mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
160 lines
4.2 KiB
ArmAsm
160 lines
4.2 KiB
ArmAsm
![]() |
/*
|
||
|
* Copyright (C) 2012-2014 Panasonic Corporation
|
||
|
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
|
||
|
*
|
||
|
* SPDX-License-Identifier: GPL-2.0+
|
||
|
*/
|
||
|
|
||
|
#include <config.h>
|
||
|
#include <linux/linkage.h>
|
||
|
#include <asm/system.h>
|
||
|
#include <asm/arch/led.h>
|
||
|
#include <asm/arch/arm-mpcore.h>
|
||
|
#include <asm/arch/sbc-regs.h>
|
||
|
|
||
|
ENTRY(lowlevel_init)
|
||
|
mov r8, lr @ persevere link reg across call
|
||
|
|
||
|
/*
|
||
|
* The UniPhier Boot ROM loads SPL code to the L2 cache.
|
||
|
* But CPUs can only do instruction fetch now because start.S has
|
||
|
* cleared C and M bits.
|
||
|
* First we need to turn on MMU and Dcache again to get back
|
||
|
* data access to L2.
|
||
|
*/
|
||
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register)
|
||
|
orr r0, r0, #(CR_C | CR_M) @ enable MMU and Dcache
|
||
|
mcr p15, 0, r0, c1, c0, 0
|
||
|
|
||
|
/*
|
||
|
* Now we are using the page table embedded in the Boot ROM.
|
||
|
* It is not handy since it is not a straight mapped table for sLD3.
|
||
|
* What we need to do next is to switch over to the page table in SPL.
|
||
|
*/
|
||
|
ldr r3, =init_page_table @ page table must be 16KB aligned
|
||
|
|
||
|
/* Disable MMU and Dcache before switching Page Table */
|
||
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register)
|
||
|
bic r0, r0, #(CR_C | CR_M) @ disable MMU and Dcache
|
||
|
mcr p15, 0, r0, c1, c0, 0
|
||
|
|
||
|
bl enable_mmu
|
||
|
|
||
|
#ifdef CONFIG_UNIPHIER_SMP
|
||
|
/*
|
||
|
* ACTLR (Auxiliary Control Register) for Cortex-A9
|
||
|
* bit[9] Parity on
|
||
|
* bit[8] Alloc in one way
|
||
|
* bit[7] EXCL (Exclusive cache bit)
|
||
|
* bit[6] SMP
|
||
|
* bit[3] Write full line of zeros mode
|
||
|
* bit[2] L1 Prefetch enable
|
||
|
* bit[1] L2 prefetch enable
|
||
|
* bit[0] FW (Cache and TLB maintenance broadcast)
|
||
|
*/
|
||
|
mrc p15, 0, r0, c1, c0, 1 @ ACTLR (Auxiliary Control Register)
|
||
|
orr r0, r0, #0x41 @ enable SMP, FW bit
|
||
|
mcr p15, 0, r0, c1, c0, 1
|
||
|
|
||
|
/* branch by CPU ID */
|
||
|
mrc p15, 0, r0, c0, c0, 5 @ MPIDR (Multiprocessor Affinity Register)
|
||
|
and r0, r0, #0x3
|
||
|
cmp r0, #0x0
|
||
|
beq primary_cpu
|
||
|
ldr r1, =ROM_BOOT_ROMRSV2
|
||
|
mov r0, #0
|
||
|
str r0, [r1]
|
||
|
0: wfe
|
||
|
ldr r0, [r1]
|
||
|
cmp r0, #0
|
||
|
beq 0b
|
||
|
bx r0 @ r0: entry point of U-Boot main for the secondary CPU
|
||
|
primary_cpu:
|
||
|
ldr r1, =ROM_BOOT_ROMRSV2
|
||
|
ldr r0, =_start @ entry for the secondary CPU
