u-boot-brain/arch/arm/dts/rockchip-u-boot.dtsi

// SPDX-License-Identifier: GPL-2.0+
/*
 * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
 */

#include <config.h>

/ {
	binman: binman {
		multiple-images;
	};
};

#ifdef CONFIG_SPL
&binman {
	simple-bin {
		filename = "u-boot-rockchip.bin";
		pad-byte = <0xff>;

		blob {
			filename = "idbloader.img";
		};

		u-boot-img {
			offset = <CONFIG_SPL_PAD_TO>;
		};
	};
};
#endif
rockchip: Add Single boot image (with binman, pad_cat) All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets. This patch creates a single boot image component using - binman, for arm32 rockchip platforms - pad_cat, for arm64 rockchip platforms. This would help users to get rid of burning different boot stage images. The new image called 'u-boot-rockchip.bin' which can burn into flash like: ₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet. Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Cc: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 2020-01-10 03:46:21 +09:00			`// SPDX-License-Identifier: GPL-2.0+`
			`/*`
			`* Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>`
			`*/`

			`#include <config.h>`

			`/ {`
rockchip: Enable building a SPI ROM image on jerry Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot produces a ROM for jerry. Change the binman image definition to support multiple images, since it may be used to build both u-boot-rockchip.bin and u-boot.rom Signed-off-by: Simon Glass <sjg@chromium.org> 2020-07-20 04:55:57 +09:00			`binman: binman {`
			`multiple-images;`
			`};`
			`};`

mediatek: Makefile: Drop explicit targets built by binman On mediatek various files that need to be created by binman. It does not make sense to enumerate these in the Makefile. They are described in the configuration (devicetree) for each board and we can simply run binman (always) to generate them. This avoid sprinkling the Makefile with arch-specific code. Also update the binman definition so that idbloader.img is only needed when SPL is actually being used. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> 2020-07-20 04:56:07 +09:00			`#ifdef CONFIG_SPL`
rockchip: Enable building a SPI ROM image on jerry Add a simple binman config and enable CONFIG_HAS_ROM so that U-Boot produces a ROM for jerry. Change the binman image definition to support multiple images, since it may be used to build both u-boot-rockchip.bin and u-boot.rom Signed-off-by: Simon Glass <sjg@chromium.org> 2020-07-20 04:55:57 +09:00			`&binman {`
			`simple-bin {`
rockchip: Add Single boot image (with binman, pad_cat) All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets. This patch creates a single boot image component using - binman, for arm32 rockchip platforms - pad_cat, for arm64 rockchip platforms. This would help users to get rid of burning different boot stage images. The new image called 'u-boot-rockchip.bin' which can burn into flash like: ₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet. Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com> Cc: Wadim Egorov <w.egorov@phytec.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 2020-01-10 03:46:21 +09:00			`filename = "u-boot-rockchip.bin";`
			`pad-byte = <0xff>;`

			`blob {`
			`filename = "idbloader.img";`
			`};`

			`u-boot-img {`
			`offset = <CONFIG_SPL_PAD_TO>;`
			`};`
			`};`
			`};`
mediatek: Makefile: Drop explicit targets built by binman On mediatek various files that need to be created by binman. It does not make sense to enumerate these in the Makefile. They are described in the configuration (devicetree) for each board and we can simply run binman (always) to generate them. This avoid sprinkling the Makefile with arch-specific code. Also update the binman definition so that idbloader.img is only needed when SPL is actually being used. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> 2020-07-20 04:56:07 +09:00			`#endif`