u-boot-brain/lib/efi_loader/efi_variable.c

1385 lines
35 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
/*
* UEFI runtime variable services
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
*
* Copyright (c) 2017 Rob Clark
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
*/
#include <common.h>
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
#include <efi_loader.h>
#include <env_internal.h>
#include <hexdump.h>
#include <malloc.h>
#include <rtc.h>
#include <search.h>
#include <linux/compat.h>
#include <u-boot/crc.h>
#include "../lib/crypto/pkcs7_parser.h"
enum efi_secure_mode {
EFI_MODE_SETUP,
EFI_MODE_USER,
EFI_MODE_AUDIT,
EFI_MODE_DEPLOYED,
};
const efi_guid_t efi_guid_cert_type_pkcs7 = EFI_CERT_TYPE_PKCS7_GUID;
static bool efi_secure_boot;
static int efi_secure_mode;
static u8 efi_vendor_keys;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
#define READ_ONLY BIT(31)
/*
* Mapping between EFI variables and u-boot variables:
*
* efi_$guid_$varname = {attributes}(type)value
*
* For example:
*
* efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported=
* "{ro,boot,run}(blob)0000000000000000"
* efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder=
* "(blob)00010000"
*
* The attributes are a comma separated list of these possible
* attributes:
*
* + ro - read-only
* + boot - boot-services access
* + run - runtime access
*
* NOTE: with current implementation, no variables are available after
* ExitBootServices, and all are persisted (if possible).
*
* If not specified, the attributes default to "{boot}".
*
* The required type is one of:
*
* + utf8 - raw utf8 string
* + blob - arbitrary length hex string
*
* Maybe a utf16 type would be useful to for a string value to be auto
* converted to utf16?
*/
#define PREFIX_LEN (strlen("efi_xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx_"))
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
/**
* efi_to_native() - convert the UEFI variable name and vendor GUID to U-Boot
* variable name
*
* The U-Boot variable name is a concatenation of prefix 'efi', the hexstring
* encoded vendor GUID, and the UTF-8 encoded UEFI variable name separated by
* underscores, e.g. 'efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder'.
*
* @native: pointer to pointer to U-Boot variable name
* @variable_name: UEFI variable name
* @vendor: vendor GUID
* Return: status code
*/
static efi_status_t efi_to_native(char **native, const u16 *variable_name,
const efi_guid_t *vendor)
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
{
size_t len;
char *pos;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
len = PREFIX_LEN + utf16_utf8_strlen(variable_name) + 1;
*native = malloc(len);
if (!*native)
return EFI_OUT_OF_RESOURCES;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
pos = *native;
pos += sprintf(pos, "efi_%pUl_", vendor);
utf16_utf8_strcpy(&pos, variable_name);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
return EFI_SUCCESS;
}
/**
* prefix() - skip over prefix
*
* Skip over a prefix string.
*
* @str: string with prefix
* @prefix: prefix string
* Return: string without prefix, or NULL if prefix not found
*/
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
static const char *prefix(const char *str, const char *prefix)
{
size_t n = strlen(prefix);
if (!strncmp(prefix, str, n))
return str + n;
return NULL;
}
/**
* parse_attr() - decode attributes part of variable value
*
* Convert the string encoded attributes of a UEFI variable to a bit mask.
* TODO: Several attributes are not supported.
*
* @str: value of U-Boot variable
* @attrp: pointer to UEFI attributes
* @timep: pointer to time attribute
* Return: pointer to remainder of U-Boot variable value
*/
static const char *parse_attr(const char *str, u32 *attrp, u64 *timep)
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
{
u32 attr = 0;
char sep = '{';
if (*str != '{') {
*attrp = EFI_VARIABLE_BOOTSERVICE_ACCESS;
return str;
}
while (*str == sep) {
const char *s;
str++;
if ((s = prefix(str, "ro"))) {
attr |= READ_ONLY;
} else if ((s = prefix(str, "nv"))) {
attr |= EFI_VARIABLE_NON_VOLATILE;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
} else if ((s = prefix(str, "boot"))) {
attr |= EFI_VARIABLE_BOOTSERVICE_ACCESS;
} else if ((s = prefix(str, "run"))) {
attr |= EFI_VARIABLE_RUNTIME_ACCESS;
} else if ((s = prefix(str, "time="))) {
attr |= EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS;
hex2bin((u8 *)timep, s, sizeof(*timep));
s += sizeof(*timep) * 2;
} else if (*str == '}') {
break;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
} else {
printf("invalid attribute: %s\n", str);
break;
}
str = s;
sep = ',';
}
str++;
*attrp = attr;
return str;
}
static efi_status_t efi_set_variable_internal(u16 *variable_name,
const efi_guid_t *vendor,
u32 attributes,
efi_uintn_t data_size,
const void *data,
bool ro_check);
/**
* efi_transfer_secure_state - handle a secure boot state transition
* @mode: new state
*
* Depending on @mode, secure boot related variables are updated.
