2020-09-10 17:48:13 +09:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Amlogic GXL DWC3 Glue layer
|
|
|
|
*
|
|
|
|
* Copyright (C) 2019 BayLibre, SAS
|
|
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define DEBUG
|
|
|
|
#include <common.h>
|
|
|
|
#include <asm-generic/io.h>
|
|
|
|
#include <dm.h>
|
|
|
|
#include <dm/device-internal.h>
|
|
|
|
#include <dm/lists.h>
|
|
|
|
#include <dwc3-uboot.h>
|
|
|
|
#include <generic-phy.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include <malloc.h>
|
|
|
|
#include <regmap.h>
|
|
|
|
#include <usb.h>
|
|
|
|
#include "core.h"
|
|
|
|
#include "gadget.h"
|
|
|
|
#include <reset.h>
|
|
|
|
#include <clk.h>
|
|
|
|
#include <power/regulator.h>
|
|
|
|
#include <linux/bitfield.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/compat.h>
|
|
|
|
#include <asm/arch/usb-gx.h>
|
|
|
|
|
|
|
|
/* USB Glue Control Registers */
|
|
|
|
|
|
|
|
#define USB_R0 0x00
|
|
|
|
#define USB_R0_P30_FSEL_MASK GENMASK(5, 0)
|
|
|
|
#define USB_R0_P30_PHY_RESET BIT(6)
|
|
|
|
#define USB_R0_P30_TEST_POWERDOWN_HSP BIT(7)
|
|
|
|
#define USB_R0_P30_TEST_POWERDOWN_SSP BIT(8)
|
|
|
|
#define USB_R0_P30_ACJT_LEVEL_MASK GENMASK(13, 9)
|
|
|
|
#define USB_R0_P30_TX_BOOST_LEVEL_MASK GENMASK(16, 14)
|
|
|
|
#define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
|
|
|
|
#define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
|
|
|
|
#define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
|
|
|
|
#define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
|
|
|
|
#define USB_R0_U2D_ACT BIT(31)
|
|
|
|
|
|
|
|
#define USB_R1 0x04
|
|
|
|
#define USB_R1_U3H_BIGENDIAN_GS BIT(0)
|
|
|
|
#define USB_R1_U3H_PME_ENABLE BIT(1)
|
|
|
|
#define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(6, 2)
|
|
|
|
#define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(11, 7)
|
|
|
|
#define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(15, 12)
|
|
|
|
#define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
|
|
|
|
#define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
|
|
|
|
#define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
|
|
|
|
#define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
|
|
|
|
#define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
|
|
|
|
|
|
|
|
#define USB_R2 0x08
|
|
|
|
#define USB_R2_P30_CR_DATA_IN_MASK GENMASK(15, 0)
|
|
|
|
#define USB_R2_P30_CR_READ BIT(16)
|
|
|
|
#define USB_R2_P30_CR_WRITE BIT(17)
|
|
|
|
#define USB_R2_P30_CR_CAP_ADDR BIT(18)
|
|
|
|
#define USB_R2_P30_CR_CAP_DATA BIT(19)
|
|
|
|
#define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
|
|
|
|
#define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
|
|
|
|
|
|
|
|
#define USB_R3 0x0c
|
|
|
|
#define USB_R3_P30_SSC_ENABLE BIT(0)
|
|
|
|
#define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
|
|
|
|
#define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
|
|
|
|
#define USB_R3_P30_REF_SSP_EN BIT(13)
|
|
|
|
#define USB_R3_P30_LOS_BIAS_MASK GENMASK(18, 16)
|
|
|
|
#define USB_R3_P30_LOS_LEVEL_MASK GENMASK(23, 19)
|
|
|
|
#define USB_R3_P30_MPLL_MULTIPLIER_MASK GENMASK(30, 24)
|
|
|
|
|
|
|
|
#define USB_R4 0x10
|
|
|
|
#define USB_R4_P21_PORT_RESET_0 BIT(0)
|
|
|
|
#define USB_R4_P21_SLEEP_M0 BIT(1)
