- Makefile | 3 + board/amcc/katmai/Makefile | 51 ++++ board/amcc/katmai/cmd_katmai.c | 267 +++++++++++++++++ board/amcc/katmai/config.mk | 38 +++ board/amcc/katmai/init.S | 108 +++++++ board/amcc/katmai/katmai.c | 514 +++++++++++++++++++++++++++++++++ board/amcc/katmai/katmai.h | 65 +++++ board/amcc/katmai/u-boot.lds | 157 ++++++++++ cpu/ppc4xx/cpu_init.c | 2 +- cpu/ppc4xx/speed.c | 13 +- cpu/ppc4xx/start.S | 57 ++++ include/configs/katmai.h | 415 ++++++++++++++++++++++++++ include/ppc405.h | 1 + include/ppc440.h | 9 +- 16 files changed, 1700 insertions(+), 19 deletions(-) create mode 100644 board/amcc/katmai/Makefile create mode 100644 board/amcc/katmai/cmd_katmai.c create mode 100644 board/amcc/katmai/config.mk create mode 100644 board/amcc/katmai/init.S create mode 100644 board/amcc/katmai/katmai.c create mode 100644 board/amcc/katmai/katmai.h create mode 100644 board/amcc/katmai/u-boot.lds create mode 100644 include/configs/katmai.h diff --git a/MAINTAINERS b/MAINTAINERS index f90c5a65ff..1d0a8dfdb3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -288,6 +288,7 @@ Stefan Roese bamboo PPC440EP bunbinga PPC405EP ebony PPC440GP + katmai PPC440SPe ocotea PPC440GX p3p440 PPC440GP pcs440ep PPC440EP diff --git a/MAKEALL b/MAKEALL index d943cee45f..c9f5958269 100755 --- a/MAKEALL +++ b/MAKEALL @@ -81,15 +81,15 @@ LIST_4xx=" \ CRAYL1 csb272 csb472 DASA_SIM \ DP405 DU405 ebony ERIC \ EXBITGEN G2000 HH405 HUB405 \ - JSE KAREF luan METROBOX \ - MIP405 MIP405T ML2 ml300 \ - ocotea OCRTC ORSG p3p440 \ - PCI405 pcs440ep PIP405 PLU405 \ - PMC405 PPChameleonEVB sbc405 sc3 \ - sequoia sequoia_nand taishan VOH405 \ - VOM405 W7OLMC W7OLMG walnut \ - WUH405 XPEDITE1K yellowstone yosemite \ - yucca \ + JSE KAREF katmai luan \ + METROBOX MIP405 MIP405T ML2 \ + ml300 ocotea OCRTC ORSG \ + p3p440 PCI405 pcs440ep PIP405 \ + PLU405 PMC405 PPChameleonEVB sbc405 \ + sc3 sequoia sequoia_nand taishan \ + VOH405 VOM405 W7OLMC W7OLMG \ + walnut WUH405 XPEDITE1K yellowstone \ + yosemite yucca \ " ######################################################################### diff --git a/Makefile b/Makefile index f39ff652f5..546a808157 100644 --- a/Makefile +++ b/Makefile @@ -1092,6 +1092,9 @@ JSE_config: unconfig KAREF_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst +katmai_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc + luan_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc diff --git a/board/amcc/katmai/Makefile b/board/amcc/katmai/Makefile new file mode 100644 index 0000000000..d06a402d17 --- /dev/null +++ b/board/amcc/katmai/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o cmd_katmai.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend *~ + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c new file mode 100644 index 0000000000..684f6a5863 --- /dev/null +++ b/board/amcc/katmai/cmd_katmai.c @@ -0,0 +1,267 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include + +static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + uchar chip; + ulong data; + int nbytes; + extern char console_buffer[]; + + char sysClock[4]; + char cpuClock[4]; + char plbClock[4]; + char pcixClock[4]; + + if (argc < 3) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if (strcmp(argv[2], "prom0") == 0) + chip = IIC0_BOOTPROM_ADDR; + else + chip = IIC0_ALT_BOOTPROM_ADDR; + + do { + printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n"); + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if ((strcmp(console_buffer, "33") != 0) & + (strcmp(console_buffer, "66") != 0)) + nbytes=0; + + strcpy(sysClock, console_buffer); + + } while (nbytes == 0); + + do { + if (strcmp(sysClock, "66") == 0) { + printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n"); + } else { +#ifdef CONFIG_STRESS + printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n"); +#else + printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n"); +#endif + } + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if (strcmp(sysClock, "66") == 0) { + if ((strcmp(console_buffer, "400") != 0) & + (strcmp(console_buffer, "533") != 0) +#ifdef CONFIG_STRESS + & (strcmp(console_buffer, "667") != 0) +#endif + ) { + nbytes = 0; + } + } else { + if ((strcmp(console_buffer, "400") != 0) & + (strcmp(console_buffer, "500") != 0) & + (strcmp(console_buffer, "533") != 0) +#ifdef CONFIG_STRESS + & (strcmp(console_buffer, "667") != 0) +#endif + ) { + nbytes = 0; + } + } + + strcpy(cpuClock, console_buffer); + + } while (nbytes == 0); + + if (strcmp(cpuClock, "500") == 0) + strcpy(plbClock, "166"); + else if (strcmp(cpuClock, "533") == 0) + strcpy(plbClock, "133"); + else { + do { + if (strcmp(cpuClock, "400") == 0) + printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n"); + +#ifdef CONFIG_STRESS + if (strcmp(cpuClock, "667") == 0) + printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n"); + +#endif + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if (strcmp(cpuClock, "400") == 0) { + if ((strcmp(console_buffer, "100") != 0) & + (strcmp(console_buffer, "133") != 0)) + nbytes = 0; + } +#ifdef CONFIG_STRESS + if (strcmp(cpuClock, "667") == 0) { + if ((strcmp(console_buffer, "133") != 0) & + (strcmp(console_buffer, "166") != 0)) + nbytes = 0; + } +#endif + strcpy(plbClock, console_buffer); + + } while (nbytes == 0); + } + + do { + printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n"); + nbytes = readline (" ? "); + + if (strcmp(console_buffer, "quit") == 0) + return 0; + + if ((strcmp(console_buffer, "33") != 0) & + (strcmp(console_buffer, "66") != 0) & + (strcmp(console_buffer, "100") != 0) & + (strcmp(console_buffer, "133") != 0)) { + nbytes = 0; + } + strcpy(pcixClock, console_buffer); + + } while (nbytes == 0); + + printf("\nsys clk = %sMhz\n", sysClock); + printf("cpu clk = %sMhz\n", cpuClock); + printf("plb clk = %sMhz\n", plbClock); + printf("Pci-X clk = %sMhz\n", pcixClock); + + do { + printf("\npress [y] to write I2C bootstrap \n"); + printf("or [n] to abort. \n"); + printf("Don't forget to set board switches \n"); + printf("according to your choice before re-starting \n"); + printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n"); + + nbytes = readline (" ? "); + if (strcmp(console_buffer, "n") == 0) + return 0; + + } while (nbytes == 0); + + if (strcmp(sysClock, "33") == 0) { + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "100") == 0)) + data = 0x8678c206; + + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x8678c2c6; + + if ((strcmp(cpuClock, "500") == 0)) + data = 0x8778f2c6; + + if ((strcmp(cpuClock, "533") == 0)) + data = 0x87790252; + +#ifdef CONFIG_STRESS + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x87794256; + + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "166") == 0)) + data = 0x87794206; + +#endif + } + if (strcmp(sysClock, "66") == 0) { + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "100") == 0)) + data = 0x84706206; + + if ((strcmp(cpuClock, "400") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x847062c6; + + if ((strcmp(cpuClock, "533") == 0)) + data = 0x85708206; + +#ifdef CONFIG_STRESS + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "133") == 0)) + data = 0x8570a256; + + if ((strcmp(cpuClock, "667") == 0) & + (strcmp(plbClock, "166") == 0)) + data = 0x8570a206; + +#endif + } + +#ifdef DEBUG + printf(" pin strap0 to write in i2c = %x\n", data); +#endif /* DEBUG */ + + if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0) + printf("Error writing strap0 in %s\n", argv[2]); + + if (strcmp(pcixClock, "33") == 0) + data = 0x00000701; + + if (strcmp(pcixClock, "66") == 0) + data = 0x00000601; + + if (strcmp(pcixClock, "100") == 0) + data = 0x00000501; + + if (strcmp(pcixClock, "133") == 0) + data = 0x00000401; + + if (strcmp(plbClock, "166") == 0) + data |= 0x05950000; + else + data |= 0x05A50000; + +#ifdef DEBUG + printf(" pin strap1 to write in i2c = %x\n", data); +#endif /* DEBUG */ + + udelay(1000); + if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0) + printf("Error writing strap1 in %s\n", argv[2]); + + return 0; +} + +U_BOOT_CMD( + bootstrap, 3, 1, do_bootstrap, + "bootstrap - program the serial device strap\n", + "wrclk [prom0|prom1] - program the serial device strap\n" + ); diff --git a/board/amcc/katmai/config.mk b/board/amcc/katmai/config.mk new file mode 100644 index 0000000000..115c1aed05 --- /dev/null +++ b/board/amcc/katmai/config.mk @@ -0,0 +1,38 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# AMCC 440SPe Evaluation (Katmai) board +# + +TEXT_BASE = 0xfffc0000 + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/amcc/katmai/init.S b/board/amcc/katmai/init.S new file mode 100644 index 0000000000..f5900bcb7b --- /dev/null +++ b/board/amcc/katmai/init.S @@ -0,0 +1,108 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + + .section .bootpg,"ax" + +/************************************************************************** + * TLB table for revA + *************************************************************************/ + .globl tlbtabA +tlbtabA: + tlbtab_start + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR(2) detection + * routine. + */ + + tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) + tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE_BASE, SZ_16K, 0x20000000, 0xC, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x40000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x80000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0xC0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x50000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x90000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0xD0000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbtab_end + +/************************************************************************** + * TLB table for revB + * + * Notice: revB of the 440SPe chip is very strict about PLB real addresses + * and ranges to be mapped for config space: it seems to only work with + * d_nnnn_nnnn range (hangs the core upon config transaction attempts when + * set otherwise) while revA uses c_nnnn_nnnn. + *************************************************************************/ + .globl tlbtabB +tlbtabB: + tlbtab_start + tlbentry(0xff000000, SZ_16M, 0xff000000, 4, AC_R|AC_W|AC_X|SA_G) + + /* + * TLB entries for SDRAM are not needed on this platform. + * They are dynamically generated in the SPD DDR(2) detection + * routine. + */ + + tlbentry(CFG_ISRAM_BASE, SZ_256K, 0x00000000, 4, AC_R|AC_W|AC_X|SA_I) + + tlbentry(CFG_PERIPHERAL_BASE, SZ_4K, 0xF0000000, 4, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_ACE_BASE, SZ_1K, 0xE0000000, 4,AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_PCI_BASE, SZ_256M, 0x00000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCI_MEMBASE, SZ_256M, 0x10000000, 0xC, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE_MEMBASE, SZ_256M, 0xB0000000, 0xD, AC_R|AC_W|SA_G|SA_I) + + tlbentry(CFG_PCIE0_CFGBASE, SZ_1K, 0x00100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_CFGBASE, SZ_1K, 0x20100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_CFGBASE, SZ_1K, 0x40100000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE0_XCFGBASE, SZ_1K, 0x10000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE1_XCFGBASE, SZ_1K, 0x30000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbentry(CFG_PCIE2_XCFGBASE, SZ_1K, 0x50000000, 0xD, AC_R|AC_W|SA_G|SA_I) + tlbtab_end diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c new file mode 100644 index 0000000000..8704925a9c --- /dev/null +++ b/board/amcc/katmai/katmai.c @@ -0,0 +1,514 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include +#include +#include +#include +#include + +#include "katmai.h" +#include "../cpu/ppc4xx/440spe_pcie.h" + +#undef PCIE_ENDPOINT +/* #define PCIE_ENDPOINT 1 */ + +int ppc440spe_init_pcie_rootport(int port); +void ppc440spe_setup_pcie(struct pci_controller *hose, int port); + +int board_early_init_f (void) +{ + unsigned long mfr; + unsigned long pfc; + + /*----------------------------------------------------------------------+ + * Interrupt controller setup for the Katmai 440SPe Evaluation board. + *-----------------------------------------------------------------------+ + *-----------------------------------------------------------------------+ + * Interrupt | Source | Pol. | Sensi.