* Those variables are *read-only* for users, efi_set_variable_internal()
* is called here.
*
* Return: EFI_SUCCESS on success, status code (negative) on error
*/
static efi_status_t efi_transfer_secure_state(enum efi_secure_mode mode)
{
u32 attributes;
u8 val;
efi_status_t ret;
debug("Secure state from %d to %d\n", efi_secure_mode, mode);
attributes = EFI_VARIABLE_BOOTSERVICE_ACCESS |
EFI_VARIABLE_RUNTIME_ACCESS;
if (mode == EFI_MODE_DEPLOYED) {
val = 1;
ret = efi_set_variable_internal(L"SecureBoot",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"SetupMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"AuditMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 1;
ret = efi_set_variable_internal(L"DeployedMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
efi_secure_boot = true;
} else if (mode == EFI_MODE_AUDIT) {
ret = efi_set_variable_internal(L"PK",
&efi_global_variable_guid,
attributes,
0, NULL,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"SecureBoot",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 1;
ret = efi_set_variable_internal(L"SetupMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 1;
ret = efi_set_variable_internal(L"AuditMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"DeployedMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
efi_secure_boot = true;
} else if (mode == EFI_MODE_USER) {
val = 1;
ret = efi_set_variable_internal(L"SecureBoot",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"SetupMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"AuditMode",
&efi_global_variable_guid,
attributes,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"DeployedMode",
&efi_global_variable_guid,
attributes,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
efi_secure_boot = true;
} else if (mode == EFI_MODE_SETUP) {
val = 0;
ret = efi_set_variable_internal(L"SecureBoot",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 1;
ret = efi_set_variable_internal(L"SetupMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"AuditMode",
&efi_global_variable_guid,
attributes,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
val = 0;
ret = efi_set_variable_internal(L"DeployedMode",
&efi_global_variable_guid,
attributes | READ_ONLY,
sizeof(val), &val,
false);
if (ret != EFI_SUCCESS)
goto err;
} else {
return EFI_INVALID_PARAMETER;
}
efi_secure_mode = mode;
return EFI_SUCCESS;
err:
/* TODO: What action should be taken here? */
printf("ERROR: Secure state transition failed\n");
return ret;
}
/**
* efi_init_secure_state - initialize secure boot state
*
* Return: EFI_SUCCESS on success, status code (negative) on error
*/
static efi_status_t efi_init_secure_state(void)
{
enum efi_secure_mode mode;
efi_uintn_t size;
efi_status_t ret;
/*
* TODO:
* Since there is currently no "platform-specific" installation
* method of Platform Key, we can't say if VendorKeys is 0 or 1
* precisely.
*/
size = 0;
ret = EFI_CALL(efi_get_variable(L"PK", &efi_global_variable_guid,
NULL, &size, NULL));
if (ret == EFI_BUFFER_TOO_SMALL) {
if (IS_ENABLED(CONFIG_EFI_SECURE_BOOT))
mode = EFI_MODE_USER;
else
mode = EFI_MODE_SETUP;
efi_vendor_keys = 0;
} else if (ret == EFI_NOT_FOUND) {
mode = EFI_MODE_SETUP;
efi_vendor_keys = 1;
} else {
goto err;
}
ret = efi_transfer_secure_state(mode);
if (ret == EFI_SUCCESS)
ret = efi_set_variable_internal(L"VendorKeys",
&efi_global_variable_guid,
EFI_VARIABLE_BOOTSERVICE_ACCESS
| EFI_VARIABLE_RUNTIME_ACCESS
| READ_ONLY,
sizeof(efi_vendor_keys),
&efi_vendor_keys,
false);
err:
return ret;
}
/**
* efi_secure_boot_enabled - return if secure boot is enabled or not
*
* Return: true if enabled, false if disabled
*/
bool efi_secure_boot_enabled(void)
{
return efi_secure_boot;
}
#ifdef CONFIG_EFI_SECURE_BOOT
static u8 pkcs7_hdr[] = {
/* SEQUENCE */
0x30, 0x82, 0x05, 0xc7,
/* OID: pkcs7-signedData */
0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x02,
/* Context Structured? */
0xa0, 0x82, 0x05, 0xb8,
};
/**
* efi_variable_parse_signature - parse a signature in variable
* @buf: Pointer to variable's value
* @buflen: Length of @buf
*
* Parse a signature embedded in variable's value and instantiate
* a pkcs7_message structure. Since pkcs7_parse_message() accepts only
* pkcs7's signedData, some header needed be prepended for correctly
* parsing authentication data, particularly for variable's.
