2013-04-25 19:16:03 +09:00
|
|
|
/*
|
2017-04-05 20:31:02 +09:00
|
|
|
* Aries M53 configuration
|
2013-04-25 19:16:03 +09:00
|
|
|
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
|
|
|
|
*
|
2013-10-07 20:07:26 +09:00
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
2013-04-25 19:16:03 +09:00
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __M53EVK_CONFIG_H__
|
|
|
|
#define __M53EVK_CONFIG_H__
|
|
|
|
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
|
|
|
|
#define CONFIG_REVISION_TAG
|
2015-10-26 20:47:42 +09:00
|
|
|
#define CONFIG_SYS_FSL_CLK
|
2013-04-25 19:16:03 +09:00
|
|
|
|
2014-06-26 18:01:30 +09:00
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
|
2013-04-25 19:16:03 +09:00
|
|
|
/*
|
|
|
|
* Memory configurations
|
|
|
|
*/
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
|
|
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
|
2014-03-28 16:31:01 +09:00
|
|
|
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
|
2013-04-25 19:16:03 +09:00
|
|
|
#define PHYS_SDRAM_2 CSD1_BASE_ADDR
|
2014-03-28 16:31:01 +09:00
|
|
|
#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
|
|
|
|
#define PHYS_SDRAM_SIZE (gd->ram_size)
|
2013-04-25 19:16:03 +09:00
|
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
arm: mx5: Fix memory slowness on M53EVK
Fix memory access slowness on i.MX53 M53EVK board. Let us inspect the
issue: First of all, the i.MX53 CPU has two memory banks mapped at
0x7000_0000 and 0xb000_0000 and each of those can hold up to 1GiB of
DRAM memory. Notice that the memory area is not continuous. On M53EVK,
each of the banks contain 512MiB of DRAM, which makes a total of 1GiB
of memory available to the system.
The problem is how the relocation of U-Boot is treated on i.MX53 . The
U-Boot is placed at the ((start of first DRAM partition) + (gd->ram_size)) .
This in turn poses a problem, since in our case, the gd->ram_size is 1GiB,
the first DRAM bank starts at 0x7000_0000 and contains 512MiB of memory.
Thus, with this algorithm, U-Boot is placed at offset:
0x7000_0000 + 1GiB - sizeof(u-boot and some small margin)
This is past the DRAM available in the first bank on M53EVK, but is still
within the address range of the first DRAM bank. Because of the memory
wrap-around, the data can still be read and written to this area, but the
access is much slower.
There were two ideas how to solve this problem, first was to map both of
the available DRAM chunks next to one another by using MMU, second was to
define CONFIG_VERY_BIG_RAM and CONFIG_MAX_MEM_MAPPED to size of the memory
in the first DRAM bank. We choose the later because it turns out the former
is not applicable afterall. The former cannot be used in case Linux kernel
was loaded into the second DRAM bank area, which would be remapped and one
would try booting the kernel, since at some point before the kernel is started,
the MMU would be turned off, which would destroy the mapping and hang the
system.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2014-03-28 16:31:00 +09:00
|
|
|
#define CONFIG_SYS_MEMTEST_END 0x8ff00000
|
2013-04-25 19:16:03 +09:00
|
|
|
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
|
|
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
|
|
|
|
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* U-Boot general configurations
|
|
|
|
*/
|
|
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
|
|
|
|
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
|
|
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
/* Boot argument buffer size */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Serial Driver
|
|
|
|
*/
|
|
|
|
#define CONFIG_MXC_UART
|
|
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MMC Driver