| Crit. | + *-----------+-----------------------------------+-------+-------+-------+ + * IRQ 00 | UART0 | High | Level | Non | + * IRQ 01 | UART1 | High | Level | Non | + * IRQ 02 | IIC0 | High | Level | Non | + * IRQ 03 | IIC1 | High | Level | Non | + * IRQ 04 | PCI0X0 MSG IN | High | Level | Non | + * IRQ 05 | PCI0X0 CMD Write | High | Level | Non | + * IRQ 06 | PCI0X0 Power Mgt | High | Level | Non | + * IRQ 07 | PCI0X0 VPD Access | Rising| Edge | Non | + * IRQ 08 | PCI0X0 MSI level 0 | High | Lvl/ed| Non | + * IRQ 09 | External IRQ 15 - (PCI-Express) | pgm H | Pgm | Non | + * IRQ 10 | UIC2 Non-critical Int. | NA | NA | Non | + * IRQ 11 | UIC2 Critical Interrupt | NA | NA | Crit | + * IRQ 12 | PCI Express MSI Level 0 | Rising| Edge | Non | + * IRQ 13 | PCI Express MSI Level 1 | Rising| Edge | Non | + * IRQ 14 | PCI Express MSI Level 2 | Rising| Edge | Non | + * IRQ 15 | PCI Express MSI Level 3 | Rising| Edge | Non | + * IRQ 16 | UIC3 Non-critical Int. | NA | NA | Non | + * IRQ 17 | UIC3 Critical Interrupt | NA | NA | Crit | + * IRQ 18 | External IRQ 14 - (PCI-Express) | Pgm | Pgm | Non | + * IRQ 19 | DMA Channel 0 FIFO Full | High | Level | Non | + * IRQ 20 | DMA Channel 0 Stat FIFO | High | Level | Non | + * IRQ 21 | DMA Channel 1 FIFO Full | High | Level | Non | + * IRQ 22 | DMA Channel 1 Stat FIFO | High | Level | Non | + * IRQ 23 | I2O Inbound Doorbell | High | Level | Non | + * IRQ 24 | Inbound Post List FIFO Not Empt | High | Level | Non | + * IRQ 25 | I2O Region 0 LL PLB Write | High | Level | Non | + * IRQ 26 | I2O Region 1 LL PLB Write | High | Level | Non | + * IRQ 27 | I2O Region 0 HB PLB Write | High | Level | Non | + * IRQ 28 | I2O Region 1 HB PLB Write | High | Level | Non | + * IRQ 29 | GPT Down Count Timer | Rising| Edge | Non | + * IRQ 30 | UIC1 Non-critical Int. | NA | NA | Non | + * IRQ 31 | UIC1 Critical Interrupt | NA | NA | Crit. | + *------------------------------------------------------------------------ + * IRQ 32 | Ext. IRQ 13 - (PCI-Express) |pgm (H)|pgm/Lvl| Non | + * IRQ 33 | MAL Serr | High | Level | Non | + * IRQ 34 | MAL Txde | High | Level | Non | + * IRQ 35 | MAL Rxde | High | Level | Non | + * IRQ 36 | DMC CE or DMC UE | High | Level | Non | + * IRQ 37 | EBC or UART2 | High |Lvl Edg| Non | + * IRQ 38 | MAL TX EOB | High | Level | Non | + * IRQ 39 | MAL RX EOB | High | Level | Non | + * IRQ 40 | PCIX0 MSI Level 1 | High |Lvl Edg| Non | + * IRQ 41 | PCIX0 MSI level 2 | High |Lvl Edg| Non | + * IRQ 42 | PCIX0 MSI level 3 | High |Lvl Edg| Non | + * IRQ 43 | L2 Cache | Risin | Edge | Non | + * IRQ 44 | GPT Compare Timer 0 | Risin | Edge | Non | + * IRQ 45 | GPT Compare Timer 1 | Risin | Edge | Non | + * IRQ 46 | GPT Compare Timer 2 | Risin | Edge | Non | + * IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | + * IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | + * IRQ 49 | Ext. IRQ 12 - PCI-X |pgm/Fal|pgm/Lvl| Non | + * IRQ 50 | Ext. IRQ 11 - |pgm (H)|pgm/Lvl| Non | + * IRQ 51 | Ext. IRQ 10 - |pgm (H)|pgm/Lvl| Non | + * IRQ 52 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | + * IRQ 53 | Ext. IRQ 8 |pgm (H)|pgm/Lvl| Non | + * IRQ 54 | DMA Error | High | Level | Non | + * IRQ 55 | DMA I2O Error | High | Level | Non | + * IRQ 56 | Serial ROM | High | Level | Non | + * IRQ 57 | PCIX0 Error | High | Edge | Non | + * IRQ 58 | Ext. IRQ 7- |pgm (H)|pgm/Lvl| Non | + * IRQ 59 | Ext. IRQ 6- |pgm (H)|pgm/Lvl| Non | + * IRQ 60 | EMAC0 Interrupt | High | Level | Non | + * IRQ 61 | EMAC0 Wake-up | High | Level | Non | + * IRQ 62 | Reserved | High | Level | Non | + * IRQ 63 | XOR | High | Level | Non | + *----------------------------------------------------------------------- + * IRQ 64 | PE0 AL | High | Level | Non | + * IRQ 65 | PE0 VPD Access | Risin | Edge | Non | + * IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | + * IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | + * IRQ 68 | PE0 TCR | High | Level | Non | + * IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | + * IRQ 70 | PE0 DCR Error | High | Level | Non | + * IRQ 71 | Reserved | N/A | N/A | Non | + * IRQ 72 | PE1 AL | High | Level | Non | + * IRQ 73 | PE1 VPD Access | Risin | Edge | Non | + * IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | + * IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | + * IRQ 76 | PE1 TCR | High | Level | Non | + * IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | + * IRQ 78 | PE1 DCR Error | High | Level | Non | + * IRQ 79 | Reserved | N/A | N/A | Non | + * IRQ 80 | PE2 AL | High | Level | Non | + * IRQ 81 | PE2 VPD Access | Risin | Edge | Non | + * IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | + * IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | + * IRQ 84 | PE2 TCR | High | Level | Non | + * IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | + * IRQ 86 | PE2 DCR Error | High | Level | Non | + * IRQ 87 | Reserved | N/A | N/A | Non | + * IRQ 88 | External IRQ(5) | Progr | Progr | Non | + * IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | + * IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | + * IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | + * IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | + * IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | + * IRQ 94 | Reserved | N/A | N/A | Non | + * IRQ 95 | Reserved | N/A | N/A | Non | + *----------------------------------------------------------------------- + * IRQ 96 | PE0 INTA | High | Level | Non | + * IRQ 97 | PE0 INTB | High | Level | Non | + * IRQ 98 | PE0 INTC | High | Level | Non | + * IRQ 99 | PE0 INTD | High | Level | Non | + * IRQ 100 | PE1 INTA | High | Level | Non | + * IRQ 101 | PE1 INTB | High | Level | Non | + * IRQ 102 | PE1 INTC | High | Level | Non | + * IRQ 103 | PE1 INTD | High | Level | Non | + * IRQ 104 | PE2 INTA | High | Level | Non | + * IRQ 105 | PE2 INTB | High | Level | Non | + * IRQ 106 | PE2 INTC | High | Level | Non | + * IRQ 107 | PE2 INTD | Risin | Edge | Non | + * IRQ 108 | PCI Express MSI Level 4 | Risin | Edge | Non | + * IRQ 109 | PCI Express MSI Level 5 | Risin | Edge | Non | + * IRQ 110 | PCI Express MSI Level 6 | Risin | Edge | Non | + * IRQ 111 | PCI Express MSI Level 7 | Risin | Edge | Non | + * IRQ 116 | PCI Express MSI Level 12 | Risin | Edge | Non | + * IRQ 112 | PCI Express MSI Level 8 | Risin | Edge | Non | + * IRQ 113 | PCI Express MSI Level 9 | Risin | Edge | Non | + * IRQ 114 | PCI Express MSI Level 10 | Risin | Edge | Non | + * IRQ 115 | PCI Express MSI Level 11 | Risin | Edge | Non | + * IRQ 117 | PCI Express MSI Level 13 | Risin | Edge | Non | + * IRQ 118 | PCI Express MSI Level 14 | Risin | Edge | Non | + * IRQ 119 | PCI Express MSI Level 15 | Risin | Edge | Non | + * IRQ 120 | PCI Express MSI Level 16 | Risin | Edge | Non | + * IRQ 121 | PCI Express MSI Level 17 | Risin | Edge | Non | + * IRQ 122 | PCI Express MSI Level 18 | Risin | Edge | Non | + * IRQ 123 | PCI Express MSI Level 19 | Risin | Edge | Non | + * IRQ 124 | PCI Express MSI Level 20 | Risin | Edge | Non | + * IRQ 125 | PCI Express MSI Level 21 | Risin | Edge | Non | + * IRQ 126 | PCI Express MSI Level 22 | Risin | Edge | Non | + * IRQ 127 | PCI Express MSI Level 23 | Risin | Edge | Non | + *-----------+-----------------------------------+-------+-------+-------+ */ + /*-------------------------------------------------------------------------+ + * Put UICs in PowerPC440SPemode. + * Initialise UIC registers. Clear all interrupts. Disable all interrupts. + * Set critical interrupt values. Set interrupt polarities. Set interrupt + * trigger levels. Make bit 0 High priority. Clear all interrupts again. + *------------------------------------------------------------------------*/ + mtdcr (uic3sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic3er, 0x00000000); /* disable all interrupts */ + mtdcr (uic3cr, 0x00000000); /* Set Critical / Non Critical interrupts: */ + mtdcr (uic3pr, 0xffffffff); /* Set Interrupt Polarities*/ + mtdcr (uic3tr, 0x001fffff); /* Set Interrupt Trigger Levels */ + mtdcr (uic3vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic3sr, 0x00000000); /* clear all interrupts*/ + mtdcr (uic3sr, 0xffffffff); /* clear all interrupts*/ + + + mtdcr (uic2sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic2er, 0x00000000); /* disable all interrupts*/ + mtdcr (uic2cr, 0x00000000); /* Set Critical / Non Critical interrupts*/ + mtdcr (uic2pr, 0xebebebff); /* Set Interrupt Polarities*/ + mtdcr (uic2tr, 0x74747400); /* Set Interrupt Trigger Levels */ + mtdcr (uic2vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic2sr, 0x00000000); /* clear all interrupts */ + mtdcr (uic2sr, 0xffffffff); /* clear all interrupts */ + + mtdcr (uic1sr, 0xffffffff); /* Clear all interrupts*/ + mtdcr (uic1er, 0x00000000); /* disable all interrupts*/ + mtdcr (uic1cr, 0x00000000); /* Set Critical / Non Critical interrupts*/ + mtdcr (uic1pr, 0xffffffff); /* Set Interrupt Polarities */ + mtdcr (uic1tr, 0x001f8040); /* Set Interrupt Trigger Levels*/ + mtdcr (uic1vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic1sr, 0x00000000); /* clear all interrupts*/ + mtdcr (uic1sr, 0xffffffff); /* clear all interrupts*/ + + mtdcr (uic0sr, 0xffffffff); /* Clear all interrupts */ + mtdcr (uic0er, 0x00000000); /* disable all interrupts excepted cascade to be checked */ + mtdcr (uic0cr, 0x00104001); /* Set Critical / Non Critical interrupts*/ + mtdcr (uic0pr, 0xffffffff); /* Set Interrupt Polarities*/ + mtdcr (uic0tr, 0x010f0004); /* Set Interrupt Trigger Levels */ + mtdcr (uic0vr, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr (uic0sr, 0x00000000); /* clear all interrupts*/ + mtdcr (uic0sr, 0xffffffff); /* clear all interrupts*/ + +/* SDR0_MFR should be part of Ethernet init */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ECS_MASK; +/* mtsdr(sdr_mfr, mfr); */ + + /* + * Setup GPIO signalling per defines in katmai.h + */ + pfc = PFC0_KATMAI; + mtsdr(SDR0_PFC0, pfc); + + out32(GPIO0_OR_ADDR, GPIO_OR_KATMAI); + out32(GPIO0_ODR_ADDR, GPIO_ODR_KATMAI); + out32(GPIO0_TCR_ADDR, GPIO_TCR_KATMAI); + + return 0; +} + +int checkboard (void) +{ + char *s = getenv("serial#"); + + printf("Board: Katmai - AMCC 440SPe Evaluation Board"); + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + + return 0; +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*-------------------------------------------------------------------+ + * The katmai board is always configured as the host & requires the + * PCI arbiter to be enabled. + *-------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*-------------------------------------------------------------------+ + * Disable everything + *-------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*-------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 + * strapping options to not support sizes such as 128/256 MB. + *-------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIX0_BAR0, 0 ); + + /*-------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *-------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +#if defined(CONFIG_PCI) +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +int is_pci_host(struct pci_controller *hose) +{ + /* The katmai board