*
* Return: Pointer to pkcs7_message structure on success, NULL on error
*/
static struct pkcs7_message *efi_variable_parse_signature(const void *buf,
size_t buflen)
{
u8 *ebuf;
size_t ebuflen, len;
struct pkcs7_message *msg;
/*
* This is the best assumption to check if the binary is
* already in a form of pkcs7's signedData.
*/
if (buflen > sizeof(pkcs7_hdr) &&
!memcmp(&((u8 *)buf)[4], &pkcs7_hdr[4], 11)) {
msg = pkcs7_parse_message(buf, buflen);
goto out;
}
/*
* Otherwise, we should add a dummy prefix sequence for pkcs7
* message parser to be able to process.
* NOTE: EDK2 also uses similar hack in WrapPkcs7Data()
* in CryptoPkg/Library/BaseCryptLib/Pk/CryptPkcs7VerifyCommon.c
* TODO:
* The header should be composed in a more refined manner.
*/
debug("Makeshift prefix added to authentication data\n");
ebuflen = sizeof(pkcs7_hdr) + buflen;
if (ebuflen <= 0x7f) {
debug("Data is too short\n");
return NULL;
}
ebuf = malloc(ebuflen);
if (!ebuf) {
debug("Out of memory\n");
return NULL;
}
memcpy(ebuf, pkcs7_hdr, sizeof(pkcs7_hdr));
memcpy(ebuf + sizeof(pkcs7_hdr), buf, buflen);
len = ebuflen - 4;
ebuf[2] = (len >> 8) & 0xff;
ebuf[3] = len & 0xff;
len = ebuflen - 0x13;
ebuf[0x11] = (len >> 8) & 0xff;
ebuf[0x12] = len & 0xff;
msg = pkcs7_parse_message(ebuf, ebuflen);
free(ebuf);
out:
if (IS_ERR(msg))
return NULL;
return msg;
}
/**
* efi_variable_authenticate - authenticate a variable
* @variable: Variable name in u16
* @vendor: Guid of variable
* @data_size: Size of @data
* @data: Pointer to variable's value
* @given_attr: Attributes to be given at SetVariable()
* @env_attr: Attributes that an existing variable holds
* @time: signed time that an existing variable holds
*
* Called by efi_set_variable() to verify that the input is correct.
* Will replace the given data pointer with another that points to
* the actual data to store in the internal memory.
* On success, @data and @data_size will be replaced with variable's
* actual data, excluding authentication data, and its size, and variable's
* attributes and signed time will also be returned in @env_attr and @time,
* respectively.
*
* Return: EFI_SUCCESS on success, status code (negative) on error
*/
static efi_status_t efi_variable_authenticate(u16 *variable,
const efi_guid_t *vendor,
efi_uintn_t *data_size,
const void **data, u32 given_attr,
u32 *env_attr, u64 *time)
{
const struct efi_variable_authentication_2 *auth;
struct efi_signature_store *truststore, *truststore2;
struct pkcs7_message *var_sig;
struct efi_image_regions *regs;
struct efi_time timestamp;
struct rtc_time tm;
u64 new_time;
efi_status_t ret;
var_sig = NULL;
truststore = NULL;
truststore2 = NULL;
regs = NULL;
ret = EFI_SECURITY_VIOLATION;
if (*data_size < sizeof(struct efi_variable_authentication_2))
goto err;
/* authentication data */
auth = *data;
if (*data_size < (sizeof(auth->time_stamp)
+ auth->auth_info.hdr.dwLength))
goto err;
if (guidcmp(&auth->auth_info.cert_type, &efi_guid_cert_type_pkcs7))
goto err;
*data += sizeof(auth->time_stamp) + auth->auth_info.hdr.dwLength;
*data_size -= (sizeof(auth->time_stamp)
+ auth->auth_info.hdr.dwLength);
memcpy(&timestamp, &auth->time_stamp, sizeof(timestamp));
memset(&tm, 0, sizeof(tm));
tm.tm_year = timestamp.year;
tm.tm_mon = timestamp.month;
tm.tm_mday = timestamp.day;
tm.tm_hour = timestamp.hour;
tm.tm_min = timestamp.minute;
tm.tm_sec = timestamp.second;
new_time = rtc_mktime(&tm);
if (!efi_secure_boot_enabled()) {
/* finished checking */
*time = new_time;
return EFI_SUCCESS;
}
if (new_time <= *time)
goto err;
/* data to be digested */
regs = calloc(sizeof(*regs) + sizeof(struct image_region) * 5, 1);
if (!regs)
goto err;
regs->max = 5;
efi_image_region_add(regs, (uint8_t *)variable,
(uint8_t *)variable
+ u16_strlen(variable) * sizeof(u16), 1);
efi_image_region_add(regs, (uint8_t *)vendor,
(uint8_t *)vendor + sizeof(*vendor), 1);
efi_image_region_add(regs, (uint8_t *)&given_attr,
(uint8_t *)&given_attr + sizeof(given_attr), 1);
efi_image_region_add(regs, (uint8_t *)&timestamp,
(uint8_t *)&timestamp + sizeof(timestamp), 1);
efi_image_region_add(regs, (uint8_t *)*data,
(uint8_t *)*data + *data_size, 1);
/* variable's signature list */
if (auth->auth_info.hdr.dwLength < sizeof(auth->auth_info))
goto err;
var_sig = efi_variable_parse_signature(auth->auth_info.cert_data,
auth->auth_info.hdr.dwLength
- sizeof(auth->auth_info));
if (IS_ERR(var_sig)) {
debug("Parsing variable's signature failed\n");
var_sig = NULL;
goto err;
}
/* signature database used for authentication */
