imx: mx6ul: support mx6ul 9x9 evk board
This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk,
the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are:
1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC.
2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk
supports 512MB DDR3
3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package.
This patch add the following:
1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size()
2. Introduce a macro is_mx6ul_9x9_evk using
CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL
part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work,
so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with
mx6ul_14x14_evk. And we have no way to dymaically checking this chip
is 9x9 or 14x14.
3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations.
POWER related configurations also effect for mx6ul_14x14_evk. But
power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to
do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk.
4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM
configurations.
5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file
according to board_rev and board_name.
6. Add TARGET_MX6UL_9X9_EVK Kconfig entry
Boot Log:
U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53)
reading u-boot.img
reading u-boot.img
U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU: Commercial temperature grade (0C to 95C) at 41C
Reset cause: POR
Board: MX6UL 9x9 EVK
I2C: ready
DRAM: 256 MiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC1
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 16:02:34 +09:00
|
|
|
CONFIG_ARM=y
|
|
|
|
CONFIG_ARCH_MX6=y
|
2016-09-13 14:18:39 +09:00
|
|
|
CONFIG_SPL_GPIO_SUPPORT=y
|
2016-09-13 14:18:41 +09:00
|
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
2016-09-13 14:18:43 +09:00
|
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
imx: mx6ul: support mx6ul 9x9 evk board
This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk,
the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are:
1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC.
2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk
supports 512MB DDR3
3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package.
This patch add the following:
1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size()
2. Introduce a macro is_mx6ul_9x9_evk using
CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL
part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work,
so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with
mx6ul_14x14_evk. And we have no way to dymaically checking this chip
is 9x9 or 14x14.
3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations.
POWER related configurations also effect for mx6ul_14x14_evk. But
power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to
do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk.
4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM
configurations.
5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file
according to board_rev and board_name.
6. Add TARGET_MX6UL_9X9_EVK Kconfig entry
Boot Log:
U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53)
reading u-boot.img
reading u-boot.img
U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU: Commercial temperature grade (0C to 95C) at 41C
Reset cause: POR
Board: MX6UL 9x9 EVK
I2C: ready
DRAM: 256 MiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC1
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 16:02:34 +09:00
|
|
|
CONFIG_TARGET_MX6UL_9X9_EVK=y
|
2016-09-13 14:18:44 +09:00
|
|
|
CONFIG_SPL_MMC_SUPPORT=y
|
2016-09-13 14:18:56 +09:00
|
|
|
CONFIG_SPL_SERIAL_SUPPORT=y
|
2017-03-14 02:48:42 +09:00
|
|
|
CONFIG_SPL_LIBDISK_SUPPORT=y
|
2016-09-13 14:19:02 +09:00
|
|
|
CONFIG_SPL_WATCHDOG_SUPPORT=y
|
2016-10-18 11:12:40 +09:00
|
|
|
CONFIG_VIDEO=y
|
2017-06-29 17:16:06 +09:00
|
|
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
|
2016-06-13 22:45:14 +09:00
|
|
|
CONFIG_BOOTDELAY=3
|
2016-10-18 11:12:37 +09:00
|
|
|
# CONFIG_CONSOLE_MUX is not set
|
|
|
|
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
|
2017-01-24 05:31:20 +09:00
|
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
2016-09-13 14:18:22 +09:00
|
|
|
CONFIG_SPL=y
|
2017-03-14 02:48:42 +09:00
|
|
|
CONFIG_SPL_EXT_SUPPORT=y
|
|
|
|
CONFIG_SPL_I2C_SUPPORT=y
|
2016-04-22 10:37:19 +09:00
|
|
|
CONFIG_HUSH_PARSER=y
|
2016-04-25 06:29:26 +09:00
|
|
|
CONFIG_CMD_BOOTZ=y
|
2016-04-23 05:41:25 +09:00
|
|
|
# CONFIG_CMD_IMLS is not set
|
|
|
|
CONFIG_CMD_MEMTEST=y
|
2016-04-25 06:29:26 +09:00
|
|
|
CONFIG_CMD_MMC=y
|
2016-04-23 05:41:25 +09:00
|
|
|
CONFIG_CMD_SF=y
|
|
|
|
CONFIG_CMD_I2C=y
|
|
|
|
CONFIG_CMD_USB=y
|
2015-11-11 22:39:33 +09:00
|
|
|
CONFIG_CMD_GPIO=y
|
imx: mx6ul: support mx6ul 9x9 evk board
This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk,
the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are:
1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC.
2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk
supports 512MB DDR3
3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package.
This patch add the following:
1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size()
2. Introduce a macro is_mx6ul_9x9_evk using
CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL
part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work,
so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with
mx6ul_14x14_evk. And we have no way to dymaically checking this chip
is 9x9 or 14x14.
3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations.
POWER related configurations also effect for mx6ul_14x14_evk. But
power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to
do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk.
4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM
configurations.
5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file
according to board_rev and board_name.
6. Add TARGET_MX6UL_9X9_EVK Kconfig entry
Boot Log:
U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53)
reading u-boot.img
reading u-boot.img
U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz)
CPU: Commercial temperature grade (0C to 95C) at 41C
Reset cause: POR
Board: MX6UL 9x9 EVK
I2C: ready
DRAM: 256 MiB
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
Net: FEC1
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
2015-09-06 16:02:34 +09:00
|
|
|
CONFIG_CMD_DHCP=y
|
2015-09-28 21:14:15 +09:00
|
|
|
CONFIG_CMD_PING=y
|
2017-04-27 13:27:55 +09:00
|
|
|
CONFIG_CMD_BMP=y
|
2016-04-25 06:29:26 +09:00
|
|
|
CONFIG_CMD_CACHE=y
|
|
|
|
CONFIG_CMD_EXT2=y
|
|
|
|
CONFIG_CMD_EXT4=y
|
|
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
|
|
CONFIG_CMD_FAT=y
|
|
|
|
CONFIG_CMD_FS_GENERIC=y
|
2016-09-22 04:55:48 +09:00
|
|
|
CONFIG_SPI_FLASH=y
|
|
|
|
CONFIG_SPI_FLASH_BAR=y
|
|
|
|
CONFIG_SPI_FLASH_STMICRO=y
|
2016-10-18 11:12:37 +09:00
|
|
|
CONFIG_FSL_QSPI=y
|
|
|
|
CONFIG_USB=y
|
|
|
|
CONFIG_USB_STORAGE=y
|
2016-02-23 14:55:42 +09:00
|
|
|
CONFIG_OF_LIBFDT=y
|