is always configured as host. */ + return 1; +} + +static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; + +void pcie_setup_hoses(void) +{ + struct pci_controller *hose; + int i, bus; + + /* + * assume we're called after the PCIX hose is initialized, which takes + * bus ID 0 and therefore start numbering PCIe's from 1. + */ + bus = 1; + for (i = 0; i <= 2; i++) { +#ifdef PCIE_ENDPOINT + if (ppc440spe_init_pcie_endport(i)) { +#else + if (ppc440spe_init_pcie_rootport(i)) { +#endif + printf("PCIE%d: initialization failed\n", i); + continue; + } + + hose = &pcie_hose[i]; + hose->first_busno = bus; + hose->last_busno = bus; + bus++; + + /* setup mem resource */ + pci_set_region(hose->regions + 0, + CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, + CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE, + CFG_PCIE_MEMSIZE, + PCI_REGION_MEM + ); + hose->region_count = 1; + pci_register_hose(hose); + +#ifdef PCIE_ENDPOINT + ppc440spe_setup_pcie_endpoint(hose, i); + /* + * Reson for no scanning is endpoint can not generate + * upstream configuration accesses. + */ +#else + ppc440spe_setup_pcie_rootpoint(hose, i); + /* + * Config access can only go down stream + */ + hose->last_busno = pci_hose_scan(hose); +#endif + } +} +#endif /* defined(CONFIG_PCI) */ + +int misc_init_f (void) +{ + uint reg; +#if defined(CONFIG_STRESS) + uint i ; + uint disp; +#endif + + /* minimal init for PCIe */ +#if 0 /* test-only: test endpoint at some time, for now rootpoint only */ + /* pci express 0 Endpoint Mode */ + mfsdr(SDR0_PE0DLPSET, reg); + reg &= (~0x00400000); + mtsdr(SDR0_PE0DLPSET, reg); +#else + /* pci express 0 Rootpoint Mode */ + mfsdr(SDR0_PE0DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE0DLPSET, reg); +#endif + /* pci express 1 Rootpoint Mode */ + mfsdr(SDR0_PE1DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE1DLPSET, reg); + /* pci express 2 Rootpoint Mode */ + mfsdr(SDR0_PE2DLPSET, reg); + reg |= 0x00400000; + mtsdr(SDR0_PE2DLPSET, reg); + +#if defined(CONFIG_STRESS) + /* + * All this setting done by linux only needed by stress an charac. test + * procedure + * PCIe 1 Rootpoint PCIe2 Endpoint + * PCIe 0 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level + */ + for (i=0,disp=0; i<8; i++,disp+=3) { + mfsdr(SDR0_PE0HSSSET1L0+disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE0HSSSET1L0+disp, reg); + } + + /*PCIe 1 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */ + for (i=0,disp=0; i<4; i++,disp+=3) { + mfsdr(SDR0_PE1HSSSET1L0+disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE1HSSSET1L0+disp, reg); + } + + /*PCIE 2 FIR Pre-emphasis Filter Coefficients & Transmit Driver Power Level */ + for (i=0,disp=0; i<4; i++,disp+=3) { + mfsdr(SDR0_PE2HSSSET1L0+disp, reg); + reg |= 0x33000000; + mtsdr(SDR0_PE2HSSSET1L0+disp, reg); + } + + reg = 0x21242222; + mtsdr(SDR0_PE2UTLSET1, reg); + reg = 0x11000000; + mtsdr(SDR0_PE2UTLSET2, reg); + /* pci express 1 Endpoint Mode */ + reg = 0x00004000; + mtsdr(SDR0_PE2DLPSET, reg); + + mtsdr(SDR0_UART1, 0x2080005a); /* patch for TG */ +#endif + + return 0; +} + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return (ctrlc()); +} +#endif diff --git a/board/amcc/katmai/katmai.h b/board/amcc/katmai/katmai.h new file mode 100644 index 0000000000..9d5b793f13 --- /dev/null +++ b/board/amcc/katmai/katmai.h @@ -0,0 +1,65 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __KATMAI_H_ +#define __KATMAI_H_ + +/*---------------------------------------------------------------------------- + * XX + * XXXX XX XXX XXX XXXX + * XX XX XX XX XX XX + * XX XXX XX XX XX XX XX + * XX XX XXXXX XX XX XX + * XXXX XX XXXX XXXX + * XXXX + * + * The 440SPe provices 32 bits of GPIO. By default all GPIO pins + * are disabled, and must be explicitly enabled by setting a + * bit in the SDR0_PFC0 indirect DCR. Each GPIO maps 1-to-1 with the + * corresponding bit in the SDR0_PFC0 register (note that bit numbers + * reflect the PowerPC convention where bit 0 is the most-significant + * bit). + * + * Katmai specific: + * RS232_RX_EN# is held HIGH during reset by hardware, keeping the + * RS232_CTS, DSR & DCD signals coming from the MAX3411 (U26) in + * Hi-Z condition. This prevents contention between the MAX3411 (U26) + * and 74CBTLV3125PG (U2) during reset. + * + * RS232_RX_EN# is connected as GPIO pin 30. Once the processor + * is released from reset, this pin must be configured as an output and + * then driven high to enable the receive signals from the UART transciever. + *----------------------------------------------------------------------------*/ +#define GPIO_ENABLE(gpio) (0x80000000 >> (gpio)) + +#define PFC0_KATMAI GPIO_ENABLE(30) +#define GPIO_OR_KATMAI GPIO_ENABLE(30) /* Drive all outputs low except GPIO 30 */ +#define GPIO_TCR_KATMAI GPIO_ENABLE(30) +#define GPIO_ODR_KATMAI 0 /* Disable open drain for all outputs */ + +#define GPIO0_OR_ADDR (CFG_PERIPHERAL_BASE + 0x700) +#define GPIO0_TCR_ADDR (CFG_PERIPHERAL_BASE + 0x704) +#define GPIO0_ODR_ADDR (CFG_PERIPHERAL_BASE + 0x718) +#define GPIO0_IR_ADDR (CFG_PERIPHERAL_BASE + 0x71C) + +#endif /* __KATMAI_H_ */ diff --git a/board/amcc/katmai/u-boot.lds b/board/amcc/katmai/u-boot.lds new file mode 100644 index 0000000000..9fe661e246 --- /dev/null +++ b/board/amcc/katmai/u-boot.lds @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/amcc/katmai/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index ae24591087..82ae4434b0 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -314,7 +314,7 @@ cpu_init_f (void) #endif #if defined (CFG_EBC_CFG) - mtebc(epcr, CFG_EBC_CFG); + mtebc(EBC0_CFG, CFG_EBC_CFG); #endif #if defined(CONFIG_WATCHDOG) diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index 2d16a83420..06220c3439 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -331,7 +331,7 @@ void get_sys_info (sys_info_t * sysInfo) unsigned long m; unsigned long prbdv0; -#if defined(CONFIG_440SPE) +#if defined(CONFIG_YUCCA) unsigned long sys_freq; unsigned long sys_per=0; unsigned long msr; @@ -348,7 +348,7 @@ void get_sys_info (sys_info_t * sysInfo) /*-------------------------------------------------------------------------+ | Calculate the system clock speed from the period. +-------------------------------------------------------------------------*/ - sys_freq=(ONE_BILLION/sys_per)*1000; + sys_freq = (ONE_BILLION / sys_per) * 1000; #endif /* Extract configured divisors */ @@ -385,17 +385,17 @@ void get_sys_info (sys_info_t * sysInfo) m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB; /* Now calculate the individual clocks */ -#if defined(CONFIG_440SPE) +#if defined(CONFIG_YUCCA) sysInfo->freqVCOMhz = (m * sys_freq) ; #else - sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1); + sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1); #endif sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA; sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0; sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv; sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv; -#if defined(CONFIG_440SPE) +#if defined(CONFIG_YUCCA) /* Determine PCI Clock Period */ pci_clock_per = determine_pci_clock_per(); sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000; @@ -408,7 +408,7 @@ void get_sys_info (sys_info_t * sysInfo) #endif -#if defined(CONFIG_440SPE) +#if defined(CONFIG_YUCCA) unsigned long determine_sysper(void) { unsigned int fpga_clocking_reg; @@ -583,7 +583,6 @@ unsigned long determine_sysper(void) } return(sys_per); - } /*-------------------------------------------------------------------------+ diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 8e000d3092..a3db93ffbb 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1856,3 +1856,60 @@ pll_wait: /* execution will continue from the poweron */ /* vector of 0xfffffffc */ #endif /* CONFIG_405EP */ + +#if defined(CONFIG_440) +#define function_prolog(func_name) .text; \ + .align 2; \ + .globl func_name; \ + func_name: +#define function_epilog(func_name) .type func_name,@function; \ + .size func_name,.-func_name + +/*----------------------------------------------------------------------------+ +| mttlb3. ++----------------------------------------------------------------------------*/ + function_prolog(mttlb3) + TLBWE(4,3,2) + blr + function_epilog(mttlb3) + +/*----------------------------------------------------------------------------+ +| mftlb3. ++----------------------------------------------------------------------------*/ + function_prolog(mftlb3) + TLBRE(3,3,2) + blr + function_epilog(mftlb3) + +/*----------------------------------------------------------------------------+ +| mttlb2. ++----------------------------------------------------------------------------*/ + function_prolog(mttlb2) + TLBWE(4,3,1) + blr + function_epilog(mttlb2) + +/*----------------------------------------------------------------------------+ +| mftlb2. ++----------------------------------------------------------------------------*/ + function_prolog(mftlb2) + TLBRE(3,3,1) + blr + function_epilog(mftlb2) + +/*----------------------------------------------------------------------------+ +| mttlb1. ++----------------------------------------------------------------------------*/ + function_prolog(mttlb1) + TLBWE(4,3,0) + blr + function_epilog(mttlb1) + +/*----------------------------------------------------------------------------+ +| mftlb1. ++----------------------------------------------------------------------------*/ + function_prolog(mftlb1) + TLBRE(3,3,0) + blr + function_epilog(mftlb1) +#endif /* CONFIG_440 */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h new file mode 100644 index 0000000000..c750e14656 --- /dev/null +++ b/include/configs/katmai.h @@ -0,0 +1,415 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2004 Paul Reynolds + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * katmai.h - configuration for AMCC Katmai (440SPe) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_KATMAI 1 /* Board is Katmai */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_440 1 /* ... PPC440 family */ +#define CONFIG_440SPE 1 /* Specifc SPe support */ +#undef CFG_DRAM_TEST /* Disable-takes long time */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ +#define CONFIG_ADD_RAM_INFO 1 /* Print additional info */ +#undef CONFIG_SHOW_BOOT_PROGRESS + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc */ + +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xff000000 /* start of FLASH */ +#define CFG_MONITOR_BASE TEXT_BASE +#define CFG_PERIPHERAL_BASE 0xa0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0x90000000 /* internal SRAM */ + +#define CFG_PCI_MEMBASE 0x80000000 /* mapped PCI memory */ +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CFG_PCI_TARGBASE CFG_PCI_MEMBASE + +#define CFG_PCIE_MEMBASE 0xb0000000 /* mapped PCIe memory */ +#define CFG_PCIE_MEMSIZE 0x01000000 +#define CFG_PCIE_BASE 0xe0000000 /* PCIe UTL regs */ + +#define CFG_PCIE0_CFGBASE 0xc0000000 +#define CFG_PCIE0_XCFGBASE 0xc0000400 +#define CFG_PCIE1_CFGBASE 0xc0001000 +#define CFG_PCIE1_XCFGBASE 0xc0001400 +#define CFG_PCIE2_CFGBASE 0xc0002000 +#define CFG_PCIE2_XCFGBASE 0xc0002400 + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024) + +#define CFG_ACE_BASE 0xe0000000 /* Xilinx ACE controller - Compact Flash */ + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_SERIAL_MULTI 1 +#undef CONFIG_UART1_CONSOLE +#undef CFG_EXT_SERIAL_CLOCK +#define CONFIG_BAUDRATE 115200 +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */ +#define SPD_EEPROM_ADDRESS {0x51, 0x52} /* SPD i2c spd addresses */ +#define IIC0_DIMM0_ADDR 0x51 +#define IIC0_DIMM1_ADDR 0x52 +#undef CONFIG_STRESS +#undef ENABLE_ECC + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CFG_SPD_BUS_NUM 0 /* The