2018-05-07 06:58:06 +09:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
ARM: Add a new arch + board for QEMU's 'virt' machine
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:
qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
(Note that the 'highmem=off' parameter to the 'virt' machine is required for
PCI to work in U-Boot.) This command line enables the following:
- u-boot.bin loaded and executing in the emulated flash at address 0x0
- A generated device tree blob placed at the start of RAM
- A freely configurable amount of RAM, described by the DTB
- A PL011 serial port, discoverable via the DTB
- An ARMv7 architected timer
- PSCI for rebooting the system
- A generic ECAM-based PCI host controller, discoverable via the DTB
Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
The following ones are supported by both U-Boot and Linux:
- To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0
- To add an Intel E1000 network adapter, pass e.g.:
-net nic,model=e1000 -net user
- To add an EHCI-compliant USB host controller, pass e.g.:
-device usb-ehci,id=ehci
- To add a NVMe disk, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-20 05:18:07 +09:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2017 Tuomas Tynkkynen
|
|
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <fdtdec.h>
|
|
|
|
|
2018-01-11 23:11:23 +09:00
|
|
|
#ifdef CONFIG_ARM64
|
|
|
|
#include <asm/armv8/mmu.h>
|
|
|
|
|
|
|
|
static struct mm_region qemu_arm64_mem_map[] = {
|
|
|
|
{
|
|
|
|
/* Flash */
|
|
|
|
.virt = 0x00000000UL,
|
|
|
|
.phys = 0x00000000UL,
|
|
|
|
.size = 0x08000000UL,
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
|
|
PTE_BLOCK_INNER_SHARE
|
|
|
|
}, {
|
|
|
|
/* Peripherals */
|
|
|
|
.virt = 0x08000000UL,
|
|
|
|
.phys = 0x08000000UL,
|
|
|
|
.size = 0x38000000,
|
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
|
|
|
|
PTE_BLOCK_NON_SHARE |
|
|
|
|
PTE_BLOCK_PXN | PTE_BLOCK_UXN
|
|
|
|
}, {
|
|
|
|
/* RAM */
|
|
|
|
.virt = 0x40000000UL,
|
|
|
|
.phys = 0x40000000UL,
|
2018-05-15 00:47:51 +09:00
|
|
|
.size = 255UL * SZ_1G,
|
2018-01-11 23:11:23 +09:00
|
|
|
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
|
|
|
|
PTE_BLOCK_INNER_SHARE
|
|
|
|
}, {
|
|
|
|
/* List terminator */
|
|
|
|
0,
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
struct mm_region *mem_map = qemu_arm64_mem_map;
|
|
|
|
#endif
|
|
|
|
|
ARM: Add a new arch + board for QEMU's 'virt' machine
This board builds an U-Boot binary that is bootable with QEMU's 'virt'
machine on ARM. The minimal QEMU command line is:
qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
(Note that the 'highmem=off' parameter to the 'virt' machine is required for
PCI to work in U-Boot.) This command line enables the following:
- u-boot.bin loaded and executing in the emulated flash at address 0x0
- A generated device tree blob placed at the start of RAM
- A freely configurable amount of RAM, described by the DTB
- A PL011 serial port, discoverable via the DTB
- An ARMv7 architected timer
- PSCI for rebooting the system
- A generic ECAM-based PCI host controller, discoverable via the DTB
Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus.
The following ones are supported by both U-Boot and Linux:
- To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0
- To add an Intel E1000 network adapter, pass e.g.:
-net nic,model=e1000 -net user
- To add an EHCI-compliant USB host controller, pass e.g.:
-device usb-ehci,id=ehci
- To add a NVMe disk, pass e.g.:
-drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
2017-09-20 05:18:07 +09:00
|
|
|
int board_init(void)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dram_init(void)
|
|
|
|
{
|
|
|
|
if (fdtdec_setup_memory_size() != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dram_init_banksize(void)
|
|
|
|
{
|
|
|
|
fdtdec_setup_memory_banksize();
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *board_fdt_blob_setup(void)
|
|
|
|
{
|
|
|
|
/* QEMU loads a generated DTB for us at the start of RAM. */
|
|
|
|
return (void *)CONFIG_SYS_SDRAM_BASE;
|
|
|
|
}
|