if (u16_strcmp(variable, L"PK") == 0 ||
u16_strcmp(variable, L"KEK") == 0) {
/* with PK */
truststore = efi_sigstore_parse_sigdb(L"PK");
if (!truststore)
goto err;
} else if (u16_strcmp(variable, L"db") == 0 ||
u16_strcmp(variable, L"dbx") == 0) {
/* with PK and KEK */
truststore = efi_sigstore_parse_sigdb(L"KEK");
truststore2 = efi_sigstore_parse_sigdb(L"PK");
if (!truststore) {
if (!truststore2)
goto err;
truststore = truststore2;
truststore2 = NULL;
}
} else {
/* TODO: support private authenticated variables */
goto err;
}
/* verify signature */
if (efi_signature_verify_with_sigdb(regs, var_sig, truststore, NULL)) {
debug("Verified\n");
} else {
if (truststore2 &&
efi_signature_verify_with_sigdb(regs, var_sig,
truststore2, NULL)) {
debug("Verified\n");
} else {
debug("Verifying variable's signature failed\n");
goto err;
}
}
/* finished checking */
*time = rtc_mktime(&tm);
ret = EFI_SUCCESS;
err:
efi_sigstore_free(truststore);
efi_sigstore_free(truststore2);
pkcs7_free_message(var_sig);
free(regs);
return ret;
}
#else
static efi_status_t efi_variable_authenticate(u16 *variable,
const efi_guid_t *vendor,
efi_uintn_t *data_size,
const void **data, u32 given_attr,
u32 *env_attr, u64 *time)
{
return EFI_SUCCESS;
}
#endif /* CONFIG_EFI_SECURE_BOOT */
static
efi_status_t EFIAPI efi_get_variable_common(u16 *variable_name,
const efi_guid_t *vendor,
u32 *attributes,
efi_uintn_t *data_size, void *data,
bool is_non_volatile)
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
{
char *native_name;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
efi_status_t ret;
unsigned long in_size;
const char *val = NULL, *s;
u64 time = 0;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
u32 attr;
if (!variable_name || !vendor || !data_size)
return EFI_EXIT(EFI_INVALID_PARAMETER);
ret = efi_to_native(&native_name, variable_name, vendor);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (ret)
return ret;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
EFI_PRINT("get '%s'\n", native_name);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
val = env_get(native_name);
free(native_name);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (!val)
return EFI_NOT_FOUND;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
val = parse_attr(val, &attr, &time);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
in_size = *data_size;
if ((s = prefix(val, "(blob)"))) {
size_t len = strlen(s);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
/* number of hexadecimal digits must be even */
if (len & 1)
return EFI_DEVICE_ERROR;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
/* two characters per byte: */
len /= 2;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
*data_size = len;
if (in_size < len) {
ret = EFI_BUFFER_TOO_SMALL;
goto out;
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (!data) {
debug("Variable with no data shouldn't exist.\n");
return EFI_INVALID_PARAMETER;
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (hex2bin(data, s, len))
return EFI_DEVICE_ERROR;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
EFI_PRINT("got value: \"%s\"\n", s);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
} else if ((s = prefix(val, "(utf8)"))) {
unsigned len = strlen(s) + 1;
*data_size = len;
if (in_size < len) {
ret = EFI_BUFFER_TOO_SMALL;
goto out;
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (!data) {
debug("Variable with no data shouldn't exist.\n");
return EFI_INVALID_PARAMETER;
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
memcpy(data, s, len);
((char *)data)[len] = '\0';
EFI_PRINT("got value: \"%s\"\n", (char *)data);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
} else {
EFI_PRINT("invalid value: '%s'\n", val);
return EFI_DEVICE_ERROR;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
}
out:
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (attributes)
*attributes = attr & EFI_VARIABLE_MASK;
return ret;
}
static
efi_status_t EFIAPI efi_get_volatile_variable(u16 *variable_name,
const efi_guid_t *vendor,
u32 *attributes,
efi_uintn_t *data_size,
void *data)
{
return efi_get_variable_common(variable_name, vendor, attributes,
data_size, data, false);
}
efi_status_t EFIAPI efi_get_nonvolatile_variable(u16 *variable_name,
const efi_guid_t *vendor,
u32 *attributes,
efi_uintn_t *data_size,
void *data)
{
return efi_get_variable_common(variable_name, vendor, attributes,
data_size, data, true);
}
/**
* efi_efi_get_variable() - retrieve value of a UEFI variable
*
* This function implements the GetVariable runtime service.
