2010-01-21 02:19:32 +09:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
|
|
|
*
|
|
|
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of
|
|
|
|
* the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program; if not, write to the Free Software
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
|
|
* MA 02111-1307 USA
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <config.h>
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#include <asm/arch/asm-offsets.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* L2CC Cache setup/invalidation/disable
|
|
|
|
*/
|
|
|
|
.macro init_l2cc
|
|
|
|
/* explicitly disable L2 cache */
|
|
|
|
mrc 15, 0, r0, c1, c0, 1
|
|
|
|
bic r0, r0, #0x2
|
|
|
|
mcr 15, 0, r0, c1, c0, 1
|
|
|
|
|
|
|
|
/* reconfigure L2 cache aux control reg */
|
2010-03-13 07:06:04 +09:00
|
|
|
mov r0, #0xC0 /* tag RAM */
|
|
|
|
add r0, r0, #0x4 /* data RAM */
|
|
|
|
orr r0, r0, #(1 << 24) /* disable write allocate delay */
|
|
|
|
orr r0, r0, #(1 << 23) /* disable write allocate combine */
|
|
|
|
orr r0, r0, #(1 << 22) /* disable write allocate */
|
2010-01-21 02:19:32 +09:00
|
|
|
|
|
|
|
cmp r3, #0x10 /* r3 contains the silicon rev */
|
|
|
|
|
|
|
|
/* disable write combine for TO 2 and lower revs */
|
|
|
|
orrls r0, r0, #(1 << 25)
|
|
|
|
|
|
|
|
mcr 15, 1, r0, c9, c0, 2
|
|
|
|
.endm /* init_l2cc */
|
|
|
|
|
|
|
|
/* AIPS setup - Only setup MPROTx registers.
|
|
|
|
* The PACR default values are good.*/
|
|
|
|
.macro init_aips
|
|
|
|
/*
|
|
|
|
* Set all MPROTx to be non-bufferable, trusted for R/W,
|
|
|
|
* not forced to user-mode.
|
|
|
|
*/
|
|
|
|
ldr r0, =AIPS1_BASE_ADDR
|
|
|
|
ldr r1, =0x77777777
|
|
|
|
str r1, [r0, #0x0]
|
|
|
|
str r1, [r0, #0x4]
|
|
|
|
ldr r0, =AIPS2_BASE_ADDR
|
|
|
|
str r1, [r0, #0x0]
|
|
|
|
str r1, [r0, #0x4]
|
|
|
|
/*
|
|
|
|
* Clear the on and off peripheral modules Supervisor Protect bit
|
|
|
|
* for SDMA to access them. Did not change the AIPS control registers
|
|
|
|
* (offset 0x20) access type
|
|
|
|
*/
|
|
|
|
.endm /* init_aips */
|
|
|
|
|
|
|
|
/* M4IF setup */
|
|
|
|
.macro init_m4if
|
|
|
|
/* VPU and IPU given higher priority (0x4)
|
|
|
|
* IPU accesses with ID=0x1 given highest priority (=0xA)
|
|
|
|
*/
|
|
|
|
ldr r0, =M4IF_BASE_ADDR
|
|
|
|
|
|
|
|
ldr r1, =0x00000203
|
|
|
|
str r1, [r0, #0x40]
|
|
|
|
|
|
|
|
ldr r1, =0x0
|
|
|
|
str r1, [r0, #0x44]
|
|
|
|
|
|
|
|
ldr r1, =0x00120125
|
|
|
|
str r1, [r0, #0x9C]
|
|
|
|
|
|
|
|
ldr r1, =0x001901A3
|
|
|
|
str r1, [r0, #0x48]
|
|
|
|
|
|
|
|
.endm /* init_m4if */
|
|
|
|
|
|
|
|
.macro setup_pll pll, freq
|
|
|
|
ldr r2, =\pll
|
|
|
|
ldr r1, =0x00001232
|
|
|
|
str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */
|
|
|
|
mov r1, #0x2
|
|
|
|
str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
|
|
|
|
|
|
|
|
str r3, [r2, #PLL_DP_OP]
|
|
|
|
str r3, [r2, #PLL_DP_HFS_OP]
|
|
|
|
|
|
|
|
str r4, [r2, #PLL_DP_MFD]
