mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 07:28:51 +09:00
248 lines
8.9 KiB
Plaintext
248 lines
8.9 KiB
Plaintext
![]() |
Introduction
|
||
|
============
|
||
|
|
||
|
HiKey960 is one of the 96Boards Consumer Edition board from HiSilicon.
|
||
|
The board/SoC has: -
|
||
|
* HiSilicon Kirin960 (HI3660) SoC with 4xCortex-A73 and 4xCortex-A53
|
||
|
* ARM Mali G71 MP8 GPU
|
||
|
* 3GB LPDDR4 SDRAM
|
||
|
* 32GB UFS Flash Storage
|
||
|
* microSD
|
||
|
* 802.11a/b/g/n WiFi, Bluetooth
|
||
|
|
||
|
More information about this board can be found in 96Boards website:
|
||
|
https://www.96boards.org/product/hikey960/
|
||
|
|
||
|
Currently the u-boot port supports: -
|
||
|
* SD card
|
||
|
|
||
|
Compile from source
|
||
|
===================
|
||
|
|
||
|
First get all the sources
|
||
|
|
||
|
> mkdir -p ~/hikey960/src ~/hikey960/bin
|
||
|
> cd ~/hikey960/src
|
||
|
> git clone https://github.com/ARM-software/arm-trusted-firmware
|
||
|
> git clone https://github.com/96boards-hikey/OpenPlatformPkg -b testing/hikey960_v1.3.4
|
||
|
> git clone https://github.com/96boards-hikey/l-loader -b testing/hikey960_v1.2
|
||
|
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/config
|
||
|
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_usb_xloader.img
|
||
|
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hisi-sec_uce_boot.img
|
||
|
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/sec_xloader.img
|
||
|
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/recovery.bin
|
||
|
> wget http://snapshots.linaro.org/96boards/reference-platform/components/uefi-staging/latest/hikey960/release/hikey_idt
|
||
|
|
||
|
Get the SCP_BL2 lpm3.img binary. It is shipped as part of the UEFI source.
|
||
|
The latest version can be obtained from the OpenPlatformPkg repo.
|
||
|
|
||
|
> cp OpenPlatformPkg/Platforms/Hisilicon/HiKey960/Binary/lpm3.img ~/hikey960/bin/
|
||
|
|
||
|
Compile U-Boot
|
||
|
==============
|
||
|
|
||
|
> cd ~/hikey960/src/u-boot
|
||
|
> make CROSS_COMPILE=aarch64-linux-gnu- hikey960_defconfig
|
||
|
> make CROSS_COMPILE=aarch64-linux-gnu-
|
||
|
> cp u-boot.bin ~/hikey960/bin/
|
||
|
|
||
|
Compile ARM Trusted Firmware (ATF)
|
||
|
==================================
|
||
|
|
||
|
> cd ~/hikey960/src/arm-trusted-firmware
|
||
|
> make CROSS_COMPILE=aarch64-linux-gnu- all fip \
|
||
|
SCP_BL2=~/hikey960/bin/lpm3.img \
|
||
|
BL33=~/hikey960/bin/u-boot.bin DEBUG=1 PLAT=hikey960
|
||
|
|
||
|
Copy the resulting FIP binary
|
||
|
> cp build/hikey960/debug/fip.bin ~/hikey960/bin
|
||
|
|
||
|
Compile l-loader
|
||
|
================
|
||
|
> cd ~/hikey960/src/l-loader
|
||
|
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl1.bin
|
||
|
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/bl2.bin
|
||
|
> ln -sf ~/hikey960/src/arm-trusted-firmware/build/hikey960/debug/fip.bin
|
||
|
> ln -sf ~/hikey960/bin/u-boot.bin
|
||
|
> make hikey960 PTABLE_LST=linux-32g NS_BL1U=u-boot.bin
|
||
|
|
||
|
Copy the resulting binaries
|
||
|
> cp *.img ~/hikey960/bin
|
||
|
> cp l-loader.bin ~/hikey960/bin
|
||
|
|
||
|
These instructions are adapted from
|
||
|
https://github.com/ARM-software/arm-trusted-firmware/blob/master/docs/plat/hikey960.rst
|
||
|
|
||
|
Setup Console
|
||
|
=============
|
||
|
|
||
|
Install ser2net. Use telnet as the console since UEFI in recovery mode
|
||
|
output window fails to display in minicom.
