mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 09:58:52 +09:00
244 lines
8.7 KiB
Plaintext
244 lines
8.7 KiB
Plaintext
![]() |
The T2080QDS is a high-performance computing evaluation, development and
|
||
|
test platform supporting the T2080 QorIQ Power Architecture processor.
|
||
|
|
||
|
T2080 SoC Overview
|
||
|
------------------
|
||
|
The T2080 QorIQ multicore processor combines four dual-threaded e6500 Power
|
||
|
Architecture processor cores with high-performance datapath acceleration
|
||
|
logic and network and peripheral bus interfaces required for networking,
|
||
|
telecom/datacom, wireless infrastructure, and mil/aerospace applications.
|
||
|
|
||
|
T2080 includes the following functions and features:
|
||
|
- Four dual-threads 64-bit Power architecture e6500 cores, up to 1.8GHz
|
||
|
- 2MB L2 cache and 512KB CoreNet platform cache (CPC)
|
||
|
- Hierarchical interconnect fabric
|
||
|
- One 32-/64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
|
||
|
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
|
||
|
- 16 SerDes lanes up to 10.3125 GHz
|
||
|
- 8 Ethernet interfaces, supporting combinations of the following:
|
||
|
- Up to four 10 Gbps Ethernet MACs
|
||
|
- Up to eight 1 Gbps Ethernet MACs
|
||
|
- Up to four 2.5 Gbps Ethernet MACs
|
||
|
- High-speed peripheral interfaces
|
||
|
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
|
||
|
- Two Serial RapidIO 2.0 controllers/ports running at up to 5 GHz
|
||
|
- Additional peripheral interfaces
|
||
|
- Two serial ATA (SATA 2.0) controllers
|
||
|
- Two high-speed USB 2.0 controllers with integrated PHY
|
||
|
- Enhanced secure digital host controller (SD/SDHC/SDXC/eMMC)
|
||
|
- Enhanced serial peripheral interface (eSPI)
|
||
|
- Four I2C controllers
|
||
|
- Four 2-pin UARTs or two 4-pin UARTs
|
||
|
- Integrated Flash Controller supporting NAND and NOR flash
|
||
|
- Three eight-channel DMA engines
|
||
|
- Support for hardware virtualization and partitioning enforcement
|
||
|
- QorIQ Platform's Trust Architecture 2.0
|
||
|
|
||
|
Differences between T2080 and T2081
|
||
|
-----------------------------------
|
||
|
Feature T2080 T2081
|
||
|
1G Ethernet numbers: 8 6
|
||
|
10G Ethernet numbers: 4 2
|
||
|
SerDes lanes: 16 8
|
||
|
Serial RapidIO,RMan: 2 no
|
||
|
SATA Controller: 2 no
|
||
|
Aurora: yes no
|
||
|
SoC Package: 896-pins 780-pins
|
||
|
|
||
|
|
||
|
T2080QDS feature overview
|
||
|
-------------------------
|
||
|
Processor:
|
||
|
- T2080 SoC integrating four 64-bit dual-threads e6500 cores up to 1.8GHz
|
||
|
Memory:
|
||
|
- Single memory controller capable of supporting DDR3 and DDR3-LV devices
|
||
|
- Two DDR3 DIMMs up to 4GB, Dual rank @ 2133MT/s and ECC support
|
||
|
Ethernet interfaces:
|
||
|
- Two 1Gbps RGMII on-board ports
|
||
|
- Four 10Gbps XFI on-board cages
|
||
|
- 1Gbps/2.5Gbps SGMII Riser card
|
||
|
- 10Gbps XAUI Riser card
|
||
|
Accelerator:
|
||
|
- DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC
|
||
|
SerDes:
|
||
|
- 16 lanes up to 10.3125GHz
|
||
|
- Supports Aurora debug, PEX, SATA, SGMII, sRIO, HiGig, XFI and XAUI
|
||
|
IFC:
|
||
|
- 128MB NOR Flash, 512MB NAND Flash, PromJet debug port and FPGA
|
||
|
eSPI:
|
||
|
- Three SPI flash (16MB N25Q128A + 16MB EN25S64 + 512KB SST25WF040)
|
||
|
USB:
|
||
|
- Two USB2.0 ports with internal PHY (one Type-A + one micro Type-AB)
|
||
|
PCIE:
|
||
|
- Four PCI Express controllers (two PCIe 2.0 and two PCIe 3.0 with SR-IOV)
|
||
|
SATA:
|
||
|
- Two SATA 2.0 ports on-board
|
||
|
SRIO:
|
||
|
- Two Serial RapidIO 2.0 ports up to 5 GHz
|
||
|
eSDHC:
|
||
|
- Supports SD/SDHC/SDXC/eMMC Card
|
||
|
I2C:
|
||
|
- Four I2C controllers.