I2C bus for SPD */ + +#define IIC0_BOOTPROM_ADDR 0x50 +#define IIC0_ALT_BOOTPROM_ADDR 0x54 + +#define CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR (0x50) +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CFG_RTC_BUS_NUM 1 /* The I2C bus for RTC */ +#define CFG_I2C_RTC_ADDR 0x68 +#define CFG_M41T11_BASE_YEAR 1900 /* play along with linux */ + +/* I2C DTT */ +#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */ +#define CFG_DTT_BUS_NUM 1 /* The I2C bus for DTT */ +/* + * standard dtt sensor configuration - bottom bit will determine local or + * remote sensor of the ADM1021, the rest determines index into + * CFG_DTT_ADM1021 array below. + */ +#define CONFIG_DTT_SENSORS { 0, 1 } + +/* + * ADM1021 temp sensor configuration (see dtt/adm1021.c for details). + * there will be one entry in this array for each two (dummy) sensors in + * CONFIG_DTT_SENSORS. + * + * For Katmai board: + * - only one ADM1021 + * - i2c addr 0x18 + * - conversion rate 0x02 = 0.25 conversions/second + * - ALERT ouput disabled + * - local temp sensor enabled, min set to 0 deg, max set to 85 deg + * - remote temp sensor enabled, min set to 0 deg, max set to 85 deg + */ +#define CFG_DTT_ADM1021 { { 0x18, 0x02, 0, 1, 0, 85, 1, 0, 58} } + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* Environment uses flash */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=katmai\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=katmai/uImage\0" \ + "kernel_addr=fff10000\0" \ + "ramdisk_addr=fff20000\0" \ + "initrd_high=30000000\0" \ + "load=tftp 200000 katmai/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b ${fileaddr} fffc0000 ${filesize};" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "kozio=bootm ffc60000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_EEPROM | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_DTT | \ + CFG_CMD_ELF | \ + CFG_CMD_EXT2 | \ + CFG_CMD_FAT | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO | \ + CFG_CMD_SDRAM) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include + +#define CONFIG_IBM_EMAC4_V4 1 /* 440SPe has this EMAC version */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */ +#define CONFIG_HAS_ETH0 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CONFIG_CIS8201_PHY 1 /* Enable 'special' RGMII mode for Cicada phy */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ +#define CONFIG_NET_MULTI /* needed for NetConsole */ + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +#define CFG_4xx_RESET_TYPE 0x2 /* use chip reset on this board */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#undef CONFIG_PCI_CONFIG_HOST_BRIDGE + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT 1 /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#undef CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ +/* #define CFG_PCI_SUBSYS_ID CFG_PCI_SUBSYS_DEVICEID */ + +/* + * NETWORK Support (PCI): + */ +/* Support for Intel 82557/82559/82559ER chips. */ +#define CONFIG_EEPRO100 + +/*----------------------------------------------------------------------- + * Xilinx System ACE support + *----------------------------------------------------------------------*/ +#define CONFIG_SYSTEMACE 1 /* Enable SystemACE support */ +#define CFG_SYSTEMACE_WIDTH 16 /* Data bus width is 16 */ +#define CFG_SYSTEMACE_BASE CFG_ACE_BASE +#define CONFIG_DOS_PARTITION 1 + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ + +/* Memory Bank 0 (Flash) initialization */ +#define CFG_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(7) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(0) | \ + EBC_BXAP_WBF_ENCODE(0) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_DELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CFG_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | \ + EBC_BXCR_BS_16MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* Memory Bank 1 (Xilinx System ACE controller) initialization */ +#define CFG_EBC_PB1AP 0x7F8FFE80 +#define CFG_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CFG_ACE_BASE) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/*------------------------------------------------------------------------- + * Initialize EBC CONFIG - + * Keep the Default value, but the bit PDT which has to be set to 1 ?TBC + * default value : 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000 + *-------------------------------------------------------------------------*/ +#define CFG_EBC_CFG (EBC_CFG_LE_UNLOCK | \ + EBC_CFG_PTD_ENABLE | \ + EBC_CFG_RTC_16PERCLK | \ + EBC_CFG_ATC_PREVIOUS | \ + EBC_CFG_DTC_PREVIOUS | \ + EBC_CFG_CTC_PREVIOUS | \ + EBC_CFG_OEO_PREVIOUS | \ + EBC_CFG_EMC_DEFAULT | \ + EBC_CFG_PME_DISABLE | \ + EBC_CFG_PR_16) + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /*Initial Memory map for Linux*/ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/ppc405.h b/include/ppc405.h index e475fa54cd..a49912cabb 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -240,6 +240,7 @@ #define pbesr0 0x21 /* periph bus error status reg 0 */ #define pbesr1 0x22 /* periph bus error status reg 1 */ #define epcr 0x23 /* external periph control reg */ +#define EBC0_CFG 0x23 /* external bus configuration reg */ #ifdef CONFIG_405EP /****************************************************************************** diff --git a/include/ppc440.h b/include/ppc440.h index 91cff414af..c24f5b7ab1 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -533,9 +533,12 @@ #define SDRAM_MCSTAT_MIC_MASK 0x80000000 /* Memory init status mask */ #define SDRAM_MCSTAT_MIC_NOTCOMP 0x00000000 /* Mem init not complete */ #define SDRAM_MCSTAT_MIC_COMP 0x80000000 /* Mem init complete */ -#define SDRAM_MCSTAT_SRMS_MASK 0x80000000 /* Mem self refresh stat mask */ +#define SDRAM_MCSTAT_SRMS_MASK 0x40000000 /* Mem self refresh stat mask */ #define SDRAM_MCSTAT_SRMS_NOT_SF 0x00000000 /* Mem not in self refresh */ -#define SDRAM_MCSTAT_SRMS_SF 0x80000000 /* Mem in self refresh */ +#define SDRAM_MCSTAT_SRMS_SF 0x40000000 /* Mem in self refresh */ +#define SDRAM_MCSTAT_IDLE_MASK 0x20000000 /* Mem self refresh stat mask */ +#define SDRAM_MCSTAT_IDLE_NOT 0x00000000 /* Mem contr not idle */ +#define SDRAM_MCSTAT_IDLE 0x20000000 /* Mem contr idle */ /*-----------------------------------------------------------------------------+ | Memory Controller Options 1 @@ -730,6 +733,7 @@ #define SDRAM_WRDTR_LLWP_1_CYC 0x00000000 #define SDRAM_WRDTR_WTR_MASK 0x0E000000 #define SDRAM_WRDTR_WTR_0_DEG 0x06000000 +#define SDRAM_WRDTR_WTR_90_DEG_ADV 0x04000000 #define SDRAM_WRDTR_WTR_180_DEG_ADV 0x02000000 #define SDRAM_WRDTR_WTR_270_DEG_ADV 0x00000000 @@ -847,6 +851,7 @@ #define pbear 0x20 /* periph bus error addr reg */ #define pbesr 0x21 /* periph bus error status reg */ #define xbcfg 0x23 /* external bus configuration reg */ +#define EBC0_CFG 0x23 /* external bus configuration reg */ #define xbcid 0x24 /* external bus core id reg */ #if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ From 874bb7b88fe9b4648e1288a387af2e31014a72f3 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 13:15:40 +0100 Subject: [PATCH 20/30] [PATCH] Clean up Katmai (440SPe) linker script Signed-off-by: Stefan Roese --- board/amcc/katmai/u-boot.lds | 16 ---------------- 1 file changed, 16 deletions(-) diff --git a/board/amcc/katmai/u-boot.lds b/board/amcc/katmai/u-boot.lds index 9fe661e246..bf8fc5d3da 100644 --- a/board/amcc/katmai/u-boot.lds +++ b/board/amcc/katmai/u-boot.lds @@ -63,24 +63,8 @@ SECTIONS .plt : { *(.plt) } .text : { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - cpu/ppc4xx/start.o (.text) board/amcc/katmai/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/serial.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/environment.o(.text)*/ *(.text) *(.fixup) From d93e2212f962668b3dce091ff5edc33f2347fe37 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 13:17:42 +0100 Subject: [PATCH 21/30] [PATCH] Update SystemACE driver for 16bit access This patch removes some problems when the Xilinx SystemACE driver is used with 16bit access on an big endian platform (like the AMCC Katmai). Signed-off-by: Stefan Roese --- drivers/systemace.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/systemace.c b/drivers/systemace.c index 9502623a74..3bd2ea999c 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -66,8 +66,8 @@ writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);} #endif #else -#define ace_readw(off) (readw(CFG_SYSTEMACE_BASE+off)) -#define ace_writew(val, off) (writew(val, CFG_SYSTEMACE_BASE+off)) +#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off)) +#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val)) #endif /* */ @@ -119,6 +119,14 @@ block_dev_desc_t *systemace_get_dev(int dev) systemace_dev.removable = 1; systemace_dev.block_read = systemace_read; +#if (CFG_SYSTEMACE_WIDTH == 16) + /* + * By default the SystemACE comes up in 8-bit mode. + * Ensure that 16-bit mode gets enabled. + */ + ace_writew(0x0001, 0); +#endif + init_part(&systemace_dev); } @@ -197,7 +205,7 @@ static unsigned long systemace_read(int dev, unsigned long start, #endif /* Write LBA block address */ ace_writew((start >> 0) & 0xffff, 0x10); - ace_writew((start >> 16) & 0x00ff, 0x12); + ace_writew((start >> 16) & 0x0fff, 0x12); /* NOTE: in the Write Sector count below, a count of 0 causes a transfer of 256, so &0xff gives the right From 751bb57107d78978ae08e697c3deba816f5be091 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Feb 2007 13:21:57 +0100 Subject: [PATCH 22/30] [PATCH] Fix relocation problem with "new" get_dev() function This patch enables the "new" get_dev() function for block devices introduced by Grant Likely to be used on systems that still suffer from the relocation problems (manual relocation neede because of problems with linker script). Hopefully we can resolve this relocation issue soon for all platform so we don't need this additional code anymore. Signed-off-by: Stefan Roese --- disk/part.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/disk/part.c b/disk/part.c index f1026c5ef2..37bba77dd3 100644 --- a/disk/part.c +++ b/disk/part.c @@ -64,13 +64,25 @@ static const struct block_drvr block_drvr[] = { { }, }; +#ifndef CFG_FIXUP_RELOCATION +DECLARE_GLOBAL_DATA_PTR; +#endif + block_dev_desc_t *get_dev(char* ifname, int dev) { const struct block_drvr *drvr = block_drvr; while (drvr->name) { +#ifndef CFG_FIXUP_RELOCATION + block_dev_desc_t* (*reloc_get_dev)(int dev); + + reloc_get_dev = drvr->get_dev + gd->reloc_off; + if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0) + return reloc_get_dev(dev); +#else if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0) return drvr->get_dev(dev); +#endif drvr++; } return NULL; From da04995c7dc6772013a9a0dc5c767f190c402478 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 21 Feb 2007 13:44:34 +0100 Subject: [PATCH 23/30] [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) Signed-off-by: Stefan Roese --- drivers/systemace.