u-boot-brain/arch/mips/dts/mrvl,cn73xx.dtsi

// SPDX-License-Identifier: GPL-2.0+
/*
 * Marvell / Cavium Inc. CN73xx
 */

/dts-v1/;

#include <dt-bindings/clock/octeon-clock.h>

/ {
	#address-cells = <2>;
	#size-cells = <2>;

	soc0: soc@0 {
		interrupt-parent = <&ciu3>;
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges; /* Direct mapping */

		ciu3: interrupt-controller@1010000000000 {
			compatible = "cavium,octeon-7890-ciu3";
			interrupt-controller;
			/*
			 * Interrupts are specified by two parts:
			 * 1) Source number (20 significant bits)
			 * 2) Trigger type: (4 == level, 1 == edge)
			 */
			#address-cells = <0>;
			#interrupt-cells = <2>;
			reg = <0x10100 0x00000000 0x0 0xb0000000>;
		};

		bootbus: bootbus@1180000000000 {
			compatible = "cavium,octeon-3860-bootbus","simple-bus";
			reg = <0x11800 0x00000000 0x0 0x200>;
			/* The chip select number and offset */
			#address-cells = <2>;
			/* The size of the chip select region */
			#size-cells = <1>;
		};

		clk: clock {
			compatible = "mrvl,octeon-clk";
			#clock-cells = <1>;
			u-boot,dm-pre-reloc;
		};

		gpio: gpio-controller@1070000000800 {
			#gpio-cells = <2>;
			compatible = "cavium,octeon-7890-gpio";
			reg = <0x10700 0x00000800 0x0 0x100>;
			gpio-controller;
			nr-gpios = <32>;
			/* Interrupts are specified by two parts:
			 * 1) GPIO pin number (0..15)
			 * 2) Triggering (1 - edge rising
			 *		  2 - edge falling
			 *		  4 - level active high
			 *		  8 - level active low)
			 */
			interrupt-controller;
			#interrupt-cells = <2>;
			/* The GPIO pins connect to 16 consecutive CUI bits */
			interrupts = <0x03000 4>, <0x03001 4>,
				     <0x03002 4>, <0x03003 4>,
				     <0x03004 4>, <0x03005 4>,
				     <0x03006 4>, <0x03007 4>,
				     <0x03008 4>, <0x03009 4>,
				     <0x0300a 4>, <0x0300b 4>,
				     <0x0300c 4>, <0x0300d 4>,
				     <0x0300e 4>, <0x0300f 4>;
		};

		reset: reset@1180006001600 {
			compatible = "mrvl,cn7xxx-rst";
			reg = <0x11800 0x06001600 0x0 0x200>;
		};

		uart0: serial@1180000000800 {
			compatible = "cavium,octeon-3860-uart","ns16550";
			reg = <0x11800 0x00000800 0x0 0x400>;
			clock-frequency = <0>;
			current-speed = <115200>;
			reg-shift = <3>;
			interrupts = <0x08000 4>;
		};

		uart1: serial@1180000000c00 {
			compatible = "cavium,octeon-3860-uart","ns16550";
			reg = <0x11800 0x00000c00 0x0 0x400>;
			clock-frequency = <0>;
			current-speed = <115200>;
			reg-shift = <3>;
			interrupts = <0x08040 4>;
		};

		i2c0: i2c@1180000001000 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "cavium,octeon-7890-twsi";
			reg = <0x11800 0x00001000 0x0 0x200>;
			/* INT_ST, INT_TS, INT_CORE */
			interrupts = <0x0b000 1>, <0x0b001 1>, <0x0b002 1>;
			clock-frequency = <100000>;
			clocks = <&clk OCTEON_CLK_IO>;
		};

		i2c1: i2c@1180000001200 {
			#address-cells = <1>;
			#size-cells = <0>;
			compatible = "cavium,octeon-7890-twsi";
			reg = <0x11800 0x00001200 0x0 0x200>;
			/* INT_ST, INT_TS, INT_CORE */
			interrupts = <0x0b100 1>, <0x0b101 1>, <0x0b102 1>;
			clock-frequency = <100000>;
			clocks = <&clk OCTEON_CLK_IO>;
		};
	};
};