2018-05-07 06:58:06 +09:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
2017-04-08 00:25:34 +09:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2017 Logic PD, Inc.
|
|
|
|
*
|
|
|
|
* Author: Adam Ford <aford173@gmail.com>
|
|
|
|
*
|
|
|
|
* Based on SabreSD by Fabio Estevam <fabio.estevam@nxp.com>
|
|
|
|
* and updates by Jagan Teki <jagan@amarulasolutions.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#include <miiphy.h>
|
2017-09-23 00:12:18 +09:00
|
|
|
#include <input.h>
|
2017-04-08 00:25:34 +09:00
|
|
|
#include <mmc.h>
|
|
|
|
#include <fsl_esdhc.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/gpio.h>
|
|
|
|
#include <linux/sizes.h>
|
|
|
|
#include <asm/arch/clock.h>
|
|
|
|
#include <asm/arch/crm_regs.h>
|
|
|
|
#include <asm/arch/iomux.h>
|
|
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
|
|
#include <asm/arch/mx6-pins.h>
|
|
|
|
#include <asm/arch/sys_proto.h>
|
2017-06-29 17:16:06 +09:00
|
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
|
|
#include <asm/mach-imx/iomux-v3.h>
|
2017-04-08 00:25:34 +09:00
|
|
|
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
|
|
|
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
|
|
|
|
#define NAND_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
|
|
|
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
|
|
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
|
|
|
|
int dram_init(void)
|
|
|
|
{
|
|
|
|
gd->ram_size = imx_ddr_size();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static iomux_v3_cfg_t const uart1_pads[] = {
|
|
|
|
MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
};
|
|
|
|
|
|
|
|
static iomux_v3_cfg_t const uart2_pads[] = {
|
|
|
|
MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_SD4_DAT5__UART2_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_SD4_DAT6__UART2_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
};
|
|
|
|
|
|
|
|
static iomux_v3_cfg_t const uart3_pads[] = {
|
|
|
|
MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
MX6_PAD_EIM_EB3__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
|
|
};
|
|
|
|
|
2018-12-28 23:47:40 +09:00
|
|
|
#ifndef CONFIG_SPL_BUILD
|
2017-04-08 00:25:34 +09:00
|
|
|
static void fixup_enet_clock(void)
|
|
|
|
{
|
|
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
|
|
struct gpio_desc nint;
|
|
|
|
struct gpio_desc reset;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Set Ref Clock to 50 MHz */
|
|
|
|
enable_fec_anatop_clock(0, ENET_50MHZ);
|
|
|
|
|
|
|
|
/* Set GPIO_16 as ENET_REF_CLK_OUT */
|
|
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
|
|
|
|
|
|
|
|
/* Request GPIO Pins to reset Ethernet with new clock */
|
|
|
|
ret = dm_gpio_lookup_name("GPIO4_7", &nint);
|
|
|
|
if (ret) {
|
|
|
|
printf("Unable to lookup GPIO4_7\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = dm_gpio_request(&nint, "eth0_nInt");
|
|
|
|
if (ret) {
|
|
|
|
printf("Unable to request eth0_nInt\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Ensure nINT is input or PHY won't startup */
|
|
|
|
dm_gpio_set_dir_flags(&nint, GPIOD_IS_IN);
|
|
|
|
|
|
|
|
ret = dm_gpio_lookup_name("GPIO4_9", &reset);
|
|
|
|
if (ret) {
|
|
|
|
printf("Unable to lookup GPIO4_9\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = dm_gpio_request(&reset, "eth0_reset");
|
|
|
|
if (ret) {
|
|
|
|
printf("Unable to request eth0_reset\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Reset LAN8710A PHY */
|
|
|
|
dm_gpio_set_dir_flags(&reset, GPIOD_IS_OUT);
|
|
|
|
dm_gpio_set_value(&reset, 0);
|
|
|
|
udelay(150);
|
|
|
|
dm_gpio_set_value(&reset, 1);
|
|
|
|
mdelay(50);
|
|
|
|
}
|
2018-12-28 23:47:40 +09:00
|
|
|
#endif
|
2017-04-08 00:25:34 +09:00
|
|
|
|
|
|
|
static void setup_iomux_uart(void)
|
|
|
|
{
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart3_pads, ARRAY_SIZE(uart3_pads));
|
|
|
|
}
|
|
|
|
|
|
|
|
static iomux_v3_cfg_t const nand_pads[] = {
|
|
|
|
MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL),
|
|
|
|
};
|
|
|
|
|
|
|
|
static void setup_nand_pins(void)
|
|
|
|
{
|
