brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-07-07 19:56:18 +09:00
Code Issues Projects Releases Wiki Activity
c98b889151
u-boot-brain/board/ti/j721e/Kconfig

64 lines
1.1 KiB
Plaintext
Raw Normal View History

board: ti: j721e: Add board support for j721e evm Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 13:59:49 +09:00
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
# Lokesh Vutla <lokeshvutla@ti.com>
choice
prompt "K3 J721E based boards"
optional
config TARGET_J721E_A72_EVM
bool "TI K3 based J721E EVM running on A72"
select ARM64
select SOC_K3_J721E
board: ti: j721e: Use EEPROM-based board detection The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 16:45:54 +09:00
select BOARD_LATE_INIT
imply TI_I2C_BOARD_DETECT
board: ti: j721e: Add board support for j721e evm Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 13:59:49 +09:00
select SYS_DISABLE_DCACHE_OPS
config TARGET_J721E_R5_EVM
bool "TI K3 based J721E EVM running on R5"
select CPU_V7R
select SYS_THUMB_BUILD
select SOC_K3_J721E
select K3_LOAD_SYSFW
select RAM
select SPL_RAM
armv7R: K3: j721e: Add support for triggering ddr init from SPL In SPL, DDR should be made available by the end of board_init_f() so that apis in board_init_r() can use ddr. Adding support for triggering DDR initialization from board_init_f(). Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2019-10-07 22:56:38 +09:00
select K3_J721E_DDRSS
board: ti: j721e: Add board support for j721e evm Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 13:59:49 +09:00
imply SYS_K3_SPL_ATF
board: ti: j721e: Use EEPROM-based board detection The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 16:45:54 +09:00
imply TI_I2C_BOARD_DETECT
board: ti: j721e: Add board support for j721e evm Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 13:59:49 +09:00
endchoice
if TARGET_J721E_A72_EVM
config SYS_BOARD
default "j721e"
config SYS_VENDOR
default "ti"
config SYS_CONFIG_NAME
default "j721e_evm"
board: ti: j721e: Use EEPROM-based board detection The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 16:45:54 +09:00
source "board/ti/common/Kconfig"
board: ti: j721e: Add board support for j721e evm Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 13:59:49 +09:00
endif
if TARGET_J721E_R5_EVM
config SYS_BOARD
default "j721e"
config SYS_VENDOR
default "ti"
config SYS_CONFIG_NAME
default "j721e_evm"
config SPL_LDSCRIPT
default "arch/arm/mach-omap2/u-boot-spl.lds"
board: ti: j721e: Use EEPROM-based board detection The TI J721E EVM system on module (SOM), the common processor board, and the associated daughtercards have on-board I2C-based EEPROMs containing board config data. Use the board detection infrastructure to do the following: 1) Parse the J721E SOM EEPROM and populate items like board name, board HW and SW revision as well as board serial number into the TI common EEPROM data structure residing in SRAM scratch space 2) Check for presence of daughter card(s) by probing associated I2C addresses used for on-board EEPROMs containing daughter card-specific data. If such a card is found, parse the EEPROM data such as for additional Ethernet MAC addresses and populate those into U-Boot accordingly 3) Dynamically apply daughter card DTB overlays to the U-Boot (proper) DTB during SPL execution 4) Dynamically create an U-Boot ENV variable called name_overlays during U-Boot execution containing a list of daugherboard-specific DTB overlays based on daughercards found to be used during Kernel boot. This patch adds support for the J721E system on module boards containing the actual SoC ("J721EX-PM2-SOM", accessed via CONFIG_EEPROM_CHIP_ADDRESS), the common processor board ("J7X-BASE-CPB"), the Quad-Port Ethernet Expansion Board ("J7X-VSC8514-ETH"), the infotainment board ("J7X-INFOTAN-EXP") as well as for the gateway/Ethernet switch/industrial expansion board ("J7X-GESI-EXP"). Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-07 16:45:54 +09:00
source "board/ti/common/Kconfig"
board: ti: j721e: Add board support for j721e evm Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
2019-06-13 13:59:49 +09:00
endif
Reference in New Issue Copy Permalink