|
|
|
|
#define USB_R4_MEM_PD_MASK GENMASK(3, 2)
|
|
|
|
#define USB_R4_P21_ONLY BIT(4)
|
|
|
|
|
|
|
|
#define USB_R5 0x14
|
|
|
|
#define USB_R5_ID_DIG_SYNC BIT(0)
|
|
|
|
#define USB_R5_ID_DIG_REG BIT(1)
|
|
|
|
#define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
|
|
|
|
#define USB_R5_ID_DIG_EN_0 BIT(4)
|
|
|
|
#define USB_R5_ID_DIG_EN_1 BIT(5)
|
|
|
|
#define USB_R5_ID_DIG_CURR BIT(6)
|
|
|
|
#define USB_R5_ID_DIG_IRQ BIT(7)
|
|
|
|
#define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
|
|
|
|
#define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
|
|
|
|
|
|
|
|
/* read-only register */
|
|
|
|
#define USB_R6 0x18
|
|
|
|
#define USB_R6_P30_CR_DATA_OUT_MASK GENMASK(15, 0)
|
|
|
|
#define USB_R6_P30_CR_ACK BIT(16)
|
|
|
|
|
|
|
|
enum {
|
|
|
|
USB2_HOST_PHY0 = 0,
|
|
|
|
USB2_OTG_PHY1,
|
|
|
|
USB2_HOST_PHY2,
|
|
|
|
PHY_COUNT,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const char *phy_names[PHY_COUNT] = {
|
|
|
|
"usb2-phy0", "usb2-phy1", "usb2-phy2",
|
|
|
|
};
|
|
|
|
|
|
|
|
struct dwc3_meson_gxl {
|
|
|
|
struct udevice *dev;
|
|
|
|
struct regmap *regmap;
|
|
|
|
struct clk clk;
|
|
|
|
struct reset_ctl reset;
|
|
|
|
struct phy phys[PHY_COUNT];
|
|
|
|
enum usb_dr_mode otg_mode;
|
|
|
|
enum usb_dr_mode otg_phy_mode;
|
|
|
|
unsigned int usb2_ports;
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
|
|
struct udevice *vbus_supply;
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
#define U2P_REG_SIZE 0x20
|
|
|
|
#define USB_REG_OFFSET 0x80
|
|
|
|
|
|
|
|
#define USB2_OTG_PHY USB2_OTG_PHY1
|
|
|
|
|
|
|
|
static void dwc3_meson_gxl_usb2_set_mode(struct dwc3_meson_gxl *priv, enum usb_dr_mode mode)
|
|
|
|
{
|
|
|
|
switch (mode) {
|
|
|
|
case USB_DR_MODE_HOST:
|
|
|
|
case USB_DR_MODE_OTG:
|
|
|
|
case USB_DR_MODE_UNKNOWN:
|
|
|
|
regmap_update_bits(priv->regmap, USB_R1,
|
|
|
|
USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK, 0);
|
|
|
|
regmap_update_bits(priv->regmap, USB_R0,
|
|
|
|
USB_R0_U2D_ACT, 0);
|
|
|
|
regmap_update_bits(priv->regmap, USB_R4,
|
|
|
|
USB_R4_P21_SLEEP_M0, 0);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case USB_DR_MODE_PERIPHERAL:
|
|
|
|
regmap_update_bits(priv->regmap, USB_R0,
|
|
|
|
USB_R0_U2D_ACT, USB_R0_U2D_ACT);
|
|
|
|
regmap_update_bits(priv->regmap, USB_R0,
|
|
|
|
USB_R0_U2D_SS_SCALEDOWN_MODE_MASK, 0);
|
|
|
|
regmap_update_bits(priv->regmap, USB_R4,
|
|
|
|
USB_R4_P21_SLEEP_M0, USB_R4_P21_SLEEP_M0);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_usb2_init(struct dwc3_meson_gxl *priv)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < PHY_COUNT; ++i) {
|
|
|
|
if (!priv->phys[i].dev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
phy_meson_gxl_usb2_set_mode(&priv->phys[i],
|
|
|
|
(i == USB2_OTG_PHY) ? USB_DR_MODE_PERIPHERAL
|
|
|
|
: USB_DR_MODE_HOST);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_usb_init(struct dwc3_meson_gxl *priv)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = dwc3_meson_gxl_usb2_init(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
regmap_update_bits(priv->regmap, USB_R1,
|
|
|
|
USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
|
|
|
|
FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
|
|
|
|
|
|
|
|