|
|
|
|
str r4, [r2, #PLL_DP_HFS_MFD]
|
|
|
|
|
|
|
|
str r5, [r2, #PLL_DP_MFN]
|
|
|
|
str r5, [r2, #PLL_DP_HFS_MFN]
|
|
|
|
|
|
|
|
ldr r1, =0x00001232
|
|
|
|
str r1, [r2, #PLL_DP_CTL]
|
|
|
|
1: ldr r1, [r2, #PLL_DP_CTL]
|
|
|
|
ands r1, r1, #0x1
|
|
|
|
beq 1b
|
|
|
|
.endm
|
|
|
|
|
|
|
|
.macro init_clock
|
|
|
|
ldr r0, =CCM_BASE_ADDR
|
|
|
|
|
|
|
|
/* Gate of clocks to the peripherals first */
|
|
|
|
ldr r1, =0x3FFFFFFF
|
|
|
|
str r1, [r0, #CLKCTL_CCGR0]
|
|
|
|
ldr r1, =0x0
|
|
|
|
str r1, [r0, #CLKCTL_CCGR1]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR2]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR3]
|
|
|
|
|
|
|
|
ldr r1, =0x00030000
|
|
|
|
str r1, [r0, #CLKCTL_CCGR4]
|
|
|
|
ldr r1, =0x00FFF030
|
|
|
|
str r1, [r0, #CLKCTL_CCGR5]
|
|
|
|
ldr r1, =0x00000300
|
|
|
|
str r1, [r0, #CLKCTL_CCGR6]
|
|
|
|
|
|
|
|
/* Disable IPU and HSC dividers */
|
|
|
|
mov r1, #0x60000
|
|
|
|
str r1, [r0, #CLKCTL_CCDR]
|
|
|
|
|
|
|
|
/* Make sure to switch the DDR away from PLL 1 */
|
|
|
|
ldr r1, =0x19239145
|
|
|
|
str r1, [r0, #CLKCTL_CBCDR]
|
|
|
|
/* make sure divider effective */
|
|
|
|
1: ldr r1, [r0, #CLKCTL_CDHIPR]
|
|
|
|
cmp r1, #0x0
|
|
|
|
bne 1b
|
|
|
|
|
|
|
|
/* Switch ARM to step clock */
|
|
|
|
mov r1, #0x4
|
|
|
|
str r1, [r0, #CLKCTL_CCSR]
|
|
|
|
mov r3, #DP_OP_800
|
|
|
|
mov r4, #DP_MFD_800
|
|
|
|
mov r5, #DP_MFN_800
|
|
|
|
setup_pll PLL1_BASE_ADDR
|
|
|
|
|
|
|
|
mov r3, #DP_OP_665
|
|
|
|
mov r4, #DP_MFD_665
|
|
|
|
mov r5, #DP_MFN_665
|
|
|
|
setup_pll PLL3_BASE_ADDR
|
|
|
|
|
|
|
|
/* Switch peripheral to PLL 3 */
|
|
|
|
ldr r0, =CCM_BASE_ADDR
|
2010-03-13 07:06:04 +09:00
|
|
|
ldr r1, =0x000010C0
|
2010-03-28 20:43:26 +09:00
|
|
|
orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
|
2010-01-21 02:19:32 +09:00
|
|
|
str r1, [r0, #CLKCTL_CBCMR]
|
|
|
|
ldr r1, =0x13239145
|
|
|
|
str r1, [r0, #CLKCTL_CBCDR]
|
|
|
|
mov r3, #DP_OP_665
|
|
|
|
mov r4, #DP_MFD_665
|
|
|
|
mov r5, #DP_MFN_665
|
|
|
|
setup_pll PLL2_BASE_ADDR
|
|
|
|
|
|
|
|
/* Switch peripheral to PLL2 */
|
|
|
|
ldr r0, =CCM_BASE_ADDR
|
|
|
|
ldr r1, =0x19239145
|
|
|
|
str r1, [r0, #CLKCTL_CBCDR]
|
|
|
|
ldr r1, =0x000020C0
|
2010-03-28 20:43:26 +09:00
|
|
|
orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
|
2010-01-21 02:19:32 +09:00
|
|
|
str r1, [r0, #CLKCTL_CBCMR]
|
|
|
|
|
|
|
|
mov r3, #DP_OP_216
|
|
|
|
mov r4, #DP_MFD_216
|
|
|
|
mov r5, #DP_MFN_216
|
|
|
|
setup_pll PLL3_BASE_ADDR
|
|
|
|
|
|
|
|
|
|
|
|
/* Set the platform clock dividers */
|
|
|
|
ldr r0, =ARM_BASE_ADDR
|
|
|
|
ldr r1, =0x00000725
|
|
|
|
str r1, [r0, #0x14]
|
|
|
|
|
|
|
|
ldr r0, =CCM_BASE_ADDR
|
|
|
|
|
|
|
|
/* Run 3.0 at Full speed, for other TO's wait till we increase VDDGP */
|
|
|
|
ldr r1, =0x0
|
|
|
|
ldr r3, [r1, #ROM_SI_REV]
|
|
|
|
cmp r3, #0x10
|
|
|
|
movls r1, #0x1
|
|
|
|
movhi r1, #0
|
|
|
|
str r1, [r0, #CLKCTL_CACRR]
|
|
|
|
|
|
|
|