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/systemace.c b/drivers/systemace.c index 3bd2ea999c..1d1be12520 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -57,13 +57,13 @@ #if !defined(__BIG_ENDIAN) #define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \ (readb(CFG_SYSTEMACE_BASE+off+1))) -#define ace_write(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \ - writeb(val, CFG_SYSTEMACE_BASE+off+1);} +#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \ + writeb(val, CFG_SYSTEMACE_BASE+off+1);} #else #define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \ (readb(CFG_SYSTEMACE_BASE+off+1)<<8)) -#define ace_write(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \ - writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);} +#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \ + writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);} #endif #else #define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off)) From 3a197b2fe49d6fa03978e60af2394efe9c70b527 Mon Sep 17 00:00:00 2001 From: Haiying Wang Date: Wed, 21 Feb 2007 16:52:31 +0100 Subject: [PATCH 24/30] [PATCH v3] Add sync to ensure flash_write_cmd is fully finished Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command is fully finished. The sync() is defined in each CPU's io.h file. For those CPUs which do not need sync for now, a dummy sync() is defined in their io.h as well. Signed-off-by: Haiying Wang --- drivers/cfi_flash.c | 16 ++++------------ include/asm-arm/io.h | 4 ++++ include/asm-avr32/io.h | 4 ++++ include/asm-blackfin/io.h | 5 +++++ include/asm-i386/io.h | 4 ++++ include/asm-m68k/io.h | 9 ++++++++- include/asm-microblaze/io.h | 4 ++++ include/asm-mips/io.h | 4 ++++ include/asm-nios/io.h | 4 ++++ include/asm-nios2/io.h | 5 ++++- include/asm-ppc/io.h | 11 +++++++++-- 11 files changed, 54 insertions(+), 16 deletions(-) diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c index 696f9a47ad..5579a1efc1 100644 --- a/drivers/cfi_flash.c +++ b/drivers/cfi_flash.c @@ -36,6 +36,7 @@ #include #include +#include #include #include #ifdef CFG_FLASH_CFI_DRIVER @@ -931,27 +932,18 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd, cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); *addr.cp = cword.c; -#ifdef CONFIG_BLACKFIN - asm("ssync;"); -#endif break; case FLASH_CFI_16BIT: debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp, cmd, cword.w, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); *addr.wp = cword.w; -#ifdef CONFIG_BLACKFIN - asm("ssync;"); -#endif break; case FLASH_CFI_32BIT: debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp, cmd, cword.l, info->chipwidth << CFI_FLASH_SHIFT_WIDTH); *addr.lp = cword.l; -#ifdef CONFIG_BLACKFIN - asm("ssync;"); -#endif break; case FLASH_CFI_64BIT: #ifdef DEBUG @@ -966,11 +958,11 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset } #endif *addr.llp = cword.ll; -#ifdef CONFIG_BLACKFIN - asm("ssync;"); -#endif break; } + + /* Ensure all the instructions are fully finished */ + sync(); } static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect) diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h index 648a10dd92..47c18e7e86 100644 --- a/include/asm-arm/io.h +++ b/include/asm-arm/io.h @@ -29,6 +29,10 @@ #include #endif /* XXX###XXX */ +static inline void sync(void) +{ +} + /* * Generic virtual read/write. Note that we don't support half-word * read/writes. We define __arch_*[bl] here, and leave __arch_*w diff --git a/include/asm-avr32/io.h b/include/asm-avr32/io.h index e86c456ae1..3c0d569233 100644 --- a/include/asm-avr32/io.h +++ b/include/asm-avr32/io.h @@ -89,4 +89,8 @@ static __inline__ void * phys_to_virt(unsigned long address) #endif /* __KERNEL__ */ +static inline void sync(void) +{ +} + #endif /* __ASM_AVR32_IO_H */ diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h index e5b388e262..fc27194a42 100644 --- a/include/asm-blackfin/io.h +++ b/include/asm-blackfin/io.h @@ -25,6 +25,11 @@ #ifndef _BLACKFIN_IO_H #define _BLACKFIN_IO_H +static inline void sync(void) +{ + __asm__ __volatile__ asm("ssync" : : : "memory"); +} + #ifdef __KERNEL__ #include diff --git a/include/asm-i386/io.h b/include/asm-i386/io.h index 85d44aaa15..e64d788fa7 100644 --- a/include/asm-i386/io.h +++ b/include/asm-i386/io.h @@ -201,4 +201,8 @@ __OUTS(b) __OUTS(w) __OUTS(l) +static inline void sync(void) +{ +} + #endif diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h index 79a9626b55..7bbdefba76 100644 --- a/include/asm-m68k/io.h +++ b/include/asm-m68k/io.h @@ -1 +1,8 @@ -/* */ +#ifndef __ASM_M68K_IO_H_ +#define __ASM_M68K_IO_H_ + +static inline void sync(void) +{ +} + +#endif /* __ASM_M68K_IO_H_ */ diff --git a/include/asm-microblaze/io.h b/include/asm-microblaze/io.h index 33590454cf..1c77ade4f1 100644 --- a/include/asm-microblaze/io.h +++ b/include/asm-microblaze/io.h @@ -125,4 +125,8 @@ io_outsl (unsigned long port, const void *src, unsigned long count) #define ioremap_writethrough(physaddr, size) (physaddr) #define ioremap_fullcache(physaddr, size) (physaddr) +static inline void sync(void) +{ +} + #endif /* __MICROBLAZE_IO_H__ */ diff --git a/include/asm-mips/io.h b/include/asm-mips/io.h index 857fb0302c..cd4d5dc9d9 100644 --- a/include/asm-mips/io.h +++ b/include/asm-mips/io.h @@ -447,4 +447,8 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size); #define dma_cache_wback(start,size) _dma_cache_wback(start,size) #define dma_cache_inv(start,size) _dma_cache_inv(start,size) +static inline void sync(void) +{ +} + #endif /* _ASM_IO_H */ diff --git a/include/asm-nios/io.h b/include/asm-nios/io.h index 07499d966d..d77695abb9 100644 --- a/include/asm-nios/io.h +++ b/include/asm-nios/io.h @@ -97,4 +97,8 @@ static inline void outsl (unsigned long port, const void *src, unsigned long cou while (count--) outl (*p++, port); } +static inline void sync(void) +{ +} + #endif /* __ASM_NIOS_IO_H_ */ diff --git a/include/asm-nios2/io.h b/include/asm-nios2/io.h index 0fab53bf0e..5bb5322952 100644 --- a/include/asm-nios2/io.h +++ b/include/asm-nios2/io.h @@ -24,7 +24,10 @@ #ifndef __ASM_NIOS2_IO_H_ #define __ASM_NIOS2_IO_H_ -#define sync() asm volatile ("sync" : : : "memory"); +static inline void sync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} extern unsigned char inb (unsigned char *port); extern unsigned short inw (unsigned short *port); diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h index 8e5fe113cb..bbc9ba0be6 100644 --- a/include/asm-ppc/io.h +++ b/include/asm-ppc/io.h @@ -95,8 +95,15 @@ extern void _outsl_ns(volatile u32 *port, const void *buf, int nl); * Acts as a barrier to ensure all previous I/O accesses have * completed before any further ones are issued. */ -#define eieio() __asm__ __volatile__ ("eieio" : : : "memory"); -#define sync() __asm__ __volatile__ ("sync" : : : "memory"); +static inline void eieio(void) +{ + __asm__ __volatile__ ("eieio" : : : "memory"); +} + +static inline void sync(void) +{ + __asm__ __volatile__ ("sync" : : : "memory"); +} /* Enforce in-order execution of data I/O. * No distinction between read/write on PPC; use eieio for all three. From 8274ec0bd01d2feb2c7f095eba78d42ea009798b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 22 Feb 2007 07:40:23 +0100 Subject: [PATCH 25/30] [PATCH] Change systemace driver to select 8 & 16bit mode As suggested by Grant Likely this patch enables the Xilinx SystemACE driver to select 8 or 16bit mode upon startup. Signed-off-by: Stefan Roese --- drivers/systemace.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/systemace.c b/drivers/systemace.c index 1d1be12520..634aa9ba7d 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -119,13 +119,10 @@ block_dev_desc_t *systemace_get_dev(int dev) systemace_dev.removable = 1; systemace_dev.block_read = systemace_read; -#if (CFG_SYSTEMACE_WIDTH == 16) /* - * By default the SystemACE comes up in 8-bit mode. - * Ensure that 16-bit mode gets enabled. + * Ensure the correct bus mode (8/16 bits) gets enabled */ - ace_writew(0x0001, 0); -#endif + ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0); init_part(&systemace_dev); From 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 22 Feb 2007 07:43:34 +0100 Subject: [PATCH 26/30] [PATCH] get_dev() now unconditionally uses manual relocation Since the relocation fix is not included yet and we're not sure how it will be added, this patch removes code that required relocation to be fixed for now. Signed-off-by: Stefan Roese --- disk/part.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/disk/part.c b/disk/part.c index 37bba77dd3..9e8bd4fb88 100644 --- a/disk/part.c +++ b/disk/part.c @@ -64,25 +64,17 @@ static const struct block_drvr block_drvr[] = { { }, }; -#ifndef CFG_FIXUP_RELOCATION DECLARE_GLOBAL_DATA_PTR; -#endif block_dev_desc_t *get_dev(char* ifname, int dev) { const struct block_drvr *drvr = block_drvr; + block_dev_desc_t* (*reloc_get_dev)(int dev); while (drvr->name) { -#ifndef CFG_FIXUP_RELOCATION - block_dev_desc_t* (*reloc_get_dev)(int dev); - reloc_get_dev = drvr->get_dev + gd->reloc_off; if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0) return reloc_get_dev(dev); -#else - if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0) - return drvr->get_dev(dev); -#endif drvr++; } return NULL; From 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Tue, 27 Feb 2007 12:40:16 +0300 Subject: [PATCH 27/30] MCC200 update - add LCD Progress Indicator --- board/mcc200/auto_update.c | 75 +++++++++++++++++++++++++++++++++++--- board/mcc200/lcd.c | 31 ++++++++++++++-- include/configs/mcc200.h | 1 + 3 files changed, 98 insertions(+), 9 deletions(-) diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 9ccda72c0b..cd6b391b10 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -106,6 +106,8 @@ struct flash_layout aufl_layout[AU_MAXFILES] = { { AU_FL_ROOTFS_ST, AU_FL_ROOTFS_ND, }, }; +ulong totsize; + /* where to load files into memory */ #define LOAD_ADDR ((unsigned char *)0x00200000) @@ -130,6 +132,11 @@ extern int flash_sect_erase(ulong, ulong); extern int flash_sect_protect (int, ulong, ulong); extern int flash_write (char *, ulong, ulong); extern int u_boot_hush_start(void); +#ifdef CONFIG_PROGRESSBAR +extern void show_progress(int, int); +extern void lcd_puts (char *); +extern void lcd_enable(void); +#endif int au_check_cksum_valid(int idx, long nbytes) { @@ -168,10 +175,12 @@ int au_check_header_valid(int idx, long nbytes) #endif if (nbytes < sizeof(*hdr)) { printf ("Image %s bad header SIZE\n", aufile[idx]); + ausize[idx] = 0; return -1; } if (ntohl(hdr->ih_magic) != IH_MAGIC || hdr->ih_arch != IH_CPU_PPC) { printf ("Image %s bad MAGIC or ARCH\n", aufile[idx]); + ausize[idx] = 0; return -1; } /* check the hdr CRC */ @@ -180,22 +189,26 @@ int au_check_header_valid(int idx, long nbytes) if (crc32 (0, (uchar *)hdr, sizeof(*hdr)) != checksum) { printf ("Image %s bad header checksum\n", aufile[idx]); + ausize[idx] = 0; return -1; } hdr->ih_hcrc = htonl(checksum); /* check the type - could do this all in one gigantic if() */ if ((idx == IDX_FIRMWARE) && (hdr->ih_type != IH_TYPE_FIRMWARE)) { printf ("Image %s wrong type\n", aufile[idx]); + ausize[idx] = 0; return -1; } if ((idx == IDX_KERNEL) && (hdr->ih_type != IH_TYPE_KERNEL)) { printf ("Image %s wrong type\n", aufile[idx]); + ausize[idx] = 0; return -1; } if ((idx == IDX_ROOTFS) && ( (hdr->ih_type != IH_TYPE_RAMDISK) || (hdr->ih_type != IH_TYPE_FILESYSTEM) ) ) { printf ("Image %s wrong type\n", aufile[idx]); + ausize[idx] = 0; return -1; } /* recycle checksum */ @@ -203,13 +216,17 @@ int au_check_header_valid(int idx, long nbytes) /* for kernel and app the image header must also fit into flash */ if (idx != IDX_FIRMWARE) checksum += sizeof(*hdr); + /* check the size does not exceed space in flash. HUSH scripts */ - /* all have ausize[] set to 0 */ if ((ausize[idx] != 0) && (ausize[idx] < checksum)) { printf ("Image %s is bigger than FLASH\n", aufile[idx]); + ausize[idx] = 0; return -1; } - return 0; + /* Update with the real filesize */ + ausize[idx] = (idx == IDX_FIRMWARE ? checksum + sizeof(*hdr) : checksum); + + return checksum; /* return size to be written to flash */ } int au_do_update(int idx, long sz) @@ -254,6 +271,10 @@ int au_do_update(int idx, long sz) debug ("flash_sect_erase(%lx, %lx);\n", start, end); flash_sect_erase(start, end); wait_ms(100); +#ifdef CONFIG_PROGRESSBAR + show_progress(end - start, totsize); +#endif + /* strip the header - except for the kernel and ramdisk */ if (hdr->ih_type == IH_TYPE_KERNEL || hdr->ih_type == IH_TYPE_RAMDISK) { addr = (char *)hdr; @@ -278,6 +299,10 @@ int au_do_update(int idx, long sz) return -1; } +#ifdef CONFIG_PROGRESSBAR + show_progress(nbytes, totsize); +#endif + /* check the data CRC of the copy */ if (crc32 (0, (uchar *)(start + off), ntohl(hdr->ih_size)) != ntohl(hdr->ih_dcrc)) { printf ("Image %s Bad Data Checksum after COPY\n", aufile[idx]); @@ -300,7 +325,7 @@ int do_auto_update(void) { block_dev_desc_t *stor_dev; long sz; - int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc; + int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc; char *env; long start, end; uchar keypad_status1[2] = {0,0}, keypad_status2[2] = {0,0}; @@ -319,6 +344,7 @@ int do_auto_update(void) (keypad_status1[1] != keypad_status2[1])) { return 0; } + au_usb_stor_curr_dev = -1; /* start USB */ if (usb_stop() < 0) { @@ -403,23 +429,50 @@ int do_auto_update(void) old_ctrlc = disable_ctrlc(0); bitmap_first = 0; - /* just loop thru all the possible files */ + + /* validate the images first */ for (i = 0; i < AU_MAXFILES; i++) { + ulong imsize; /* just read the header */ sz = file_fat_read(aufile[i], LOAD_ADDR, sizeof(image_header_t)); debug ("read %s sz %ld hdr %d\n", aufile[i], sz, sizeof(image_header_t)); if (sz <= 0 || sz < sizeof(image_header_t)) { debug ("%s not found\n", aufile[i]); + ausize[i] = 0; continue; } - if (au_check_header_valid(i, sz) < 0) { + /* au_check_header_valid() updates ausize[] */ + if ((imsize = au_check_header_valid(i, sz)) < 0) { debug ("%s header not valid\n", aufile[i]); continue; } - sz = file_fat_read(aufile[i], LOAD_ADDR, MAX_LOADSZ); + /* totsize accounts for image size and flash erase size */ + totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start)); + } + +#ifdef CONFIG_PROGRESSBAR + if (totsize) { + lcd_puts(" Update in progress\n"); + lcd_enable(); + } +#endif + + /* just loop thru all the possible files */ + for (i = 0; i < AU_MAXFILES && totsize; i++) { + if (!ausize[i]) { + continue; + } + sz = file_fat_read(aufile[i], LOAD_ADDR, ausize[i]); + debug ("read %s sz %ld hdr %d\n", aufile[i], sz, sizeof(image_header_t)); + + if (sz != ausize[i]) { + printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz); + continue; + } + if (sz <= 0 || sz <= sizeof(image_header_t)) { debug ("%s not found\n", aufile[i]); continue; @@ -452,6 +505,16 @@ int do_auto_update(void) usb_stop(); /* restore the old state */ disable_ctrlc(old_ctrlc); +#ifdef CONFIG_PROGRESSBAR + if (totsize) { + if (!res) { + lcd_puts("\n Update completed\n"); + } else { + lcd_puts("\n Update error\n"); + } + lcd_enable(); + } +#endif return 0; } #endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/mcc200/lcd.c b/board/mcc200/lcd.c index b2625160a5..98b86d1834 100644 --- a/board/mcc200/lcd.c +++ b/board/mcc200/lcd.c @@ -24,13 +24,13 @@ #ifdef CONFIG_LCD -#define SWAPPED_LCD +#undef SWAPPED_LCD /* For the previous h/w version */ /* * The name of the device used for communication * with the PSoC. */ #define PSOC_PSC MPC5XXX_PSC2 -#define PSOC_BAUD 500000UL +#define PSOC_BAUD 230400UL #define RTS_ASSERT 1 #define RTS_NEGATE 0 @@ -181,10 +181,35 @@ void lcd_enable (void) udelay (PSOC_WAIT_TIME); } if (!retries) { - printf ("%s Error: PSoC doesn't respond on " + printf ("%s Warning: PSoC doesn't respond on " "RTS NEGATE\n", __FUNCTION__); } return; } +#ifdef CONFIG_PROGRESSBAR + +#define FONT_WIDTH 8 /* the same as VIDEO_FONT_WIDTH in video_font.h */ +void show_progress (int size, int tot) +{ + int cnt; + int i; + static int rc = 0; + + rc += size; + + cnt = ((LCD_WIDTH/FONT_WIDTH) * rc) / tot; + + rc -= (cnt * tot) / (LCD_WIDTH/FONT_WIDTH); + + for (i = 0; i < cnt; i++) { + lcd_putc(0xdc); + } + + if (cnt) { + lcd_enable(); /* MCC200-specific - send the framebuffer to PSoC */ + } +} + +#endif #endif /* CONFIG_LCD */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index f60973b26d..621a81c9c5 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -265,6 +265,7 @@ */ #if !defined(CONFIG_PRS200) #define CONFIG_LCD 1 +#define CONFIG_PROGRESSBAR 1 #endif #if defined(CONFIG_LCD) From 743571145b37182757d4e688a77860b36ee77573 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 27 Feb 2007 14:26:04 +0100 Subject: [PATCH 28/30] Minor code cleanup. --- CHANGELOG | 440 ++++++++++++++++++++++++++++++++++++ board/esd/cpci750/cpci750.c | 22 +- board/mcc200/auto_update.c | 8 +- board/motionpro/motionpro.c | 5 +- board/prodrive/p3mx/p3mx.h | 1 - cpu/ppc4xx/44x_spd_ddr2.c | 34 +-- cpu/ppc4xx/start.S | 14 +- cpu/ppc4xx/tlb.c | 6 +- drivers/systemace.c | 8 +- include/common.h | 3 +- include/configs/mecp5200.h | 58 ++--- 11 files changed, 518 insertions(+), 81 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index ff386c9c3a..6e26105c2a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,443 @@ +commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72 +Author: Sergei Poselenov +Date: Tue Feb 27 12:40:16 2007 +0300 + + MCC200 update - add LCD Progress Indicator + +commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44 +Author: Stefan Roese +Date: Thu Feb 22 07:43:34 2007 +0100 + + [PATCH] get_dev() now unconditionally uses manual relocation + + Since the relocation fix is not included yet and we're not sure how + it will be added, this patch removes code that required relocation + to be fixed for now. + + Signed-off-by: Stefan Roese + +commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b +Author: Stefan Roese +Date: Thu Feb 22 07:40:23 2007 +0100 + + [PATCH] Change systemace driver to select 8 & 16bit mode + + As suggested by Grant Likely this patch enables the Xilinx SystemACE + driver to select 8 or 16bit mode upon startup. + + Signed-off-by: Stefan Roese + +commit 3a197b2fe49d6fa03978e60af2394efe9c70b527 +Author: Haiying Wang +Date: Wed Feb 21 16:52:31 2007 +0100 + + [PATCH v3] Add sync to ensure flash_write_cmd is fully finished + + Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command + is fully finished. The sync() is defined in each CPU's io.h file. For + those CPUs which do not need sync for now, a dummy sync() is defined in + their io.h as well. + + Signed-off-by: Haiying Wang + +commit da04995c7dc6772013a9a0dc5c767f190c402478 +Author: Stefan Roese +Date: Wed Feb 21 13:44:34 2007 +0100 + + [PATCH] Fix problem in systemace driver (ace_writew instead of ace_write) + + Signed-off-by: Stefan Roese + +commit 751bb57107d78978ae08e697c3deba816f5be091 +Author: Stefan Roese +Date: Tue Feb 20 13:21:57 2007 +0100 + + [PATCH] Fix relocation problem with "new" get_dev() function + + This patch enables the "new" get_dev() function for block devices + introduced by Grant Likely to be used on systems that still suffer + from the relocation problems (manual relocation neede because of + problems with linker script). + + Hopefully we can resolve this relocation issue soon for all platform + so we don't need this additional code anymore. + + Signed-off-by: Stefan Roese + +commit d93e2212f962668b3dce091ff5edc33f2347fe37 +Author: Stefan Roese +Date: Tue Feb 20 13:17:42 2007 +0100 + + [PATCH] Update SystemACE driver for 16bit access + + This patch removes some problems when the Xilinx SystemACE driver + is used with 16bit access on an big endian platform (like the + AMCC Katmai). + + Signed-off-by: Stefan Roese + +commit 874bb7b88fe9b4648e1288a387af2e31014a72f3 +Author: Stefan Roese +Date: Tue Feb 20 13:15:40 2007 +0100 + + [PATCH] Clean up Katmai (440SPe) linker script + + Signed-off-by: Stefan Roese + +commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f +Author: Stefan Roese +Date: Tue Feb 20 10:57:08 2007 +0100 + + [PATCH] Add support for the AMCC Katmai (440SPe) eval board + + Signed-off-by: Stefan Roese + +commit 0dc018ece13effc689e47479ea9ebf1c98a507f5 +Author: Stefan Roese +Date: Tue Feb 20 10:51:26 2007 +0100 + + [PATCH] I2C: Add support for multiple I2C busses for RTC & DTT + + This patch switches to the desired I2C bus when the date/dtt + commands are called. This can be configured using the + CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines. + + Signed-off-by: Stefan Roese + +commit 4037ed3b63923cfcec27f784a89057c3cbabcedb +Author: Stefan Roese +Date: Tue Feb 20 10:43:34 2007 +0100 + + [PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support + + This patch adds support for the DDR2 controller used on the + 440SP and 440SPe. It is tested on the Katmai (440SPe) eval + board and works fine with the following DIMM modules: + + - Corsair CM2X512-5400C4 (512MByte per DIMM) + - Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM) + - Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM) + + This patch also adds the nice functionality to dynamically + create the TLB entries for the SDRAM (tlb.c). So we should + never run into such problems with wrong (too short) TLB + initialization again on these platforms. + + Signed-off-by: Stefan Roese + +commit 36d830c9830379045f5daa9f542ac1c990c70068 +Author: Stefan Roese +Date: Tue Feb 20 10:35:42 2007 +0100 + + [PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files + + Since the existing 4xx SPD SDRAM initialization routines for the + 405 SDRAM controller and the 440 DDR controller don't have much in + common this patch splits both drivers into different files. + + This is in preparation for the 440 DDR2 controller support (440SP/e). + + Signed-off-by: Stefan Roese + +commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6 +Author: Stefan Roese +Date: Tue Feb 20 10:27:08 2007 +0100 + + [PATCH] PPC4xx: Add support for multiple I2C busses + + This patch adds support for multiple I2C busses on the PPC4xx + platforms. Define CONFIG_I2C_MULTI_BUS in the board config file + to make use of this feature. + + It also merges the 405 and 440 i2c header files into one common + file 4xx_i2c.h. + + Also the 4xx i2c reset procedure is reworked since I experienced + some problems with the first access on the 440SPe Katmai board. + + Signed-off-by: Stefan Roese + +commit eb867a76238fb38e952c37871b16d0d7fd61c95f +Author: Grant Likely +Date: Tue Feb 20 09:05:45 2007 +0100 + + [PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers + + Block device read/write is anonymous data; there is no need to use a + typed pointer. void * is fine. Also add a hook for block_read functions + + Signed-off-by: Grant Likely + +commit 53758fa20e935cc87eeb0519ed365df753a6f289 +Author: Grant Likely +Date: Tue Feb 20 09:05:38 2007 +0100 + + [PATCH 8_9] Add block_write hook to block_dev_desc_t + + Preparation for future patches which support block device writing + + Signed-off-by: Grant Likely + +commit f4852ebe6ca946a509667eb68be42026f837be76 +Author: Grant Likely +Date: Tue Feb 20 09:05:31 2007 +0100 + + [PATCH 7_9] Replace ace_readw_ace_writeb functions with macros + + Register read/write does not need to be wrapped in a full function. The + patch replaces them with macros. + + Signed-off-by: Grant Likely + +commit 3a8ce9af6fcb5744a7851b4440c07688acc40844 +Author: Grant Likely +Date: Tue Feb 20 09:05:23 2007 +0100 + + [PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c + + The code in this file is not a command; it is a device driver. Put it in + the correct place. There are zero functional changes in this patch, it + only moves the file. + + Signed-off-by: Grant Likely + +commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4 +Author: Grant Likely +Date: Tue Feb 20 09:05:16 2007 +0100 + + [PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent) + + This patch is in preparation of additional changes to the sysace driver. + May as well take this opportunity to fixup the inconsistent whitespace since + this file is about to undergo major changes anyway. + + There are zero functional changes in this patch. It only cleans up the + the whitespace. + + Signed-off-by: Grant Likely + +commit 