|
||
|
|
||
|
> sudo apt-get install ser2net
|
||
|
|
||
|
Configure ser2net
|
||
|
|
||
|
> sudo vi /etc/ser2net.conf
|
||
|
|
||
|
Append one line for serial-over-USB in #ser2net.conf
|
||
|
|
||
|
> 2004:telnet:0:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT banner
|
||
|
|
||
|
Start ser2net
|
||
|
|
||
|
> sudo killall ser2net
|
||
|
> sudo ser2net -u
|
||
|
|
||
|
Open the console.
|
||
|
|
||
|
> telnet localhost 2004
|
||
|
|
||
|
And you could open the console remotely, too.
|
||
|
|
||
|
Flashing
|
||
|
========
|
||
|
|
||
|
1. Boot Hikey960 into recovery mode as per the below document:
|
||
|
https://github.com/96boards/documentation/blob/master/consumer/hikey/hikey960/installation/board-recovery.md
|
||
|
|
||
|
Once Hikey960 is in recovery mode, flash the recovery binary:
|
||
|
|
||
|
> cd ~/hikey960/src
|
||
|
> chmod +x ./hikey_idt
|
||
|
> sudo ./hikey_idt -c config -p /dev/ttyUSB1
|
||
|
|
||
|
Now move to the Hikey960 console and press `f` during UEFI boot. This
|
||
|
will allow the board to boot into fastboot mode. Once the board is in
|
||
|
fastboot mode, you should see the ID of the HiKey960 board using the
|
||
|
following command
|
||
|
|
||
|
> sudo fastboot devices
|
||
|
|
||
|
1ED3822A018E3372 fastboot
|
||
|
|
||
|
3. Flash the images
|
||
|
|
||
|
Now, the images can be flashed using fastboot:
|
||
|
|
||
|
> sudo fastboot flash ptable ~/hikey960/bin/prm_ptable.img
|
||
|
> sudo fastboot flash xloader ~/hikey960/bin/sec_xloader.img
|
||
|
> sudo fastboot flash fastboot ~/hikey960/bin/l-loader.bin
|
||
|
> sudo fastboot flash fip ~/hikey960/bin/fip.bin
|
||
|
|
||
|
4. Set the "Boot Mode" switch to OFF position for normal boot mode.
|
||
|
Then power on HiKey960
|
||
|
|
||
|
Observe the console traces using UART6 on the Low Speed Expansion header:
|
||
|
|
||
|
NOTICE: BL2: v2.1(debug):v2.1-531-g3ee48f40
|
||
|
NOTICE: BL2: Built : 18:15:58, Aug 2 2019
|
||
|
INFO: BL2: Doing platform setup
|
||
|
INFO: UFS LUN0 contains 1024 blocks with 4096-byte size
|
||
|
INFO: UFS LUN1 contains 1024 blocks with 4096-byte size
|
||
|
INFO: UFS LUN2 contains 2048 blocks with 4096-byte size
|
||
|
INFO: UFS LUN3 contains 7805952 blocks with 4096-byte size
|
||
|
INFO: ufs: change power mode success
|
||
|
INFO: BL2: Loading image id 2
|
||
|
INFO: Loading image id=2 at address 0x89c80000
|
||
|
INFO: Image id=2 loaded: 0x89c80000 - 0x89cb5088
|
||
|
INFO: BL2: Initiating SCP_BL2 transfer to SCP
|
||
|
INFO: BL2: SCP_BL2: 0x89c80000@0x35088
|
||
|
INFO: BL2: SCP_BL2 HEAD:
|
||
|
INFO: BL2: SCP_BL2 0x7000 0x179 0x159 0x149
|
||
|
INFO: BL2: SCP_BL2 0x189 0x18b 0x18d 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x18f
|
||
|
INFO: BL2: SCP_BL2 0x191 0x0 0x193 0x195
|
||
|
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
||
|
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
||
|
INFO: BL2: SCP_BL2 0x18fd 0x18fd 0x18fd 0x18fd
|
||
|
INFO: BL2: SCP_BL2 0x4d454355 0x43494741 0x424d554e 0x21215245
|
||
|
INFO: BL2: SCP_BL2 0x4a054904 0x42912000 0xf841bfbc 0xe7fa0b04
|
||
|
INFO: BL2: SCP_BL2 0xb88cf000 0x3b18 0x3d1c 0x6809493e
|
||
|
INFO: BL2: SCP_BL2 0x4613680a 0x201f102 0xf0002a04 0x600a804c
|
||
|
INFO: BL2: SCP_BL2 0x204f04f 0xf203fb02 0xf102440a 0x60100204
|
||
|
INFO: BL2: SCP_BL2 0x160f04f 0xf103fb01 0x68004834 0x61044408
|
||
|
INFO: BL2: SCP_BL2 0x61866145 0xf8c061c7 0xf8c08020 0xf8c09024
|
||
|
INFO: BL2: SCP_BL2 0xf8c0a028 0xf3efb02c 0xf3ef8208 0x68118309
|
||
|
INFO: BL2: SCP_BL2 0xf1026401 0xf0110204 0xbf070f04 0x46113220
|
||
|
INFO: BL2: SCP_BL2 TAIL:
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x19cad151 0x19b80040 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 0x0 0x0 0x0 0x0
|
||
|
INFO: BL2: SCP_BL2 transferred to SCP
|
||
|
INFO: start fw loading
|
||
|
INFO: fw load success
|
||
|
WARNING: BL2: Platform setup already done!!