|
|
|
imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
|
|
{
|
|
|
|
if (phydev->drv->config)
|
|
|
|
phydev->drv->config(phydev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Do not overwrite the console
|
|
|
|
* Use always serial for U-Boot console
|
|
|
|
*/
|
|
|
|
int overwrite_console(void)
|
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_early_init_f(void)
|
|
|
|
{
|
2018-12-28 23:47:40 +09:00
|
|
|
#ifndef CONFIG_SPL_BUILD
|
2017-04-08 00:25:34 +09:00
|
|
|
fixup_enet_clock();
|
2018-12-28 23:47:40 +09:00
|
|
|
#endif
|
2017-04-08 00:25:34 +09:00
|
|
|
setup_iomux_uart();
|
|
|
|
setup_nand_pins();
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_init(void)
|
|
|
|
{
|
|
|
|
/* address of boot parameters */
|
|
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_late_init(void)
|
|
|
|
{
|
2017-08-04 03:22:09 +09:00
|
|
|
env_set("board_name", "imx6logic");
|
2017-04-08 00:25:34 +09:00
|
|
|
|
|
|
|
if (is_mx6dq()) {
|
2017-08-04 03:22:09 +09:00
|
|
|
env_set("board_rev", "MX6DQ");
|
|
|
|
env_set("fdt_file", "imx6q-logicpd.dtb");
|
2017-04-08 00:25:34 +09:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2018-07-06 10:58:24 +09:00
|
|
|
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
|
|
#include <asm/arch/mx6-ddr.h>
|
|
|
|
#include <asm/arch/mx6q-ddr.h>
|
|
|
|
#include <spl.h>
|
|
|
|
#include <linux/libfdt.h>
|
|
|
|
|
|
|
|
#ifdef CONFIG_SPL_OS_BOOT
|
|
|
|
int spl_start_uboot(void)
|
|
|
|
{
|
|
|
|
/* break into full u-boot on 'c' */
|
|
|
|
if (serial_tstc() && serial_getc() == 'c')
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-12-28 23:47:40 +09:00
|
|
|
/* SD interface */
|
|
|
|
#define USDHC_PAD_CTRL \
|
|
|
|
(PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
|
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
|
|
|
|
static iomux_v3_cfg_t const usdhc1_pads[] = {
|
|
|
|
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
};
|
|
|
|
|
|
|
|
static iomux_v3_cfg_t const usdhc2_pads[] = {
|
|
|
|
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
|
|
|
|
};
|
|
|
|
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
|
|
struct fsl_esdhc_cfg usdhc_cfg[] = {
|
|
|
|
{USDHC1_BASE_ADDR}, /* SOM */
|
|
|
|
{USDHC2_BASE_ADDR} /* Baseboard */
|
|
|
|
};
|
|
|
|
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
|
|
{
|
|
|
|
struct src *psrc = (struct src *)SRC_BASE_ADDR;
|
|
|
|
unsigned int reg = readl(&psrc->sbmr1) >> 11;
|
|
|
|
/*
|
|
|
|
* Upon reading BOOT_CFG register the following map is done:
|
|
|
|
* Bit 11 and 12 of BOOT_CFG register can determine the current
|
|
|
|
* mmc port
|
|
|
|
* 0x1 SD1-SOM
|
|
|
|
* 0x2 SD2-Baseboard
|
|
|
|
*/
|
|
|
|
|
|
|
|
reg &= 0x3; /* Only care about bottom 2 bits */
|
|
|
|
|
|
|
|
switch (reg) {
|
|
|
|
case 0:
|
|
|
|
SETUP_IOMUX_PADS(usdhc1_pads);
|
|
|
|
usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
|
|
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
|
|
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
SETUP_IOMUX_PADS(usdhc2_pads);
|
|
|
|
usdhc_cfg[1].esdhc_base = USDHC2_BASE_ADDR;
|
|
|
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
|
|
|
gd->arch.sdhc_clk = usdhc_cfg[1].sdhc_clk;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[reg]);
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
|
|
{
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2018-07-06 10:58:24 +09:00
|
|
|
static void ccgr_init(void)
|
|
|
|
{
|
|
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
|
|
writel(0x0FFFC000, &ccm->CCGR2);
|
|
|
|
writel(0x3FF00000, &ccm->CCGR3);
|
|
|
|
writel(0xFFFFF300, &ccm->CCGR4);
|
|
|
|
writel(0x0F0000F3, &ccm->CCGR5);
|
|
|
|
writel(0x00000FFF, &ccm->CCGR6);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mx6q_dcd_table[] = {
|
|
|
|
MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
|
|
|
|
MX6_IOM_GRP_DDRPKE, 0x00000000,
|
|
|
|
MX6_IOM_DRAM_SDCLK_0, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_SDCLK_1, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_CAS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_RAS, 0x00000030,