80ba981d940471fe7e539e64fa3d2bd80002beda +Author: Grant Likely +Date: Tue Feb 20 09:05:07 2007 +0100 + + [PATCH 4_4] Remove local implementation of isprint() in ft_build.c + + isprint is already defined in ctype.c + + Signed-off-by: Grant Likely + +commit c95c4280d751ca078c2ff58228d2f2b44ccf0600 +Author: Grant Likely +Date: Tue Feb 20 09:05:00 2007 +0100 + + [PATCH 3_9] Move buffer print code from md command to common function + + Printing a buffer is a darn useful thing. Move the buffer print code + into print_buffer() in lib_generic/ + + Signed-off-by: Grant Likely + +commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a +Author: Grant Likely +Date: Tue Feb 20 09:04:52 2007 +0100 + + [PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets + + Change the xilinx device drivers and board code to include config.h + instead of xparameters.h directly. config.h always includes the + correct xparameters file. This change reduces the posibility of + including the wrong file when adding a new xilinx board port + + Signed-off-by: Grant Likely + +commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7 +Author: Grant Likely +Date: Tue Feb 20 09:04:34 2007 +0100 + + [PATCH 1_4] Merge common get_dev() routines for block devices + + Each of the filesystem drivers duplicate the get_dev routine. This change + merges them into a single function in part.c + + Signed-off-by: Grant Likely + +commit f5fcc3c20b65554e98a165542c36ee0c610a2d81 +Author: Wolfgang Denk +Date: Mon Feb 19 23:09:51 2007 +0100 + + MCC200: Software Updater: allow both "ramdisk" and "filesystem" types + as root file system images. + +commit 489c696ae7211218961d159e43e722d74c36fcbc +Author: Sergei Poselenov +Date: Wed Feb 14 14:30:28 2007 +0300 + + MCC200: Extensions to Software Update Mechanism + + Update / extend Software Update Mechanism for MCC200 board: + + - Add support for rootfs image added. The environment variables + "rootfs_st" and "rootfs_nd" can be used to override the default + values of the image start and end. + - Remove excessive key check code. + - Code cleanup. + +commit 4be23a12f23f1372634edc3215137b09768b7949 +Author: Stefan Roese +Date: Mon Feb 19 08:23:15 2007 +0100 + + [PATCH] Update Sequoia EBC configuration (NOR FLASH) + + As spotted by Matthias Fuchs, the READY input should not be + enabled for the NOR FLASH on the Sequoia board. + + Signed-off-by: Stefan Roese + +commit 497d012e5be0194e1084073d0081eb1a844796b2 +Author: Gary Jennejohn +Date: Mon Feb 12 13:11:50 2007 +0100 + + LPC2292: patch from Siemens. + +commit b0b1a920aebead0d44146e73676ae9d80fffc8e2 +Author: Stefan Roese +Date: Sat Feb 10 08:49:31 2007 +0100 + + [PATCH] Add missing p3mx.h file to repository (ups) + + Signed-off-by: Stefan Roese + +commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a +Author: Bartlomiej Sieka +Date: Fri Feb 9 10:45:42 2007 +0100 + + [Motion-PRO] Preliminary support for the Motion-PRO board. + +commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994 +Author: Stefan Roese +Date: Wed Feb 7 16:51:08 2007 +0100 + + [PATCH] Update some AMCC 4xx board config files (set initrd_high) + + Some boards that can have more than 768MBytes of SDRAM need to + set "initrd_high", so that the initrd can be accessed by the + Linux kernel. + + Signed-off-by: Stefan Roese + +commit 7372ca68227930d03cffa548310524cad5b96733 +Author: Stefan Roese +Date: Fri Feb 2 12:44:22 2007 +0100 + + [PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards + + Previously the strapping DCR/SDR was read to determine if the internal PCI + arbiter is enabled or not. This strapping bit can be overridden, so now + the current status is read from the correct DCR/SDR register. + + Signed-off-by: Stefan Roese + +commit 2aa54f651a42d198673318f07a20c89a43e4d197 +Author: Stefan Roese +Date: Fri Feb 2 12:42:08 2007 +0100 + + [PATCH] Change configuration output of Sycamore, Yellowstone & Rainier + + Signed-off-by: Stefan Roese + +commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b +Author: Stefan Roese +Date: Thu Feb 1 13:22:41 2007 +0100 + + [PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file + + When PCI PNP is enabled the pci pnp configuration routine is called + which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some + problems with some PCI cards. For now disable the PCI PNP configuration. + + Signed-off-by: Stefan Roese + +commit 2902fadade3be7659467e8d074048c6b7068f5c0 +Author: Stefan Roese +Date: Wed Jan 31 16:56:10 2007 +0100 + + [PATCH] Update 440EPx/440GRx cpu detection + + Signed-off-by: Stefan Roese + +commit d5ea287b02a6945c3977410e364a879dd1a555c8 +Author: Stefan Roese +Date: Wed Jan 31 16:38:04 2007 +0100 + + [PATCH] Update esd cpci5200 files + + Signed-off-by: Reinhard Arlt + +commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab +Author: Stefan Roese +Date: Wed Jan 31 16:37:34 2007 +0100 + + [PATCH] Add support for esd mecp5200 board + + Signed-off-by: Reinhard Arlt + +commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff +Author: Stefan Roese +Date: Wed Jan 31 12:38:50 2007 +0100 + + [PATCH] Remove unneccessary yellowstone board config file + + Signed-off-by: Stefan Roese + +commit e802594b6fa1b166308820c276b96dc0d7cc731c +Author: Stefan Roese +Date: Tue Jan 30 17:06:10 2007 +0100 + + [PATCH] Update Sequoia (440EPx) config file + + The config file now handles the 2nd target, the Rainier (440GRx) + evaluation board better. Additionally the PPC input clock was + adjusted to match the correct value of 33.0 MHz. + + Signed-off-by: Stefan Roese + +commit 700200c67e73b83751418abe7815840dca8fd6cb +Author: Stefan Roese +Date: Tue Jan 30 17:04:19 2007 +0100 + + [PATCH] Merge Yosemite & Yellowstone board ports + + Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR) + share one config file and all board specific files. This way we + don't have to maintain two different sets of files for nearly + identical boards. + + Signed-off-by: Stefan Roese + +commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6 +Author: Stefan Roese +Date: Tue Jan 30 15:01:49 2007 +0100 + + [PATCH] Update Prodrive SCPU (PDNB3 variant) board + + SCPU doesn't use redundant environment in flash. + + Signed-off-by: Stefan Roese + +commit 6304430ed642ea8fa15c9e5af965ac2e033eec45 +Author: Stefan Roese +Date: Tue Jan 30 12:51:07 2007 +0100 + + [PATCH] alpr: Update alpr board config file + + Signed-off-by: Stefan Roese + +commit f8db84f132b1e335f20f96138a1f09ed97b08664 +Author: Wolfgang Denk +Date: Tue Jan 30 00:50:40 2007 +0100 + + LPC2292 SODIMM port coding style cleanup. + commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 Author: Gary Jennejohn Date: Wed Jan 24 12:16:56 2007 +0100 diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 36bb7ce2c7..17e3568941 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -366,12 +366,12 @@ int misc_init_r () dcache_lock (); #endif if (flash_info[3].size < CFG_FLASH_INCREMENT) { - unsigned int flash_offset; + unsigned int flash_offset; unsigned int l; flash_offset = CFG_FLASH_INCREMENT - flash_info[3].size; for (l = 0; l < CFG_MAX_FLASH_SECT; l++) { - if (flash_info[3].start[l] != 0) { + if (flash_info[3].start[l] != 0) { flash_info[3].start[l] += flash_offset; } } @@ -503,7 +503,7 @@ static void move64 (unsigned long long *src, unsigned long long *dest) { asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */ "stfd 0, 0(4)" /* *dest = fpr0 */ - : : : "fr0"); /* Clobbers fr0 */ + : : : "fr0"); /* Clobbers fr0 */ return; } @@ -581,9 +581,9 @@ int mem_test_data (void) move64 (&(pattern[i]), pmem); move64 (pmem, &temp64); - /* hi = (temp64>>32) & 0xffffffff; */ - /* lo = temp64 & 0xffffffff; */ - /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ + /* hi = (temp64>>32) & 0xffffffff; */ + /* lo = temp64 & 0xffffffff; */ + /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */ hi = (pattern[i] >> 32) & 0xffffffff; lo = pattern[i] & 0xffffffff; @@ -856,11 +856,11 @@ int testdram (void) } #endif /* CFG_DRAM_TEST */ -/* ronen - the below functions are used by the bootm function */ +/* ronen - the below functions are used by the bootm function */ /* - we map the base register to fbe00000 (same mapping as in the LSP) */ /* - we turn off the RX gig dmas - to prevent the dma from overunning */ -/* the kernel data areas. */ -/* - we diable and invalidate the icache and dcache. */ +/* the kernel data areas. */ +/* - we diable and invalidate the icache and dcache. */ void my_remap_gt_regs_bootm (u32 cur_loc, u32 new_loc) { u32 temp; @@ -911,13 +911,11 @@ int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) GT_REG_READ(0x3d4, &reset_sample_high); printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high); - return(0); + return(0); } - U_BOOT_CMD( show_cfg, 1, 1, do_show_cfg, "show_cfg- Show Marvell strapping register\n", "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" ); - diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index cd6b391b10..faa01bd308 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -430,7 +430,7 @@ int do_auto_update(void) bitmap_first = 0; - /* validate the images first */ + /* validate the images first */ for (i = 0; i < AU_MAXFILES; i++) { ulong imsize; /* just read the header */ @@ -448,7 +448,7 @@ int do_auto_update(void) continue; } /* totsize accounts for image size and flash erase size */ - totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start)); + totsize += (imsize + (aufl_layout[i].end - aufl_layout[i].start)); } #ifdef CONFIG_PROGRESSBAR @@ -470,8 +470,8 @@ int do_auto_update(void) if (sz != ausize[i]) { printf ("%s: size %d read %d?\n", aufile[i], ausize[i], sz); - continue; - } + continue; + } if (sz <= 0 || sz <= sizeof(image_header_t)) { debug ("%s not found\n", aufile[i]); diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c index 95576ed56b..d60d23332b 100644 --- a/board/motionpro/motionpro.c +++ b/board/motionpro/motionpro.c @@ -141,11 +141,12 @@ long int initdram (int board_type) dramsize = 0; /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) + if (dramsize > 0) { *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; - else + } else { *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } /* let SDRAM CS1 start right after CS0 and disable it */ *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; diff --git a/board/prodrive/p3mx/p3mx.h b/board/prodrive/p3mx/p3mx.h index 91071e9209..1caae6b9c1 100644 --- a/board/prodrive/p3mx/p3mx.h +++ b/board/prodrive/p3mx/p3mx.h @@ -31,4 +31,3 @@ #define LED_ORANGE 4 #endif /* __P3MX_H__ */ - diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 6cff3a2e1a..ab421196b9 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -44,10 +44,10 @@ (defined(CONFIG_440SP) || defined(CONFIG_440SPE)) #ifndef TRUE -#define TRUE 1 +#define TRUE 1 #endif #ifndef FALSE -#define FALSE 0 +#define FALSE 0 #endif #define SDRAM_DDR1 1 @@ -114,7 +114,7 @@ static void program_codt(unsigned long *dimm_populated, static void program_mode(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks, - ddr_cas_id_t *selected_cas); + ddr_cas_id_t *selected_cas); static void program_tr(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -130,7 +130,7 @@ static void program_copt1(unsigned long *dimm_populated, static void program_initplr(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks, - ddr_cas_id_t selected_cas); + ddr_cas_id_t selected_cas); static unsigned long is_ecc_enabled(void); static void program_ecc(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, @@ -139,9 +139,9 @@ static void program_ecc_addr(unsigned long start_address, unsigned long num_bytes); #ifdef HARD_CODED_DQS /* calibration test with hardvalues */ -static void test(void); +static void test(void); #else -static void DQS_calibration_process(void); +static