mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 06:33:45 +09:00
323 lines
7.6 KiB
Plaintext
323 lines
7.6 KiB
Plaintext
![]() |
// SPDX-License-Identifier: GPL-2.0
|
||
|
/*
|
||
|
* Copyright (C) 2015 Phytec Messtechnik GmbH
|
||
|
* Author: Teresa Remmet <t.remmet@phytec.de>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
* published by the Free Software Foundation.
|
||
|
*/
|
||
|
|
||
|
#include "am33xx.dtsi"
|
||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||
|
|
||
|
/ {
|
||
|
model = "Phytec AM335x phyCORE";
|
||
|
compatible = "phytec,am335x-phycore-som", "ti,am33xx";
|
||
|
|
||
|
aliases {
|
||
|
rtc0 = &i2c_rtc;
|
||
|
rtc1 = &rtc;
|
||
|
};
|
||
|
|
||
|
cpus {
|
||
|
cpu@0 {
|
||
|
cpu0-supply = <&vdd1_reg>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
memory@80000000 {
|
||
|
device_type = "memory";
|
||
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||
|
};
|
||
|
|
||
|
regulators {
|
||
|
compatible = "simple-bus";
|
||
|
|
||
|
vcc5v: fixedregulator0 {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vcc5v";
|
||
|
regulator-min-microvolt = <5000000>;
|
||
|
regulator-max-microvolt = <5000000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* Crypto Module */
|
||
|
&aes {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&sham {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
/* Ethernet */
|
||
|
&am33xx_pinmux {
|
||
|
ethernet0_pins: pinmux_ethernet0 {
|
||
|
pinctrl-single,pins = <
|
||
|
AM33XX_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */
|
||
|
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */
|
||
|
AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE1) /* mii1_txen.rmii1_txen */
|
||
|
AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */
|
||
|
AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */
|
||
|
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */
|
||
|
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */
|
||
|
AM33XX_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
mdio_pins: pinmux_mdio {
|
||
|
pinctrl-single,pins = <
|
||
|
/* MDIO */
|
||
|
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||
|
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&cpsw_emac0 {
|
||
|
phy-handle = <&phy0>;
|
||
|
phy-mode = "rmii";
|
||
|
dual_emac_res_vlan = <1>;
|
||
|
};
|
||
|
|
||
|
&davinci_mdio {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&mdio_pins>;
|
||
|
status = "okay";
|
||
|
|
||
|
phy0: ethernet-phy@0 {
|
||
|
reg = <0>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&mac {
|
||
|
slaves = <1>;
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <ðernet0_pins>;
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
/* I2C Busses */
|
||
|
&am33xx_pinmux {
|
||
|
i2c0_pins: pinmux_i2c0 {
|
||
|
pinctrl-single,pins = <
|
||
|
AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
|
||
|
AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&i2c0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&i2c0_pins>;
|
||
|
clock-frequency = <400000>;
|
||
|
status = "okay";
|
||
|
|
||
|
tps: pmic@2d {
|
||
|
reg = <0x2d>;
|
||
|
};
|
||
|
|
||
|
i2c_tmp102: temp@4b {
|
||
|
compatible = "ti,tmp102";
|
||
|
reg = <0x4b>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
i2c_eeprom: eeprom@52 {
|
||
|
compatible = "atmel,24c32";
|
||
|
pagesize = <32>;
|
||
|
reg = <0x52>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
i2c_rtc: rtc@68 {
|
||
|
compatible = "microcrystal,rv4162";
|
||
|
reg = <0x68>;
|
||
|
status = "disabled";
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* NAND memory */
|
||
|
&am33xx_pinmux {
|
||
|
nandflash_pins: pinmux_nandflash {
|
||
|
pinctrl-single,pins = <
|
||
|
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
|
||
|
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
|
||
|
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
|
||
|
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
|
||
|
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
|
||
|
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
|
||
|
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
|
||
|
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
|
||
|
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
|
||
|
AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
|
||
|
AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
|
||
|
AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
|
||
|
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
|
||
|
AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&elm {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&gpmc {
|
||
|
status = "okay";
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&nandflash_pins>;
|
||
|
ranges = <0 0 0x08000000 0x1000000>; /* CS0: NAND */
|
||
|
nandflash: nand@0,0 {
|
||
|
compatible = "ti,omap2-nand";
|
||
|
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||
|
interrupt-parent = <&gpmc>;
|
||
|
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
|
||
|
<1 IRQ_TYPE_NONE>; /* termcount */
|
||
|
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
|
||
|
nand-bus-width = <8>;
|
||
|
ti,nand-ecc-opt = "bch8";
|
||
|
gpmc,device-nand = "true";
|
||
|
gpmc,device-width = <1>;
|
||
|
gpmc,sync-clk-ps = <0>;
|
||
|
gpmc,cs-on-ns = <0>;
|
||
|
gpmc,cs-rd-off-ns = <30>;
|
||
|
gpmc,cs-wr-off-ns = <30>;
|
||
|
gpmc,adv-on-ns = <0>;
|
||
|
gpmc,adv-rd-off-ns = <30>;
|
||
|
gpmc,adv-wr-off-ns = <30>;
|
||
|
gpmc,we-on-ns = <0>;
|
||
|
gpmc,we-off-ns = <20>;
|
||
|
gpmc,oe-on-ns = <10>;
|
||
|
gpmc,oe-off-ns = <30>;
|
||
|
gpmc,access-ns = <30>;
|
||
|
gpmc,rd-cycle-ns = <30>;
|
||
|
gpmc,wr-cycle-ns = <30>;
|
||
|
gpmc,bus-turnaround-ns = <0>;
|
||
|
gpmc,cycle2cycle-delay-ns = <50>;
|
||
|
gpmc,cycle2cycle-diffcsen;
|
||
|
gpmc,clk-activation-ns = <0>;
|
||
|
gpmc,wr-access-ns = <30>;
|
||
|
gpmc,wr-data-mux-bus-ns = <0>;
|
||
|
|
||
|
ti,elm-id = <&elm>;
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* Power */
|
||
|
#include "tps65910.dtsi"
|
||
|
|
||
|
&tps {
|
||
|
vcc1-supply = <&vcc5v>;
|
||
|
vcc2-supply = <&vcc5v>;
|
||
|
vcc3-supply = <&vcc5v>;
|
||
|
vcc4-supply = <&vcc5v>;
|
||
|
vcc5-supply = <&vcc5v>;
|
||
|
vcc6-supply = <&vcc5v>;
|
||
|
vcc7-supply = <&vcc5v>;
|
||
|
vccio-supply = <&vcc5v>;
|
||
|
|
||
|
regulators {
|
||
|
vrtc_reg: regulator@0 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vio_reg: regulator@1 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vdd1_reg: regulator@2 {
|
||
|
/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
|
||
|
regulator-name = "vdd_mpu";
|
||
|
regulator-min-microvolt = <912500>;
|
||
|
regulator-max-microvolt = <1378000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vdd2_reg: regulator@3 {
|
||
|
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||
|
regulator-name = "vdd_core";
|
||
|
regulator-min-microvolt = <912500>;
|
||
|
regulator-max-microvolt = <1150000>;
|
||
|
regulator-boot-on;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vdd3_reg: regulator@4 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vdig1_reg: regulator@5 {
|
||
|
regulator-name = "vdig1_1p8v";
|
||
|
regulator-min-microvolt = <1800000>;
|
||
|
regulator-max-microvolt = <1800000>;
|
||
|
};
|
||
|
|
||
|
vdig2_reg: regulator@6 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vpll_reg: regulator@7 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vdac_reg: regulator@8 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vaux1_reg: regulator@9 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vaux2_reg: regulator@10 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vaux33_reg: regulator@11 {
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
vmmc_reg: regulator@12 {
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* SPI Busses */
|
||
|
&am33xx_pinmux {
|
||
|
spi0_pins: pinmux_spi0 {
|
||
|
pinctrl-single,pins = <
|
||
|
AM33XX_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_clk.spi0_clk */
|
||
|
AM33XX_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0) /* spi0_d0.spi0_d0 */
|
||
|
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
|
||
|
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&spi0 {
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&spi0_pins>;
|
||
|
status = "okay";
|
||
|
|
||
|
serial_flash: m25p80@0 {
|
||
|
compatible = "jedec,spi-nor";
|
||
|
spi-max-frequency = <48000000>;
|
||
|
reg = <0x0>;
|
||
|
m25p,fast-read;
|
||
|
status = "disabled";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
};
|
||
|
};
|