u-boot-brain/board/gdsys/common/ihs_mdio.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2014
 * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
 */

#ifndef _IHS_MDIO_H_
#define _IHS_MDIO_H_

struct ihs_mdio_info {
#ifdef CONFIG_GDSYS_LEGACY_DRIVERS
	u32 fpga;
#else
	struct udevice *fpga;
	int base;
#endif
	char *name;
};

int ihs_mdio_init(struct ihs_mdio_info *info);

#endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-07 06:58:06 +09:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-14 03:21:18 +09:00			`/*`
			`* (C) Copyright 2014`
			`* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc`
			`*/`

			`#ifndef _IHS_MDIO_H_`
			`#define _IHS_MDIO_H_`

			`struct ihs_mdio_info {`
ihs_mdio: Make DM-compatible Make the ihs_mdio driver DM-compatible, while retaining the old functionality for not-yet-converted boards. Signed-off-by: Mario Six <mario.six@gdsys.cc> 2018-04-27 21:52:10 +09:00			`#ifdef CONFIG_GDSYS_LEGACY_DRIVERS`
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-14 03:21:18 +09:00			`u32 fpga;`
ihs_mdio: Make DM-compatible Make the ihs_mdio driver DM-compatible, while retaining the old functionality for not-yet-converted boards. Signed-off-by: Mario Six <mario.six@gdsys.cc> 2018-04-27 21:52:10 +09:00			`#else`
			`struct udevice *fpga;`
			`int base;`
			`#endif`
mpc83xx: Add gdsys hrcon board The gdsys hrcon board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x GbE (optional) - Lattice ECP3 FPGA connected via eLBC and PCIe Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Stefan Roese <sr@denx.de> 2014-11-14 03:21:18 +09:00			`char *name;`
			`};`

			`int ihs_mdio_init(struct ihs_mdio_info *info);`

			`#endif`