void DQS_calibration_process(void); #endif static void program_DQS_calibration(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, @@ -291,12 +291,12 @@ static unsigned long sdram_memsize(void) * .data sections. It also cannot call routines that require these sections. *-----------------------------------------------------------------------------*/ /*----------------------------------------------------------------------------- - * Function: initdram + * Function: initdram * Description: Configures SDRAM memory banks for DDR operation. - * Auto Memory Configuration option reads the DDR SDRAM EEPROMs - * via the IIC bus and then configures the DDR SDRAM memory - * banks appropriately. If Auto Memory Configuration is - * not used, it is assumed that no DIMM is plugged + * Auto Memory Configuration option reads the DDR SDRAM EEPROMs + * via the IIC bus and then configures the DDR SDRAM memory + * banks appropriately. If Auto Memory Configuration is + * not used, it is assumed that no DIMM is plugged *-----------------------------------------------------------------------------*/ long int initdram(int board_type) { @@ -532,10 +532,10 @@ static void get_spd_info(unsigned long *dimm_populated, #ifdef CONFIG_ADD_RAM_INFO void board_add_ram_info(int use_default) { - if (is_ecc_enabled()) - puts(" (ECC enabled)"); - else - puts(" (ECC not enabled)"); + if (is_ecc_enabled()) + puts(" (ECC enabled)"); + else + puts(" (ECC not enabled)"); } #endif @@ -1092,13 +1092,13 @@ static void program_codt(unsigned long *dimm_populated, static void program_initplr(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks, - ddr_cas_id_t selected_cas) + ddr_cas_id_t selected_cas) { unsigned long MR_CAS_value = 0; /****************************************************** ** Assumption: if more than one DIMM, all DIMMs are the same - ** as already checked in check_memory_type + ** as already checked in check_memory_type ******************************************************/ if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) { diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index a3db93ffbb..200f7b31ad 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1859,11 +1859,11 @@ pll_wait: #if defined(CONFIG_440) #define function_prolog(func_name) .text; \ - .align 2; \ - .globl func_name; \ - func_name: + .align 2; \ + .globl func_name; \ + func_name: #define function_epilog(func_name) .type func_name,@function; \ - .size func_name,.-func_name + .size func_name,.-func_name /*----------------------------------------------------------------------------+ | mttlb3. @@ -1877,7 +1877,7 @@ pll_wait: | mftlb3. +----------------------------------------------------------------------------*/ function_prolog(mftlb3) - TLBRE(3,3,2) + TLBRE(3,3,2) blr function_epilog(mftlb3) @@ -1893,7 +1893,7 @@ pll_wait: | mftlb2. +----------------------------------------------------------------------------*/ function_prolog(mftlb2) - TLBRE(3,3,1) + TLBRE(3,3,1) blr function_epilog(mftlb2) @@ -1909,7 +1909,7 @@ pll_wait: | mftlb1. +----------------------------------------------------------------------------*/ function_prolog(mftlb1) - TLBRE(3,3,0) + TLBRE(3,3,0) blr function_epilog(mftlb1) #endif /* CONFIG_440 */ diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c index 8c605591b8..e26e6d4020 100644 --- a/cpu/ppc4xx/tlb.c +++ b/cpu/ppc4xx/tlb.c @@ -37,8 +37,8 @@ typedef struct region { } region_t; static int add_tlb_entry(unsigned long base_addr, - unsigned long tlb_word0_size_value, - unsigned long tlb_word2_i_value) + unsigned long tlb_word0_size_value, + unsigned long tlb_word2_i_value) { int i; unsigned long tlb_word0_value; @@ -82,7 +82,7 @@ static int add_tlb_entry(unsigned long base_addr, } static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, - unsigned long tlb_word2_i_value) + unsigned long tlb_word2_i_value) { int rc; int tlb_i; diff --git a/drivers/systemace.c b/drivers/systemace.c index 634aa9ba7d..3848d9c59c 100644 --- a/drivers/systemace.c +++ b/drivers/systemace.c @@ -56,12 +56,12 @@ #if (CFG_SYSTEMACE_WIDTH == 8) #if !defined(__BIG_ENDIAN) #define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \ - (readb(CFG_SYSTEMACE_BASE+off+1))) + (readb(CFG_SYSTEMACE_BASE+off+1))) #define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \ writeb(val, CFG_SYSTEMACE_BASE+off+1);} #else #define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \ - (readb(CFG_SYSTEMACE_BASE+off+1)<<8)) + (readb(CFG_SYSTEMACE_BASE+off+1)<<8)) #define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \ writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);} #endif @@ -73,7 +73,7 @@ /* */ static unsigned long systemace_read(int dev, unsigned long start, - unsigned long blkcnt, void *buffer); + unsigned long blkcnt, void *buffer); static block_dev_desc_t systemace_dev = { 0 }; @@ -137,7 +137,7 @@ block_dev_desc_t *systemace_get_dev(int dev) * number of blocks read. A zero return indicates an error. */ static unsigned long systemace_read(int dev, unsigned long start, - unsigned long blkcnt, void *buffer) + unsigned long blkcnt, void *buffer) { int retry; unsigned blk_countdown; diff --git a/include/common.h b/include/common.h index 5b2e71c985..b162dbd7cf 100644 --- a/include/common.h +++ b/include/common.h @@ -187,8 +187,7 @@ void hang (void) __attribute__ ((noreturn)); long int initdram (int); int display_options (void); void print_size (ulong, const char *); -int print_buffer (ulong addr, void* data, uint width, uint count, - uint linelen); +int print_buffer (ulong addr, void* data, uint width, uint count, uint linelen); /* common/main.c */ void main_loop (void); diff --git a/include/configs/mecp5200.h b/include/configs/mecp5200.h index ccb0293329..0c1029426c 100644 --- a/include/configs/mecp5200.h +++ b/include/configs/mecp5200.h @@ -88,10 +88,10 @@ /* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT +#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT #define CONFIG_USB_STORAGE #else -#define ADD_USB_CMD 0 +#define ADD_USB_CMD 0 #endif /* @@ -100,7 +100,7 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_EEPROM | \ CFG_CMD_FAT | \ - CFG_CMD_EXT2 | \ + CFG_CMD_EXT2 | \ CFG_CMD_I2C | \ CFG_CMD_IDE | \ CFG_CMD_BSP | \ @@ -110,11 +110,11 @@ #include #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT16 1 #endif #if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ -# define CFG_LOWBOOT 1 +# define CFG_LOWBOOT 1 # define CFG_LOWBOOT08 1 #endif @@ -131,20 +131,20 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ - "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ - "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ - "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ - "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ - "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ - "loadaddr=01000000\0" \ - "serverip=192.168.2.99\0" \ - "gatewayip=10.0.0.79\0" \ - "user=mu\0" \ - "target=mecp5200.esd\0" \ - "script=mecp5200.bat\0" \ - "image=/tftpboot/vxWorks_mecp5200\0" \ - "ipaddr=10.0.13.196\0" \ - "netmask=255.255.0.0\0" \ + "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ + "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ + "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \ + "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \ + "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \ + "loadaddr=01000000\0" \ + "serverip=192.168.2.99\0" \ + "gatewayip=10.0.0.79\0" \ + "user=mu\0" \ + "target=mecp5200.esd\0" \ + "script=mecp5200.bat\0" \ + "image=/tftpboot/vxWorks_mecp5200\0" \ + "ipaddr=10.0.13.196\0" \ + "netmask=255.255.0.0\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_vxworks0" @@ -171,12 +171,12 @@ #define CFG_I2C_EEPROM_ADDR_LEN 2 #define CFG_EEPROM_PAGE_WRITE_BITS 5 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -#define CFG_I2C_MULTI_EEPROMS 1 +#define CFG_I2C_MULTI_EEPROMS 1 /* * Flash configuration */ #define CFG_FLASH_BASE 0xFFC00000 -#define CFG_FLASH_SIZE 0x00400000 +#define CFG_FLASH_SIZE 0x00400000 #define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x003E0000) #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ #define CFG_MAX_FLASH_SECT 512 @@ -200,15 +200,15 @@ #define CONFIG_ENV_OVERWRITE 1 #endif -#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ +#define CFG_FLASH_CFI_DRIVER 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_PROTECTION 1 /* use hardware protection */ #if 0 #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ #endif -#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ +#define CFG_FLASH_INCREMENT 0x00400000 /* size of flash bank */ #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } -#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ +#define CFG_FLASH_EMPTY_INFO 1 /* show if bank is empty */ /* @@ -272,7 +272,7 @@ #define CFG_LOAD_ADDR 0x100000 /* default load address */ -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ @@ -339,7 +339,7 @@ /* Offset for alternate registers */ #define CFG_ATA_ALT_OFFSET (0x005C) -/* Interval between registers */ -#define CFG_ATA_STRIDE 4 +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 #endif /* __CONFIG_H */ From e344568b1b46af85ec32d815586f91bc115d6223 Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Tue, 27 Feb 2007 20:15:30 +0300 Subject: [PATCH 29/30] MCC200: Fixes for update procedure - fix logic error in image type handling - make sure file system images (cramfs etc.) get stored in flash with image header stripped so they can be mounted through MTD --- board/mcc200/auto_update.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index faa01bd308..90d03ec47a 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -162,7 +162,7 @@ int au_check_cksum_valid(int idx, long nbytes) int au_check_header_valid(int idx, long nbytes) { image_header_t *hdr; - unsigned long checksum; + unsigned long checksum, fsize; hdr = (image_header_t *)LOAD_ADDR; /* check the easy ones first */ @@ -205,7 +205,7 @@ int au_check_header_valid(int idx, long nbytes) return -1; } if ((idx == IDX_ROOTFS) && - ( (hdr->ih_type != IH_TYPE_RAMDISK) || (hdr->ih_type != IH_TYPE_FILESYSTEM) ) + ( (hdr->ih_type != IH_TYPE_RAMDISK) && (hdr->ih_type != IH_TYPE_FILESYSTEM) ) ) { printf ("Image %s wrong type\n", aufile[idx]); ausize[idx] = 0; @@ -213,8 +213,10 @@ int au_check_header_valid(int idx, long nbytes) } /* recycle checksum */ checksum = ntohl(hdr->ih_size); - /* for kernel and app the image header must also fit into flash */ - if (idx != IDX_FIRMWARE) + + fsize = checksum + sizeof(*hdr); + /* for kernel and ramdisk the image header must also fit into flash */ + if (idx == IDX_KERNEL || hdr->ih_type == IH_TYPE_RAMDISK) checksum += sizeof(*hdr); /* check the size does not exceed space in flash. HUSH scripts */ @@ -224,7 +226,7 @@ int au_check_header_valid(int idx, long nbytes) return -1; } /* Update with the real filesize */ - ausize[idx] = (idx == IDX_FIRMWARE ? checksum + sizeof(*hdr) : checksum); + ausize[idx] = fsize; return checksum; /* return size to be written to flash */ } From ccbc7036648e465697ca298ba51e0e76dda352a0 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 28 Feb 2007 01:28:53 +0100 Subject: [PATCH 30/30] SC3: fix typo in default environment --- include/configs/sc3.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/configs/sc3.h b/include/configs/sc3.h index b767449759..f2f059863d 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -115,7 +115,7 @@ ":${hostname}:${netdev}:off panic=1\0" \ "flash_nfs=run nfsargs addip;" \ "bootm ${kernel_addr}\0" \ - "flash_nand=nand_args addip addcon;bootm ${kernel_addr}\0" \ + "flash_nand=run nand_args addip addcon;bootm ${kernel_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_4xx\0" \ "bootfile=/tftpboot/sc3/uImage\0" \