|
|
|
|
MX6_IOM_GRP_ADDDS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_RESET, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_SDBA2, 0x00000000,
|
|
|
|
MX6_IOM_DRAM_SDODT0, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_SDODT1, 0x00000030,
|
|
|
|
MX6_IOM_GRP_CTLDS, 0x00000030,
|
|
|
|
MX6_IOM_DDRMODE_CTL, 0x00020000,
|
|
|
|
MX6_IOM_DRAM_SDQS0, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_SDQS1, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_SDQS2, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_SDQS3, 0x00000030,
|
|
|
|
MX6_IOM_GRP_DDRMODE, 0x00020000,
|
|
|
|
MX6_IOM_GRP_B0DS, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B1DS, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B2DS, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B3DS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM0, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM1, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM2, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM3, 0x00000030,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x00008000,
|
|
|
|
MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
|
|
|
|
MX6_MMDC_P0_MPWLDECTRL0, 0x002D003A,
|
|
|
|
MX6_MMDC_P0_MPWLDECTRL1, 0x0038002B,
|
|
|
|
MX6_MMDC_P0_MPDGCTRL0, 0x03340338,
|
|
|
|
MX6_MMDC_P0_MPDGCTRL1, 0x0334032C,
|
|
|
|
MX6_MMDC_P0_MPRDDLCTL, 0x4036383C,
|
|
|
|
MX6_MMDC_P0_MPWRDLCTL, 0x2E384038,
|
|
|
|
MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
|
|
|
|
MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
|
|
|
|
MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
|
|
|
|
MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
|
|
|
|
MX6_MMDC_P0_MPMUR0, 0x00000800,
|
|
|
|
MX6_MMDC_P0_MDPDC, 0x00020036,
|
|
|
|
MX6_MMDC_P0_MDOTC, 0x09444040,
|
|
|
|
MX6_MMDC_P0_MDCFG0, 0xB8BE7955,
|
|
|
|
MX6_MMDC_P0_MDCFG1, 0xFF328F64,
|
|
|
|
MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
|
|
|
|
MX6_MMDC_P0_MDMISC, 0x00011740,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x00008000,
|
|
|
|
MX6_MMDC_P0_MDRWD, 0x000026D2,
|
|
|
|
MX6_MMDC_P0_MDOR, 0x00BE1023,
|
|
|
|
MX6_MMDC_P0_MDASP, 0x00000047,
|
|
|
|
MX6_MMDC_P0_MDCTL, 0x85190000,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x00888032,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x00008033,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x00008031,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x19408030,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x04008040,
|
|
|
|
MX6_MMDC_P0_MDREF, 0x00007800,
|
|
|
|
MX6_MMDC_P0_MPODTCTRL, 0x00000007,
|
|
|
|
MX6_MMDC_P0_MDPDC, 0x00025576,
|
|
|
|
MX6_MMDC_P0_MAPSR, 0x00011006,
|
|
|
|
MX6_MMDC_P0_MDSCR, 0x00000000,
|
|
|
|
/* enable AXI cache for VDOA/VPU/IPU */
|
|
|
|
|
|
|
|
MX6_IOMUXC_GPR4, 0xF00000CF,
|
|
|
|
/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
|
|
|
|
MX6_IOMUXC_GPR6, 0x007F007F,
|
|
|
|
MX6_IOMUXC_GPR7, 0x007F007F,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void ddr_init(int *table, int size)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < size / 2 ; i++)
|
|
|
|
writel(table[2 * i + 1], table[2 * i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void spl_dram_init(void)
|
|
|
|
{
|
|
|
|
if (is_mx6dq())
|
|
|
|
ddr_init(mx6q_dcd_table, ARRAY_SIZE(mx6q_dcd_table));
|
|
|
|
}
|
|
|
|
|
|
|
|
void board_init_f(ulong dummy)
|
|
|
|
{
|
|
|
|
/* DDR initialization */
|
|
|
|
spl_dram_init();
|
|
|
|
|
|
|
|
/* setup AIPS and disable watchdog */
|
|
|
|
arch_cpu_init();
|
|
|
|
|
|
|
|
ccgr_init();
|
|
|
|
gpr_init();
|
|
|
|
|
|
|
|
/* iomux and setup of uart and NAND pins */
|
|
|
|
board_early_init_f();
|
|
|
|
|
|
|
|
/* setup GP timer */
|
|
|
|
timer_init();
|
|
|
|
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
|
|
preloader_console_init();
|
|
|
|
|
|
|
|
/* Clear the BSS. */
|
|
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
|
|
|
|
/* load/boot image from boot device */
|
|
|
|
board_init_r(NULL, 0);
|
|
|
|
}
|
|
|
|
#endif
|