regmap_update_bits(priv->regmap, USB_R5,
|
|
|
|
USB_R5_ID_DIG_EN_0,
|
|
|
|
USB_R5_ID_DIG_EN_0);
|
|
|
|
regmap_update_bits(priv->regmap, USB_R5,
|
|
|
|
USB_R5_ID_DIG_EN_1,
|
|
|
|
USB_R5_ID_DIG_EN_1);
|
|
|
|
regmap_update_bits(priv->regmap, USB_R5,
|
|
|
|
USB_R5_ID_DIG_TH_MASK,
|
|
|
|
FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
|
|
|
|
|
|
|
|
dwc3_meson_gxl_usb2_set_mode(priv, priv->otg_phy_mode);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int dwc3_meson_gxl_force_mode(struct udevice *dev, enum usb_dr_mode mode)
|
|
|
|
{
|
2020-12-04 08:55:20 +09:00
|
|
|
struct dwc3_meson_gxl *priv = dev_get_plat(dev);
|
2020-09-10 17:48:13 +09:00
|
|
|
|
|
|
|
if (!priv)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (mode != USB_DR_MODE_HOST && mode != USB_DR_MODE_PERIPHERAL)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!priv->phys[USB2_OTG_PHY].dev)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (mode == priv->otg_phy_mode)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (mode == USB_DR_MODE_HOST)
|
|
|
|
debug("%s: switching to Host Mode\n", __func__);
|
|
|
|
else
|
|
|
|
debug("%s: switching to Device Mode\n", __func__);
|
|
|
|
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
|
|
if (priv->vbus_supply) {
|
|
|
|
int ret = regulator_set_enable(priv->vbus_supply,
|
|
|
|
(mode == USB_DR_MODE_PERIPHERAL));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
priv->otg_phy_mode = mode;
|
|
|
|
|
|
|
|
phy_meson_gxl_usb2_set_mode(&priv->phys[USB2_OTG_PHY], mode);
|
|
|
|
|
|
|
|
dwc3_meson_gxl_usb2_set_mode(priv, mode);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_get_phys(struct dwc3_meson_gxl *priv)
|
|
|
|
{
|
|
|
|
int i, ret;
|
|
|
|
|
|
|
|
for (i = 0 ; i < PHY_COUNT ; ++i) {
|
|
|
|
ret = generic_phy_get_by_name(priv->dev, phy_names[i],
|
|
|
|
&priv->phys[i]);
|
|
|
|
if (ret == -ENOENT || ret == -ENODATA) {
|
|
|
|
priv->phys[i].dev = NULL;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
priv->usb2_ports++;
|
|
|
|
}
|
|
|
|
|
|
|
|
debug("%s: usb2 ports: %d\n", __func__, priv->usb2_ports);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_reset_init(struct dwc3_meson_gxl *priv)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = reset_get_by_index(priv->dev, 0, &priv->reset);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = reset_assert(&priv->reset);
|
|
|
|
udelay(1);
|
|
|
|
ret |= reset_deassert(&priv->reset);
|
|
|
|
if (ret) {
|
|
|
|
reset_free(&priv->reset);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_clk_init(struct dwc3_meson_gxl *priv)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = clk_get_by_index(priv->dev, 0, &priv->clk);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
|
|
if (ret) {
|
|
|
|
clk_free(&priv->clk);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_probe(struct udevice *dev)
|
|
|
|
{
|
2020-12-04 08:55:20 +09:00
|
|
|
struct dwc3_meson_gxl *priv = dev_get_plat(dev);
|
2020-09-10 17:48:13 +09:00
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
priv->dev = dev;
|
|
|
|
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = dwc3_meson_gxl_clk_init(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = dwc3_meson_gxl_reset_init(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = dwc3_meson_gxl_get_phys(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