*
* See the Unified Extensible Firmware Interface (UEFI) specification for
* details.
*
* @variable_name: name of the variable
* @vendor: vendor GUID
* @attributes: attributes of the variable
* @data_size: size of the buffer to which the variable value is copied
* @data: buffer to which the variable value is copied
* Return: status code
*/
efi_status_t EFIAPI efi_get_variable(u16 *variable_name,
const efi_guid_t *vendor, u32 *attributes,
efi_uintn_t *data_size, void *data)
{
efi_status_t ret;
EFI_ENTRY("\"%ls\" %pUl %p %p %p", variable_name, vendor, attributes,
data_size, data);
ret = efi_get_volatile_variable(variable_name, vendor, attributes,
data_size, data);
if (ret == EFI_NOT_FOUND)
ret = efi_get_nonvolatile_variable(variable_name, vendor,
attributes, data_size, data);
return EFI_EXIT(ret);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
}
static char *efi_variables_list;
static char *efi_cur_variable;
/**
* parse_uboot_variable() - parse a u-boot variable and get uefi-related
* information
* @variable: whole data of u-boot variable (ie. name=value)
* @variable_name_size: size of variable_name buffer in byte
* @variable_name: name of uefi variable in u16, null-terminated
* @vendor: vendor's guid
* @attributes: attributes
*
* A uefi variable is encoded into a u-boot variable as described above.
* This function parses such a u-boot variable and retrieve uefi-related
* information into respective parameters. In return, variable_name_size
* is the size of variable name including NULL.
*
* Return: EFI_SUCCESS if parsing is OK, EFI_NOT_FOUND when
* the entire variable list has been returned,
* otherwise non-zero status code
*/
static efi_status_t parse_uboot_variable(char *variable,
efi_uintn_t *variable_name_size,
u16 *variable_name,
const efi_guid_t *vendor,
u32 *attributes)
{
char *guid, *name, *end, c;
size_t name_len;
efi_uintn_t old_variable_name_size;
u64 time;
u16 *p;
guid = strchr(variable, '_');
if (!guid)
return EFI_INVALID_PARAMETER;
guid++;
name = strchr(guid, '_');
if (!name)
return EFI_INVALID_PARAMETER;
name++;
end = strchr(name, '=');
if (!end)
return EFI_INVALID_PARAMETER;
name_len = end - name;
old_variable_name_size = *variable_name_size;
*variable_name_size = sizeof(u16) * (name_len + 1);
if (old_variable_name_size < *variable_name_size)
return EFI_BUFFER_TOO_SMALL;
end++; /* point to value */
/* variable name */
p = variable_name;
utf8_utf16_strncpy(&p, name, name_len);
variable_name[name_len] = 0;
/* guid */
c = *(name - 1);
*(name - 1) = '\0'; /* guid need be null-terminated here */
uuid_str_to_bin(guid, (unsigned char *)vendor, UUID_STR_FORMAT_GUID);
*(name - 1) = c;
/* attributes */
parse_attr(end, attributes, &time);
return EFI_SUCCESS;
}
/**
* efi_get_next_variable_name() - enumerate the current variable names
*
* @variable_name_size: size of variable_name buffer in byte
* @variable_name: name of uefi variable's name in u16
* @vendor: vendor's guid
*
* This function implements the GetNextVariableName service.
*
* See the Unified Extensible Firmware Interface (UEFI) specification for
* details.
