mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 11:28:51 +09:00
293 lines
6.6 KiB
C
293 lines
6.6 KiB
C
![]() |
/*
|
||
|
* Copyright (C) 2011 Renesas Solutions Corp.
|
||
|
* Copyright (C) 2011 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
#include <common.h>
|
||
|
#include <asm/io.h>
|
||
|
|
||
|
/* Every register is 32bit aligned, but only 8bits in size */
|
||
|
#define ureg(name) u8 name; u8 __pad_##name##0; u16 __pad_##name##1;
|
||
|
struct sh_i2c {
|
||
|
ureg(icdr);
|
||
|
ureg(iccr);
|
||
|
ureg(icsr);
|
||
|
ureg(icic);
|
||
|
ureg(iccl);
|
||
|
ureg(icch);
|
||
|
};
|
||
|
#undef ureg
|
||
|
|
||
|
static struct sh_i2c *base;
|
||
|
|
||
|
/* ICCR */
|
||
|
#define SH_I2C_ICCR_ICE (1 << 7)
|
||
|
#define SH_I2C_ICCR_RACK (1 << 6)
|
||
|
#define SH_I2C_ICCR_RTS (1 << 4)
|
||
|
#define SH_I2C_ICCR_BUSY (1 << 2)
|
||
|
#define SH_I2C_ICCR_SCP (1 << 0)
|
||
|
|
||
|
/* ICSR / ICIC */
|
||
|
#define SH_IC_BUSY (1 << 3)
|
||
|
#define SH_IC_TACK (1 << 2)
|
||
|
#define SH_IC_WAIT (1 << 1)
|
||
|
#define SH_IC_DTE (1 << 0)
|
||
|
|
||
|
static u8 iccl, icch;
|
||
|
|
||
|
#define IRQ_WAIT 1000
|
||
|
|
||
|
static void irq_wait(struct sh_i2c *base)
|
||
|
{
|
||
|
int i;
|
||
|
u8 status;
|
||
|
|
||
|
for (i = 0 ; i < IRQ_WAIT ; i++) {
|
||
|
status = readb(&base->icsr);
|
||
|
if (SH_IC_WAIT & status)
|
||
|
break;
|
||
|
|
||
|
udelay(10);
|
||
|
}
|
||
|
|
||
|
writeb(status & ~SH_IC_WAIT, &base->icsr);
|
||
|
}
|
||
|
|
||
|
static void irq_dte(struct sh_i2c *base)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0 ; i < IRQ_WAIT ; i++) {
|
||
|
if (SH_IC_DTE & readb(&base->icsr))
|
||
|
break;
|
||
|
udelay(10);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void irq_busy(struct sh_i2c *base)
|
||
|
{
|
||
|
int i;
|
||
|
|
||
|
for (i = 0 ; i < IRQ_WAIT ; i++) {
|
||
|
if (!(SH_IC_BUSY & readb(&base->icsr)))
|
||
|
break;
|
||
|
udelay(10);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop)
|
||
|
{
|
||
|
writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
|
||
|
writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr);
|
||
|
|
||
|
writeb(iccl, &base->iccl);
|
||
|
writeb(icch, &base->icch);
|
||
|
writeb(0, &base->icic);
|
||
|
|
||
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
|
||
|
irq_dte(base);
|
||
|
|
||
|
writeb(id << 1, &base->icdr);
|
||
|
irq_dte(base);
|
||
|
|
||
|
writeb(reg, &base->icdr);
|
||
|
if (stop)
|
||
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr);
|
||
|
|
||
|
irq_dte(base);
|
||
|
}
|
||
|
|
||
|
static void i2c_finish(struct sh_i2c *base)
|
||
|
{
|
||
|
writeb(0, &base->icsr);
|
||
|
writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
|
||
|
}
|
||
|
|
||
|
static void i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val)
|
||
|
{
|
||
|
i2c_set_addr(base, id, reg, 0);
|
||
|
udelay(10);
|
||
|
|
||
|
writeb(val, &base->icdr);
|
||
|
irq_dte(base);
|
||
|
|
||
|
writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr);
|
||
|
irq_dte(base);
|
||
|
irq_busy(base);
|
||
|
|
||
|
i2c_finish(base);
|
||
|
}
|
||
|
|
||
|
static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
|
||
|
{
|
||
|
u8 ret;
|
||
|
|
||
|
i2c_set_addr(base, id, reg, 1);
|
||
|
udelay(100);
|
||
|
|
||
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
|
||
|
irq_dte(base);
|
||
|
|
||
|
writeb(id << 1 | 0x01, &base->icdr);
|
||
|
irq_dte(base);
|
||
|
|
||
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr);
|
||
|
irq_dte(base);
|
||
|
|
||
|
ret = readb(&base->icdr);
|
||
|
|
||
|
writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr);
|
||
|
readb(&base->icdr); /* Dummy read */
|
||
|
irq_busy(base);
|
||
|
|
||
|
i2c_finish(base);
|
||
|
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
#ifdef CONFIG_I2C_MULTI_BUS
|
||
|
static unsigned int current_bus;
|
||
|
|
||
|
/**
|
||
|
* i2c_set_bus_num - change active I2C bus
