mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-15 14:43:49 +09:00
212 lines
7.1 KiB
C
212 lines
7.1 KiB
C
![]() |
/*
|
||
|
* Authors: Xiangfu Liu <xiangfu.z@gmail.com>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License
|
||
|
* as published by the Free Software Foundation; either version
|
||
|
* 3 of the License, or (at your option) any later version.
|
||
|
*/
|
||
|
|
||
|
#ifndef __CONFIG_QI_LB60_H
|
||
|
#define __CONFIG_QI_LB60_H
|
||
|
|
||
|
#define CONFIG_MIPS32 /* MIPS32 CPU core */
|
||
|
#define CONFIG_JZSOC /* Jz SoC */
|
||
|
#define CONFIG_JZ4740 /* Jz4740 SoC */
|
||
|
#define CONFIG_NAND_JZ4740
|
||
|
|
||
|
#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
|
||
|
#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
|
||
|
#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
|
||
|
#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
|
||
|
|
||
|
#define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */
|
||
|
#define CONFIG_BAUDRATE 57600
|
||
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
||
|
|
||
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||
|
#define CONFIG_BOARD_EARLY_INIT_F
|
||
|
#define CONFIG_SYS_NO_FLASH
|
||
|
#define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */
|
||
|
#define CONFIG_ENV_OVERWRITE
|
||
|
|
||
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
|
||
|
#define CONFIG_BOOTDELAY 0
|
||
|
#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
|
||
|
#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
|
||
|
|
||
|
/*
|
||
|
* Command line configuration.
|
||
|
*/
|
||
|
#define CONFIG_CMD_BOOTD /* bootd */
|
||
|
#define CONFIG_CMD_CONSOLE /* coninfo */
|
||
|
#define CONFIG_CMD_ECHO /* echo arguments */
|
||
|
|
||
|
#define CONFIG_CMD_LOADB /* loadb */
|
||
|
#define CONFIG_CMD_LOADS /* loads */
|
||
|
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
|
||
|
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
|
||
|
#define CONFIG_CMD_RUN /* run command in env variable */
|
||
|
#define CONFIG_CMD_SAVEENV /* saveenv */
|
||
|
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
|
||
|
#define CONFIG_CMD_SOURCE /* "source" command support */
|
||
|
#define CONFIG_CMD_NAND
|
||
|
|
||
|
/*
|
||
|
* Serial download configuration
|
||
|
*/
|
||
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||
|
|
||
|
/*
|
||
|
* Miscellaneous configurable options
|
||
|
*/
|
||
|
#define CONFIG_SYS_MAXARGS 16
|
||
|
#define CONFIG_SYS_LONGHELP
|
||
|
#define CONFIG_SYS_PROMPT "NanoNote# "
|
||
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||
|
|
||
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||
|
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
|
||
|
|
||
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
|
||
|
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
|
||
|
#define CONFIG_SYS_LOAD_ADDR 0x80600000
|
||
|
#define CONFIG_SYS_MEMTEST_START 0x80100000
|
||
|
#define CONFIG_SYS_MEMTEST_END 0x80800000
|
||
|
|
||
|
/*
|
||
|
* Environment
|
||
|
*/
|
||
|
#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */
|
||
|
|
||
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||
|
/*
|
||
|
* if board nand flash is 1GB, set to 1
|
||
|
* if board nand flash is 2GB, set to 2
|
||
|
* for change the PAGE_SIZE and BLOCK_SIZE
|
||
|
* will delete when there is no 1GB flash
|
||
|
*/
|
||
|
#define NANONOTE_NAND_SIZE 2
|
||
|
|
||
|
#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
|
||
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
|
||
|
/* nand bad block was marked at this page in a block, start from 0 */
|
||
|
#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
|
||
|
#define CONFIG_SYS_NAND_PAGE_COUNT 128
|
||
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
||
|
/* ECC offset position in oob area, default value is 6 if it isn't defined */
|
||
|
#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
|
||
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
||
|
#define CONFIG_SYS_NAND_ECCBYTES 9
|
||
|
#define CONFIG_SYS_NAND_ECCSTEPS \
|
||
|
(CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
|
||
|
#define CONFIG_SYS_NAND_ECCTOTAL \
|
||
|
(CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
|
||
|
#define CONFIG_SYS_NAND_ECCPOS \
|
||
|
{12, 13, 14, 15, 16, 17, 18, 19,\
|
||
|
20, 21, 22, 23, 24, 25, 26, 27, \
|
||
|
28, 29, 30, 31, 32, 33, 34, 35, \
|
||
|
36, 37, 38, 39, 40, 41, 42, 43, \
|
||
|
44, 45, 46, 47, 48, 49, 50, 51, \
|
||
|
52, 53, 54, 55, 56, 57, 58, 59, \
|
||
|
60, 61, 62, 63, 64, 65, 66, 67, \
|
||
|
68, 69, 70, 71, 72, 73, 74, 75, \
|
||
|
76, 77, 78, 79, 80, 81, 82, 83}
|
||
|
|
||
|
#define CONFIG_SYS_NAND_OOBSIZE 128
|
||
|
#define CONFIG_SYS_NAND_BASE 0xB8000000
|
||
|
#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
|
||
|
#define NAND_MAX_CHIPS 1
|
||
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||
|
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
|
||
|
#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000
|
||
|
|
||
|
/*
|
||
|
* IPL (Initial Program Loader, integrated inside CPU)
|
||
|
* Will load first 8k from NAND (SPL) into cache and execute it from there.