*
* Return: status code
*/
efi_status_t EFIAPI efi_get_next_variable_name(efi_uintn_t *variable_name_size,
u16 *variable_name,
efi_guid_t *vendor)
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
{
char *native_name, *variable;
ssize_t name_len, list_len;
char regex[256];
char * const regexlist[] = {regex};
u32 attributes;
int i;
efi_status_t ret;
EFI_ENTRY("%p \"%ls\" %pUl", variable_name_size, variable_name, vendor);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (!variable_name_size || !variable_name || !vendor)
return EFI_EXIT(EFI_INVALID_PARAMETER);
if (variable_name[0]) {
/* check null-terminated string */
for (i = 0; i < *variable_name_size; i++)
if (!variable_name[i])
break;
if (i >= *variable_name_size)
return EFI_EXIT(EFI_INVALID_PARAMETER);
/* search for the last-returned variable */
ret = efi_to_native(&native_name, variable_name, vendor);
if (ret)
return EFI_EXIT(ret);
name_len = strlen(native_name);
for (variable = efi_variables_list; variable && *variable;) {
if (!strncmp(variable, native_name, name_len) &&
variable[name_len] == '=')
break;
variable = strchr(variable, '\n');
if (variable)
variable++;
}
free(native_name);
if (!(variable && *variable))
return EFI_EXIT(EFI_INVALID_PARAMETER);
/* next variable */
variable = strchr(variable, '\n');
if (variable)
variable++;
if (!(variable && *variable))
return EFI_EXIT(EFI_NOT_FOUND);
} else {
/*
*new search: free a list used in the previous search
*/
free(efi_variables_list);
efi_variables_list = NULL;
efi_cur_variable = NULL;
snprintf(regex, 256, "efi_.*-.*-.*-.*-.*_.*");
list_len = hexport_r(&env_htab, '\n',
H_MATCH_REGEX | H_MATCH_KEY,
&efi_variables_list, 0, 1, regexlist);
if (list_len <= 1)
return EFI_EXIT(EFI_NOT_FOUND);
variable = efi_variables_list;
}
ret = parse_uboot_variable(variable, variable_name_size, variable_name,
vendor, &attributes);
return EFI_EXIT(ret);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
}
static
efi_status_t EFIAPI efi_set_variable_common(u16 *variable_name,
const efi_guid_t *vendor,
u32 attributes,
efi_uintn_t data_size,
const void *data,
bool ro_check,
bool is_non_volatile)
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
{
char *native_name = NULL, *old_data = NULL, *val = NULL, *s;
efi_uintn_t old_size;
bool append, delete;
u64 time = 0;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
u32 attr;
efi_status_t ret = EFI_SUCCESS;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
debug("%s: set '%s'\n", __func__, native_name);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (!variable_name || !*variable_name || !vendor ||
((attributes & EFI_VARIABLE_RUNTIME_ACCESS) &&
!(attributes & EFI_VARIABLE_BOOTSERVICE_ACCESS))) {
ret = EFI_INVALID_PARAMETER;
goto err;
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
ret = efi_to_native(&native_name, variable_name, vendor);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (ret)
goto err;
/* check if a variable exists */
old_size = 0;
attr = 0;
ret = EFI_CALL(efi_get_variable(variable_name, vendor, &attr,
&old_size, NULL));
if (ret == EFI_BUFFER_TOO_SMALL) {
if ((is_non_volatile && !(attr & EFI_VARIABLE_NON_VOLATILE)) ||
(!is_non_volatile && (attr & EFI_VARIABLE_NON_VOLATILE))) {
ret = EFI_INVALID_PARAMETER;
goto err;
}
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
append = !!(attributes & EFI_VARIABLE_APPEND_WRITE);
attributes &= ~(u32)EFI_VARIABLE_APPEND_WRITE;
delete = !append && (!data_size || !attributes);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
/* check attributes */
if (old_size) {
if (ro_check && (attr & READ_ONLY)) {
ret = EFI_WRITE_PROTECTED;
goto err;
}
/* attributes won't be changed */
if (!delete &&
((ro_check && attr != attributes) ||
(!ro_check && ((attr & ~(u32)READ_ONLY)
!= (attributes & ~(u32)READ_ONLY))))) {
ret = EFI_INVALID_PARAMETER;
goto err;
}
} else {
if (delete || append) {
/*
* Trying to delete or to update a non-existent
* variable.
*/
ret = EFI_NOT_FOUND;
goto err;
}
}
if (((!u16_strcmp(variable_name, L"PK") ||
!u16_strcmp(variable_name, L"KEK")) &&
!guidcmp(vendor, &efi_global_variable_guid)) ||
((!u16_strcmp(variable_name, L"db") ||
!u16_strcmp(variable_name, L"dbx")) &&
!guidcmp(vendor, &efi_guid_image_security_database))) {
/* authentication is mandatory */
if (!(attributes &
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)) {
debug("%ls: AUTHENTICATED_WRITE_ACCESS required\n",
variable_name);
ret = EFI_INVALID_PARAMETER;
goto err;
}
}
/* authenticate a variable */
if (IS_ENABLED(CONFIG_EFI_SECURE_BOOT)) {
if (attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS) {
ret = EFI_INVALID_PARAMETER;
goto err;
}
if (attributes &
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS) {