|
||
|
UART:
|
||
|
- Dual 4-pins UART serial ports
|
||
|
System Logic:
|
||
|
- QIXIS-II FPGA system controll
|
||
|
Debug Features:
|
||
|
- Support Legacy, COP/JTAG, Aurora, Event and EVT
|
||
|
|
||
|
|
||
|
System Memory map
|
||
|
-----------------
|
||
|
Start Address End Address Description Size
|
||
|
0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
|
||
|
0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
|
||
|
0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
|
||
|
0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
|
||
|
0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
|
||
|
0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
|
||
|
0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
|
||
|
0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
|
||
|
0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
|
||
|
0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
|
||
|
0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
|
||
|
0xC_4000_0000 0xC_4FFF_FFFF PCI Express 4 Mem Space 256MB
|
||
|
0xC_3000_0000 0xC_3FFF_FFFF PCI Express 3 Mem Space 256MB
|
||
|
0xC_2000_0000 0xC_2FFF_FFFF PCI Express 2 Mem Space 256MB
|
||
|
0xC_0000_0000 0xC_1FFF_FFFF PCI Express 1 Mem Space 512MB
|
||
|
0x0_0000_0000 0x0_ffff_ffff DDR 4GB
|
||
|
|
||
|
|
||
|
128M NOR Flash memory Map
|
||
|
-------------------------
|
||
|
Start Address End Address Definition Max size
|
||
|
0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
|
||
|
0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
|
||
|
0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
|
||
|
0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
|
||
|
0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
|
||
|
0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
|
||
|
0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
|
||
|
0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
|
||
|
0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
|
||
|
0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
|
||
|
0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
|
||
|
0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 1MB
|
||
|
0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
|
||
|
0xE8000000 0xE801FFFF RCW (current bank) 128KB
|
||
|
|
||
|
|
||
|
|
||
|
Software configurations and board settings
|
||
|
------------------------------------------
|
||
|
1. NOR boot:
|
||
|
a. build NOR boot image
|
||
|
$ make T2080QDS_config
|
||
|
$ make
|
||
|
b. program u-boot.bin image to NOR flash
|
||
|
=> tftp 1000000 u-boot.bin
|
||
|
=> pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize
|
||
|
set SW1[1:8] = '00010011', SW2[1] = '1', SW6[1:4] = '0000' for NOR boot
|
||
|
|
||
|
Switching between default bank0 and alternate bank4 on NOR flash
|
||
|
To change boot source to vbank4:
|
||
|
by software: run command 'qixis_reset altbank' in u-boot.
|
||
|
by DIP-switch: set SW6[1:4] = '0100'
|
||
|
|
||
|
To change boot source to vbank0:
|
||
|
by software: run command 'qixis_reset' in u-boot.