|
||
|
*
|
||
|
* SPL (Secondary Program Loader)
|
||
|
* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
|
||
|
* has to fit into 8kByte. It sets up the CPU and configures the SDRAM
|
||
|
* controller and the NAND controller so that the special U-Boot image can be
|
||
|
* loaded from NAND to SDRAM.
|
||
|
*
|
||
|
* NUB (NAND U-Boot)
|
||
|
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
|
||
|
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
|
||
|
*
|
||
|
*/
|
||
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
|
||
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
||
|
/* Start NUB from this addr*/
|
||
|
|
||
|
/*
|
||
|
* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
|
||
|
*/
|
||
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
|
||
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
|
||
|
|
||
|
#define CONFIG_ENV_SIZE (4 << 10)
|
||
|
#define CONFIG_ENV_OFFSET \
|
||
|
(CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE)
|
||
|
#define CONFIG_ENV_OFFSET_REDUND \
|
||
|
(CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE)
|
||
|
|
||
|
#define CONFIG_SYS_TEXT_BASE 0x80100000
|
||
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||
|
|
||
|
/*
|
||
|
* SDRAM Info.
|
||
|
*/
|
||
|
#define CONFIG_NR_DRAM_BANKS 1
|
||
|
|
||
|
/*
|
||
|
* Cache Configuration
|
||
|
*/
|
||
|
#define CONFIG_SYS_DCACHE_SIZE 16384
|
||
|
#define CONFIG_SYS_ICACHE_SIZE 16384
|
||
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
||
|
|
||
|
/*
|
||
|
* GPIO definition
|
||
|
*/
|
||
|
#define GPIO_LCD_CS (2 * 32 + 21)
|
||
|
#define GPIO_AMP_EN (3 * 32 + 4)
|
||
|
|
||
|
#define GPIO_SDPW_EN (3 * 32 + 2)
|
||
|
#define GPIO_SD_DETECT (3 * 32 + 0)
|
||
|
|
||
|
#define GPIO_BUZZ_PWM (3 * 32 + 27)
|
||
|
#define GPIO_USB_DETECT (3 * 32 + 28)
|
||
|
|
||
|
#define GPIO_AUDIO_POP (1 * 32 + 29)
|
||
|
#define GPIO_COB_TEST (1 * 32 + 30)
|
||
|
|
||
|
#define GPIO_KEYOUT_BASE (2 * 32 + 10)
|
||
|
#define GPIO_KEYIN_BASE (3 * 32 + 18)
|
||
|
#define GPIO_KEYIN_8 (3 * 32 + 26)
|
||
|
|
||
|
#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
|
||
|
#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
|
||
|
|
||
|
#define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */
|
||
|
#define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */
|
||
|
#define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */
|
||
|
|
||
|
/* SDRAM paramters */
|
||
|
#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
|
||
|
#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
|
||
|
#define SDRAM_ROW 13 /* Row address: 11 to 13 */
|
||
|
#define SDRAM_COL 9 /* Column address: 8 to 12 */
|
||
|
#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
|
||
|
|
||
|
/* SDRAM Timings, unit: ns */
|
||
|
#define SDRAM_TRAS 45 /* RAS# Active Time */
|
||
|
#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
|
||
|
#define SDRAM_TPC 20 /* RAS# Precharge Time */
|
||
|
#define SDRAM_TRWL 7 /* Write Latency Time */
|
||
|
#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
|
||
|
|
||
|
#endif
|