|
||
|
str r0, [r1]
|
||
|
ldr r0, [r1] @ make sure str is complete before sev
|
||
|
sev @ kick the sedoncary CPU
|
||
|
mrc p15, 4, r1, c15, c0, 0 @ Configuration Base Address Register
|
||
|
bfc r1, #0, #13 @ clear bit 12-0
|
||
|
mov r0, #-1
|
||
|
str r0, [r1, #SCU_INV_ALL] @ SCU Invalidate All Register
|
||
|
mov r0, #1 @ SCU enable
|
||
|
str r0, [r1, #SCU_CTRL] @ SCU Control Register
|
||
|
#endif
|
||
|
|
||
|
bl setup_init_ram @ RAM area for temporary stack pointer
|
||
|
|
||
|
mov lr, r8 @ restore link
|
||
|
mov pc, lr @ back to my caller
|
||
|
ENDPROC(lowlevel_init)
|
||
|
|
||
|
ENTRY(enable_mmu)
|
||
|
mrc p15, 0, r0, c2, c0, 2 @ TTBCR (Translation Table Base Control Register)
|
||
|
bic r0, r0, #0x37
|
||
|
orr r0, r0, #0x20 @ disable TTBR1
|
||
|
mcr p15, 0, r0, c2, c0, 2
|
||
|
|
||
|
orr r0, r3, #0x8 @ Outer Cacheability for table walks: WBWA
|
||
|
mcr p15, 0, r0, c2, c0, 0 @ TTBR0
|
||
|
|
||
|
mov r0, #0
|
||
|
mcr p15, 0, r0, c8, c7, 0 @ invalidate TLBs
|
||
|
|
||
|
mov r0, #-1 @ manager for all domains (No permission check)
|
||
|
mcr p15, 0, r0, c3, c0, 0 @ DACR (Domain Access Control Register)
|
||
|
|
||
|
dsb
|
||
|
isb
|
||
|
/*
|
||
|
* MMU on:
|
||
|
* TLBs was already invalidated in "../start.S"
|
||
|
* So, we don't need to invalidate it here.
|
||
|
*/
|
||
|
mrc p15, 0, r0, c1, c0, 0 @ SCTLR (System Contrl Register)
|
||
|
orr r0, r0, #(CR_C | CR_M) @ MMU and Dcache enable
|
||
|
mcr p15, 0, r0, c1, c0, 0
|
||
|
|
||
|
mov pc, lr
|
||
|
ENDPROC(enable_mmu)
|
||
|
|
||
|
#include <asm/arch/ssc-regs.h>
|
||
|
|
||
|
#define BOOT_RAM_SIZE (SSC_WAY_SIZE)
|
||
|
#define BOOT_WAY_BITS (0x00000100) /* way 8 */
|
||
|
|
||
|
ENTRY(setup_init_ram)
|
||
|
/*
|
||
|
* Touch to zero for the boot way
|
||
|
*/
|
||
|
0:
|
||
|
/*
|
||
|
* set SSCOQM, SSCOQAD, SSCOQSZ, SSCOQWN in this order
|
||
|
*/
|
||
|
ldr r0, = 0x00408006 @ touch to zero with address range
|
||
|
ldr r1, = SSCOQM
|
||
|
str r0, [r1]
|
||
|
ldr r0, = (CONFIG_SYS_INIT_SP_ADDR - BOOT_RAM_SIZE) @ base address
|
||
|
ldr r1, = SSCOQAD
|
||
|
str r0, [r1]
|
||
|
ldr r0, = BOOT_RAM_SIZE
|
||
|
ldr r1, = SSCOQSZ
|
||
|
str r0, [r1]
|
||
|
ldr r0, = BOOT_WAY_BITS
|
||
|
ldr r1, = SSCOQWN
|
||
|
str r0, [r1]
|
||
|
ldr r1, = SSCOPPQSEF
|
||
|
ldr r0, [r1]
|
||
|
cmp r0, #0 @ check if the command is successfully set
|
||
|
bne 0b @ try again if an error occurres
|
||
|
|
||
|
ldr r1, = SSCOLPQS
|
||
|
1:
|
||
|
ldr r0, [r1]
|
||
|
cmp r0, #0x4
|
||
|
bne 1b @ wait until the operation is completed
|
||
|
str r0, [r1] @ clear the complete notification flag
|
||
|
|
||
|
mov pc, lr
|
||
|
ENDPROC(setup_init_ram)
|