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
|
|
#define CONFIG_FSL_ESDHC
|
|
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* NAND
|
|
|
|
*/
|
|
|
|
#define CONFIG_ENV_SIZE (16 * 1024)
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
|
|
|
|
#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
|
|
|
|
#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_NAND_LARGEPAGE
|
|
|
|
#define CONFIG_MXC_NAND_HWECC
|
|
|
|
#define CONFIG_SYS_NAND_USE_FLASH_BBT
|
|
|
|
|
|
|
|
/* Environment is in NAND */
|
|
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
|
2014-06-26 18:01:31 +09:00
|
|
|
#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
|
|
|
|
#define CONFIG_ENV_OFFSET (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
|
2013-04-25 19:16:03 +09:00
|
|
|
#define CONFIG_ENV_OFFSET_REDUND \
|
|
|
|
(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
|
|
|
|
|
|
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
#define CONFIG_MTD_PARTITIONS
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Ethernet on SOC (FEC)
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
|
|
#define CONFIG_FEC_MXC
|
|
|
|
#define IMX_FEC_BASE FEC_BASE_ADDR
|
|
|
|
#define CONFIG_FEC_MXC_PHYADDR 0x0
|
|
|
|
#define CONFIG_MII
|
|
|
|
#define CONFIG_DISCOVER_PHY
|
|
|
|
#define CONFIG_FEC_XCV_TYPE RMII
|
2014-06-26 18:01:32 +09:00
|
|
|
#define CONFIG_ETHPRIME "FEC0"
|
2013-04-25 19:16:03 +09:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* I2C
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_I2C
|
2013-09-22 01:13:36 +09:00
|
|
|
#define CONFIG_SYS_I2C
|
|
|
|
#define CONFIG_SYS_I2C_MXC
|
2015-09-22 05:43:38 +09:00
|
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
2015-03-21 02:20:40 +09:00
|
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
2014-07-26 00:23:35 +09:00
|
|
|
#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
|
2013-04-25 19:16:03 +09:00
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* RTC
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
|
|
#define CONFIG_RTC_M41T62
|
|
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
|
|
#define CONFIG_SYS_M41T11_BASE_YEAR 2000
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* USB
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_USB
|
|
|
|
#define CONFIG_USB_EHCI_MX5
|
|
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* SATA
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_CMD_SATA
|
|
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
|
|
|
|
#define CONFIG_LBA48
|
|
|
|
#endif
|
|
|
|
|
2013-12-03 01:01:42 +09:00
|
|
|
/*
|
|
|
|
* LCD
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
|
|
#define CONFIG_VIDEO_IPUV3
|
|
|
|
#define CONFIG_VIDEO_BMP_RLE8
|
2014-06-26 18:01:30 +09:00
|
|
|
#define CONFIG_VIDEO_BMP_GZIP
|
2013-12-03 01:01:42 +09:00
|
|
|
#define CONFIG_SPLASH_SCREEN
|
2014-06-26 18:01:30 +09:00
|
|
|
#define CONFIG_SPLASHIMAGE_GUARD
|
|
|
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
2013-12-03 01:01:42 +09:00
|
|
|
#define CONFIG_BMP_16BPP
|
|
|
|
#define CONFIG_VIDEO_LOGO
|
2014-06-26 18:01:30 +09:00
|
|
|
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
|
2013-12-03 01:01:42 +09:00
|
|
|
#endif
|
|
|
|
|
2013-04-25 19:16:03 +09:00
|
|
|
/*
|
|
|
|
* Boot Linux
|
|
|
|
*/
|
|
|
|
#define CONFIG_CMDLINE_TAG
|
|
|
|
#define CONFIG_INITRD_TAG
|
|
|
|
#define CONFIG_REVISION_TAG
|
|
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
2014-06-26 18:01:32 +09:00
|
|
|
#define CONFIG_BOOTFILE "fitImage"
|
2013-04-25 19:16:03 +09:00
|
|
|
#define CONFIG_LOADADDR 0x70800000
|
2014-06-26 18:01:32 +09:00
|
|
|
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
|
2013-04-25 19:16:03 +09:00
|