|
||
|
* @bus: bus index, zero based
|
||
|
* @returns: 0 on success, non-0 on failure
|
||
|
*/
|
||
|
int i2c_set_bus_num(unsigned int bus)
|
||
|
{
|
||
|
if ((bus < 0) || (bus >= CONFIG_SYS_MAX_I2C_BUS)) {
|
||
|
printf("Bad bus: %d\n", bus);
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
switch (bus) {
|
||
|
case 0:
|
||
|
base = (void *)CONFIG_SH_I2C_BASE0;
|
||
|
break;
|
||
|
case 1:
|
||
|
base = (void *)CONFIG_SH_I2C_BASE1;
|
||
|
break;
|
||
|
default:
|
||
|
return -1;
|
||
|
}
|
||
|
current_bus = bus;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* i2c_get_bus_num - returns index of active I2C bus
|
||
|
*/
|
||
|
unsigned int i2c_get_bus_num(void)
|
||
|
{
|
||
|
return current_bus;
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
#define SH_I2C_ICCL_CALC(clk, date, t_low, t_high) \
|
||
|
((clk / rate) * (t_low / t_low + t_high))
|
||
|
#define SH_I2C_ICCH_CALC(clk, date, t_low, t_high) \
|
||
|
((clk / rate) * (t_high / t_low + t_high))
|
||
|
|
||
|
void i2c_init(int speed, int slaveaddr)
|
||
|
{
|
||
|
int num, denom, tmp;
|
||
|
|
||
|
#ifdef CONFIG_I2C_MULTI_BUS
|
||
|
current_bus = 0;
|
||
|
#endif
|
||
|
base = (struct sh_i2c *)CONFIG_SH_I2C_BASE0;
|
||
|
|
||
|
/*
|
||
|
* Calculate the value for iccl. From the data sheet:
|
||
|
* iccl = (p-clock / transfer-rate) * (L / (L + H))
|
||
|
* where L and H are the SCL low and high ratio.
|
||
|
*/
|
||
|
num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_LOW;
|
||
|
denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW);
|
||
|
tmp = num * 10 / denom;
|
||
|
if (tmp % 10 >= 5)
|
||
|
iccl = (u8)((num/denom) + 1);
|
||
|
else
|
||
|
iccl = (u8)(num/denom);
|
||
|
|
||
|
/* Calculate the value for icch. From the data sheet:
|
||
|
icch = (p clock / transfer rate) * (H / (L + H)) */
|
||
|
num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH;
|
||
|
tmp = num * 10 / denom;
|
||
|
if (tmp % 10 >= 5)
|
||
|
icch = (u8)((num/denom) + 1);
|
||
|
else
|
||
|
icch = (u8)(num/denom);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* i2c_read: - Read multiple bytes from an i2c device
|
||
|
*
|
||
|
* The higher level routines take into account that this function is only
|
||
|
* called with len < page length of the device (see configuration file)
|
||
|
*
|
||
|
* @chip: address of the chip which is to be read
|
||
|
* @addr: i2c data address within the chip
|
||
|
* @alen: length of the i2c data address (1..2 bytes)
|
||
|
* @buffer: where to write the data
|
||
|
* @len: how much byte do we want to read
|
||
|
* @return: 0 in case of success
|
||
|
*/
|
||
|
int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
|
||
|
{
|
||
|
int i = 0;
|
||
|
for (i = 0 ; i < len ; i++)
|
||
|
buffer[i] = i2c_raw_read(base, chip, addr + i);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* i2c_write: - Write multiple bytes to an i2c device
|
||
|
*
|
||
|
* The higher level routines take into account that this function is only
|
||
|
* called with len < page length of the device (see configuration file)
|
||
|
*
|
||
|
* @chip: address of the chip which is to be written
|
||
|
* @addr: i2c data address within the chip
|
||
|
* @alen: length of the i2c data address (1..2 bytes)
|
||
|
* @buffer: where to find the data to be written
|
||
|
* @len: how much byte do we want to read
|
||
|
* @return: 0 in case of success
|
||
|
*/
|
||
|
int i2c_write(u8 chip, u32 addr, int alen, u8 *buffer, int len)
|
||
|
{
|
||
|
int i = 0;
|
||
|
for (i = 0; i < len ; i++)
|
||
|
i2c_raw_write(base, chip, addr + i, buffer[i]);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* i2c_probe: - Test if a chip answers for a given i2c address
|
||
|
*
|
||
|
* @chip: address of the chip which is searched for
|
||
|
* @return: 0 if a chip was found, -1 otherwhise
|
||
|
*/
|
||
|
int i2c_probe(u8 chip)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|