ret = efi_variable_authenticate(variable_name, vendor,
&data_size, &data,
attributes, &attr,
&time);
if (ret != EFI_SUCCESS)
goto err;
/* last chance to check for delete */
if (!data_size)
delete = true;
}
} else {
if (attributes &
(EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS |
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)) {
debug("Secure boot is not configured\n");
ret = EFI_INVALID_PARAMETER;
goto err;
}
}
/* delete a variable */
if (delete) {
/* !old_size case has been handled before */
val = NULL;
ret = EFI_SUCCESS;
goto out;
}
if (append) {
old_data = malloc(old_size);
if (!old_data) {
return EFI_OUT_OF_RESOURCES;
goto err;
}
ret = EFI_CALL(efi_get_variable(variable_name, vendor,
&attr, &old_size, old_data));
if (ret != EFI_SUCCESS)
goto err;
} else {
old_size = 0;
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
}
val = malloc(2 * old_size + 2 * data_size
+ strlen("{ro,run,boot,nv,time=0123456701234567}(blob)")
+ 1);
if (!val) {
ret = EFI_OUT_OF_RESOURCES;
goto err;
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
s = val;
/*
* store attributes
*/
attributes &= (READ_ONLY |
EFI_VARIABLE_NON_VOLATILE |
EFI_VARIABLE_BOOTSERVICE_ACCESS |
EFI_VARIABLE_RUNTIME_ACCESS |
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
s += sprintf(s, "{");
while (attributes) {
attr = 1 << (ffs(attributes) - 1);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
if (attr == READ_ONLY) {
s += sprintf(s, "ro");
} else if (attr == EFI_VARIABLE_NON_VOLATILE) {
s += sprintf(s, "nv");
} else if (attr == EFI_VARIABLE_BOOTSERVICE_ACCESS) {
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
s += sprintf(s, "boot");
} else if (attr == EFI_VARIABLE_RUNTIME_ACCESS) {
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
s += sprintf(s, "run");
} else if (attr ==
EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS) {
s += sprintf(s, "time=");
s = bin2hex(s, (u8 *)&time, sizeof(time));
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
attributes &= ~attr;
if (attributes)
s += sprintf(s, ",");
}
s += sprintf(s, "}");
s += sprintf(s, "(blob)");
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
/* store payload: */
if (append)
s = bin2hex(s, old_data, old_size);
s = bin2hex(s, data, data_size);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
*s = '\0';
EFI_PRINT("setting: %s=%s\n", native_name, val);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
out:
if (env_set(native_name, val)) {
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
ret = EFI_DEVICE_ERROR;
} else {
bool vendor_keys_modified = false;
if ((u16_strcmp(variable_name, L"PK") == 0 &&
guidcmp(vendor, &efi_global_variable_guid) == 0)) {
ret = efi_transfer_secure_state(
(delete ? EFI_MODE_SETUP :
EFI_MODE_USER));
if (ret != EFI_SUCCESS)
goto err;
if (efi_secure_mode != EFI_MODE_SETUP)
vendor_keys_modified = true;
} else if ((u16_strcmp(variable_name, L"KEK") == 0 &&
guidcmp(vendor, &efi_global_variable_guid) == 0)) {
if (efi_secure_mode != EFI_MODE_SETUP)
vendor_keys_modified = true;
}
/* update VendorKeys */
if (vendor_keys_modified & efi_vendor_keys) {
efi_vendor_keys = 0;
ret = efi_set_variable_internal(
L"VendorKeys",
&efi_global_variable_guid,
EFI_VARIABLE_BOOTSERVICE_ACCESS
| EFI_VARIABLE_RUNTIME_ACCESS
| READ_ONLY,
sizeof(efi_vendor_keys),
&efi_vendor_keys,
false);
} else {
ret = EFI_SUCCESS;
}
}
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
err:
free(native_name);
free(old_data);
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
free(val);
return ret;
}
static
efi_status_t EFIAPI efi_set_volatile_variable(u16 *variable_name,
const efi_guid_t *vendor,
u32 attributes,
efi_uintn_t data_size,
const void *data,
bool ro_check)
{
return efi_set_variable_common(variable_name, vendor, attributes,
data_size, data, ro_check, false);
}
efi_status_t EFIAPI efi_set_nonvolatile_variable(u16 *variable_name,
const efi_guid_t *vendor,
u32 attributes,
efi_uintn_t data_size,
const void *data,
bool ro_check)
{
efi_status_t ret;
ret = efi_set_variable_common(variable_name, vendor, attributes,
data_size, data, ro_check, true);
return ret;
}
static efi_status_t efi_set_variable_internal(u16 *variable_name,
const efi_guid_t *vendor,
u32 attributes,
efi_uintn_t data_size,
const void *data,
bool ro_check)
{
efi_status_t ret;
if (attributes & EFI_VARIABLE_NON_VOLATILE)
ret = efi_set_nonvolatile_variable(variable_name, vendor,
attributes,
data_size, data, ro_check);
else
ret = efi_set_volatile_variable(variable_name, vendor,
attributes, data_size, data,
ro_check);
return ret;
}
/**
* efi_set_variable() - set value of a UEFI variable
*
* This function implements the SetVariable runtime service.
*
* See the Unified Extensible Firmware Interface (UEFI) specification for
* details.