|
||
|
INFO: BL2: Loading image id 3
|
||
|
INFO: Loading image id=3 at address 0x1ac58000
|
||
|
INFO: Image id=3 loaded: 0x1ac58000 - 0x1ac63024
|
||
|
INFO: BL2: Loading image id 5
|
||
|
INFO: Loading image id=5 at address 0x1ac98000
|
||
|
INFO: Image id=5 loaded: 0x1ac98000 - 0x1ad0819c
|
||
|
NOTICE: BL2: Booting BL31
|
||
|
INFO: Entry point address = 0x1ac58000
|
||
|
INFO: SPSR = 0x3cd
|
||
|
NOTICE: BL31: v2.1(debug):v2.1-531-g3ee48f40
|
||
|
NOTICE: BL31: Built : 18:16:01, Aug 2 2019
|
||
|
INFO: ARM GICv2 driver initialized
|
||
|
INFO: BL31: Initializing runtime services
|
||
|
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
|
||
|
INFO: plat_setup_psci_ops: sec_entrypoint=0x1ac580fc
|
||
|
INFO: BL31: Preparing for EL3 exit to normal world
|
||
|
INFO: Entry point address = 0x1ac98000
|
||
|
INFO: SPSR = 0x3c9
|
||
|
|
||
|
|
||
|
U-Boot 2019.07-00628-g286f05a6fc-dirty (Aug 02 2019 - 17:14:05 +0530)
|
||
|
Hikey960
|
||
|
|
||
|
DRAM: 3 GiB
|
||
|
PSCI: v1.1
|
||
|
MMC: dwmmc1@ff37f000: 0
|
||
|
Loading Environment from EXT4... ** File not found /uboot.env **
|
||
|
|
||
|
** Unable to read "/uboot.env" from mmc0:2 **
|
||
|
In: serial@fff32000
|
||
|
Out: serial@fff32000
|
||
|
Err: serial@fff32000
|
||
|
Net: Net Initialization Skipped
|
||
|
No ethernet found.
|
||
|
Hit any key to stop autoboot: 0
|
||
|
switch to partitions #0, OK
|
||
|
mmc0 is current device
|
||
|
Scanning mmc 0:1...
|
||
|
Found /extlinux/extlinux.conf
|
||
|
Retrieving file: /extlinux/extlinux.conf
|
||
|
201 bytes read in 12 ms (15.6 KiB/s)
|
||
|
1: hikey960-kernel
|
||
|
Retrieving file: /Image
|
||
|
24689152 bytes read in 4377 ms (5.4 MiB/s)
|
||
|
append: earlycon=pl011,mmio32,0xfff32000 console=ttyAMA6,115200 rw root=/dev/mmcblk0p2 rot
|
||
|
Retrieving file: /hi3660-hikey960.dtb
|
||
|
35047 bytes read in 14 ms (2.4 MiB/s)
|
||
|
## Flattened Device Tree blob at 10000000
|
||
|
Booting using the fdt blob at 0x10000000
|
||
|
Using Device Tree in place at 0000000010000000, end 000000001000b8e6
|
||
|
|
||
|
Starting kernel ...
|
||
|
|
||
|
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
|
||
|
[ 0.000000] Linux version 5.2.0-03138-gd75da80dce39 (mani@Mani-XPS-13-9360) (gcc versi9
|
||
|
[ 0.000000] Machine model: HiKey960
|
||
|
[ 0.000000] earlycon: pl11 at MMIO32 0x00000000fff32000 (options '')
|
||
|
[ 0.000000] printk: bootconsole [pl11] enabled
|
||
|
[ 0.000000] efi: Getting EFI parameters from FDT:
|