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
|
|
|
|
/*
|
|
|
|
* NAND SPL
|
|
|
|
*/
|
|
|
|
#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
|
|
|
|
#define CONFIG_SPL_TEXT_BASE 0x70008000
|
|
|
|
#define CONFIG_SPL_PAD_TO 0x8000
|
|
|
|
#define CONFIG_SPL_STACK 0x70004000
|
|
|
|
|
|
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
|
|
#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
|
|
|
2014-06-26 18:01:32 +09:00
|
|
|
/*
|
|
|
|
* Extra Environments
|
|
|
|
*/
|
|
|
|
#define CONFIG_PREBOOT "run try_bootscript"
|
|
|
|
#define CONFIG_HOSTNAME m53evk
|
|
|
|
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
|
|
"consdev=ttymxc1\0" \
|
|
|
|
"baudrate=115200\0" \
|
|
|
|
"bootscript=boot.scr\0" \
|
|
|
|
"bootdev=/dev/mmcblk0p1\0" \
|
|
|
|
"rootdev=/dev/mmcblk0p2\0" \
|
|
|
|
"netdev=eth0\0" \
|
|
|
|
"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0" \
|
|
|
|
"kernel_addr_r=0x72000000\0" \
|
|
|
|
"addcons=" \
|
|
|
|
"setenv bootargs ${bootargs} " \
|
|
|
|
"console=${consdev},${baudrate}\0" \
|
|
|
|
"addip=" \
|
|
|
|
"setenv bootargs ${bootargs} " \
|
|
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
|
|
|
"${netmask}:${hostname}:${netdev}:off\0" \
|
|
|
|
"addmisc=" \
|
|
|
|
"setenv bootargs ${bootargs} ${miscargs}\0" \
|
|
|
|
"adddfltmtd=" \
|
|
|
|
"if test \"x${mtdparts}\" == \"x\" ; then " \
|
|
|
|
"mtdparts default ; " \
|
|
|
|
"fi\0" \
|
|
|
|
"addmtd=" \
|
|
|
|
"run adddfltmtd ; " \
|
|
|
|
"setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
|
|
"addargs=run addcons addmtd addmisc\0" \
|
|
|
|
"mmcload=" \
|
|
|
|
"mmc rescan ; " \
|
2014-09-23 20:18:21 +09:00
|
|
|
"load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
|
2014-06-26 18:01:32 +09:00
|
|
|
"ubiload=" \
|
|
|
|
"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
|
|
|
|
"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
|
|
|
|
"netload=" \
|
|
|
|
"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
|
|
|
|
"miscargs=nohlt panic=1\0" \
|
|
|
|
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
|
|
|
|
"ubiargs=" \
|
|
|
|
"setenv bootargs ubi.mtd=5 " \
|
|
|
|
"root=ubi0:rootfs rootfstype=ubifs\0" \
|
|
|
|
"nfsargs=" \
|
|
|
|
"setenv bootargs root=/dev/nfs rw " \
|
|
|
|
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
|
|
|
|
"mmc_mmc=" \
|
|
|
|
"run mmcload mmcargs addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"mmc_ubi=" \
|
|
|
|
"run mmcload ubiargs addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"mmc_nfs=" \
|
|
|
|
"run mmcload nfsargs addip addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"ubi_mmc=" \
|
|
|
|
"run ubiload mmcargs addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"ubi_ubi=" \
|
|
|
|
"run ubiload ubiargs addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"ubi_nfs=" \
|
|
|
|
"run ubiload nfsargs addip addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"net_mmc=" \
|
|
|
|
"run netload mmcargs addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"net_ubi=" \
|
|
|
|
"run netload ubiargs addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"net_nfs=" \
|
|
|
|
"run netload nfsargs addip addargs ; " \
|
|
|
|
"bootm ${kernel_addr_r}\0" \
|
|
|
|
"try_bootscript=" \
|
|
|
|
"mmc rescan;" \
|
2014-09-23 20:18:19 +09:00
|
|
|
"if test -e mmc 0:1 ${bootscript} ; then " \
|
2014-09-23 20:18:21 +09:00
|
|
|
"if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
|
2014-09-26 04:14:17 +09:00
|
|
|
"then ; " \
|
|
|
|
"echo Running bootscript... ; " \
|
|
|
|
"source ${kernel_addr_r} ; " \
|
2014-09-23 20:18:19 +09:00
|
|
|
"fi ; " \
|
2014-06-26 18:01:32 +09:00
|
|
|
"fi\0"
|
|
|
|
|
2013-04-25 19:16:03 +09:00
|
|
|
#endif /* __M53EVK_CONFIG_H__ */
|