/* Switch ARM back to PLL 1 */
|
|
|
|
mov r1, #0
|
|
|
|
str r1, [r0, #CLKCTL_CCSR]
|
|
|
|
|
|
|
|
/* setup the rest */
|
|
|
|
/* Use lp_apm (24MHz) source for perclk */
|
|
|
|
ldr r1, =0x000020C2
|
2010-03-28 20:43:26 +09:00
|
|
|
orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
|
2010-01-21 02:19:32 +09:00
|
|
|
str r1, [r0, #CLKCTL_CBCMR]
|
|
|
|
/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
|
2010-03-28 20:43:26 +09:00
|
|
|
ldr r1, =CONFIG_SYS_CLKTL_CBCDR
|
2010-01-21 02:19:32 +09:00
|
|
|
str r1, [r0, #CLKCTL_CBCDR]
|
|
|
|
|
|
|
|
/* Restore the default values in the Gate registers */
|
|
|
|
ldr r1, =0xFFFFFFFF
|
|
|
|
str r1, [r0, #CLKCTL_CCGR0]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR1]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR2]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR3]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR4]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR5]
|
|
|
|
str r1, [r0, #CLKCTL_CCGR6]
|
|
|
|
|
|
|
|
/* Use PLL 2 for UART's, get 66.5MHz from it */
|
|
|
|
ldr r1, =0xA5A2A020
|
|
|
|
str r1, [r0, #CLKCTL_CSCMR1]
|
|
|
|
ldr r1, =0x00C30321
|
|
|
|
str r1, [r0, #CLKCTL_CSCDR1]
|
|
|
|
|
|
|
|
/* make sure divider effective */
|
|
|
|
1: ldr r1, [r0, #CLKCTL_CDHIPR]
|
|
|
|
cmp r1, #0x0
|
|
|
|
bne 1b
|
|
|
|
|
|
|
|
mov r1, #0x0
|
|
|
|
str r1, [r0, #CLKCTL_CCDR]
|
|
|
|
|
|
|
|
/* for cko - for ARM div by 8 */
|
|
|
|
mov r1, #0x000A0000
|
|
|
|
add r1, r1, #0x00000F0
|
|
|
|
str r1, [r0, #CLKCTL_CCOSR]
|
|
|
|
.endm
|
|
|
|
|
|
|
|
.macro setup_wdog
|
|
|
|
ldr r0, =WDOG1_BASE_ADDR
|
|
|
|
mov r1, #0x30
|
|
|
|
strh r1, [r0]
|
|
|
|
.endm
|
|
|
|
|
|
|
|
.section ".text.init", "x"
|
|
|
|
|
|
|
|
.globl lowlevel_init
|
|
|
|
lowlevel_init:
|
|
|
|
ldr r0, =GPIO1_BASE_ADDR
|
|
|
|
ldr r1, [r0, #0x0]
|
|
|
|
orr r1, r1, #(1 << 23)
|
|
|
|
str r1, [r0, #0x0]
|
|
|
|
ldr r1, [r0, #0x4]
|
|
|
|
orr r1, r1, #(1 << 23)
|
|
|
|
str r1, [r0, #0x4]
|
|
|
|
|
|
|
|
#ifdef ENABLE_IMPRECISE_ABORT
|
2010-03-13 07:06:04 +09:00
|
|
|
mrs r1, spsr /* save old spsr */
|
|
|
|
mrs r0, cpsr /* read out the cpsr */
|
|
|
|
bic r0, r0, #0x100 /* clear the A bit */
|
|
|
|
msr spsr, r0 /* update spsr */
|
|
|
|
add lr, pc, #0x8 /* update lr */
|
|
|
|
movs pc, lr /* update cpsr */
|
2010-01-21 02:19:32 +09:00
|
|
|
nop
|
|
|
|
nop
|
|
|
|
nop
|
|
|
|
nop
|
2010-03-13 07:06:04 +09:00
|
|
|
msr spsr, r1 /* restore old spsr */
|
2010-01-21 02:19:32 +09:00
|
|
|
#endif
|
|
|
|
|
|
|
|
init_l2cc
|
|
|
|
|
|
|
|
init_aips
|
|
|
|
|
|
|
|
init_m4if
|
|
|
|
|
|
|
|
init_clock
|
|
|
|
|
|
|
|
/* r12 saved upper lr*/
|
|
|
|
mov pc,lr
|
|
|
|
|
|
|
|
/* Board level setting value */
|
|
|
|
DDR_PERCHARGE_CMD: .word 0x04008008
|
|
|
|
DDR_REFRESH_CMD: .word 0x00008010
|
|
|
|
DDR_LMR1_W: .word 0x00338018
|
|
|
|
DDR_LMR_CMD: .word 0xB2220000
|
|
|
|
DDR_TIMING_W: .word 0xB02567A9
|
|
|
|
DDR_MISC_W: .word 0x000A0104
|