mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 04:48:52 +09:00
36 lines
1.2 KiB
Plaintext
36 lines
1.2 KiB
Plaintext
![]() |
Altera QUADSPI driver
|
||
|
|
||
|
Required properties:
|
||
|
- compatible: Should be "altr,quadspi-1.0"
|
||
|
- reg: Address and length of the register set for the device. It contains
|
||
|
the information of registers in the same order as described by reg-names
|
||
|
- reg-names: Should contain the reg names
|
||
|
"avl_csr": Should contain the register configuration base address
|
||
|
"avl_mem": Should contain the data base address
|
||
|
- #address-cells: Must be <1>.
|
||
|
- #size-cells: Must be <0>.
|
||
|
- flash device tree subnode, there must be a node with the following fields:
|
||
|
- compatible: Should contain the flash name:
|
||
|
1. EPCS: epcs16, epcs64, epcs128
|
||
|
2. EPCQ: epcq16, epcq32, epcq64, epcq128, epcq256, epcq512, epcq1024
|
||
|
3. EPCQ-L: epcql256, epcql512, epcql1024
|
||
|
- #address-cells: please refer to /mtd/partition.txt
|
||
|
- #size-cells: please refer to /mtd/partition.txt
|
||
|
For partitions inside each flash, please refer to /mtd/partition.txt
|
||
|
|
||
|
Example:
|
||
|
|
||
|
quadspi_controller_0: quadspi@0x180014a0 {
|
||
|
compatible = "altr,quadspi-1.0";
|
||
|
reg = <0x180014a0 0x00000020>,
|
||
|
<0x14000000 0x04000000>;
|
||
|
reg-names = "avl_csr", "avl_mem";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
flash0: epcq512@0 {
|
||
|
compatible = "altr,epcq512";
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <1>;
|
||
|
};
|
||
|
};
|