#if CONFIG_IS_ENABLED(DM_REGULATOR)
|
|
|
|
ret = device_get_supply_regulator(dev, "vbus-supply",
|
|
|
|
&priv->vbus_supply);
|
|
|
|
if (ret && ret != -ENOENT) {
|
|
|
|
pr_err("Failed to get PHY regulator\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->vbus_supply) {
|
|
|
|
ret = regulator_set_enable(priv->vbus_supply, true);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* On GXL PHY must be started in device mode for DWC2 init */
|
|
|
|
priv->otg_mode = USB_DR_MODE_PERIPHERAL;
|
|
|
|
|
|
|
|
ret = dwc3_meson_gxl_usb_init(priv);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
priv->otg_mode = usb_get_dr_mode(dev->node);
|
|
|
|
|
|
|
|
if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
|
|
|
|
priv->otg_phy_mode = USB_DR_MODE_PERIPHERAL;
|
|
|
|
else
|
|
|
|
priv->otg_phy_mode = USB_DR_MODE_HOST;
|
|
|
|
|
|
|
|
for (i = 0 ; i < PHY_COUNT ; ++i) {
|
|
|
|
if (!priv->phys[i].dev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = generic_phy_init(&priv->phys[i]);
|
|
|
|
if (ret)
|
|
|
|
goto err_phy_init;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < PHY_COUNT; ++i) {
|
|
|
|
if (!priv->phys[i].dev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = generic_phy_power_on(&priv->phys[i]);
|
|
|
|
if (ret)
|
|
|
|
goto err_phy_init;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (priv->phys[USB2_OTG_PHY].dev)
|
|
|
|
phy_meson_gxl_usb2_set_mode(&priv->phys[USB2_OTG_PHY],
|
|
|
|
priv->otg_phy_mode);
|
|
|
|
|
|
|
|
dwc3_meson_gxl_usb2_set_mode(priv, priv->otg_phy_mode);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_phy_init:
|
|
|
|
for (i = 0 ; i < PHY_COUNT ; ++i) {
|
|
|
|
if (!priv->phys[i].dev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
generic_phy_exit(&priv->phys[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int dwc3_meson_gxl_remove(struct udevice *dev)
|
|
|
|
{
|
2020-12-04 08:55:20 +09:00
|
|
|
struct dwc3_meson_gxl *priv = dev_get_plat(dev);
|
2020-09-10 17:48:13 +09:00
|
|
|
int i;
|
|
|
|
|
|
|
|
reset_release_all(&priv->reset, 1);
|
|
|
|
|
|
|
|
clk_release_all(&priv->clk, 1);
|
|
|
|
|
|
|
|
for (i = 0; i < PHY_COUNT; ++i) {
|
|
|
|
if (!priv->phys[i].dev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
generic_phy_power_off(&priv->phys[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0 ; i < PHY_COUNT ; ++i) {
|
|
|
|
if (!priv->phys[i].dev)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
generic_phy_exit(&priv->phys[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
return dm_scan_fdt_dev(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct udevice_id dwc3_meson_gxl_ids[] = {
|
|
|
|
{ .compatible = "amlogic,meson-gxl-usb-ctrl" },
|
|
|
|
{ .compatible = "amlogic,meson-gxm-usb-ctrl" },
|
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
U_BOOT_DRIVER(dwc3_generic_wrapper) = {
|
|
|
|
.name = "dwc3-meson-gxl",
|
|
|
|
.id = UCLASS_SIMPLE_BUS,
|
|
|
|
.of_match = dwc3_meson_gxl_ids,
|
|
|
|
.probe = dwc3_meson_gxl_probe,
|
|
|
|
.remove = dwc3_meson_gxl_remove,
|
2020-12-04 08:55:18 +09:00
|
|
|
.plat_auto = sizeof(struct dwc3_meson_gxl),
|
2020-09-10 17:48:13 +09:00
|
|
|
|
|
|
|
};
|