sun7i: Add defconfig for the Itead Ibox
Add defconfig for the multi board device based on the
Allwinner A20 SoC. It contains the A20 Itead Core module and a
base board for the external interfaces.
The core module comes with 4GB NAND and 1GB DDR RAM.
The base board to which the core board is connected provides
3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet
port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This
header expands the features of core board by exposing the VGA pins,
audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power..
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-16 02:47:39 +09:00
|
|
|
CONFIG_ARM=y
|
|
|
|
CONFIG_ARCH_SUNXI=y
|
|
|
|
CONFIG_MACH_SUN7I=y
|
|
|
|
CONFIG_DRAM_CLK=480
|
|
|
|
CONFIG_MMC0_CD_PIN="PH1"
|
|
|
|
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-itead-ibox"
|
|
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
|
|
CONFIG_SPL=y
|
|
|
|
CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
|
2016-04-22 10:37:19 +09:00
|
|
|
CONFIG_HUSH_PARSER=y
|
sun7i: Add defconfig for the Itead Ibox
Add defconfig for the multi board device based on the
Allwinner A20 SoC. It contains the A20 Itead Core module and a
base board for the external interfaces.
The core module comes with 4GB NAND and 1GB DDR RAM.
The base board to which the core board is connected provides
3 USB 2.0 Host ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet
port, HDMI, IR receiver, SPDIF and a 32-pin GPIO header. This
header expands the features of core board by exposing the VGA pins,
audio In/Out pins, SATA, SPI, I2C, UARTS, USB-OTG and power..
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-03-16 02:47:39 +09:00
|
|
|
# CONFIG_CMD_IMLS is not set
|
|
|
|
# CONFIG_CMD_FLASH is not set
|
|
|
|
# CONFIG_CMD_FPGA is not set
|
|
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
|
|
CONFIG_USB_EHCI_HCD=y
|