|
||
|
by DIP-Switch: set SW6[1:4] = '0000'
|
||
|
|
||
|
2. NAND Boot:
|
||
|
a. build PBL image for NAND boot
|
||
|
$ make T2080QDS_NAND_config
|
||
|
$ make
|
||
|
b. program u-boot-with-spl-pbl.bin to NAND flash
|
||
|
=> tftp 1000000 u-boot-with-spl-pbl.bin
|
||
|
=> nand erase 0 $filesize
|
||
|
=> nand write 1000000 0 $filesize
|
||
|
set SW1[1:8] = '10000010', SW2[1] = '0' and SW6[1:4] = '1001' for NAND boot
|
||
|
|
||
|
3. SPI Boot:
|
||
|
a. build PBL image for SPI boot
|
||
|
$ make T2080QDS_SPIFLASH_config
|
||
|
$ make
|
||
|
b. program u-boot-with-spl-pbl.bin to SPI flash
|
||
|
=> tftp 1000000 u-boot-with-spl-pbl.bin
|
||
|
=> sf probe 0
|
||
|
=> sf erase 0 f0000
|
||
|
=> sf write 1000000 0 $filesize
|
||
|
set SW1[1:8] = '00100010', SW2[1] ='1' for SPI boot
|
||
|
|
||
|
4. SD Boot:
|
||
|
a. build PBL image for SD boot
|
||
|
$ make T2080QDS_SDCARD_config
|
||
|
$ make
|
||
|
b. program u-boot-with-spl-pbl.bin to SD/MMC card
|
||
|
=> tftp 1000000 u-boot-with-spl-pbl.bin
|
||
|
=> mmc write 1000000 8 0x800
|
||
|
=> tftp 1000000 fsl_fman_ucode_T2080_xx.bin
|
||
|
=> mmc write 1000000 0x820 80
|
||
|
set SW1[1:8] = '00100000', SW2[1] = '0' for SD boot
|
||
|
|
||
|
|
||
|
2-stage NAND/SPI/SD boot loader
|
||
|
-------------------------------
|
||
|
PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
|
||
|
SPL further initializes DDR using SPD and environment variables
|
||
|
and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
|
||
|
Finally SPL transers control to u-boot for futher booting.
|
||
|
|
||
|
SPL has following features:
|
||
|
- Executes within 256K
|
||
|
- No relocation required
|
||
|
|
||
|
Run time view of SPL framework
|
||
|
-------------------------------------------------
|
||
|
|Area | Address |
|
||
|
-------------------------------------------------
|
||
|
|SecureBoot header | 0xFFFC0000 (32KB) |
|
||
|
-------------------------------------------------
|
||
|
|GD, BD | 0xFFFC8000 (4KB) |
|
||
|
-------------------------------------------------
|
||
|
|ENV | 0xFFFC9000 (8KB) |
|
||
|
-------------------------------------------------
|
||
|
|HEAP | 0xFFFCB000 (50KB) |
|
||
|
-------------------------------------------------
|
||
|
|STACK | 0xFFFD8000 (22KB) |
|
||
|
-------------------------------------------------
|
||
|
|U-boot SPL | 0xFFFD8000 (160KB) |
|
||
|
-------------------------------------------------
|
||
|
|
||
|
NAND Flash memory Map on T2080QDS
|
||
|
--------------------------------------------------------------
|
||
|
Start End Definition Size
|
||
|
0x000000 0x0FFFFF u-boot img 1MB (2 blocks)
|
||
|
0x100000 0x17FFFF u-boot env 512KB (1 block)
|
||
|
0x180000 0x1FFFFF FMAN ucode 512KB (1 block)
|
||
|
|
||
|
|
||
|
Micro SD Card memory Map on T2080QDS
|
||
|
----------------------------------------------------
|
||
|
Block #blocks Definition Size
|
||
|
0x008 2048 u-boot img 1MB
|
||
|
0x800 0016 u-boot env 8KB
|
||
|
0x820 0128 FMAN ucode 64KB
|
||
|
|
||
|
|
||
|
SPI Flash memory Map on T2080QDS
|
||
|
----------------------------------------------------
|
||
|
Start End Definition Size
|
||
|
0x000000 0x0FFFFF u-boot img 1MB
|
||
|
0x100000 0x101FFF u-boot env 8KB
|
||
|
0x110000 0x11FFFF FMAN ucode 64KB
|
||
|
|
||
|
|
||
|
How to update the ucode of Freescale FMAN
|
||
|
-----------------------------------------
|
||
|
=> tftp 1000000 fsl_fman_ucode_t2080_xx.bin
|
||
|
=> pro off all;erase 0xeff00000 0xeff1ffff;cp 1000000 0xeff00000 $filesize
|
||
|
|
||
|
|
||
|
For more details, please refer to T2080QDS User Guide and access
|
||
|
website www.freescale.com and Freescale QorIQ SDK Infocenter document.
|