u-boot-brain/board/freescale/common/pfuze.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright 2014 Freescale Semiconductor, Inc.
 */

#ifndef __PFUZE_BOARD_HELPER__
#define __PFUZE_BOARD_HELPER__

#ifdef CONFIG_DM_PMIC_PFUZE100
struct udevice *pfuze_common_init(void);
int pfuze_mode_init(struct udevice *dev, u32 mode);
#else
struct pmic *pfuze_common_init(unsigned char i2cbus);
int pfuze_mode_init(struct pmic *p, u32 mode);
#endif

#endif
SPDX: Convert all of our single license tags to Linux Kernel style When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> 2018-05-07 06:58:06 +09:00			`/* SPDX-License-Identifier: GPL-2.0+ */`
imx: mx6sabre common: Factorize the Pfuze init function Since the Pfuze initializations are similar on various mx6 SABRE boards. Factorize the initialization to a common function in file board/freescale/common/pfuze.c. So that all SABRE boards BSP can share the function. Signed-off-by: Ye.Li <B37916@freescale.com> 2014-11-06 17:28:59 +09:00			`/*`
			`* Copyright 2014 Freescale Semiconductor, Inc.`
			`*/`

			`#ifndef __PFUZE_BOARD_HELPER__`
			`#define __PFUZE_BOARD_HELPER__`

board: freescale: common: add pfuze dm code Add pfuze dm code, this code could be enabled with CONFIG_DM_PMIC_PFUZE100. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> 2018-01-02 10:32:06 +09:00			`#ifdef CONFIG_DM_PMIC_PFUZE100`
			`struct udevice *pfuze_common_init(void);`
			`int pfuze_mode_init(struct udevice *dev, u32 mode);`
			`#else`
imx: mx6sabre common: Factorize the Pfuze init function Since the Pfuze initializations are similar on various mx6 SABRE boards. Factorize the initialization to a common function in file board/freescale/common/pfuze.c. So that all SABRE boards BSP can share the function. Signed-off-by: Ye.Li <B37916@freescale.com> 2014-11-06 17:28:59 +09:00			`struct pmic *pfuze_common_init(unsigned char i2cbus);`
pmic:pfuze implement pmic_mode_init This patch is to implement pmic_mode_init function, and add prototype in header file. This function is to set switching mode for pmic buck regulators to improve system efficiency. Mode: OFF: The regulator is switched off and the output voltage is discharged. PFM: In this mode, the regulator is always in PFM mode, which is useful at light loads for optimized efficiency. PWM: In this mode, the regulator is always in PWM mode operation regardless of load conditions. APS: In this mode, the regulator moves automatically between pulse skipping mode and PWM mode depending on load conditions. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Acked-by: Przemyslaw Marczak <p.marczak@samsung.com> 2015-01-27 11:14:03 +09:00			`int pfuze_mode_init(struct pmic *p, u32 mode);`
board: freescale: common: add pfuze dm code Add pfuze dm code, this code could be enabled with CONFIG_DM_PMIC_PFUZE100. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> 2018-01-02 10:32:06 +09:00			`#endif`
imx: mx6sabre common: Factorize the Pfuze init function Since the Pfuze initializations are similar on various mx6 SABRE boards. Factorize the initialization to a common function in file board/freescale/common/pfuze.c. So that all SABRE boards BSP can share the function. Signed-off-by: Ye.Li <B37916@freescale.com> 2014-11-06 17:28:59 +09:00
			`#endif`