*
* @variable_name: name of the variable
* @vendor: vendor GUID
* @attributes: attributes of the variable
* @data_size: size of the buffer with the variable value
* @data: buffer with the variable value
* Return: status code
*/
efi_status_t EFIAPI efi_set_variable(u16 *variable_name,
const efi_guid_t *vendor, u32 attributes,
efi_uintn_t data_size, const void *data)
{
EFI_ENTRY("\"%ls\" %pUl %x %zu %p", variable_name, vendor, attributes,
data_size, data);
/* READ_ONLY bit is not part of API */
attributes &= ~(u32)READ_ONLY;
return EFI_EXIT(efi_set_variable_internal(variable_name, vendor,
attributes, data_size, data,
true));
efi_loader: efi variable support Add EFI variable support, mapping to u-boot environment variables. Variables are pretty important for setting up boot order, among other things. If the board supports saveenv, then it will be called in ExitBootServices() to persist variables set by the efi payload. (For example, fallback.efi configuring BootOrder and BootXXXX load-option variables.) Variables are *not* currently exposed at runtime, post ExitBootServices. On boards without a dedicated device for storage, which the loaded OS is not trying to also use, this is rather tricky. One idea, at least for boards that can persist RAM across reboot, is to keep a "journal" of modified variables in RAM, and then turn halt into a reboot into u-boot, plus store variables, plus halt. Whatever the solution, it likely involves some per-board support. Mapping between EFI variables and u-boot variables: efi_$guid_$varname = {attributes}(type)value For example: efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_OsIndicationsSupported= "{ro,boot,run}(blob)0000000000000000" efi_8be4df61-93ca-11d2-aa0d-00e098032b8c_BootOrder= "(blob)00010000" The attributes are a comma separated list of these possible attributes: + ro - read-only + boot - boot-services access + run - runtime access NOTE: with current implementation, no variables are available after ExitBootServices, and all are persisted (if possible). If not specified, the attributes default to "{boot}". The required type is one of: + utf8 - raw utf8 string + blob - arbitrary length hex string Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2017-09-14 07:05:37 +09:00
}
/**
* efi_query_variable_info() - get information about EFI variables
*
* This function implements the QueryVariableInfo() runtime service.
*
* See the Unified Extensible Firmware Interface (UEFI) specification for
* details.
*
* @attributes: bitmask to select variables to be
* queried
* @maximum_variable_storage_size: maximum size of storage area for the
* selected variable types
* @remaining_variable_storage_size: remaining size of storage are for the
* selected variable types
* @maximum_variable_size: maximum size of a variable of the
* selected type
* Returns: status code
*/
efi_status_t __efi_runtime EFIAPI efi_query_variable_info(
u32 attributes,
u64 *maximum_variable_storage_size,
u64 *remaining_variable_storage_size,
u64 *maximum_variable_size)
{
return EFI_UNSUPPORTED;
}
/**
* efi_get_variable_runtime() - runtime implementation of GetVariable()
*
* @variable_name: name of the variable
* @vendor: vendor GUID
* @attributes: attributes of the variable
* @data_size: size of the buffer to which the variable value is copied
* @data: buffer to which the variable value is copied
* Return: status code
*/
static efi_status_t __efi_runtime EFIAPI
efi_get_variable_runtime(u16 *variable_name, const efi_guid_t *vendor,
u32 *attributes, efi_uintn_t *data_size, void *data)
{
return EFI_UNSUPPORTED;
}
/**
* efi_get_next_variable_name_runtime() - runtime implementation of
* GetNextVariable()
*
* @variable_name_size: size of variable_name buffer in byte
* @variable_name: name of uefi variable's name in u16
* @vendor: vendor's guid
* Return: status code
*/
static efi_status_t __efi_runtime EFIAPI
efi_get_next_variable_name_runtime(efi_uintn_t *variable_name_size,
u16 *variable_name, efi_guid_t *vendor)
{
return EFI_UNSUPPORTED;
}
/**
* efi_set_variable_runtime() - runtime implementation of SetVariable()
*
* @variable_name: name of the variable
* @vendor: vendor GUID
* @attributes: attributes of the variable
* @data_size: size of the buffer with the variable value
* @data: buffer with the variable value
* Return: status code
*/
static efi_status_t __efi_runtime EFIAPI
efi_set_variable_runtime(u16 *variable_name, const efi_guid_t *vendor,
u32 attributes, efi_uintn_t data_size,
const void *data)
{
return EFI_UNSUPPORTED;
}
/**
* efi_variables_boot_exit_notify() - notify ExitBootServices() is called
*/
void efi_variables_boot_exit_notify(void)
{
efi_runtime_services.get_variable = efi_get_variable_runtime;
efi_runtime_services.get_next_variable_name =
efi_get_next_variable_name_runtime;
efi_runtime_services.set_variable = efi_set_variable_runtime;
efi_update_table_header_crc32(&efi_runtime_services.hdr);
}
/**
* efi_init_variables() - initialize variable services
*
* Return: status code
*/
efi_status_t efi_init_variables(void)
{
efi_status_t ret;
ret = efi_init_secure_state();
return ret;
}